Some helpful links for Nano II Tilta Nucleus Users Group: facebook.com/groups/tilta.nucleus.users/ Nano II Support Page: tilta.com/product_support/nucleus-nano-ii/ Contact Tilta: tilta.com/contact/ Tilta Tech Channel Playlist: ruclips.net/p/PLoberV9bF5Sffd6_6id4YMEQKDolne1FQ&si=J_1-od2h2MtsE9dy
PLEASE UPDATE THE NANO II WHEEL - IT IS AWESOME BUT COMMUNICATION TO RED KOMODO IS GARBAGE AND BUGGY. WE TESTED DIFFERENT WHEELS ON DIFFERENT RED KOMODOS. THE RECORD BUTTON WORKS IN 1 OUT OF 10 SCENARIOS. < 3
@@TILTA Great news, thanks! A bit unsure why a regular USB-C with a firmware upgrade wouldn't cut it, but any way super glad to hear I can still use my handle. Thanks again for the update
@@TILTA I noticed in the Dec 23 firmware update that the Nano 2 motor now supports Nucleus M side handles. Is this also the case for advanced side handles? Thanks for the update 🙏
Seems like FX3 support is only through USB right now? Hope there's a bluetooth option in a future update. When using external batteries, I prefer to use USB over a dummy battery to reduce the chance of the camera losing power.
As of now the only communication is through usb-c. This is something we are currently trying to push (the wireless functionality) but there may be some limitations when it comes to Sony's protocol. More info about this coming soon.
Yes we have USBC run stop cables for Red Komodo to trigger R/S with the handwheel: tilta.com/shop/usb-c-run-stop-cables/ At the moment the control handle is only compatible with DJI run/stop cables.
We are working on showing battery status through the blue LED indicator above the screen. This feature has not been optimized yet but we will be looking to do so in the next firmware update. It should take about 2-4 hours for a full charge depending on the source so I would go by that until we implement a better solution.
I liked that on the original nano wheel you could set A/B with the hardware buttons - but on the Nano 2 you can only set marks with the FUNC button - you have to look at the screen and hold the A/B button onscreen. Is there any way to make the FUNC button operate as A/B marker? If not please can we have this in a future update as an option?
You are correct unfortunately, the only way to set marks is with the function button and the only way to set A and B points is through the screen. This may be made possible in a future firmware update but for now this is way to set marks.
Nick - Can you do a video that shows how to add (if possible) focus points on a custom user lens preset? I have saved a user lens in the control unit hand wheel, with multiple foot markings, but I want to add more markings for close focus. Can you advise if this is possible without having to re-write the entire custom lens preset? Thanks!
On setting marks, how do you change the speed of the wheel if you’re trying to do a FAST focus throw. I noticed when I set the A/B marks and start turning the wheel it’s very slow and you need to turn the wheel a lot to actually finish the focus range..I’m talking about a fast 1 second dramatic focus throw
I'd like to know too! Frankly that sounds too sophisticated for this, especially at a time when much of the core pre-release functionality is still buggy. What voltage are you putting into it? That might be one reason why it's slow. My experience is that regardless of the speed of your hand movement, beyond certain speeds the motor starts to lag.
Yes - go into Settings - Rocker Speed - then 'Range' to adjust how quickly the focus throw will go between A and B - but the wheel must be in DF mode for this to work.
@@Scifictus awesome thank you! Does your unit ever have a problem when calibrating and when it’s supposed to go into the opposite direction after finishing one direction, it keeps on going and scraping the gears? Mine seems to do this a lot
Go into Settings, then Rocker Speed, then Range to adjust the speed of the focus throw that will go between A and B, however the wheel must be set in DF mode for this to be possible.
Why do you need to run the auto calibrate first for lenses without hard stops, just to do a manual calibration after? I have a lens without hard stops, but I am using the included photo lens gear ring, and if I try to auto calibrate it hits the connector piece of the non continuous gear ring and starts skipping like crazy. Can I just run manual calibration?
ok, i can only control the motor in Auto mode, while i can only control the tilta mirage in the Manual mode? i calibrate the motor, and auto find the channel, then make tilta mirage motor to the same channel, but i can only choose either one of them by choosing A/M mode.... is there a way to fix this
I got one already and I cannot upgrade the software on the wheel..tried already more than 30 times..maybe you should have an info video about that only.
@@leonpowell1044 yes it is. Annoyingly, every time the update get stuck a restart needs to be done on the wheel..than, all the network details needs to be retyped again. I already gave up on updating it..tried about 50 times.. I Wrote Tilta but never got an answer. If you thinking getting one then wait.
You upgrade the Nano II firmware through Wi-Fi. Preferably through a mobile hotspot. Here's the link to the Nano II firmware update tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Hey Nick. Can I safely power/recharge the Nano control wheel via power from a V-mount battery to the USB-C port on the Nano 2 control wheel? I know the motors can accept higher voltage, but I haven't found input power specs for the control wheel.
When i will be using it with blackmagic 6k pro a connect it via bluetooth, what happens when im turn off the camera? It will automatically reconnect or i need to do it manually? Thanks for the answer!
There is a significant design flaw with the Tilta Nucleus Nano II system. The motor cannot deliver (PD) to the camera. This means that if you want to use the record button on the Sony FX3/30, you will not be able to power your camera through a USB connection from the motor to the camera. Here’s a detailed explanation: USB-C Output 1: This port is designated for power output to a second motor only. USB-C Output 2: This port is for data transfer. According to the setup guide, when using the Sony FX3/30, you need to enable PC remote and PD through USB to connect the motor to the camera and use the record button. While this setup allows the record button to function, it does not provide power delivery to the camera. Potential buyers should be aware that this limitation might require alternative power solutions for the camera while using the motor.
You are correct unfortunately since there is only one USB-C port on the camera you will need to choose between using it for power or for run stop! We recommend using a dummy battery solution to power your camera so you can keep the USB-C port open for run stop!
with FX3 Trying to connect via USB-C. Only OUT 2 works. When I change to OUT 1 PC Control is unavailable. WB doesn't work. ISO, SHUTTER & APUTURE work. Would be great to have PD to camera from battery through the motor. Otherwise it's not that useful with FX3. Also trying to connect with Nucleus M left handle - not supported yet. It seems like I bought too early.
I like the fact that you went into such detail in the video, lots of work to create the video I'm sure. I needed to review the video several times to try and setup the unit I purchased and have a few thoughts. For future videos please consider not using such an annoying sound effect in between EVERY chapter. Also, regarding the voice over, please complete the sentence with full voice projection, the drop off at the end of each sentence sounds mumbled and garbled. Nit-picky yes....But got very annoying when trying to pay close attention. I feel for the editor of this piece. I ended up returning my Nano II. The product had issues, most of been a lemon. Spent a few hours trying to get it work but no luck.
Just got this and love it so far! Only thing not working so far is the Bluetooth. I’m trying to connect to a BMCP 6K and it sees the camera, but won’t actually connect when I press the frequency. Any suggestions?
Make sure the firmware is update to date on the Nano II handwheel and camera. If it is still not working you can contact our support team at support@tilta.com!
Any change to support BB Full frame 6k? I got 2 motors and wanted to use one for irix, can I use the zoom lever on the wheel? also I want to add my irix 30 mm lens can you do a video for user lens? thx
The Blackmagic 6K Full frame will likely be added with an upcoming firmware update. Keep an eye out on our Camera Control Compatibility Chart on our website for the latest updates. The zoom rocker can be set to control, iris, zoom, etc. A video for lens mapping mapping will be coming soon. If you have any questions, contact our support team at support@tilta.com in the meantime.
@@dans2833 nope , I CAREFULLY slide it so the nato rail does not touch the pins, otherwise this is bad design , the pins should have a protective cover…
Mine keeps twisting off if I just put it on and lock it , I make sure that it is IN the nato rail but still . To be honest i dont care about the fkn pins at this point , I dont use it on the ronin and if I ever would I can just plug in the V mount to charge it up .@@dans2833
Brilliant design, I love the TNN II...but.....where is the section for setting up custom lenses? Not sure how you could overlook one of the most critical aspects of the set up process. Possibly because it's so incredibly flakey and finicky. Somebody should do a video just on this topic alone.
Is there a video going into further about connect camera control for fx3? I followed everything to a tea, but it's still not connecting to my fx3. I updated all the firmwares camera and the nano
I have the motor with the handle, it works fine. You just have to make sure to attach the handle from the top as the side nato rails are not for mounting it to anywhere
Hi there, Can you please make an explainer video for how to add your own lenses to the memory. I have tried to input distances for my Zeiss CP.3 lenses and all I get is a bunch of nonsense numbers on the display. PLEASE make some clear instructions or let us know you're working on the firmware for it, because as it stands this feature doesn't work.
You are able to pair our Nucleus M handgrips with the nano II motor with our new firmware update. Here is the tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Having issues pairing my Nucleus Nano II motor with EITHER handle on my Advanced Ring Grip. I simply want to use it to control the Zoom on my 24-70. Cannot figure anything out. Very frustrating. Any tips or documentation you could point me to @tilta?
Nick. I have tried to contact Tilta in Burbank with some questions to no avail. How can I get in touch with someone? I have a fair amount of questions regarding the II, and the just released firmware (Dec 2023). Like, what happened to the mulitplier? But also some other general questions - can you calibrate the knob for a lens without stops? What exact adjustments are supported for the FX3? Do I have to recalibrate a lens every time I use it, or does the Nano store info that can be recalled? Why does the screen freeze up some times? I've got a few more. Can I get any support? Thank you! I think I'm going to love this, but there is a learning curve for sure. Also, I can't seem to really enter info at all on the lens page. What's the voltage out of the second USBC motor port? It needs to be 9 volts for the FX3. Your motors will work between 3V and 17V, so a 5 volt USB A will suffice, but I don't think that's enough to jump to the FX3 and provide power from the second port. Just lots of questions.
I just unpacked my new Nano II and I can't get camera control to work on any of my cameras (BMPCC 4K, 6K Pro, and 6K G2). I'm using Blackmagic's latest firmware, 8.6 Public Beta on all 3, and I've updated the Nano II firmware. Is this incompatible? I also tried using it via the Bluetooth+ App, same thing.
Did u guys forget to put in a charging status indicator? When it is plugged in i cant find anyway to see the charge status. The only way to check is to unplug the item and check the battery icon to guess if its full or not, its so small its hard to tell. Can u guys add a firmware that puts a charging status on the screen when its off and plugged in
@@TILTA I think I didn't know how to explain, sorry, I'm from Mexico and I don't speak English well. I was referring to how I can see the focus distance in meters, as it appears in the saved lens profiles.
can I use the nano ii wheel on camera for local control and the nuclear M wheel with my focus puller, easily switching back and forth to control focus?
no it's not, it is a combination of analog to digital gain. The FIZ has several settings to adjust the speed of the rocker, starting with the actual zoom rocker speed and ending with motor stiffness and sensitivity.
You say you will go over the handle firmware update at a later point, but I don't see that anywhere... I updated my wheel and when trying to do the handle it sits at 100% but then the handle doesn't boot. It only boots when in upgrade mode and shows the original firmware
You upgrade the Nano II firmware through Wi-Fi. Preferably through a mobile hotspot. Here's the link to the Nano II firmware update tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Hi, I'm interested in this product for one shot in particular, where I would need a very slow, controlled and fluid zoom-out. Is it possible with this device to change the speed of the zoom rocker ?
Hi there. It says you can use the new dji motor to focus from the nano wheel. But I can not see how to connect it. I bought the new focus pro motor - nowhere I can find how to connect it. The wheel has a dji flip even .. but not a description how to pair
Can the REC button be used to initial recording on the Panasonic S1H via that camera's remote port? I have the Tilta cable labeled "For Handle/Motor" on one end (USB-C), and "GH/S series R/S" on the other (3.5mm TRS). BTW, I am able to trigger recording on my GH5 and S1H with the old Tilta powered control handle, via a micro USB cable from the original Nano 1 motor to the cameras' remote port. So, that means the remote port on these cameras is working. I just can't get it to work with the Nano 2 control handle. I have the same problem with the Advance Focus Grip.
as of now for the current firmware update there is no documentation but for future updates we will be listing out what improvements the firmware updates make.
The focus ring on my lens has a long travel distance (270 degree), and when I turn the wheel to max or minimum, it doesn't make the lens to infinity or minimum focus. What should I do?
Make sure you are double pressing the pairing button and it is blinking red. Try disconnecting and reconnecting the receiver and make sure none of the pins are damaged.
02:54 The one detail that threw me for a loop is when Nick said not to slide this onto a regular NATO rail. If I can't mount this on a regular NATO rail, I may be sending version II back in favor of version I. How would you mount this to a camera cage as shown in product photos or to a handle on a rail system? Is there even a single 1/4-20 on it? Did I miss something? He did emphasize "slide" so maybe he means to take care when mounting it.
The interface for entering your own lenses is crude, doesn't appear to be explained anywhere but it kinda works (it's in System/Lens). Wish it would let you go back and edit the patches somehow. The software barely makes use of the hardware. Why can't you pre-program a zoom zoom or focus pull to time with a slider? Doesn't feel like it's delivering great value as it stands in 01.24. And the outlay for good usb c pd power supply isn't negligible either.
Lens Mapping is not fully functional and will be updated in a future firmware update! More information on how to use it will be available at that point.
I don't know why but when my nano ii doesn't show up the battery on screen, everything stays at 0 whatever I do and the motor doesn't move. Sometime, when the battery shows up that works and the next day that doesn't work for no reason. I've downloaded all the updates but when I reboot the hand wheel it said I have to download it again. I don't know what is going on. if someone can help me.
Yes, next firmware will keep the wifi password to stay, the reason we set it forget cause some cameras will need to be connected by wifi. Bluetooth distance is 5-10 meters.
When I map in my user lens it does not show the focal length of the chosen lens is there an option to show the iris stops and zoom distance on the main page or can you add a fourth page to display all three? The torque doesn’t seem to change when set to the lowest option the gears often jump of the lens which effects the user’s mapped point and I have to hold the motor in place. I also find after auto calibration you have rotate the focus wheel from infinity to minimum focal twice before unit shows correct focus points.
1. Lens Mapping is not fully functional and will be updated in a future firmware update! More information on how to use it will be available at that point. 2. The torque setting is only for controlling the motor not calibration, the newest firmware has a lower torque auto cal. 3. This does not sound common, please send support@tilta.com a video of your demonstrating this issue and we will get you squared away.
Is there a semless way to switch between the handle and the fosu wheel ? I would like to have the gripp attached to the camera and the wheel atached to the soulder rig. and to switch between those two on the fly when mounting the camera to a shoulder rig.
Yes you could set them all to the same channel then have the focus wheel control motor no. 1 and the handle control motor no. 2. You can then single tap the button the motor to change which motor number its assigned to which would change control between the wheel and handle.
@@TILTA I dont know if i undestood correclty, in your explanation you talk about controling motor nr1 with the grip and motor nr 2 with the wheel. But is there a way to control the same motors with the grip and with the wheel at the same time ? I have two motors attached to the camera. motor one and two. The grip is attached direclty to the camera and controls both motors. I have a shoulder rig with the wheel attached to it. So what i do is i just pivot the grip out off the way and mount the camera onto the shoulder rig via quick realese plate. And at this point i would like to control the same motors with the wheel. It seems there is no quick way to do that, without pairing the motors between the handle and the wheel every time.
See download manual it tells you Contact wheel to handle keep handle off Connect to Wi-Fi Turn on handle while holding M button Go to firmware update on wheel scroll down to handle and update unit
The set up of this needs to be simpler. Unfortunately I'll have to return mine, mine is calibrating but it just keeps spinning non stop, i able to connect however my focus wheel does not correspond with my motor at all.
The motor is designed to spin until it reach the end point of the lens. You can learn how to calibrate manual lenses and connect the handwheel by watching this video!
Yes we have USBC run stop cables for Red Komodo to trigger R/S with the handwheel: tilta.com/shop/usb-c-run-stop-cables/ At the moment the control handle is only compatible with DJI run/stop cables.
Do will open the api communication protocol, will be nice to develop a compatible UEngine addon without the need of reverse engineering your protocol like we did with previous version.🤔
Trying to connect my Tiltaing Right Side Advanced Focus HandleType VI to the nano ii doesent work. Do I Need a specific cable or is not meant to work together ?
I have the same problem. I was told by Tilta a month or so ago that a future Nano II motor firmware upgrade would fix this 'over the next month or two'. So I hope it comes soon..
Right now it also doesn't work with Nucleus M handgrips. Once the NANO2 FIZ boots up - it switches all motors to be controlled from the NANO2 FIZ and it's impossible to unlink a motor from the NANO2 FIZ like it was possible on the M FIZ. Lots of stuff to be fixed still
@@TILTA how about ability to control zoom from Nucleus M handgrips while controlling focus from Nano II? Basically an ability to remove link to sertain motor numbers in the nano II system like it is already done in the Nucleus M system and old Nano (I can use my NANO 1 simultaneously with Nucleus M grips controlling focus on my M motors)
The Blackmagic 6K Full frame will likely be added with an upcoming firmware update. Keep an eye out on our Camera Control Compatibility Chart on our website for the latest updates.
Have you got a part number for the right angle rosette adapter for the control handle? It looks slightly different to the Nucleus M. If it is, I hope it’s a little cheaper than the Nucleus M adapters!
@@TILTA I have bought one already and find that it wiggles loose. The locating pins aren’t snug so the handle can wriggle side to side, eventually loosening the handscrew… Have you seen this before?
@TILTA Please, fix the ability to unlink a motor from the NANO 2 FIZ, like it is already done on the M FIZ. Right now when the NANO2 FIZ can not operate simultaneously with M handgrips, thus one can't control zoom on M handgrips and focus through NANO2 FIZ. Once the NANO2 FIZ boots up the M handgrips will stop working. Please, make it possible to unlink a motor in the motor menu, right now you can tap on the link, it will show you're tapping on it, but nothing happens.
This might be possible with a future firmware update, right now the only option to send control over to the hand grips is to power off the hand wheel or change the motor number on the motor!
@@TILTA actually, I've found a way around - powering the zoom motor by a different cable (not daisy-chained) and setting it to a different channel/motor number works. Switching a motor number when the motors are daisy-chained will not work, which is silly, considering nano1 didn't have that issue and had a better integration with the Nucleus M in this way (small nano1 on camera, with M handgrips used to control zoom).
I have a question, Focus Wheel can also be used on Sony lenses that have PZ? I would like to control the PZ function, without having to connect it to the Ronin, is it possible to work?
i get motor error often to frequently, and i wish you would of included a usb wall wart, just so you could get immediately working, cause it don't like alot of power stuff. just got it, i have it setup for zoom, ive read all that there is, watching videos, updated firmware. ill call/email if problems continue.
Click mirage button for 4 times and you could select the motor number for mirage and then you could change the color for nano II motor to make it motor 3.
@@TILTA i'll try it out and get back to you guys. My mirage motor, when nano ii is in manual mode, works fine but since in manual only 1 Chan can BE active at any given time, even when i have the nano ii engine lets say, in Blue color, it does nothing on the front rocket/switch
To all the Canon Users: Is anybody able to connect the hand wheel or the hand grip to the Canon R5C in video mode? Which USB setting in camera are you using? Which setting the the hand wheel. Nothing seems to work.
@@TILTA there are lenses that can go past infinity (like most cine zoom lenses and some fix lenses), the lens hard stop is beyond the place where the infinity mark is. The question is - what should be written in lens value to manually set infinity for such lenses. Like I have tried just typing in "INF" and it sets it as a random focus distance very far away. Is this the correct method to assign the infinity spot of the lens or what's the trick here?
There is an infinity symbol third input page but it doesn’t show when you choose the user lens it will just give you a numerical value but you you do get a symbol on the display ring
SONY CAMERAS CONTROL: Unfortunately control (other than record button) with sony cameras is still very average. Also, the loud vibration sound for each setting change is very unpleasant :( Can you give us the option of switching it off or reducing it by 95%? In addition. Each time I change the shutter or ISO there is a noticeable delay.
I ordered the handle and a 2nd motor, together with the base kit. Base kit arrived last week, and handle and 2nd servo shipped yesterday. Should arrive in my hands here in Australia early next week, but anyway, tracking info is updating. Hopefully that helps you a bit.
There has been a slight delay but it is looking like early November. Please keep your eyes peeled on our socials and website for more info regarding the official launch date.
anyone know how to control a7s3 with the wheel through bluetooth or wifi? I cannot get it to work. Pairing works fine but ctonrols and info never go thru
@@RobertoMettifogo you plug in the motor with the usb C port on the upper side to the camera's usb C and the lower usb C port goes to the powerbank / battery . You need to enable PC remote control on the camera settings to do this , if it is grey and you cant you have to turn off Smartphone remote control to turn on the PC remote control, from that it will work fine. the point is the unit does not have to be connected to the camera just the motor so it is still remote , you can still use it in your hand or give it to another person .
@@poti732 I have just the hand controller, not the motor since I plan to use it with my AF lenses, but I can't connect it to the camera, nor with wifi or cable, did all you said and tried other ways but nothing..
So if i get you right you ONLY want to use the handcontroller to set camera settings and not to control the motor right ? If so ill tell you in steps again what you need to do : step 1 you NEED some sort of tilta nucleus motor even if you dont use it to be able to connect the handwheel to your camera. step 2 You will find 2 USB C ports on your tilta nucleus motor , the top USB C port OF THE MOTOR itself ( not the handwheel ) needs to be connected to the camera's USB C port . Step 3 Connect the motor to some sort of powersource with the bottom USB C port on the motor . Step 4 Enable PC remote control on the camera if you cant than disable smartphone control and you will be able to . Step 5 Enjoy it is connected . So the basic idea is that the motor has to connect to the camera not the handwheel and you NEED a motor do do this even if you dont use it because Tilta wants to keep the handwheel wireless to be able to operate from. a distance so it actually sends the signal to the motor and than the motor with the usb C sends it to the camera. @@RobertoMettifogo
I just received the Nano II system with remote control grip. The included manual is in Chinese. I don't see an English version manual on Tilta's web site. Does an English manual exist?
PLEASE UPDATE THE NANO II WHEEL - IT IS AWESOME BUT COMMUNICATION TO RED KOMODO IS GARBAGE AND BUGGY. WE TESTED DIFFERENT WHEELS ON DIFFERENT RED KOMODOS. THE RECORD BUTTON WORKS IN 1 OUT OF 10 SCENARIOS. < 3
Год назад
Hi folks, does the Nucleus Nano II works with the Blackmagic Camera app for iPhone 15 Pro/Pro Max? I am aware the Nucleus M and the previous Nano works. Just trying to make sure if the Nano II also works.
I was just checking the latest version of the BM app on a whim and found that it works on last week’s update along with the latest Nano FW!Thanks Tilta!!! Awesome Christmas gift!
Some helpful links for Nano II
Tilta Nucleus Users Group: facebook.com/groups/tilta.nucleus.users/
Nano II Support Page: tilta.com/product_support/nucleus-nano-ii/
Contact Tilta: tilta.com/contact/
Tilta Tech Channel Playlist: ruclips.net/p/PLoberV9bF5Sffd6_6id4YMEQKDolne1FQ&si=J_1-od2h2MtsE9dy
PLEASE UPDATE THE NANO II WHEEL - IT IS AWESOME BUT COMMUNICATION TO RED KOMODO IS GARBAGE AND BUGGY. WE TESTED DIFFERENT WHEELS ON DIFFERENT RED KOMODOS. THE RECORD BUTTON WORKS IN 1 OUT OF 10 SCENARIOS. < 3
When will the Nano II motor be compatible with older Tilta Side Focus Handles?
We will be releasing a cable for Nano II to use with advanced side focus handle soon.
@@TILTA Great news, thanks! A bit unsure why a regular USB-C with a firmware upgrade wouldn't cut it, but any way super glad to hear I can still use my handle. Thanks again for the update
@@TILTA I noticed in the Dec 23 firmware update that the Nano 2 motor now supports Nucleus M side handles. Is this also the case for advanced side handles? Thanks for the update 🙏
Looking forward! :D@@TILTA
@@TILTA I have the advanced side focus handle. What cable is needed to pair them together?
What happened to the handle? Will it still be released or is it discontinued? And if it will be released, what's the cost?
Definitely want to know the answer to this
@@taylormacbrown It is available, don't think there's any reviews yet.
The Nucleus Nano II Control Handle is avaliable here: tilta.com/shop/nucleus-nano-ii-control-handle/
Seems like FX3 support is only through USB right now? Hope there's a bluetooth option in a future update. When using external batteries, I prefer to use USB over a dummy battery to reduce the chance of the camera losing power.
As of now the only communication is through usb-c. This is something we are currently trying to push (the wireless functionality) but there may be some limitations when it comes to Sony's protocol. More info about this coming soon.
Lets address the elephant in the room. Is it possible to trigger run stop on Red Komodo 6K from the Nucleus Nano II wheel or handle?
Yes we have USBC run stop cables for Red Komodo to trigger R/S with the handwheel: tilta.com/shop/usb-c-run-stop-cables/
At the moment the control handle is only compatible with DJI run/stop cables.
I’m buying this just bc of the tutorial video. So good!
This product is so well designed, those who used FF the old way find this way ahead of its time.
what accessory is attached to the hand wheel controller on the cage?
I want to know it to ❤
The nano II handwheel controller has a nato clamp on it's backside. It slides directly onto the nato rail on the side of the Tilta Red Komodo cage.
I don't see any charging indicator when I attempt to recharge the internal battery of the Nano II control wheel. How do I know if it is charging?
We are working on showing battery status through the blue LED indicator above the screen. This feature has not been optimized yet but we will be looking to do so in the next firmware update. It should take about 2-4 hours for a full charge depending on the source so I would go by that until we implement a better solution.
Was wondering about that too lol!
@@TILTA any updates on this battery charging indicator as well?
@@animusvisual shoot us an email over at support@tilta.com!
when will be release date for the handle ?
The Nucleus Nano II Control Handle is available here: tilta.com/shop/nucleus-nano-ii-control-handle/
I liked that on the original nano wheel you could set A/B with the hardware buttons - but on the Nano 2 you can only set marks with the FUNC button - you have to look at the screen and hold the A/B button onscreen. Is there any way to make the FUNC button operate as A/B marker? If not please can we have this in a future update as an option?
this is a good one
You are correct unfortunately, the only way to set marks is with the function button and the only way to set A and B points is through the screen. This may be made possible in a future firmware update but for now this is way to set marks.
Nick - Can you do a video that shows how to add (if possible) focus points on a custom user lens preset? I have saved a user lens in the control unit hand wheel, with multiple foot markings, but I want to add more markings for close focus. Can you advise if this is possible without having to re-write the entire custom lens preset? Thanks!
On setting marks, how do you change the speed of the wheel if you’re trying to do a FAST focus throw. I noticed when I set the A/B marks and start turning the wheel it’s very slow and you need to turn the wheel a lot to actually finish the focus range..I’m talking about a fast 1 second dramatic focus throw
I'd like to know too! Frankly that sounds too sophisticated for this, especially at a time when much of the core pre-release functionality is still buggy. What voltage are you putting into it? That might be one reason why it's slow. My experience is that regardless of the speed of your hand movement, beyond certain speeds the motor starts to lag.
Yes - go into Settings - Rocker Speed - then 'Range' to adjust how quickly the focus throw will go between A and B - but the wheel must be in DF mode for this to work.
@@Scifictus awesome thank you! Does your unit ever have a problem when calibrating and when it’s supposed to go into the opposite direction after finishing one direction, it keeps on going and scraping the gears? Mine seems to do this a lot
Go into Settings, then Rocker Speed, then Range to adjust the speed of the focus throw that will go between A and B, however the wheel must be set in DF mode for this to be possible.
I want to see a better view of how the control handle is attached
Same here.
the nano II handwheel has a nato clamp on the backside. it slides directly onto the nato rail on the side of the Tilta Red Komodo cage
Why do you need to run the auto calibrate first for lenses without hard stops, just to do a manual calibration after? I have a lens without hard stops, but I am using the included photo lens gear ring, and if I try to auto calibrate it hits the connector piece of the non continuous gear ring and starts skipping like crazy. Can I just run manual calibration?
Is there an accessory for mounting the hand wheel controller to a 15mm rod?
i want the same ;)
Tilta 15mm Rod Holder To NATO Adapter and a short nato rail
Thank you!! @@leonpowell1044
Tilta 15mm Rod Holder to NATO Rail Attachment // SKU: TA-15RH-NATO-B
ok, i can only control the motor in Auto mode, while i can only control the tilta mirage in the Manual mode?
i calibrate the motor, and auto find the channel, then make tilta mirage motor to the same channel, but i can only choose either one of them by choosing A/M mode....
is there a way to fix this
I got one already and I cannot upgrade the software on the wheel..tried already more than 30 times..maybe you should have an info video about that only.
Same here
Is the wheel connected to the internet via Wi-Fi?
@@leonpowell1044 yes it is.
Annoyingly, every time the update get stuck a restart needs to be done on the wheel..than, all the network details needs to be retyped again.
I already gave up on updating it..tried about 50 times..
I Wrote Tilta but never got an answer.
If you thinking getting one then wait.
@@streetlife20 do you have any development of any kind from your Nano upgrade process? I still cannot get my’n updated.
You upgrade the Nano II firmware through Wi-Fi. Preferably through a mobile hotspot. Here's the link to the Nano II firmware update tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Hey Nick. Can I safely power/recharge the Nano control wheel via power from a V-mount battery to the USB-C port on the Nano 2 control wheel? I know the motors can accept higher voltage, but I haven't found input power specs for the control wheel.
If the battery has a PD USB-C port then it is safe, but you need PD USBC to charge the nano II.
When i will be using it with blackmagic 6k pro a connect it via bluetooth, what happens when im turn off the camera? It will automatically reconnect or i need to do it manually? Thanks for the answer!
There is a significant design flaw with the Tilta Nucleus Nano II system. The motor cannot deliver (PD) to the camera. This means that if you want to use the record button on the Sony FX3/30, you will not be able to power your camera through a USB connection from the motor to the camera.
Here’s a detailed explanation:
USB-C Output 1: This port is designated for power output to a second motor only.
USB-C Output 2: This port is for data transfer.
According to the setup guide, when using the Sony FX3/30, you need to enable PC remote and PD through USB to connect the motor to the camera and use the record button. While this setup allows the record button to function, it does not provide power delivery to the camera.
Potential buyers should be aware that this limitation might require alternative power solutions for the camera while using the motor.
You are correct unfortunately since there is only one USB-C port on the camera you will need to choose between using it for power or for run stop!
We recommend using a dummy battery solution to power your camera so you can keep the USB-C port open for run stop!
with FX3
Trying to connect via USB-C. Only OUT 2 works. When I change to OUT 1 PC Control is unavailable.
WB doesn't work. ISO, SHUTTER & APUTURE work.
Would be great to have PD to camera from battery through the motor. Otherwise it's not that useful with FX3.
Also trying to connect with Nucleus M left handle - not supported yet.
It seems like I bought too early.
too late to return
For camera control you need to use output 2. Right now the only supported camera features are Run/stop, ISO, Shutter Speed, and Aperture.
thx for this video
is possible to do a digital zoom in and zoom out for the BMPCC6K PRO? I want to do this for prime lenses.
no just manual zooms for now!
Support for lumix camera control?
this is something we are working towards.
I like the fact that you went into such detail in the video, lots of work to create the video I'm sure. I needed to review the video several times to try and setup the unit I purchased and have a few thoughts. For future videos please consider not using such an annoying sound effect in between EVERY chapter. Also, regarding the voice over, please complete the sentence with full voice projection, the drop off at the end of each sentence sounds mumbled and garbled. Nit-picky yes....But got very annoying when trying to pay close attention. I feel for the editor of this piece. I ended up returning my Nano II. The product had issues, most of been a lemon. Spent a few hours trying to get it work but no luck.
Just got this and love it so far! Only thing not working so far is the Bluetooth. I’m trying to connect to a BMCP 6K and it sees the camera, but won’t actually connect when I press the frequency. Any suggestions?
Make sure the firmware is update to date on the Nano II handwheel and camera. If it is still not working you can contact our support team at support@tilta.com!
Any change to support BB Full frame 6k? I got 2 motors and wanted to use one for irix, can I use the zoom lever on the wheel? also I want to add my irix 30 mm lens can you do a video for user lens? thx
The Blackmagic 6K Full frame will likely be added with an upcoming firmware update. Keep an eye out on our Camera Control Compatibility Chart on our website for the latest updates.
The zoom rocker can be set to control, iris, zoom, etc.
A video for lens mapping mapping will be coming soon. If you have any questions, contact our support team at support@tilta.com in the meantime.
@@TILTA Really cool, thx for the info! What about a Lidar solution too? 😎
When will there be an update for Nikon Z8???
We do not have a eta yet but we are trying our best to push it now.
How do i Mount it to a nato rail if I dont slide it ? That is the point of the nato rail.
Don't do it anyway. The pins really break. I know it for sure :-) Use the attachment method you see in the video.
@@ouvertcinerental5617where ? There is no explaining in the video on how to attach.
@@dans2833 nope , I CAREFULLY slide it so the nato rail does not touch the pins, otherwise this is bad design , the pins should have a protective cover…
Mine keeps twisting off if I just put it on and lock it , I make sure that it is IN the nato rail but still . To be honest i dont care about the fkn pins at this point , I dont use it on the ronin and if I ever would I can just plug in the V mount to charge it up .@@dans2833
@@poti732 Mine came in without pogo pins, it's a flat pogo design now
Brilliant design, I love the TNN II...but.....where is the section for setting up custom lenses? Not sure how you could overlook one of the most critical aspects of the set up process. Possibly because it's so incredibly flakey and finicky. Somebody should do a video just on this topic alone.
Is there a video going into further about connect camera control for fx3? I followed everything to a tea, but it's still not connecting to my fx3. I updated all the firmwares camera and the nano
All of the information about the current camera control functions for FX3 are in this video!
Hi. Nice Overview. Is it possible to run the motor with the side handle standalone or do I lack functionality when running without the main wheel?
I have the motor with the handle, it works fine. You just have to make sure to attach the handle from the top as the side nato rails are not for mounting it to anywhere
Yes the only thing you can do with the side handle and the motor is to control motor. The more advanced settings are controlled with the handwheel.
Hi there, Can you please make an explainer video for how to add your own lenses to the memory. I have tried to input distances for my Zeiss CP.3 lenses and all I get is a bunch of nonsense numbers on the display. PLEASE make some clear instructions or let us know you're working on the firmware for it, because as it stands this feature doesn't work.
please shoot our support department an email at support@tilta.com. Thank you!
@tilta: Do you plan to add support for Nikon cameras to the Nano-II? It would be quite handy if that’s the case, appreciate your feedback.
We do not have a definitive date yet but we are trying our best to push it now.
Thank you for feedback. If you need a beta-tester, I have both Z6II and z9 available for testing. @@TILTA
At 22:05 you talk about colors and motor numbers. What is the correspondence? How do you know which color 'motor 1' corresponds to?
This information can be found in the Nano II manual. Purple: FOCUS / Green: IRIS / Blue: ZOOM / Yellow: OTHERS
Im not seeeing the multiplier setting on my handwheel. Thoughts?
shoot us an email over at support@tilta.com!
Nucleus M handle still doesn’t work with N2 motor. When will there be an update?
You are able to pair our Nucleus M handgrips with the nano II motor with our new firmware update. Here is the tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Having issues pairing my Nucleus Nano II motor with EITHER handle on my Advanced Ring Grip. I simply want to use it to control the Zoom on my 24-70. Cannot figure anything out. Very frustrating. Any tips or documentation you could point me to @tilta?
Please shoot our tech support an email and we will help you out! support@tilta.com
Nick. I have tried to contact Tilta in Burbank with some questions to no avail. How can I get in touch with someone? I have a fair amount of questions regarding the II, and the just released firmware (Dec 2023). Like, what happened to the mulitplier? But also some other general questions - can you calibrate the knob for a lens without stops? What exact adjustments are supported for the FX3? Do I have to recalibrate a lens every time I use it, or does the Nano store info that can be recalled? Why does the screen freeze up some times? I've got a few more. Can I get any support? Thank you! I think I'm going to love this, but there is a learning curve for sure. Also, I can't seem to really enter info at all on the lens page.
What's the voltage out of the second USBC motor port? It needs to be 9 volts for the FX3. Your motors will work between 3V and 17V, so a 5 volt USB A will suffice, but I don't think that's enough to jump to the FX3 and provide power from the second port. Just lots of questions.
please email support@tilta.com and someone from our support team should reach back out to you
I just unpacked my new Nano II and I can't get camera control to work on any of my cameras (BMPCC 4K, 6K Pro, and 6K G2). I'm using Blackmagic's latest firmware, 8.6 Public Beta on all 3, and I've updated the Nano II firmware. Is this incompatible? I also tried using it via the Bluetooth+ App, same thing.
no it is compatible. shoot our support team an email of your pairing process and one of our support agents will help you from there!
Did u guys forget to put in a charging status indicator? When it is plugged in i cant find anyway to see the charge status. The only way to check is to unplug the item and check the battery icon to guess if its full or not, its so small its hard to tell. Can u guys add a firmware that puts a charging status on the screen when its off and plugged in
You are correct the battery indicator will only show if you unplug the unit. When plugged in there will be a charging symbol on the screen.
How can I configure to see the focus distance of any manual lens? I only see that it is possible with the lenses that are saved on the list.
Hit auto calibrate, then manually calibrate, it is covered in this video!
@@TILTA I think I didn't know how to explain, sorry, I'm from Mexico and I don't speak English well.
I was referring to how I can see the focus distance in meters, as it appears in the saved lens profiles.
What if the motor doesn’t stop after 15 seconds, when hitting auto calibration?
Mine did the same. I had to pull the power source.
this issue should be addressed in a future firmware update. more info coming soon
Hi. Did you find a work around for this? So far I haven't been able to use the follow focus because of this.
@@TILTA When can we expect that?
can I use the nano ii wheel on camera for local control and the nuclear M wheel with my focus puller, easily switching back and forth to control focus?
That has only recently be made possible on a $30000 systems I doubt Tilta has a manual override on the nano II hence no answer
No, control has to be manually switched by changing channels, you cannot use two controllers on the same motor without them fighting over the motor.
Is the rocker completely analog? Meaning the more it is pressed, the faster it goes?
Yes, it's variable and you can feather the speed
no it's not, it is a combination of analog to digital gain. The FIZ has several settings to adjust the speed of the rocker, starting with the actual zoom rocker speed and ending with motor stiffness and sensitivity.
You say you will go over the handle firmware update at a later point, but I don't see that anywhere... I updated my wheel and when trying to do the handle it sits at 100% but then the handle doesn't boot. It only boots when in upgrade mode and shows the original firmware
Here is the link: ruclips.net/video/EMPZU0Y674Y/видео.html
You upgrade the Nano II firmware through Wi-Fi. Preferably through a mobile hotspot. Here's the link to the Nano II firmware update tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
Hi, I'm interested in this product for one shot in particular, where I would need a very slow, controlled and fluid zoom-out. Is it possible with this device to change the speed of the zoom rocker ?
Yes, within ‘Multiplier’ menu
Yes you can change the speed of the zoom rocker within the Nano II "Multiplier" menu
Hi there. It says you can use the new dji motor to focus from the nano wheel. But I can not see how to connect it. I bought the new focus pro motor - nowhere I can find how to connect it. The wheel has a dji flip even .. but not a description how to pair
Yes you can control the dji motor with the following attachement: tilta.com/shop/nucleus-nano-ii-hand-wheel-to-dji-ronin-control-adapter/
@@TILTA.. you can already do that on the ronin since it came out 🤪
This was about using it stand alone 🤷♂️
Is the only way to turn off the motor by disconnecting the cable?
Yes.
I've got an FX3 but it won't connect at all. done exactly what you've done in the video but doesn't work 😅
shoot us an email over at support@tilta.com and we will help you out! thanks
Can the REC button be used to initial recording on the Panasonic S1H via that camera's remote port? I have the Tilta cable labeled "For Handle/Motor" on one end (USB-C), and "GH/S series R/S" on the other (3.5mm TRS).
BTW, I am able to trigger recording on my GH5 and S1H with the old Tilta powered control handle, via a micro USB cable from the original Nano 1 motor to the cameras' remote port. So, that means the remote port on these cameras is working. I just can't get it to work with the Nano 2 control handle. I have the same problem with the Advance Focus Grip.
please shoot our support team an email and we will get you squared away!
I just updated the firmware of my handunit and N II motor. Where is documented what the firmware update actually improves?
as of now for the current firmware update there is no documentation but for future updates we will be listing out what improvements the firmware updates make.
okay, thank your @@TILTA
The focus ring on my lens has a long travel distance (270 degree), and when I turn the wheel to max or minimum, it doesn't make the lens to infinity or minimum focus. What should I do?
Manual calibration
EZ Mode doesn’t seem to connect the Nano 2 handle to the tilta receiver. Any tips on what to do?
Make sure you are double pressing the pairing button and it is blinking red. Try disconnecting and reconnecting the receiver and make sure none of the pins are damaged.
02:54 The one detail that threw me for a loop is when Nick said not to slide this onto a regular NATO rail. If I can't mount this on a regular NATO rail, I may be sending version II back in favor of version I. How would you mount this to a camera cage as shown in product photos or to a handle on a rail system? Is there even a single 1/4-20 on it? Did I miss something? He did emphasize "slide" so maybe he means to take care when mounting it.
The clamp fully opens so you can mount on a nato rail just don’t slide it or maybe tape the contacts
Is there a way to use the Nucleus M controller for this motor and Nano at the same time? I mean one for focus and one for iris
Yes that would work.
The interface for entering your own lenses is crude, doesn't appear to be explained anywhere but it kinda works (it's in System/Lens). Wish it would let you go back and edit the patches somehow. The software barely makes use of the hardware. Why can't you pre-program a zoom zoom or focus pull to time with a slider? Doesn't feel like it's delivering great value as it stands in 01.24. And the outlay for good usb c pd power supply isn't negligible either.
Lens Mapping is not fully functional and will be updated in a future firmware update! More information on how to use it will be available at that point.
I don't know why but when my nano ii doesn't show up the battery on screen, everything stays at 0 whatever I do and the motor doesn't move. Sometime, when the battery shows up that works and the next day that doesn't work for no reason. I've downloaded all the updates but when I reboot the hand wheel it said I have to download it again. I don't know what is going on. if someone can help me.
please send our support team and email over at support@tilta.com
Well my unit keeps disconnecting from BMPCC4K via Bluetooth, what's more after reset it forgets the WiFi password, any pointers to fix that?
Yes, next firmware will keep the wifi password to stay, the reason we set it forget cause some cameras will need to be connected by wifi. Bluetooth distance is 5-10 meters.
@@TILTA Ok, thanks for the reply:) Is there any expected date on the firmware release?
Retyping the Wi-Fi password every time is tiresome
When I map in my user lens it does not show the focal length of the chosen lens is there an option to show the iris stops and zoom distance on the main page or can you add a fourth page to display all three?
The torque doesn’t seem to change when set to the lowest option the gears often jump of the lens which effects the user’s mapped point and I have to hold the motor in place.
I also find after auto calibration you have rotate the focus wheel from infinity to minimum focal twice before unit shows correct focus points.
1. Lens Mapping is not fully functional and will be updated in a future firmware update! More information on how to use it will be available at that point.
2. The torque setting is only for controlling the motor not calibration, the newest firmware has a lower torque auto cal.
3. This does not sound common, please send support@tilta.com a video of your demonstrating this issue and we will get you squared away.
Is there a semless way to switch between the handle and the fosu wheel ? I would like to have the gripp attached to the camera and the wheel atached to the soulder rig. and to switch between those two on the fly when mounting the camera to a shoulder rig.
Yes you could set them all to the same channel then have the focus wheel control motor no. 1 and the handle control motor no. 2. You can then single tap the button the motor to change which motor number its assigned to which would change control between the wheel and handle.
@@TILTA I dont know if i undestood correclty, in your explanation you talk about controling motor nr1 with the grip and motor nr 2 with the wheel. But is there a way to control the same motors with the grip and with the wheel at the same time ? I have two motors attached to the camera. motor one and two. The grip is attached direclty to the camera and controls both motors. I have a shoulder rig with the wheel attached to it. So what i do is i just pivot the grip out off the way and mount the camera onto the shoulder rig via quick realese plate. And at this point i would like to control the same motors with the wheel. It seems there is no quick way to do that, without pairing the motors between the handle and the wheel every time.
Is there no auto calibration?
Hold the function button on the motor to auto calibrate.
How do you update the handle?
See download manual it tells you
Contact wheel to handle keep handle off
Connect to Wi-Fi
Turn on handle while holding M button
Go to firmware update on wheel scroll down to handle and update unit
Here is the tutorial: ruclips.net/video/EMPZU0Y674Y/видео.html
What does the rocker range parameter change? It's hard to tell, I've played with the setting and not much changes
Rocker Range is the speed when A/B points are set.
when the tilta nano 2 will be able to control and start rec on the sony a7 iv ? Is the firmware update release soon ? Thx
We are currently working towards to make this happen. More info coming soon on the next firmware update.
The set up of this needs to be simpler. Unfortunately I'll have to return mine, mine is calibrating but it just keeps spinning non stop, i able to connect however my focus wheel does not correspond with my motor at all.
The motor is designed to spin until it reach the end point of the lens. You can learn how to calibrate manual lenses and connect the handwheel by watching this video!
Can I expect R/S control for red comodo X?
Yes we have USBC run stop cables for Red Komodo to trigger R/S with the handwheel: tilta.com/shop/usb-c-run-stop-cables/
At the moment the control handle is only compatible with DJI run/stop cables.
Do will open the api communication protocol, will be nice to develop a compatible UEngine addon without the need of reverse engineering your protocol like we did with previous version.🤔
Please email our technical supervisor nick@tilta.com!
Trying to connect my Tiltaing Right Side Advanced Focus HandleType VI to the nano ii doesent work. Do I Need a specific cable or is not meant to work together ?
I have the same problem. I was told by Tilta a month or so ago that a future Nano II motor firmware upgrade would fix this 'over the next month or two'. So I hope it comes soon..
Right now it also doesn't work with Nucleus M handgrips. Once the NANO2 FIZ boots up - it switches all motors to be controlled from the NANO2 FIZ and it's impossible to unlink a motor from the NANO2 FIZ like it was possible on the M FIZ. Lots of stuff to be fixed still
We will be releasing a new cable for the Right Side Advanced Focus Handle to work with the Nano II motors soon.
@@TILTA ok Cool please Sent it to me for free it was advertised differently.
@@TILTA how about ability to control zoom from Nucleus M handgrips while controlling focus from Nano II? Basically an ability to remove link to sertain motor numbers in the nano II system like it is already done in the Nucleus M system and old Nano (I can use my NANO 1 simultaneously with Nucleus M grips controlling focus on my M motors)
Why can't it connect with the Sony with bluetooth, at least for the record function?
It is just only compatible with the usb-c port at the moment!
What if you lost control in the wheel but not handle?
Re-pair the hand wheel, recalibrate the motors, power cycle or contact Tilta support.
will it work with the BMCC 6K FF as well? please say yes!
The Blackmagic 6K Full frame will likely be added with an upcoming firmware update. Keep an eye out on our Camera Control Compatibility Chart on our website for the latest updates.
23:00 "You'll also want to make sure that both the control handle and the hand wheel are set to the same channel" - how please?
It's in the channel setting in the 2.4G Menu of the handle!
Have you got a part number for the right angle rosette adapter for the control handle?
It looks slightly different to the Nucleus M.
If it is, I hope it’s a little cheaper than the Nucleus M adapters!
Yes, here is the SKU: TA-RRA-1420
@@TILTA I have bought one already and find that it wiggles loose.
The locating pins aren’t snug so the handle can wriggle side to side, eventually loosening the handscrew…
Have you seen this before?
@TILTA Please, fix the ability to unlink a motor from the NANO 2 FIZ, like it is already done on the M FIZ. Right now when the NANO2 FIZ can not operate simultaneously with M handgrips, thus one can't control zoom on M handgrips and focus through NANO2 FIZ. Once the NANO2 FIZ boots up the M handgrips will stop working. Please, make it possible to unlink a motor in the motor menu, right now you can tap on the link, it will show you're tapping on it, but nothing happens.
This might be possible with a future firmware update, right now the only option to send control over to the hand grips is to power off the hand wheel or change the motor number on the motor!
@@TILTA actually, I've found a way around - powering the zoom motor by a different cable (not daisy-chained) and setting it to a different channel/motor number works. Switching a motor number when the motors are daisy-chained will not work, which is silly, considering nano1 didn't have that issue and had a better integration with the Nucleus M in this way (small nano1 on camera, with M handgrips used to control zoom).
I have a question, Focus Wheel can also be used on Sony lenses that have PZ? I would like to control the PZ function, without having to connect it to the Ronin, is it possible to work?
this is not possible
I have canon r5 and R/S usbc cable. And no idea how it works. Can`t connect each other. Have anyone manual?
How do you pair hand wheel with dji rs3 pro motor?
Yes you can control the dji motor with the following attachment: tilta.com/shop/nucleus-nano-ii-hand-wheel-to-dji-ronin-control-adapter/
i get motor error often to frequently, and i wish you would of included a usb wall wart, just so you could get immediately working, cause it don't like alot of power stuff. just got it, i have it setup for zoom, ive read all that there is, watching videos, updated firmware. ill call/email if problems continue.
Depending on the stiffness of the lens you might need a stronger power source like P-Tap, also have you tested this on different lenses?
Ex to get the mirage motor working... But how to use both the mirage motor as motor 1 and the nano ii motor in motor 3 for example?
Click mirage button for 4 times and you could select the motor number for mirage and then you could change the color for nano II motor to make it motor 3.
@@TILTA i'll try it out and get back to you guys. My mirage motor, when nano ii is in manual mode, works fine but since in manual only 1 Chan can BE active at any given time, even when i have the nano ii engine lets say, in Blue color, it does nothing on the front rocket/switch
what are the currents supports for FX3 and FX6?
You are able to control Run/Stop, ISO, Shutter Speed, and Aperture on the FX3/30 currently. We are working on an upcoming firmware for the FX6!
It doesn't find any deice in the device list while connecting....
Follow the steps in the video, or contact Tilta support with a video for help!
To all the Canon Users: Is anybody able to connect the hand wheel or the hand grip to the Canon R5C in video mode? Which USB setting in camera are you using? Which setting the the hand wheel. Nothing seems to work.
R5C is not compatible at this time! We are working towards making this work with a future firmware update.
When adding a manual lens, what is used to indicate infinity?
Infinity should be indicted on the lens itself. Please email support@tilta.com if you have any other questions regarding this.
@@TILTA there are lenses that can go past infinity (like most cine zoom lenses and some fix lenses), the lens hard stop is beyond the place where the infinity mark is. The question is - what should be written in lens value to manually set infinity for such lenses. Like I have tried just typing in "INF" and it sets it as a random focus distance very far away. Is this the correct method to assign the infinity spot of the lens or what's the trick here?
@@TILTA I'm talking about in the software. Without a way of indicating infinity, how do I properly map the lens?
There is an infinity symbol third input page but it doesn’t show when you choose the user lens it will just give you a numerical value but you you do get a symbol on the display ring
SONY CAMERAS CONTROL:
Unfortunately control (other than record button) with sony cameras is still very average.
Also, the loud vibration sound for each setting change is very unpleasant :(
Can you give us the option of switching it off or reducing it by 95%?
In addition. Each time I change the shutter or ISO there is a noticeable delay.
The delay is very bad . You can turn off the vibrations tho
Can I pair the new nano handle ii with núcleos m motors ?
yes this works
yes this works
i need conect to fujifilm xh2s...
this is something we are working towards.
@@TILTA I'm really looking forward to it
Very confused why they release all this vision of the handle and still the date is a mystery.
its Oct 20th tilta responded to my coment
Thanks mate!@@ivanovskiphotography2748
I ordered the handle and a 2nd motor, together with the base kit. Base kit arrived last week, and handle and 2nd servo shipped yesterday. Should arrive in my hands here in Australia early next week, but anyway, tracking info is updating. Hopefully that helps you a bit.
There has been a slight delay but it is looking like early November. Please keep your eyes peeled on our socials and website for more info regarding the official launch date.
Anybody here knows how to firmware update the side handle without owning a control wheel?
anyone know how to control a7s3 with the wheel through bluetooth or wifi? I cannot get it to work. Pairing works fine but ctonrols and info never go thru
Sony cameras are currently only compatible via USB-C!
Does anyone’s nuclear us randomly start calibrating or racking focus without touching anything??
You are likely getting some interference, try switching to a different channel.
My Motor is stuck on firmware update after multiple attempts to restart.
It’s now moving after a power cycle and the power for the motor needs to be on the bottom. No usb connection between the wheel and motor.
Please please please could you provide a ramp in and out of the zoom. And please please allow a much slower zoom to cover longer dialogue
Yes you can change the speed of the zoom rocker within the Nano II "Multiplier" menu
How to connect nano ii handwheel to dji motor via 2.4G?
I think it's not possible yet.
@@unihumi just got official answer - you right
@@unihumi yet
@@UR4UNV thanks for confirming with me
Yes you can control the dji motor with the following attachment: tilta.com/shop/nucleus-nano-ii-hand-wheel-to-dji-ronin-control-adapter/
cant get the bluetooth to find my camera
is it possible to connect it with A7sIII ?
Yes i use it with that.
@@poti732 how did you connect it? I tried wifi and usb-c but can't make it work... thanks
@@RobertoMettifogo you plug in the motor with the usb C port on the upper side to the camera's usb C and the lower usb C port goes to the powerbank / battery . You need to enable PC remote control on the camera settings to do this , if it is grey and you cant you have to turn off Smartphone remote control to turn on the PC remote control, from that it will work fine.
the point is the unit does not have to be connected to the camera just the motor so it is still remote , you can still use it in your hand or give it to another person .
@@poti732 I have just the hand controller, not the motor since I plan to use it with my AF lenses, but I can't connect it to the camera, nor with wifi or cable, did all you said and tried other ways but nothing..
So if i get you right you ONLY want to use the handcontroller to set camera settings and not to control the motor right ? If so ill tell you in steps again what you need to do :
step 1
you NEED some sort of tilta nucleus motor even if you dont use it to be able to connect the handwheel to your camera.
step 2
You will find 2 USB C ports on your tilta nucleus motor , the top USB C port OF THE MOTOR itself ( not the handwheel ) needs to be connected to the camera's USB C port .
Step 3
Connect the motor to some sort of powersource with the bottom USB C port on the motor .
Step 4
Enable PC remote control on the camera if you cant than disable smartphone control and you will be able to .
Step 5
Enjoy it is connected .
So the basic idea is that the motor has to connect to the camera not the handwheel and you NEED a motor do do this even if you dont use it because Tilta wants to keep the handwheel wireless to be able to operate from. a distance so it actually sends the signal to the motor and than the motor with the usb C sends it to the camera.
@@RobertoMettifogo
I just received the Nano II system with remote control grip. The included manual is in Chinese. I don't see an English version manual on Tilta's web site. Does an English manual exist?
Tilta product manuals can be downloaded at tilta.com/support-downloads/
PLEASE UPDATE THE NANO II WHEEL - IT IS AWESOME BUT COMMUNICATION TO RED KOMODO IS GARBAGE AND BUGGY. WE TESTED DIFFERENT WHEELS ON DIFFERENT RED KOMODOS. THE RECORD BUTTON WORKS IN 1 OUT OF 10 SCENARIOS. < 3
Hi folks, does the Nucleus Nano II works with the Blackmagic Camera app for iPhone 15 Pro/Pro Max? I am aware the Nucleus M and the previous Nano works. Just trying to make sure if the Nano II also works.
I haven't gotten it to work, yet. I'm hoping it's included in an upcoming firmware update.
@@dans2833 yes. Controlling the Blackmagic camera
Yes, it is now working with our new firmware.
@@TILTA nice! ❤️
I was just checking the latest version of the BM app on a whim and found that it works on last week’s update along with the latest Nano FW!Thanks Tilta!!! Awesome Christmas gift!
Can the motor be powered by plugging the USB-C directly into the USB-C port on the FX3?