🚨The VPN's I recommend: ✅ 75% Discount IPVanish - www.techdoctoruk.com/tdukIPvanish 🤯Jailbreak your Firestick with the BEST apps - ruclips.net/video/ac_DZYA0pRA/видео.html 📌 Sub to my 2nd channel for updates and breaking news - ruclips.net/channel/UCyELHBcUipxHPZEtToZrdZg
Are you using the latest Firestick 4k Max Pro (OS8)? on my device (OS8) - disabling sleep with ADB command is accepted but Firestick still goes to sleep.
Yep - same behaviour here on Firestick 4k Max (2023 ver). The "two commands via ADB" trick (which is detailed all over the internet) seems to have stopped working.
The Firestick OS8 (Latest) has under Settings --> Display & Sound --> Ambient Experience --> Advanced Mode --> an option to change when the device goes to sleep from 15 minutes to 8 hours @@ZomBeeQueeen
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV Also note that on some devices you will get an permission error when entering Instead type You can check if it worked with typing You should see the value you entered before, in this case 0
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Just beware that the HDMI port on some screens can put the connected device to sleep when the screen shuts off. Its an hdmi command on the screen settings, so maybe check and change that.
Very easy to sort got my Firestick split to Many tvs running via a hdmi to Av convertor to loads of tvs and kept going to sleep because it didnt think it was being watched as the hdmi control must have sent it to stby as explained the amazon new update wont allow adb direct so I DL on my Mobile as instructed and got the local ip from my settings and tested to 10milli sec and worked a treat.....think ill join your VIP Cheers mate and thanks V clear instructions
i went through this and followed all the steps, but at the 3:48 mark when you click connect, i don't get that pop up, I get a "connection failed". Does this not work anymore?
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
@TechDoctorUK I used the adb method and didn't get any errors. I used the adb get command to check and the 0 value stayed. I tried StayAlive. It seems to keep the screen saver from launching, which keeps it from sleeping, but then you don't get to enjoy the Ambience screen saver and you have to relaunch StayAlive everytime you reboot. If I can't find a solution I will return this firestick to Amazon. Can you help?
I have mxq pro 4k 5g (rockchip processor rk 3228a box), screen saver is not working (never turns on)in it. What will be the adb bcommands to turn on screensaver ?
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Mate...For 2nd generation Firesticks, given that at each restart or shutdown the commands sent with adb (see sleep), it would perhaps be appropriate to create an app that starts when the FireTV boots and that creates the commands not to send the FireTV in sleep mode.... a little idea. You have some news ?? Thank
Thank mate but i buy new FireStick 4K MAX (2023) this system run only one time..infact when reboot Firestick all parameters comeback to default...there is FIX for new firestick 2023 ? or there is a new method for New Firestick 4K MAx (2023) ????
Can confirm - the old trick in this vid doesn't work on the ver 2 (2023). The OP suggested "dumpsys deviceidle disable" sent in the same way (ADB shell command) but haven't tested as trying Stay Alive!
Stay Alive! works fine on the Firestick 4K Max ver 2 (2023). Remember though, that it doesn't autorun (i.e. if you reboot). You need to click on its icon, then it is running (there is no confirmation it has started, though)
use [Fire TV Max + Bluetooth speaker] as an Internet Radio To prevent this Radio from falling asleep when you turn off the TV, Fire TV Max is connected to the TV not directly, but via an HDMI switch (1 input 2 outputs). the second output goes to another TV Fire TV Max continues to work when the TV is turned off .
Nice video, but I would like to know if there is a command to force my Firestick to turn off my TV when it goes to sleep. My nvidia shield when it goes to sleep my TV goes off completely, and also my onn box. Firesticks only turns the screeen black, but the TVs are still on.
I have a question I just did this on my fire stick 4K and I did it for one second just to try it out and it worked but how do you turn it off if you want to because I even unstalled the app and even installing the app it went into sleep mode one second even no the app was unstalled so I had to reinstall the app and did it again this time I said it for zero and now it's staying on and if I ever want to turn this feature off how do I do that thanks
I have a Firestick 4kmax 2nd generation and it doesn't work on mine. I downloaded remote ADB Shell and it shows Nothing in top line so I copied what you had, "localhost" but it says Failed to connect.
I keyed it in yesterday but firestick just went to sleep. i’m assuming you don’t have to leave the remote adp shell app open always, right? when i just looked, the command line isn’t there, but i had closed the app last night
No, you dont need to keep the remote adb shell app open. Just ensure that you have entered in the command as shown and there were no errors when you pressed go.
Whenever I start the ADB shell and have the localhost for the host name and 5555 as the port ADB shell says Please make sure the target device has network ADB enabled. I also made sure debugging on my device is enabled and it is. Does anyone have any troubleshooting tips or ideas?
I just bought a fire cube 3 gen and a brand new flash drive 64 GB. I tried to put my flash drive via a usb hub but then the fire cube wonˋt detect my flash drive. If I put the flash drive directly in it stays connected. Will this method work so that I CAN USE A USB hub?
@@TechDoctorUK I have been experimenting. If I go to the home screen it goes to sleep within minutes But when I opened RUclips and started a vid, Paused it and left it for an hour, the Firestick did not go to sleep. Sooooo, I am assuming the firestick is displaying correct behavior from the command line. YAY!!!! 🤗
@@carlyvess8404 Ok that is good feedback. Lets see if we can stop the device going to sleep, even from the homescreen. Try this command: dumpsys deviceidle disable let me know
Stay alive doesn't work for me. Really hoping the adb method works. Playing plex music library and firestick falls asleep in the middle of songs. But, I really thank you for this video.
It does not work for me because the moment that I open up remote ADB shell it prompts me to put in my IP address or host name I don't know where to find the IP address of this device the fire stick and I don't know what the host name is cuz I doubt it's fire stick
It won't let me edit I found the IP address but now it just says connection failed like shitting in my hands and clapping this is retarded and and probably won't work anyways thanks bud for making me do nothing
I've never had any luck using keep alive unless they have fixed it? This adb is way better than what I used to do. The way I originally did this was run adb on firestick and connect my pc running a 3rd party app to change the settings. The reason I changed the setting is that when I listen to tidal, it would go to sleep and the music would stop. Love the content 👌 Thank you.
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
I never had an issue til i activated the Radio addon in Kodi. My Firestick thinks the streaming music is "inactivity" and goes to sleep in 20 minutes. The "Stay Alive" app fixed this. Thanks!
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
didnt work at all.. your website is so banner laden its hard to navigate, and if you dont pay attention theres "download" buttons all over the page.. what a load.. dont waste your time.. thumbs down.
🚨The VPN's I recommend:
✅ 75% Discount IPVanish - www.techdoctoruk.com/tdukIPvanish
🤯Jailbreak your Firestick with the BEST apps - ruclips.net/video/ac_DZYA0pRA/видео.html
📌 Sub to my 2nd channel for updates and breaking news - ruclips.net/channel/UCyELHBcUipxHPZEtToZrdZg
Hi Tech Doctor UK can you please help in solution for Launcher manager automatically uninstalled
Does this process override the emotn app screensaver/wallpaper settings you showed in your more recent video?
Are you using the latest Firestick 4k Max Pro (OS8)? on my device (OS8) - disabling sleep with ADB command is accepted but Firestick still goes to sleep.
Yep - same behaviour here on Firestick 4k Max (2023 ver). The "two commands via ADB" trick (which is detailed all over the internet) seems to have stopped working.
Me too, did you ever find a way?
The Firestick OS8 (Latest) has under Settings --> Display & Sound --> Ambient Experience --> Advanced Mode --> an option to change when the device goes to sleep from 15 minutes to 8 hours @@ZomBeeQueeen
bro this saved me! On mine I can even change it to never, which is what I really wanted
Hi I like this thanks for this . I like to know will this work on Android TV boxes and ONN device too?
YES!!! Stay Alive WORKS!!! I’ve had a RUclips video paused for almost an hour on the Fire Cube! 🎉 THANK YOU!!!
I didn't see stay alive on my developer options
Thanks man you're a genius!
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Also note that on some devices you will get an permission error when entering
Instead type
You can check if it worked with typing
You should see the value you entered before, in this case 0
Can't download remote adb onto my phone, says API is for older phones
Everytime I try to connect to ADB shell, I get “ Connection Failed” error.
Does this onky work on 4k sticks? 😭 Mine be an old ass stick.
same problem, no info in ip address or host ? how do we fix this?
I have the same problem too. Can't get past that step.
yeah i'm getting the same problem
I think we are all having problems with this issue. A thumbs down for me.
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Thank you TechDoctorUK
Great, thanks
Just beware that the HDMI port on some screens can put the connected device to sleep when the screen shuts off. Its an hdmi command on the screen settings, so maybe check and change that.
Omg !!!! Thank you so much. I was trying all the codes and just wasn’t working! I worked on the tv instead and it worked 🤦🏻♀️
Awesome. Thanks
Very easy to sort got my Firestick split to Many tvs running via a hdmi to Av convertor to loads of tvs and kept going to sleep because it didnt think it was being watched as the hdmi control must have sent it to stby as explained the amazon new update wont allow adb direct so I DL on my Mobile as instructed and got the local ip from my settings and tested to 10milli sec and worked a treat.....think ill join your VIP
Cheers mate and thanks V clear instructions
i went through this and followed all the steps, but at the 3:48 mark when you click connect, i don't get that pop up, I get a "connection failed". Does this not work anymore?
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Thank You,Doctor!!
Thanks for the great video. This worked on my 4k max (1st gen) but not on my 4k max (2nd gen).
did you get any errors when you ran the ADB command ?
@TechDoctorUK I used the adb method and didn't get any errors. I used the adb get command to check and the 0 value stayed. I tried StayAlive. It seems to keep the screen saver from launching, which keeps it from sleeping, but then you don't get to enjoy the Ambience screen saver and you have to relaunch StayAlive everytime you reboot. If I can't find a solution I will return this firestick to Amazon. Can you help?
@@TechDoctorUK Doc, did you see my edited reply?
Also me with my FireTV 4K MAx 2023 ...no more possible disactivate sleep mode, after default is 30minutes firetv go sleep mode @@wag1629
no any errors@@TechDoctorUK
Thank you Thank you!
Will this prevent the latest update?
Does this prevent the screensaver from turning on? There is a difference between screensaver and sleep
Nice work TDUK
I have mxq pro 4k 5g (rockchip processor rk 3228a box), screen saver is not working (never turns on)in it. What will be the adb bcommands to turn on screensaver ?
I get "connection failed" error when i click connect im remote adb shell. What am i doing wrong ?
Me too
@@adamb1764same!
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Mate...For 2nd generation Firesticks, given that at each restart or shutdown the commands sent with adb (see sleep), it would perhaps be appropriate to create an app that starts when the FireTV boots and that creates the commands not to send the FireTV in sleep mode.... a little idea. You have some news ?? Thank
Do you have to connect to a computer
If you have the new fire stick 4k max second edition can you make a video on how to get rid of the grey 3rd party apps?
Thank mate but i buy new FireStick 4K MAX (2023) this system run only one time..infact when reboot Firestick all parameters comeback to default...there is FIX for new firestick 2023 ? or there is a new method for New Firestick 4K MAx (2023) ????
Old known command "settings put secure sleep_timeout 0"...trough ADB not work anymore on this 2° gen.... can you try to find a solution? THANK
DOC...some news regarding a solution for avoid stanby ???
Can confirm - the old trick in this vid doesn't work on the ver 2 (2023). The OP suggested "dumpsys deviceidle disable" sent in the same way (ADB shell command) but haven't tested as trying Stay Alive!
Stay Alive! works fine on the Firestick 4K Max ver 2 (2023). Remember though, that it doesn't autorun (i.e. if you reboot). You need to click on its icon, then it is running (there is no confirmation it has started, though)
use [Fire TV Max + Bluetooth speaker] as an Internet Radio
To prevent this Radio from falling asleep when you turn off the TV, Fire TV Max is connected to the TV not directly, but via an HDMI switch (1 input 2 outputs). the second output goes to another TV
Fire TV Max continues to work when the TV is turned off
.
Nice video, but I would like to know if there is a command to force my Firestick to turn off my TV when it goes to sleep. My nvidia shield when it goes to sleep my TV goes off completely, and also my onn box. Firesticks only turns the screeen black, but the TVs are still on.
I have a question I just did this on my fire stick 4K and I did it for one second just to try it out and it worked but how do you turn it off if you want to because I even unstalled the app and even installing the app it went into sleep mode one second even no the app was unstalled so I had to reinstall the app and did it again this time I said it for zero and now it's staying on and if I ever want to turn this feature off how do I do that thanks
You edit the command line just like he showed you in the video. Set the time to “600” seconds for 10 minutes screensaver activation.
Never had the problem of the Fire stick 4 K Max going to sleep. I thought that there should be an off button.
I have a Firestick 4kmax 2nd generation and it doesn't work on mine. I downloaded remote ADB Shell and it shows Nothing in top line so I copied what you had, "localhost" but it says Failed to connect.
I keyed it in yesterday but firestick just went to sleep. i’m assuming you don’t have to leave the remote adp shell app open always, right? when i just looked, the command line isn’t there, but i had closed the app last night
No, you dont need to keep the remote adb shell app open. Just ensure that you have entered in the command as shown and there were no errors when you pressed go.
The YT guy from CordCutters needs this one. I will message him with your info tomorrow.
thanks for sharing
@@TechDoctorUK I promote you any chance it applies sir. I really appreciate everything you do and it's all I can do beyond helping the YT algorithm.
Very informative, thank you 👍
Whenever I start the ADB shell and have the localhost for the host name and 5555 as the port ADB shell says Please make sure the target device has network ADB enabled. I also made sure debugging on my device is enabled and it is.
Does anyone have any troubleshooting tips or ideas?
Thanks for the info. You should add a short code for stay alive.
I just bought a fire cube 3 gen and a brand new flash drive 64 GB. I tried to put my flash drive via a usb hub but then the fire cube wonˋt detect my flash drive. If I put the flash drive directly in it stays connected. Will this method work so that I CAN USE A USB hub?
I think the hub is requiring too much power that your cube can't provide
@@TechDoctorUK tnx for answering me. That's a bummer
Waste of time. Doesnt work on gen2 max . Comes up error after put in localhost 5555
dang. yeah i got the same error on my max. i was hoping i just did something wrong.
Used the ADB, typed in command. My 2nd Gen still went into sleep mode. No errors when typed in. 🙃
your 2nd gen MAX ? did you disable the ambient display ?
@@TechDoctorUK I have been experimenting. If I go to the home screen it goes to sleep within minutes But when I opened RUclips and started a vid, Paused it and left it for an hour, the Firestick did not go to sleep. Sooooo, I am assuming the firestick is displaying correct behavior from the command line. YAY!!!! 🤗
@@carlyvess8404 Ok that is good feedback. Lets see if we can stop the device going to sleep, even from the homescreen. Try this command:
dumpsys deviceidle disable
let me know
@@TechDoctorUK we have success! Inputted code, left home screen on for 30 minutes, it did NOT go to sleep. You are a genius. Thank you!!! 🫶🏻🤗😆
@@carlyvess8404 but after restart/power off/on FireTV 2° gen, still no sleep or ??
Thanks for sharing bro. Much appreciated. Keep the content coming. Hope you have an incredible day. Much love and RESPECT
Greetings TDuK 👋🏿✌🏿The Launcher manager is not downloading on the 2nd gen fire stick 4k max🤫
How to keep screensaver continuesly ON (not to sleep)?
cant find adb in your page
Stay alive doesn't work for me. Really hoping the adb method works. Playing plex music library and firestick falls asleep in the middle of songs. But, I really thank you for this video.
ADB method doesn't work on the 2nd generation 4k max. I'm going to send mine back.
This is amazing thanks Techdoctor uk ❤
How do I download the stay alive app on the firestick
Use the Downloader app just like he showed in this video
It does not work for me because the moment that I open up remote ADB shell it prompts me to put in my IP address or host name I don't know where to find the IP address of this device the fire stick and I don't know what the host name is cuz I doubt it's fire stick
It won't let me edit I found the IP address but now it just says connection failed like shitting in my hands and clapping this is retarded and and probably won't work anyways thanks bud for making me do nothing
Tech doctor how do I get us Netflix with a vpn please
I try command adb settings put secure sleep_timeout 0 but my FireTV 4K MAX 2° gen after 30 minutes go in sleep....
Yes - the fix doesn't seem to work on the 2nd gen MAX. I'm trying Stay Alive! app at the mo.
Doesn't work for the new 4K Max (2nd Gen.)
I lost My firetv stick remote , now I did reset my firetv stick using by app. Now its asking physical remote needed please help me out.
I've never had any luck using keep alive unless they have fixed it? This adb is way better than what I used to do. The way I originally did this was run adb on firestick and connect my pc running a 3rd party app to change the settings. The reason I changed the setting is that when I listen to tidal, it would go to sleep and the music would stop. Love the content 👌 Thank you.
it worked fine on my 3rd gen cube. Running remote adb shell direct on the amazon devices is the quickest way to run commands.
Great video TD easy adb command thanks for sharing
✅Amazon App Killer - www.amazon.com/TechDoctorUK-TDUK-APP-Killer/dp/B0BYLK899N/
☑Amazon Cache Cleaner - www.amazon.com/TDUK-APP-Cache-Cleaner-FireOS7/dp/B0B2L67V4R
✅Playstore App Killer - play.google.com/store/apps/details?id=com.tduk.appklr
☑Playstore Cache Cleaner - play.google.com/store/apps/details?id=com.tduk.cacheclean
I have a message that say my device is not compatible with the killswitch app
Mine does NOT come up as "localhost" says put in ip address or host name....when I type in "localhost" it says Connection failed??
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Something on your site making firestick crash
Connection error after trying to connect to localhost in adb shell
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
@@enricocirne Like what?
did not wok for ***t, screens do not even look right \, it asked me for an ip address??? WTF!!!
I never had an issue til i activated the Radio addon in Kodi. My Firestick thinks the streaming music is "inactivity" and goes to sleep in 20 minutes. The "Stay Alive" app fixed this.
Thanks!
Will this also disable ambient experience?
the first option wont work keeps saying connection failed
With the newest Update the internal ADB App is not working anymore. Just download an ADB Remote App on your Smartphone, note the IP of your FireTV and connect from your Smartphone and accept USB Debbuging. Put in the commands from your Smartphone. Its as easy as that. Note: your Smartphone has to be on the same network as your FireTV
Don't have My Fire TV in settings
Doesn’t work!!!!
Tutorial is no longer there, don’t waste your time.
still there for me you just have to scroll a bit
didnt work at all.. your website is so banner laden its hard to navigate, and if you dont pay attention theres "download" buttons all over the page..
what a load.. dont waste your time.. thumbs down.
👍
What a load of rubbish! As usual, nothing there.
For me this command didnt work i have a firecube the command that worked for me was .
Thanks man, searched for that!!
Good video TDUK.
Thanks 👍