MUST DO THIS When installing coilovers or your car WILL BREAK!
HTML-код
- Опубликовано: 25 сен 2022
- Welcome to my channel this is Doug Machado, I'm a certified BMW technician, been a mechanic since I was 12 years old, I started when I used to live in Brazil where I was born. I came to the U.S when I was at the age of 17 years old and worked at independent mechanic shops in the U.S until I turned 21 and worked at BMW dealerships until the age of 28 and I now started my own business. On this channel you'll see modified cars, drift contents/builds, mechanical jobs and tricks, high performance cars upgrades. Please make sure to subscribe if you want to join me on this journey as I grow.
This particular video I talk about the must dos no one talks about when you're installing coilovers, critical simple steps that needs to be taken to prevent your suspension from breaking, Go Check it Out!! #g20
INSTAGRAM: dougmbmw?i... Авто/Мото
Subscribed for being one of the few that specified the bushing preload before torque-ing suspension components to the factory specs. Looking forward for future builds !
How do you get this car on jack stands without the front jack support that these cars don’t have
Please tell me how to get this car on jack stands my mother hit a curb and bent the front strut on her 2020 330i
did you have any problems with the electric dampening idk how to bypass them
Would I need to adjust lower control arms even with a couple inch drop from springs w/ factory struts?
Yes for sure, it’s called pre load the suspension.
Can you show how you got yours on all 4 jack stands? I can't find a front center jacking point on my M340i. Can it get jacked up in the front by the subframe? Even then I can't see much with the shield on.
I can’t speak on X-drive. But if you are RWD there is a half circle with two screws inside of it just forward of the oil pan access. This marks your front center jack point. As determined by BMW tech manual. I’ve lifted from here 6 times now with zero issues.
@@AGBoost I actually saw that on bimmerpost. I'm gonna try it when the time comes around for doing the donwpipe. For now it's just oil changes on rhino ramps.
@@AGBoost Just did lifted my car this way to do an oil change. Drove over some 2x4s to get some height first. The center jack area looks slightly different between the rwd and xdrive.
@@BenDover-io9vg I actually made makeshift ramps out of 4 2x8s and angled the edges to make the easier to drive up. I do the same. Drive up the ramps, jack the center point, and place jackstands with adapters.
Arregaca nene