Renault Trafic / Vauxhall Vivaro 1.9 CDTI non start fault code 1809 fixed
HTML-код
- Опубликовано: 16 окт 2024
- Investigating and fixing a 2005 Renault trafic 1.9 CDTI (same as the vivaro) non start fault. Fault code 1809 fuel pressure sensor circuit stored in ECU. Engine would turn over but not fire up , no fuel pressure at the injectors. Fault fixed by replace the fuel pressure sensor in the rail.
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check out the diagnostic machine I use - diydaly.co.uk/...
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
New Fuel pressure sensor Ebay - ebay.us/u6luqb
Tools :
Multimeter (Fluke115) - ebay.us/DZIyJT
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Needle nose pliers - ebay.us/272Psu
Check out my other Vauxhall / Renault videos :
Vauxhall : • Vauxhall
Renault : • Renault
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. www.youtube.co...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!
New Fuel pressure sensor Ebay - ebay.us/tve1Jt
Tools :
Multi meter - ebay.us/fvsMub
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Needle nose pliers - ebay.us/272Psu
Check out my other Vauxhall / Renault videos :
Vauxhall : ruclips.net/p/PLDTPJANi9HjqQOjkgvfEDuF2tbgOpgZuc
Renault : ruclips.net/p/PLDTPJANi9HjrkE0q8cjDi87PhuVtz2l-i
Nice. Had a no start problem, watched this video, identified my pressure sensor and... The connector was totally loose! It's not locking into place, but as soon as I pushed it in, I got life. Was seriously considering having it towed but it turned out to be that simple.
Nice one! Thanks for the tip .. much appreciated 😀👍 glad it helped you 👍🙌
Nice diagnosis. Thanks for taking the time to video.
Thanks trev 😄👍
Clearly and well explained thankyou
Glad to help 👍
Great clips very thorough and informative thank you
Very welcome, thanks 👍👍
I’m getting a po191-c Fuel Rail Pressure Sensor Circuit
Range Performance fault. Brand new sensor. Followed your diagnostic procedure but I am getting 7.5v on the signal wire, you are getting 5v. Signal and ground wire test good. Any ideas on this ? Thanks 🙏
Hi mate,
What does it mean if the feed wire only reads 1.5v.
The signal reading is fine just the 3rd pin.
It's the same for the feed wire for a few sensors.
The van battery is full. It was driving and died as I was driving off my drive.
Pull on the wires there is a good chance you have a broken wire just a bit back from the plug
With the connector off, I got 5 volts on both pins, rather than 5 volts and 4.7 volts. Is that within tolerance ? Thanks.
Very helpful thanks.
👍👍
2.5 traffic 2005 won't stay running and stalls I have 9 different fault codes. Could this be ecu? Or circuit breakdown?
Yea but can it be the blue rellay ? I mean the yellow cable from it ?
Nice video very well explained top job👍
Thanks Kev! 👍👍👌
Thanks
I have Renault trafic 2001 non starter it has same switch, however fuel is getting up to and past injectors, can switch still be faulty?
yes could still be the switch
I had a VW Golf 1.4 tsi twin charge with snapped fuel pressure sensor. I bought a second hand one, did not work. so I bought a new one off ebay for thirty pounds ,that did not work. Then I bought a genuine bosch unit, and there you go, works. lesson learned, don't be a tight arse and buy the genuine part. it was only five pounds more. (the pound sign on my laptop is broken)
haha! I know the feeling 😖 been there before , also been sent down the wrong route after fitting second hand bits and not realising they were faulty.. Had an ABS unit sent to BBA reman once (they said it tested ok) spend another 2 days checking wiring etc.. was sure it was the pump.. fitted a new pump and Bingo! fault cured. Must admit I do always try get at least (middle of the road) brand parts now , doesn't take many issues for you to loose confidence in cheap parts does it 😂
@@diydaly Had issues with bba here, sent me round the houses more than once, use another firm now, so far so good.
@@toeknee6588 yeah same mate, we've gone to ECU testing now 👍
@@diydaly snap!
Hi same problem changed sensor got the right voltage on feed and signal and got a ground. But still fault code up and won't start
Have you checked the primer pump to make sure it’s not split?
What is the Bosch Part Number for this sensor?
Thanks , I’ve attached a link to the same one, the Bosch number is on the link mate ebay.us/u6luqb
Diolch!
Many thanks, I'll be checking mine in the morning. I am getting poor slow starting and surging throttle . No boost leaks found so I would be guessing but hopefully this might have saved me wasting my money at the worst
Thanks , hope it might help, be worth checking for any air leaks into the fuel system
@@diydaly cheers for the reply. It definitely is harder to start on colder days and need to get it sorted before I kill my battery in winter. I may swap all the horrible plastic fuel pipe for some rubber as the quick fittings are rubbish too
@@karlmyers6518 yeah there usually too bad tbf though mate, the most common area is the primer bulb
@@diydaly I don't have a bulb on mine for some reason but if it is and air leak it on sucks in when the fuel pressure drops off after being switched off. Might be tomorrow before I get on it looking at this weather
@@karlmyers6518 👍
O i you show us how easy it is to find then you rip people off when you fix it plit ars mcannics
Hi
Replied to other message