Nice, had the same wheels spacers, no issues (no issues two years of use). I removed them when I got wheels with -14mm offset, it's the equivalent of the stock wheels with 2-inch spacers.
You got one of the highest strength loctite they have. It will be fine if you don’t take the spacers off but if you need to you will need to heat them up with a torch. Blue loctite can be worked with hand tools and red will destroy threads if you don’t use a torch first to heat the studs.
A lot of guys here in TN with Rams do the same setup and have great results for both looks and usage. I'm about to do the same thing to my Ram, as well. I've ridden in and driven those same Rams, aforementioned, and they felt stock to me 🤷♂️😎
I don’t have a ram, but I have a 3rd gen ranger that I’m wanting to add 2” spacers onto. Thanks for this video! I really love the look of your truck with those spacers!
I just installed Rough Country 2” spacers with stock rims and 35s. 2017 Ram 1500 Big Horn. Heavy rubbing against the plastic wheel well and it’s not even a full turn. I’m actually considering taking them off. How is it that it’s not rubbing for you? You have stock rims too.
Damn I like that look! Great video. I have a 2015 express blacked out with Nittos and the same rims you have but black. Are the tires 12 1/2 inch? Trying to see how wide I can go because I need new tires soon. Think I’m going to do these spacers. Also what is the exhaust?
I just bought 35x12.5 for my 2020 ram and installed a 2" level. I want to do a 2" spacer also. Just wanted some feedback to see if any rubbing issues would happen on a full turn lock position L and R would happen. Nice truck by the way
I'm wondering the same thing. I put 2 in spacers on my 09 ram 1500 3 in level kit on 35x12.5 and I would need to cut out some fender to make these babies not rub. Curious as to what all to cut out, and how to make it look good after so it's not just a hack job
@@crisguzman9 if you got this generation ram then 35s will fit without a lift or level kit .. I got a 2014 stock suspension with 35x12.5x20 and no rubbing at all
Hi! I’m about to set spacers on my 2004 ram 1500, I just would like to know how often you have to re-tighten/check the spacers after installed them using red Loctite?
Clean truck bro, stance looks way better👌🏻 how are you liking the supreme suspension spacers, thinking on getting some for my Silverado off Amazon as well
Bro, they are beast. I highly recommend buying them! They’re solid, and good quality spacers. The truck feels a bit more stable too! If you’re on the fence, just gettem’ bro! 👍🏽 you won’t regret it.
It's not them moving it's the studs u put ur rim/tire on break a lot cause of the weight or more quality made. Urs should be fine from how much u paid for them .
Nice, had the same wheels spacers, no issues (no issues two years of use). I removed them when I got wheels with -14mm offset, it's the equivalent of the stock wheels with 2-inch spacers.
Dope 😎 -14mm offset wheel are for big boys. Good shit bro
Damn spacers do give it an entirely different look
Hahaha “you can use a fuckin idk… breaker bar?” I was like hahaha yeah I like this guy
Just seen the vid. I know its 2 years later. But I just leveled my 2014 Ram 1500 added 2" spacers with stock rims and 35x12.5x20's 😍
😎🤙
You got one of the highest strength loctite they have. It will be fine if you don’t take the spacers off but if you need to you will need to heat them up with a torch. Blue loctite can be worked with hand tools and red will destroy threads if you don’t use a torch first to heat the studs.
How about when I have to replace my rotors. Do you recommend blue or red loctice?
Blue without question. Red will ruin threads as described above. Red is for permanent. Very rarely used in the automotive world.
A lot of guys here in TN with Rams do the same setup and have great results for both looks and usage. I'm about to do the same thing to my Ram, as well. I've ridden in and driven those same Rams, aforementioned, and they felt stock to me 🤷♂️😎
I don’t have a ram, but I have a 3rd gen ranger that I’m wanting to add 2” spacers onto. Thanks for this video! I really love the look of your truck with those spacers!
Thank you for this video. I've been wanting to add spacers and bigger tires to my truck for a while and will likely replicate your setup!
Hell yeah ! 🤙
My truck is lowered, and I'm installing 1.5" spacers. I'm also looking at fender flares.
Waiting for the snow to melt in BC and putting my 35s 2 inch wheel spacers too Ram 1500
Nice truck man, super clean.
Thanks 🤙
Did you get any rubbing after installing the spacers?
I’m gonna ad 2” wheel spacers and see if the rubbing stops after that.
Looks really good
It looks super nice bro ..
Put a 4 inch lift with 35 inch muds on. Just ordered 2 inch spacers. Thanks for sharing.
Nice bro!! liked how u explained every thing real shit! I wonder how much of a difference in looks is between a full 2in to a 1.75 spacers?
It’s a full 2”. The spacer measures exactly 2” 💯
Love the look
Looks a lot more aggressive
Look very good my frend
I just installed Rough Country 2” spacers with stock rims and 35s. 2017 Ram 1500 Big Horn.
Heavy rubbing against the plastic wheel well and it’s not even a full turn. I’m actually considering taking them off.
How is it that it’s not rubbing for you? You have stock rims too.
beautiful truck
Damn I like that look! Great video. I have a 2015 express blacked out with Nittos and the same rims you have but black. Are the tires 12 1/2 inch? Trying to see how wide I can go because I need new tires soon. Think I’m going to do these spacers. Also what is the exhaust?
Yup 12.5”
Looks good
Blue loctite my Boi. But great video man. Appreciate you. 💯
I just bought 35x12.5 for my 2020 ram and installed a 2" level. I want to do a 2" spacer also. Just wanted some feedback to see if any rubbing issues would happen on a full turn lock position L and R would happen. Nice truck by the way
I'm wondering the same thing. I put 2 in spacers on my 09 ram 1500 3 in level kit on 35x12.5 and I would need to cut out some fender to make these babies not rub. Curious as to what all to cut out, and how to make it look good after so it's not just a hack job
did you have to lift the truck for the 35s to fit ? i just got some 35s
I already had the level kit installed before I put the 35s bro
@@shoobiedoubie6871 do you think without a level kit they would still fit on stock height
@@crisguzman9 Yeah, I think they might, these trucks have a ton of space in the wheel wells
@@crisguzman9 if you got this generation ram then 35s will fit without a lift or level kit .. I got a 2014 stock suspension with 35x12.5x20 and no rubbing at all
I think I’m going to have to get some wheel spacers
One hell of a bang for your buck ! 🤙🏽
@@shoobiedoubie6871 yes sir, they look so good on your truck I just put 35s on today
Love the truck!
Any problems at all ? Death wobble or anything. About to put a set on my 2019 Ram 1500.
No sir, just make sure to tighten them 👌🏼
Hi! I’m about to set spacers on my 2004 ram 1500, I just would like to know how often you have to re-tighten/check the spacers after installed them using red Loctite?
Mine had 2” spacers when i bought it, it rode like shit on the highway
That sucks. We’re they cheap eBay spacers?
I love it & I’m about to do it on my truck today . Waiting for this night to go over and I’m about to start work on my 2020 Dodge Ram ...let’s do it
Hell yeah ! Good shit Bawa ! 💪🏽
Did you have any problem with balancing the tires or alignment ?
Yeah, alignment was a bit out of wack.
What tires are those? I like the look
Don't quit your day job hector
Clean truck bro, stance looks way better👌🏻 how are you liking the supreme suspension spacers, thinking on getting some for my Silverado off Amazon as well
Bro, they are beast. I highly recommend buying them! They’re solid, and good quality spacers. The truck feels a bit more stable too! If you’re on the fence, just gettem’ bro! 👍🏽 you won’t regret it.
Beautiful, nice set up
Got 2.5 level kit,275/65r20 renegade hybrid tires on my 2019 ram I'm guessing 2 inch spacers will be the final touch 🤔 what do you think brother?
Yessir ! 🔥
I just did the same on my 2011 single cab.
What maximum speed do you run with your spacers on?
The speed regulator won’t let me go over 107 mph. So 107 mph 😂
I saw the same ones online, been thinking about getting them. Since it’s been a year how have you liked them? Any problems?
Nope, they’re amazing, made the truck look beast and I didn’t lose any of the turning radius 🤙
Did it rub during turning/backing up after the spacers?
Nope, only at a full turn and if I hit a little bump in a parking lot or something like that.
You should change the rims to some dope ones and it will be complete
Any issues putting a 12.5 wide tire on a 9” wheel
Those rims are the stocks. And I have had any issues 👍🏽
I have 24’s sitting on 35” tires, have you had any issues?
No sir 😌, have you?
@@shoobiedoubie6871
Yes my tires rub the plastic wheel well liner whenever I cut the wheels all the way to the left or right.
@@Tdub66 try a 3” level kit. It’s super easy to install.
use heat gun push the plastic in more. no cutting if you don't have too.
Have you had any issues with your spacers failing?
Nope, and I drive like 30k -40k miles a year 🤙
@@shoobiedoubie6871 Nice man thanks!
It's not them moving it's the studs u put ur rim/tire on break a lot cause of the weight or more quality made. Urs should be fine from how much u paid for them .
Are they still working good? Any vibration at higher speeds
They’re still good bro 👍🏽 I havnt noticed any vibration. And I drive about 100 miles a day
What lift kit do you have on your truck?
Rear has a TufTruck variable coil spring, and the front has a 3” leveling kit from supreme suspensions.
How are the spacers I go 3o5 55 20 on mines
Makes the truck handle turns a bit better because it’s wider now 👍🏽
looks pimp bro
Do they rub with the spacers whe u turn?
No sir
What size socket are you using ?
Nice , what’s the level on your truck bro?
This was 2.5”, I have a 3” now and it’s WAY better 😎
@@shoobiedoubie6871 nice you should post another video
I have 35 on with nothing on and it rubs just a bit
Same for me i got a 14 ram 1500 stock height and rims
@@anthonylamas121 clean
how wide are the wheels?
Rims are stock tires are 35 x 12.5 I think.
Kenda Klever M/T
Is the front a 3 inch level? I am about to do the same set up
Yes sir a 3” level kit
@@shoobiedoubie6871 cool how often do you tighten your wheel spacers?
@@nelktwo honestly never, except like 2 months ago when I changed the brake pads and rotors.
@@shoobiedoubie6871 do you still fit in the automatic car washes bro?
@@nelktwo if you’re talking about an express car wash like the ones that you have to go into neutral and it pulls you thru your wheel, yes sir 🤙🏽
what brand tire are you running stance looks good
Kenda Klever MT. They’re dope, I got about 60k miles off my last set
@@shoobiedoubie6871 are they loud on the road
@@huntingaddicts7546 not at all 😎
I have those exact same tires. I love them.
Sweet
Do you need spacers to run 12.5 wides?
Uhhh no 😂
Just buy new rims to get new offset
Never the less
Dond radicas bro??
South Central 🤙🏽
I don’t have a fuckin breaker bar. But I do got a fuckin impact fuckin gun lol
What type of tires?
Kenda Klever M/T
35”
2in lift ?
3 “ level in front only. Back is stock
Did 35” tires fit stock bro?
I also have a Ram and bought 33s thinking I wouldn’t fit 35s on stock but I cleared 33s easily, so yes 35s would fit
@@imabeastatsoccer1 what brand did yo ho with ??
@@drufetti510 aturro x/t. Kinda noisy not gonna lie but really nice aggressive look
@@imabeastatsoccer1 Where did you get the tires from bro? I had Atturos before on my scatpack
@@drufetti510 the ones I got are Kendra Klever MTs
Who jacks up a truck there 😂
LOOOOOOOOOOOOOL
Chinese makes the same ones for $50
Nahh fck that go all the way 6ich on 24s 35 tires..
I had 24s before. Too heavy, and I felt it made the truck a bit slower.
With a 4 inch lift🥴
Mine is just leveled.
Do you rub bro ?
Nope 😌, but I’ve never hit a bump or dip while turning? But I’ve had the spacers for about a month now, and I haven’t rubbed once 👍🏽
Says I’m a thug like that bc he has a Milwaukee then proceeds to use gloves and red locktite. Good luck ever getting them off.
Looks good