🏅 Benny's Barra-swapped, 1200hp, 8sec Mustang | HALTECH HEROES
HTML-код
- Опубликовано: 4 июл 2024
- #haltech #barraswap #foxbody
This is a story about a Foxbody Mustang, an Aussie icon of an engine, and not one, but two Bennies. All those came together to form a powerful, consistent, and formidable team that ended up taking the "Fastest Six Cylinder" trophy at the 2019 DragWeek. But there's so much more to this story.....
What's your favorite engine/car combo? Let us know in the comments section!
Recommended watching:
Benny's DragWeek Vlog: • Drag Week 2019
The Skid Factory Build Vlog: / @theskidfactory
00:00 - Intro
00:22 - Build History
03:40 - DragWeek Recap
05:50 - Engine Overview
09:14 - Fuel System
09:55 - Drivetrain
11:10 - Interior
11:50 - Engine Management
13:45 - Was it all worth it?
14:28 - Thinking of building a Barra drag car? Benny's word of advice
16:05 - Final words and shameless plugs
-----------------------------------------------------------
Liked this video? Here are more like it:
What's So Special About Barra: • 🤔 What's so special ab...
MCM Barra powered 9sec Cresta - • 💬 Mighty Car Mods Cres...
How to set up your Barra Pro Plug-in ECU: How to install Barra ECU
Barra Pro Plug-in ECU Explained - • 🔍 Plug'n'Play ECU for ...
------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~~~~~~~~~~~~~~~~~~~
WATCH NEXT: Anniversary Build-Off Episode 3 - the final countdown: • 🔧 BUILD OFF - Turbo vs...
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~ Авто/Мото
What's your favorite engine/car combo? Let us know in the comments section!
If you like this build we highly recommend visiting the Benny's Custom Works and The Skid Factory channels and checking out their build and DragWeek vlog on this car:
Benny's DragWeek Vlog: ruclips.net/p/PLS7Uibxnav37DZtbgZwKL7HZB6euZ0EAz
The Skid Factory Build Vlog: ruclips.net/channel/UCFUBt5_cGJpt58XBIh4RtNA
This is a story about a Foxbody Mustang, an Aussie icon of an engine, and not one, but two Bennies. All those came together to form a powerful, consistent, and formidable team that ended up taking the "Fastest Six Cylinder" trophy at the 2019 DragWeek. But there's so much more to this story.....
00:00 - Intro
00:22 - Build History
03:40 - DragWeek Recap
05:50 - Engine Overview
09:14 - Fuel System
09:55 - Drivetrain
11:10 - Interior
11:50 - Engine Management
13:45 - Was it all worth it?
14:28 - Thinking of building a Barra drag car? Benny's word of advice
16:05 - Final words and shameless plugs
This is it. Bara foxbody mustang.
1980 Toyota corona with 22r and a 5 spd. Best car ever.
2JZ in a JZA80 Supra.
Yeah on a order of 40 blocks it took over 2 months and one 20 have shown up
Lol
Meeting Ben Neal in 2018 was a blast
honestly with hindsight if the F6 Ute had of got out of customs we probably would of failed to finish (it blew a box on trip home from QLD on return trip)
I asked Ben to build us a Drag Week car to enjoy and finish the week
He more than delivered
results speak for them self's
Massive thanks
Phil Neal
Ben Neal
Ben Wood
Allan Butler
Al drinks all the beer
Valve springs, oil pump, Pistons and rods and 1200hp is pretty wild. Most engines including the 2jz would require more money to get up to that hp reliably.
Anything with a Barra under the hood is my favorite combo
XR6T. Such a shame, no longer made. We didn't know what we had, until was gone..
Great video :)
Thanks guys!
From 1979 to 1982 the Fox Body Mustangs had a 200 (3.3L) Inline Six in them as one of 4 engines you could get. So the Barra make perfect since to slide right in one of them.
So true! We kinda wish the new Stang came with a Barra too instead of the four....
@@haltech Gutted the Barra wasn't available in the UK the falcons would have sold well to tuners and there RHD.
Al's hand are magic, with Benny are combo double. Stoked watch build vlog at TSF. Ford mustang with barra from another ford, spicy...
I miss the collab of bcw, haltech, mcm, and the Turbo Yoda...
It's hard to do collabs during COVID, but don't worry, things are looking up:)
@@haltech miss you guys.... Can wait to see all of you in one show...
You left out Keith Urban.......
LOL and the Wolverine!
@@haltech great news, 2021 is looking up then...!
We need more Baras in the States!
They're starting to flow in but still nowhere near as easy to get as LS, SBF etc... hopefully that'll change soon. Can't wait to see big power Barras Stateside:)
@@haltech don't send them all there! Save some for AU and NZ :P
we are kinda hoping aftermarket manufacturers will soon step up and start making billet blocks etc...
It is a real numbers game, and as it was only an Aus thing and ended production, supply is only going to get smaller.
I have 36 Barras here in Gainesville Florida
Barra the world
Such a unique badass build
The front of the fox body always reminds me of the XF falcons, even the dash
There are definitely some similarities there! Must the 1980s styling:)
@@haltech well it was a great decade 😁 👍🏼 another great video well done
Thanks:)
Funny you say that, because I think XF Falcon reminds me for the Fox Body Mustang. 🤔😁
Great Vid Guys!, Haltech for the Win!!!, Benny (2) Has some awesome advice that needs to be listened to for anyone contemplating a Barra,
Looking forward to doing a video on yours when it's finished:)
what a great vid . . many thanks
Another Awesome Barra Build Boi'z👏👏
If they still made Cortinas but didn't rust out barra that !! Should fit straight in ..make a great combom !!!
Al Butler doing Al Butler stuff, without a lemon squash. Too expensive to ship over, unless you hide them in the cylinder bores. Hope the crew come stateside again soon.
I keep trying to tell these boys, ol girl needs a Baseline Suspension 'Outlaw' rear arm kit, the adjustability would help them get more aggressive off the line. They're a nice setup to work with. Those old school lift bars work - but Baseline's adjustable setup works better!
REEEEAAALLY want this car... or maybe I just need a Barra...
Ford! Put this engine in the new ford bronco!!!
Yep.
I’m a kiwi incandescent live for this
Awsome machine 💪👌👍
Great job, guys!
3:12 turbo yoda
Ford or Holden....
You can't possibly argue with the barra.
Designed engineered built here in Australia.
No ls
absolutely froth the 4L badge off an e series? on the front guards, nice touch
Also you can't see it in videos but it has a wicked pearl in the paint
You can see it better in pictures, but nothing beats seeing the beast up close:)
www.haltech.com/a-marriage-made-in-heaven-barra-powered-foxbody-mustang/
When you mix a emu and a bald eagle together
What really shocked me was when you said a VE SS commodore radiator was used on a 1200HP 8s drag car. Is the OEM VE SS radiator that good?
I totally have an extra Fox shell you could’ve picked up in Texas
Came here not knowing what a Barra was....left wishing we had Barra-goodness built into Fords in the US lol
You'll be happy to know that Barras are starting to trickle into the US, so you'll be seeing plenty more of them eventually! :)
@@haltech That would be really cool :) Gonna be watching!
Haltech unfortunately ford has stopped making barras and falcons are steeply rising in price in Australia
I can’t believe he forgot were the car came from and who built it . Naples Florida and it would be faster with the old set up I had in it I had it in high 4s with only spraying 250 shot and built it to hold 600 shot
Now I live in the US I have the chance to buy an 85 turbo coupe thunderbird could I Berra swap this thing? I know the t bird and Foxbody are are practly the same.
Foxdbarra in Amera
I can't believe that car is still running SSM lower control arms. Not only do they bind a lot, but they also have instant center brackets that raise your instant center a whole lot. They would work much better if you lowered the car more. Try to get the lower control arm parallel with the floor at ride height.
1.2 60ft’s don’t lie :D
@@BennysCustomWorks That's what I figured, that's what we could get out of them back in the day. You can go a bit quicker if you correct the geometry. You can apply a bit more wheel speed off the hit and keep the front end down while you apply more boost earlier. As an example, my 4.6 2V ran 1.13's on a 275/50 ET Street @ 3120lbs using the TeamZ stuff.
can I have that motor you pulled out for research purposes for my 92 gt
Nice and cool engine go up to 1000000 km.it shows reliability
Can produce up to 1800 hp
Shows how strong it is .
Originally coming from FORD FALCON AU
Master piece of TAXI in Australia till 2016 . Until stop production of it in Geelong Ford manufacturing factory .
End of fine and reliable engine in 2016.
I wish we got the barra in the states ☹️
There are few places that import them now. Along with wiring and other bits and pieces.
This is what they should have done to the mustang in Tokyo drift. The billet block can get you to 2500hp can’t you.
Stock block well handle that power there a few around now
When are they coming back up?
The whole COVID thing messed up everyone's plans, but Benny is pretty keen to come up again.
Being a Nissan guy, it always looks weird when the intake is on the right.
Any way to get A Barra here in the USA
We are starting to see a few companies importing them now, but we can't recommend one off the top of our heads.
Does MCM still own the Evo IX?
Not any more
why a N/A barra?
What would it cost to Bring BARRA to the Caribbean, would like to get one
You would need to contact one of the Australian exporters to check.
A low k Barra engine from FG series falcon could cost around $1000 in Australia.
Wow... second! :P
Sick car, good work boys. Man the narrator reading is annoying to listen to though
Race Adam lz
Adam doesnt do great in the 1/4mile or any kinda drag racing tbh, boostedbois kyle would be a good race
But its auto not very exciting if u ask me.
@@bighomieJ5X A mid 8 second car is not exciting?
@@theskidfactory mid 8's ain't hard to do with 1200 + hp and a glide 🤷🏾♂️
@@bighomieJ5X wheres your mid 8 car?