Its called a detent wheel , i had the same thing happen but i also lost the spring as well , i upgraded it to a 2001 detent wheel and it shifts way better , but let me tell ya i was very happy to find out my tranny was still mint , took more time waiting for my part to come in then it took to fix ... by the way thanks for this video it helped me fix my bike insted of paying a mechanic, not like i would let anyone touch my bike anyway , i do all my work my self . Got my sporty in 97 and still ride it now its only a 96 883 but she moves and never lets me down ....keep up the goid work ....
First time I did this job, I didn't get the shifter shaft held in quite the right spot when setting the adjustment; had to take the primary cover back off and fiddle with it. Later, I found a cheap primary cover, I cut off a piece off the top side of it that locates the shift shaft & allows me to make the adjustment with that shaft held in the right place. Made the adjustment super easy on the next trans I did. Throwing this out there for my fellow "home gamers" who don't work on this stuff every day, and can benefit from the "third hand fixture" stuff that guys who do this every day might not use.
Mucho respect to you Tatro , for learning those younsters what’s all about mechanics , and sorry about the fuck-up on the trapdoor . I haven‘t been working on a Sporty for a Long time .!!
This guys is a great guy to learn from I so wish I was them kids u can tell he’s a a hole especially if he was havin. Bad day but yes deff the guy u shut up and just pay attention to because he’s got knowledge 👌👌👌
Hey boss any info on the gears I’d like to see a video n how the trans works and what gear it’s in while shifting through them trying to see why my 4th gear won’t inflate and where to look for
what if you don't have a manual and you have to think and figure things out on your own? that is what the videos try to teach. just about anyone can copy someone else but that does not mean it is correct. at some point you need to pull out that tool called your brain and go it on your own. as you can see i rarely use manuals and most instructions suck at best. there is always more than one way to do a job. as long as it works, that is all that matters. tatro
Tatro Machine easy Tatro, wasn't trying to outdo ya. Not many of us do have manuals, and yes you do a good job on teaching in the videos, hence their reason for you making them.
i have thick skin. just explaining how i do things. i have alot of manuals but i do not have everyone from 1930 to current for every harley made. i don't go the the manuals unless i have too and most of the time i just use command since. tatro
Tatro Machine You and me both. Manuals are nice to have but we both know there's other way to do things. Nice job on the work inside the primary. I delete the spring plates all the time. And I imagine you eliminate them on the twincam junk like I do too. I got a care package headed your way.
I’m fixing to go into my 04 Sportster 1200 because it won’t shift into third and fourth although it does hit third or fourth sometimes so I’m going to try to find the problem and was just reaching out to see if anyone had any ideas about why it’s not shifting into third and fourth any input would be helpful
One month after watching this, guess what? The 2002 XLH 1200 Sportster I own broke its retainer clip for the detent wheel and now barely shifts. I found part of it stuck to the drain plug. Talk about jinxed. At least I know how to fix it, parts are on order.
ok, going back to the old IRON-HEAD. you know the good bikes. When replacing the RACE BEARING and mainshaft, will you need to Line bore the race bearing in order to fit the new roller bearings, mainshaft in place or can you just install new race, roller bearings and mainshaft with out any adjustment ? Im rebuilding my transmission in my 82 ironhead.. and i have to repalce the race bearing and main shaft along with thrust washers, bearing and spacers .. the gears all look good as well as some of the thrust washers ..
all bearing races and bushings have to be fitted before you can assemble the other parts. only bearing assemblies like timken, torrington and ball can be assembled without fitting. tatro
I just did the primary gasket on my Evo XL. I wish i saw this vidio first, i would've inspected that clip more closely! So....where's everybody's front fender in California? I do like the belt buckle batt hold down, I might copy that.
Tatro hi, is it normal that cluch basket on sporter is a bit moving xross the shaft vector not paralel. very small moovement sideway maybe 0,05 inch. Or it has to be solid rock stable?
I have an 2002 Sportster as well,,, The exact thing happened to My Bike,,, what a Shitty retaining clip,,, Thanks for this Video Tatro, now I think I can do this Myself if it happens again...!!!!!
looking for a video on how the gears and dogs actually work to change each. plus a explanation of which gear is which... cool video.. oh, "eye patches" are the shit... 😀
@@TatroMachine ignorant comment.. do you not think I haven't done research or own manuals??? Get a friggin grip!.. poor response to a legitimate question.
it maybe a stupid response to you but that is how i learn. a good parts book is your best friend. it shows pictures of what the parts are, part numbers to find the parts, descriptions that tell you what the parts are and year model fitments. no one told me how this crap works, i figured it out myself. stop being a dumbass and get to it. tatro
I got more like a question that a comment I got a 1976 Harley Davies sportster 1000 I have a problem with my 3rd gear I wanna know what size retaining rings ago in the front in the back of 3rd year if you could help me with that that would be awesome thank you.
Tatro , you must be my brother the way you talk to your helpers ...Great Video , except for the ' prospects' and their camera holding ... Ride on bro .....I went to the Hardley - Able - son shop and they gave their typical bull shit replies , " oh we never heard of shift pawl shaft circlip and or spring failures "
This is where S.E Asian mechanics ( well Thais at least; wouldn't wanna generalize lol ) have the advantage. They can squat like frogs for long periods of time.
zoom in, loom out, no one is ever happy. without pay for a professional film crew you get what you get. by the way, how much are you paying for these videos. tatro
@@TatroMachine I wasn't trying to be disrespectful man... I couldn't see some of the stuff you were doing is all...No need to be rude. And like EVERYONE watching, NO-ONE is paying for it..
@@shotgunmoore2704 This guy has the personality of a broken bottle. I guess I'd be a grouchy douchebag too if I had to fix shitbox Harleys all day. If you want to fix bikes get a Harley. If you want to ride bikes get a Triumph or a Honda or a Kawasaki or pretty much any thing but a Harley. And if my mechanic talked to me like this geek talks to his customers he'd need some new front teeth.
That's good, going to teese the kid for trying to learn how to work on his own bike, damn of I would come around you, no matter how much I wanted to learn; I would just figure it out on my own, like I did everything else in my life, saved from having to kill idiots and then going to jail; just because you taught them how to keep their own mouths shut for a change. The kid just needs to start his own garage and build his own stuff and stay away from lousy teachers. Go buy a book and do yourself a favour.
Авто/Мото
Where would we be without that Gifted Man
Its called a detent wheel , i had the same thing happen but i also lost the spring as well , i upgraded it to a 2001 detent wheel and it shifts way better , but let me tell ya i was very happy to find out my tranny was still mint , took more time waiting for my part to come in then it took to fix ... by the way thanks for this video it helped me fix my bike insted of paying a mechanic, not like i would let anyone touch my bike anyway , i do all my work my self . Got my sporty in 97 and still ride it now its only a 96 883 but she moves and never lets me down ....keep up the goid work ....
Is it the detent wheel or plate?
thanks for help to find the little details to make a good job, greetings from Oaxaca Mexico!
Exact same thing happened to my 01" 883. Those detent clips are trash. Thanks for the vid tatro, certinly helping me with my repair.
First time I did this job, I didn't get the shifter shaft held in quite the right spot when setting the adjustment; had to take the primary cover back off and fiddle with it.
Later, I found a cheap primary cover, I cut off a piece off the top side of it that locates the shift shaft & allows me to make the adjustment with that shaft held in the right place. Made the adjustment super easy on the next trans I did.
Throwing this out there for my fellow "home gamers" who don't work on this stuff every day, and can benefit from the "third hand fixture" stuff that guys who do this every day might not use.
Mucho respect to you Tatro , for learning those younsters what’s all about mechanics , and sorry about the fuck-up on the trapdoor .
I haven‘t been working on a Sporty for a Long time .!!
Im about to do this to my 2001 1200C... detent clip failure.... helpful video thanks!
Dude this is the greatest channel ever. U need to keep giving all the customers crap. I love it!
This guys is a great guy to learn from I so wish I was them kids u can tell he’s a a hole especially if he was havin. Bad day but yes deff the guy u shut up and just pay attention to because he’s got knowledge 👌👌👌
We found two of the dowel pins were coming out making detent plate crooked! Remove them,nerold them,red lock tighten them in !
In his low profile he is a Great Professional ... unfortunately in Italy we don't have such GREAT professionals.
Hey boss any info on the gears I’d like to see a video n how the trans works and what gear it’s in while shifting through them trying to see why my 4th gear won’t inflate and where to look for
Can I get another gear box from yall and that manual you were using in the video
I'm wondering if that air compressor tank is the Start to a wood burning heater/stove ...
Nice custom engraving on the shift detent. You use a drill or something to set the linkage centered. The manual had some procedure on it.
what if you don't have a manual and you have to think and figure things out on your own? that is what the videos try to teach. just about anyone can copy someone else but that does not mean it is correct. at some point you need to pull out that tool called your brain and go it on your own. as you can see i rarely use manuals and most instructions suck at best. there is always more than one way to do a job. as long as it works, that is all that matters.
tatro
Tatro Machine easy Tatro, wasn't trying to outdo ya. Not many of us do have manuals, and yes you do a good job on teaching in the videos, hence their reason for you making them.
i have thick skin. just explaining how i do things. i have alot of manuals but i do not have everyone from 1930 to current for every harley made. i don't go the the manuals unless i have too and most of the time i just use command since.
tatro
Tatro Machine You and me both. Manuals are nice to have but we both know there's other way to do things. Nice job on the work inside the primary. I delete the spring plates all the time. And I imagine you eliminate them on the twincam junk like I do too. I got a care package headed your way.
yea, if it is not needed why put it in the bike to screw something else up.
thanks for the surprise.
tatro
Would 2005 sportster be same procedure i think they went away with the star shift thing
i don't think so. its a different bike. being a harley, i am sure it is not all that different.
tatro
I like this guy holy shit at 27:00 he asked him a question and he was answering the camera man but camera man didnt realize it was already an answer
Great , loved this garage , made me feel right at home . ( stupid customers 👍😄 )
Thank you
I’m fixing to go into my 04 Sportster 1200 because it won’t shift into third and fourth although it does hit third or fourth sometimes so I’m going to try to find the problem and was just reaching out to see if anyone had any ideas about why it’s not shifting into third and fourth any input would be helpful
One month after watching this, guess what? The 2002 XLH 1200 Sportster I own broke its retainer clip for the detent wheel and now barely shifts. I found part of it stuck to the drain plug. Talk about jinxed. At least I know how to fix it, parts are on order.
ok, going back to the old IRON-HEAD. you know the good bikes. When replacing the RACE BEARING and mainshaft, will you need to Line bore the race bearing in order to fit the new roller bearings, mainshaft in place or can you just install new race, roller bearings and mainshaft with out any adjustment ? Im rebuilding my transmission in my 82 ironhead.. and i have to repalce the race bearing and main shaft along with thrust washers, bearing and spacers .. the gears all look good as well as some of the thrust washers ..
all bearing races and bushings have to be fitted before you can assemble the other parts. only bearing assemblies like timken, torrington and ball can be assembled without fitting.
tatro
have any videos on how to do the line boring ?
inter sanctum lmao thats the best one ive heard yet with Al
i think that is near the pro shop.
tatro
Pat Moreno of colorado casers out there in Greeley
I just did the primary gasket on my Evo XL. I wish i saw this vidio first, i would've inspected that clip more closely! So....where's everybody's front fender in California? I do like the belt buckle batt hold down, I might copy that.
what do you need a fender for. it doesn't rain here.
tatro
Vid woulda been better if guy filming wouldnt have spoke.
WARNING! THIS VIDEO MAY CAUSE EPILEPTIC SEIZURES!!
Tatro hi, is it normal that cluch basket on sporter is a bit moving xross the shaft vector not paralel. very small moovement sideway maybe 0,05 inch. Or it has to be solid rock stable?
the splines do have some clearance in them.
tatro
@@TatroMachine appreciate
I have an 2002 Sportster as well,,, The exact thing happened to My Bike,,, what a Shitty retaining clip,,, Thanks for this Video Tatro, now I think I can do this Myself if it happens again...!!!!!
looking for a video on how the gears and dogs actually work to change each. plus a explanation of which gear is which... cool video..
oh, "eye patches" are the shit... 😀
read a parts book sometime and figure it out. that is what i do.
tatro
@@TatroMachine ignorant comment.. do you not think I haven't done research or own manuals??? Get a friggin grip!.. poor response to a legitimate question.
it maybe a stupid response to you but that is how i learn. a good parts book is your best friend. it shows pictures of what the parts are, part numbers to find the parts, descriptions that tell you what the parts are and year model fitments. no one told me how this crap works, i figured it out myself. stop being a dumbass and get to it.
tatro
Great job! Just saying LOL!!
I got more like a question that a comment I got a 1976 Harley Davies sportster 1000 I have a problem with my 3rd gear I wanna know what size retaining rings ago in the front in the back of 3rd year if you could help me with that that would be awesome thank you.
beats me, i just use the correct parts.
tatro
broke all these bolts on mine...can't get in....
will a 883 transmission work in a 1200 they both 88 sportster 4 speed
yes
Thank you
Pull as from work to do the clutch transmission repair.
Just curious, if you’re a shop why don’t you have at least a cheap lift?
is it possible to convert a 5 speed gearbox from a dyna or a fatboy / softtail onto a 1969 XLCH sportster?
no way.
tatro
What could I use then?
just stock parts. andrews has some different ratios but that is it.
tatro
Tatro , you must be my brother the way you talk to your helpers ...Great Video , except for the ' prospects' and their camera holding ... Ride on bro .....I went to the Hardley - Able - son shop and they gave their typical bull shit replies , " oh we never heard of shift pawl shaft circlip and or spring failures "
i am surprised they even knew what you were talking about.
tatro
wow whats this guy going through in his life?
You have really no idea what you‘re Talking about , now do you ?
what in the hell are you doing sitting on the floor at your age? Lordy me....I can't sit on the floor anymore...
whatever it takes to get the job done.
tatro
You the Rock, Tatro....the videos are great...thx.
Definitely disconnect the battery. If you don’t you won’t cut off a finger but if you do disconnect the battery you CAN’T cut off your finger.
Awesome
That star plate thingy ,what's the actual name of it ?
what is the time stamp in the video that shows the part.
tatro
Where‘s freakin trapdoor?
🤩🇰🇷👍🇺🇸
38:32
#1 on the work order **customer doesnt know how to ride bike. Ffs that killed me
yes, but true.
tatro
This is where S.E Asian mechanics ( well Thais at least; wouldn't wanna generalize lol ) have the advantage. They can squat like frogs for long periods of time.
so that is why the new harleys are made in india.
tatro
Slowest mechanic ever
you haven't seen me at the track.
tatro
Slot car track lol
Well it's not a race damn 🙂
It would have been a better video if the guy filming would have zoomed in a little better.. smh
zoom in, loom out, no one is ever happy. without pay for a professional film crew you get what you get. by the way, how much are you paying for these videos.
tatro
@@TatroMachine I wasn't trying to be disrespectful man... I couldn't see some of the stuff you were doing is all...No need to be rude. And like EVERYONE watching, NO-ONE is paying for it..
@@shotgunmoore2704 This guy has the personality of a broken bottle. I guess I'd be a grouchy douchebag too if I had to fix shitbox Harleys all day.
If you want to fix bikes get a Harley. If you want to ride bikes get a Triumph or a Honda or a Kawasaki or pretty much any thing but a Harley. And if my mechanic talked to me like this geek talks to his customers he'd need some new front teeth.
HA! Not using a clutch diaphragm compression tool...Never get the snap ring back on without one...
must have been a miracle than.
tatro
Tatro Machine LOL
You can make one with a 3 inch PVC pipe
fart @ 20:07
That's good, going to teese the kid for trying to learn how to work on his own bike, damn of I would come around you, no matter how much I wanted to learn; I would just figure it out on my own, like I did everything else in my life, saved from having to kill idiots and then going to jail; just because you taught them how to keep their own mouths shut for a change. The kid just needs to start his own garage and build his own stuff and stay away from lousy teachers. Go buy a book and do yourself a favour.
GaryLordsWayMinistry - ROTFLMSAO @ you and you’re immature little hurt feelings.🤣