It would be great if you could provide a drawing or even just a document with all of the materials used, measurements, etc. I really want to build this!!!
I wish lumber prices had stayed that low. This is a very good idea though. I want to build something like this for my mother bc she has a particle board desk that sucks. This turned out very nice!
This is perfect for what I need for my daughters room and seems simple enough to build. Did you have to rip the 1x2 strips down to make better edges when trimming everything out or did you just put them on as they came?
That is a very nice desk. Are you able to share the measurements, mainly the length from the middle to the end and the width. I am thinking about trying to find someone to build this for my wife, but I am not sure if it can fit in the area needed.
I like the video, short and sweet. Focused on the important aspects of the build. Great job. I've been looking into ideas for supporting the corner piece of a corner desk. I have my own Idea for a larger Corner desk with a cubby shelf that sits on top of the desk to make a computer monitor sit at eye level. I wish your desk wasn't gray and stained instead. But that is personnel preference. I like the trim idea, but I do have raw lumber I will be working with. But I have taken my notes and thank you for the video.
Hey great desk !!! But one question, what are the measurements of the cabinets, I've been trying to figure it out but I don't think my measurements would be correct since I'm not a carpenter. Thank you for the idea and hopefully you see my comment 😊
Your question is legit. The answers may mention going on the diagonal but his video said it's 24X24 " square. It's actually 20x20 " square with a 24 inch diagonal.
you say you measured 20" in from each side of the 38x38 square, but the ends of the 45 degree cut are flush with the edges of the 24x24 squares... That math doesn't work.
What a great Dad! My dad got me started on woodwork by letting me hold the wood down. Great job
It would be great if you could provide a drawing or even just a document with all of the materials used, measurements, etc. I really want to build this!!!
Surely you make it to fit your needs?
Nice,simple & clean looking,what more could anyone ask for? Top work man.
Awesome job. What are the dimensions of the cabinets ...width and depth?
I really like your video. Thanks for making it. I'm totally going to use your idea for the 45 cut on the top.
Great job!!! Love this desk
Very nice and simple design. Great inspiration for the one Im building. Thanks for sharing.
Love the shirt! You guys must have a great sense of humor.
Nice simple build. Thanks for sharing.
I wish lumber prices had stayed that low. This is a very good idea though. I want to build something like this for my mother bc she has a particle board desk that sucks. This turned out very nice!
Love the shirt 😂
👕
Luv the background music 😂
Thanks for the idea with the box shelves as legs.... Thanks brother
this looks great! I've been looking to build a desk and found this video. might have to try out this design!
This is perfect for what I need for my daughters room and seems simple enough to build. Did you have to rip the 1x2 strips down to make better edges when trimming everything out or did you just put them on as they came?
I put them in as they came.
That is a very nice desk. Are you able to share the measurements, mainly the length from the middle to the end and the width. I am thinking about trying to find someone to build this for my wife, but I am not sure if it can fit in the area needed.
That’s the issue I’m looking at. I’m thinking about building it in the room while it’s empty and being painted.
Yes please share the measurements thanks!
Please
Nice! I would add holes in the back for wired computers
I like the video, short and sweet. Focused on the important aspects of the build. Great job. I've been looking into ideas for supporting the corner piece of a corner desk. I have my own Idea for a larger Corner desk with a cubby shelf that sits on top of the desk to make a computer monitor sit at eye level. I wish your desk wasn't gray and stained instead. But that is personnel preference. I like the trim idea, but I do have raw lumber I will be working with. But I have taken my notes and thank you for the video.
Awesome desk that is a huge closet lol
Hey great desk !!! But one question, what are the measurements of the cabinets, I've been trying to figure it out but I don't think my measurements would be correct since I'm not a carpenter. Thank you for the idea and hopefully you see my comment 😊
Well done sir
Do you have anything on building the cabinets?
Great build but in the wardrobe, I bet he'll be doing homework in there 🤣🤣🤣
so the sides are 20" @ 0:31, so how the squares can be 24" @ 0:37 ?
Its 24 inch diagnol
Just like we measure the tv screen
@@rayedsamdani14 OK, I see. thx :-)
Your question is legit. The answers may mention going on the diagonal but his video said it's 24X24 " square. It's actually 20x20 " square with a 24 inch diagonal.
My dad wouldn't even put my molding up in my room let alo1ne build me a desk xD 10/10 already
I like your dad and I haven't even met him.
how did the cabinets came about? wish it was included in the video
Do you have any sort of blueprints we could use?
How wide are the shelf’s you made like from the side ?
For sure!
What are the dimensions for the shelves
excellent
How did you join the wings to the main piece of top?
Looked like he used a wood slat across both pieces and attached both pieces to that one slat using screws.
let me buy one please i really need a desk like this. arent many for sale either
Johnny , new profession ?
Was it a total of 1 sheet of ply?
Yes sir! One sheet - Measure carefully :).
@@MrGizmo211 lies!!!!!
❤❤❤❤❤❤❤❤❤❤❤❤
all good but the 1x2 price
Nice but definitely not for a beginner😁
Bud I really wanna watch this video but the wind is killing me. Can't do it 😩 Thank you for the time though
you say you measured 20" in from each side of the 38x38 square, but the ends of the 45 degree cut are flush with the edges of the 24x24 squares... That math doesn't work.
"OKEYEST" can sometimes be pronounced "OKEYISH" LoL,... Thanks for your video man, I am looking for an idea for my son's desk.
got plans at all?
Johnny Sins?
I felt like the video didn't really deliver.
Sorry you feel that way!
I'd still not feel comfortable without a leg on that back corner.
thats why he added a rail mounted directly to the wall for the support.
Your sons closet is as big as my room wtf
you're making a computer desk for your son's closet? You'd better knock before walking in.