Idiot Replaces His Harley Sportster Clutch in 22 Minutes
HTML-код
- Опубликовано: 3 окт 2024
- This book is going to help you understand the important “dos and don’ts” of the motorcycling world!
Get the guide ----- www.Motorcycle...
Watch in 4k! I'm just an average guy trying to change his Sportster's clutch after it blew up. I say the wrong terms, and my back fu**ing hurts. Watch as I struggle, but complete the process. Also, yes. It does work way better and it's complete!
Parts Used:
Barnett Extra Plate Clutch Kit: ► amzn.to/2xeEtgG
Compression Tool: ► amzn.to/2xdSdIp
Clutch Spring: ► amzn.to/2xSLDnH
Gasket Kit: ► amzn.to/2xe0hc7
Oil: ► amzn.to/2xeK4Dy
Oil Filter Funnel: ► amzn.to/2xfIxIq
MY FAVORITE GEAR:
► bit.ly/DDFMGear
MY T-SHIRTS:
► amzn.to/2uJxJlV
Support this channel by becoming a Patron!!! 🔥🔥🔥
goo.gl/n3bGJa 🔥🔥🔥
My 10 Beginner Motorcycle Rider Tips! • 10 Beginner Motorcycle...
Check Out My Sponsors:
► Thunder Press - www.ThunderPress.net
MY SOCIAL:
► Official Website: www.dandanthefi...
► FaceBook: goo.gl/HPCi8G
► Instagram: goo.gl/hngf8Z
► Twitter: bit.ly/DDFMTwitter
-----------------------------------------------------------------------------------------------------------
👇👇👇 FULL LIST OF WHAT I USE 👇👇👇
MY RIDING GEAR:
► Bell Bullitt TT: amzn.to/2d17mPO
► Roland Sands Design Dezel Gloves: amzn.to/2d19qaR
► S&S Rust and Redemption Jeans: amzn.to/2mn2RWo
► Roland Sands Design Tracker Jacket: amzn.to/2chhiWQ
► Fly Street Cool Pro Mesh Jacket: goo.gl/QeNHV5
► ICON 1000 Elsinore Motorcycle Boots: goo.gl/Cmrthg
MY EQUIPMENT:
► SENA SMH10r: amzn.to/2cqfRmm
► GoPro HERO4 Black Edition: amzn.to/2cucOM0
► Yi 4k Action Camera: amzn.to/2tdl9du
► GoPro HERO3 White Edition: amzn.to/2cqgWLc
► Tascam DR-05 Digital Audio Recorder: amzn.to/2d1aMCf
► Sony ECM-CS3 Stereo Lapel Mic: amzn.to/2d8IpkA
► DJI Phantom 3 Standard: amzn.to/2mdu6U2
► Ram Mounts Handlebar Rail Mount with U-Bolt Base and Universal X-Grip Cell Phone Holder: amzn.to/2gkWv3F
MY RIDE:
► 2012 Harley Davidson Nightster 1200cc (Sportster)
► Vance and Hines FuelPak FP3: goo.gl/Pp8RFr
► Roland Sands Design Fly-By-Wire Grips: amzn.to/2d8PxyB
► Custom Black 1" Short Riser Set For Harley: goo.gl/rA1CUX
► Biltwell Moto Bar Handlebars (Dimpled): amzn.to/2cKKbIl
► Burly Brand 20" Black Sissy Bar w/Pad: amzn.to/2eKdGMc
► Sportster LED Headlight: amzn.to/2urIsAx
► Burly Brand MX Style Footpegs: amzn.to/2fbGDEX
► Roland Sands Design Cafe Gas Cap: amzn.to/2cAkUWO
► Roland Sands Design Tracker 2-1 Exhaust: amzn.to/2cABbrv
► Roland Sands Design Speedo Relocation Kit: amzn.to/2cAAnTM
► Roland Sands Design LED Indicator Lights: amzn.to/2cUsQP6
► Mustang Fast-Back Seat for Harley Sportster: amzn.to/2cAlDHM
► Progressive 412 Series 13.5" Shocks: amzn.to/2ciCe1i
► Mitas E-07 Front Tires: goo.gl/ZyszNV
► Duro HF 904 Median Dual-Sport Rear Tire: amzn.to/2kT7B6P
#ScramblerSportster #Scrambler #SportsterScrambler #HarleySportster #Learning
**I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites**
DanDanTheFireman is not intended to be a source for advice. Visitors to DanDanTheFireman should always seek the advice of an appropriately qualified professional. DanDanTheFireman assumes no responsibility for information contained on this channel and disclaims all liability in respect of such information. In addition, none of the DanDanTheFIreman content will form any part of any contract between us or constitute any type of offer by DanDanTheFireman. Specific disclaimers may apply in addition to certain content or parts of the channel. DanDanTheFireman hereby excludes liability for any claims, losses, demands, or damages of any kind whatsoever with regard to any information, content, or services provided, including but not limited to direct, indirect, incidental, or consequential loss or damages, compensatory damages, loss of profits, or data, or otherwise.
How To Ride A Motorcycle
how to ride a motorcycle for beginners
Visitors to the DanDanTheFireman Channel should always seek training in person from an accredited training facility. DanDanTheFireman and its owners, assumes no responsibility for information contained on this channel and disclaims all liability in respect of such information. DanDanTheFireman hereby excludes liability for any claims, losses, demands, or damages of any kind whatsoever with regard to any information, content, or services provided, including but not limited to direct, indirect, incidental, or consequential loss or damages, compensatory damages, loss of profits, or data, or otherwise.
Dude! For anybody that hs this 883 this is the video! This was wonderful of you to do and publicise. I know from screwing around with my own vehicles over the years that its quite tedious, but simultaneously rewarding upon completion. Also the funds saved is formidable. But to have messy hands and still record the process. Well, that command respect gratitude and a specific degree of admiration.
I haven't ownership of any bike, but I still recognize this and you. Thank you.
His hands weren't messy because he used nitrile gloves. So do I and they save an impressive amount of time wasted in hand washing. They also work both ways. Got dirty hands and want a snack? Glove up. Walmart or Harbor Freight gloves work fine.
You’re the Man! Just did my Buell xb12s last night. Followed your steps one by one. My C clip was a bit tougher.
THANK YOU!
Excellent video. I had to do that on my sportster at around 40,000 miles but nothing was broken, the plates were just worn thin and slipping. It's due again soon with 82,000 miles now, so it's nice to review the procedure by watching your video.
I hope it's working good for you now!
I just got back from Tucson on Saturday, nice area and plenty of fun places to ride. Also rode to Safford and Mt. Graham, very nice!
When you come to a stop light and the bike is still moving forward a bit with the clutch pulled in then tighten the clutch until the bike does not move forward, I am mechanically inclined, you did a wonderful job, my son had to do what you did years ago as I watched, I told him to follow the instructions and i'd tell him if any thing was wrong, he did just right.
Are you talking about tightening the clutch at the cable or inside the primary cover? My 05 electraglide does that and also doesn't seem to engage (or disengage, however you want to look at it) until practically all the way out. How do I fix that issue too?
I'm glad it was so easy for you. Mine was torture. I compressed the spring, & there wasn't enough's room to get the clip out. Compressed it more, and heard a "snap," more, and heard another "snap." Oh shit, I've broken something. But I was able to get the snap ring out 3/4, but then I was stuck. What to do? I loosened the compressor 1&1/2 turns, then had an idea. I used my smallest pin punch, and a hammer, and gently but firmly tapped on the clip. I tapped it all the way around, and it did fall out, freeing the pressure plate, and access to the clutch plates. Once inside, the plates came out easily, until I got to the culprit, the spring plate. It was falling apart, with bits of "shrapnel" everywhere. Old plates out, new ones in. I had to compress the pressure plate again to get the clip back in, but that was a POC compared to getting it out, which was a PITA. The rest was just reassembly and adjustment. The Point: this task was nowhere near as easy as you portray, yet I accomplished it despite the difficulties.
OMG Thank you so much for this video!!!! I'm doing this tonight, and glad I can follow you along. Very good instructions. Thanks Again!
Started watching the show just last year, stumbled across this video just tonight, what a gem to find!
Use your inspection cover plate to fill your primary oil !
and your sporty does take exactly 1 quart of oil !
Thanks for good demo! This seems tedious to the back though. If you don't have a jack or similar to lift the bike, then put it under a roof in a garage, carport or similar. Then just you raise the bike to vertical using a ratchet strap you attach at the ceiling. This plus a low stool make my back hold out yet some time.
I don’t ever comment on RUclips videos... but this has been the best how to video I’ve ever seen. Well done 👍
Thank You for the Video..Just got finished changing the Clutch..Not so Bad. Your Video made me try it myself rather than take it in to the Dealer. Thanks again for the Help !
The Sportster clutch bomb is the only major design flaw in the Sportster and Harley should have fixed that by now. Shame on you Harley!
Nice video!
Just some notes:
1) if the shifter shaft is corroded clean it up before removing the cover to avoid damage to the seal.
2) wrap one thin layer of tape over the rough part of the shifter shaft again to protect the seal.
3) use a lift if you have one so the plates don't fall out.
4) check the retaining ring before releasing tension.
5) I prefer to coat new gaskets with grease before assembly. The stickiness of the grease hold it in place and removal for the next time is much easier.
6) adjust the clutch before replacing the cover so you know everything is assembled correctly. Spray some lube on everything under the boot cover to keep it from corroding. I think I used WD40.
7) I used a whole quart of oil in mine or maybe it was a liter and all is good. My Sportster is a 2016 model so maybe it is different. Also I am using the tranny oil from Harley and I would recommend that over the engine oil. I think the engine oil is too thin.
8) grease will hold that o-ring in place under the derby cover.
9) I would use blue loctite on the footpeg bolts.
And use the proper torque specs on all of the bolts.
ALSO: the torque spec in the manual is sometimes incorrect so those not mechanically inclined should google it to compare with manual values.
The clutch and the fact the Sportster is a girl's bike realy cripple it
Hey man these are some great tips, thank you! I'm just wondering, what should I be looking for on the retaining clip in #4?
Thank you for giving me the confidence to replace my clutch. I wouldn't call myself anything near a mechanic but I can do general maintenance on my bike and car to try to save on any labor charges. This was a lot of steps but it wasn't that bad other than needing the clutch compression tool. Luckily I have a stand to keep the bike upright, as opposed to a rock. :)
i kept telling myself i couldn’t do this at home because i live in an apartment but you just proved me completely wrong
Just about to do this to my sporty thanks for making this vid it's helped alot, been following you for awhile now and almost forgot you did this vid.
This video helped me remember how to put it all back together. Swapped motor and smoked too much. Then I was really happy to see the ol’ QT cup in the background. 918 baby ✊
Thanks... helped me a lot. Took me a lot longer than 22 minutes but it went well and learned a lot.
Just started watching your videos. Couldn’t tell if you were an actual firefighter or not, but I saw the mustache and thought Yepp, that’s a fireman’s mustache. Lol
awesome!! thank you doing mine this week..Note fyi some clutches like energyone ya cant use synthetic oil
Nikki = Best GIRLFRIEND EVER ? For sure she hold your clutch :D!
Good job. Just a touch of criticism, if you have a bunch of debris inside the clutch, next time, just blast out the primary with parts cleaner to ensure all debris is out so you don’t chew up new parts. You may have done that, just wasn’t in the video. But good job and I like your vids.
I do the same thing, then use air compressor at 40psi to blow out any pieces that might still be lurking around in there.
Okay... I ditched the Barnett idea and experimented. Boy, am I glad I did.
I just fixed my old HD 2006 Sportster clutch and spring plate problem and my bike runs better and shifts better than ever. How did I do it? I removed the pack of plates, found the exploded spring plate took it apart and kept the two steel rings. I then lined the two up as perfect as possible. I offset the original holes for the brass fasteners leaving no see-through holes. I took my MIG welder and tacked the smaller of the holes on both sides with about 4-second bursts tacking the two steel plates together. I then took my angle grinder and dressed them. I filed the ears so that the plate would mount like the single steel plates nice and smooth. I filed the inside of the basket where the damage was left by the original plate making sure no plates would hang up on any of the damaged areas. I then installed new fibers with the old steels making sure that the welded pressure plate would be "past" the damaged area when installed. I then put it all back together and took it for a ride. WOW! It shifted smoother quieter and grabbed very well. It was a trial thing and am I glad I did it. The only size difference is the thin springs that were between the two steel rings are gone and it had no effect... except a GREAT shifting clutch now! I did soak my fibers for 3 days before installing.
for your back bro, get the mechanic chair with the wheels when going motorcycle jobs, they are awesooome
Thanks bro. You helped me complete my new Energy One Clutch install
BTW the Motion Pro is the best of the tools offered for this job, but you can use a hunk of PVC with a piece of suitable PVC scrap metal as a cross brace. The first one I made many years ago used the center of lawnmower blade and a flat washer. It works fine but you'll like the Motion Pro tool a bit better.
Did mine today. This was very helpful. Thank you.
I wish it only took me 22 minutes, took me a couple of hours! Although half of that was trying to get the snap ring back on. I used the Energy One clutch, which is an extra plate kit as well (my grenade plate went last time). Good video, yours was the first one I watched before doing my own
Broke clutch plate putting in energy one ...wich way did the washer go in before the c clip???
Thanks for sharing, I'm doing mine this weekend and this is the video I'll be using as a reference
Damn dude, your girlfriend is so clutch.
Shes a real Catch.
Dont let her.. Slip.. away.
Dont.. Blow.. It
You should.. Engage.. her.
Lol i could go all day
An idiot can do it in 22 minutes but it takes me 3 hours 😅
Lots of cleaning and fine adjustments were made.
Thanks for the upload. It really helped!
The clutch on a sporty isn't that hard to do but I wondered, does your engine oil has all the additives for clutches? I prefer to stick to a proper primary/transmission lubricant for this although I know nowadays lots of people simply use the same engine oil everywhere... When I do a sportster I usually simply used the inspection cover so I can dump a quart there from dry condition and do my chain adjustment at the same time. It's easier when you do the bike on the kickstand. Just my two cents.
You forgot to adjust the primary chain tension...
Thanks! We're both in the same boat then. Not an expert, but I like doing this stuff with my two sons.
Oil goes in primary a Lot Easier if you leave the chain inspection Cap OFF, and watch the level through the Clutch Cable Access Plate Hole (where You filled it)... so Many try pouring oil in a hole that was never intended for such a thing... hope this helps
Haxall Mobil I pour my oil in through the inspection cover, less of a pain in the ass
Yup, Partslist starts with a cold beer! a great bike got a 91 1200 and had a Barnett clutch put in.
I saw a wrencher use a two cup measuring cup filled it and a half times, close to 3/4 of a qt. patio blacks could be safer.
Perfect video Bro! just what we needed
Dude u helped me so mutch I didn't know how to detach the clutch cable! 🇧🇪🤘🏻
Nikki's expression is hurry up idiot I was trying to bake 🍞 lol good job Dan.
Well the video is 22 minutes long but apparently it took you way more to do it... I'll keep it anyway in case I have to change mine ;)
Nicely explained... great for a novice like me. I feel confident enough to give it a try.
Hi, I am interested in the measurement of the compression tool. Especially the inside and outside diameter of the base plate pushing against the clutch. And the height from the baseplate to the top of the tool. It would be much appreciated.
Ugh I know that appartment life it's horrible, I want to buy so many things to simplify my maintenaince. But I ain't got no personal garage and all that..sigh.
You did a good job tho
JAY BEE I live in a duplex. Just as cheap as apartment but I have a garage
What is that tool called. Or is there another tool to use to push the plate basket back to remove the snap ring
Learn something new today! Thanks for sharing this video.
Your one "Ballsy Dude" changing a clutch in a parking stall. I have a shop with a table lift, lots of light and all kinds of comforts and lots of time to do it and still I don''t know if I would attempt it on my 2014 Sportster "48" . Kudos's to you!
Tom the retired Calif. Cop
I am changing mine out on my driveway, outside, on the ground, possibility of rain, heat, wind, birds, clouds, spotlight cuz this is taking me forever, never done this before. I am also 64 and having a great time, better than sitting watching tv. hehe, i'm just messin wit ya, although everything i said is true, just i think most DIY ppl prolly do this like me, and Dan of course. I am going to upgrade to the Hammer 1250 jugs and git me sum badass lifters and cams, be doin' that in driveway also, ain't got none of that there comfort stuff, ...sigh.
Thanxx for having Nikki help
Nice to get someone to help you bro
Nice job
Nice job, i didnt see the chain tension put back in.
I been hear you use 20/50 bike oil. but I use transmission primary chaincase lubricant . it is 1 QT I look at the book for your bike. he right get a book for your bike . mine of the book can found on line all so an put on a tablet.. have both..
Yea man having a lift to do these kinds of things is HUGE. Comes through in the clutch, actually har har har
very fun to watch. i did mine at 34,000 to find out what really happened. lucas additive not used to directions, dumb ass me went 50% instead of 20%. put a kvlar clutch in and still doing fine. love lucas products and used ever since the racing days. great for air cooled engines (hint, hint) and "all" automotive needs. hope you keep doing these videos. very enjoyable and will put this one on my playlist of repair videos (hope it helps) for others to learn from. have a good and safe one bro!!!!👍✌😎 oh, now you know to put the bike up high, easier on the back.🤣 ~t.bone~
I believe using motor oil is fine for the clutch assembly itself, but it may not be the optimal for the gears. There is a fluid specific to the primary which I would recommend using next time for optimal protection for both components.
The Service manual calls for 20w50 in both the engine and primary on all 883/1200 Evo’s.
@@BlackMountainCyclesbut atf works better
Appreciate you bro. You think you can do one of a shifter pawl adjustment/repair? Other video I find are pretty wack
Aching backs while working on motorcycles or cars life of a mechanic 😂 I feel ya there man
I know this videos old but there is a spec for the clutch freeplay usually 10 to 20 mm measured at the tip from all the way out to just before where it starts to grab
You fill it from the chain inspection cover, the little two screw cap. Also, never power wash around any place you don't want water to get into. That's just rookie mistakes.
I have done 89.000 miles on my 2000 sportster 883 and clutch is still going strong, but may do this at 100.000 miles, whether it needs it or not 👍
I went and installed with Energy One Clutch with a 15% stronger spring plate. Great video at 30k, did your clutch not grip at highway speed or accelerating? Fyi, i use a couple nailed 2x4's to use at center stand instead of rock.
CafeNightster I’m looking at getting this kit and glad to hear it’s good
Did you have to leave the motorcycle on each gear? Neutro?
What rims and tires are those? I just acquired a 1200 custom that is destined for offroad use.
WI have a 2001 with 50,000km never replaced the clutch yet but I have replaced clutch bearings twice
Exzellent Video. Thank You. Greets from bavaria
The spring plate in my clutch on my 2004 I believe is going out so I’ve stopped riding it this week and ordered this clutch kit. I’ll probably watch this video 20 more times next week during the install. How much different does the new extra plate clutch feel?
That nut on the clutch cable adjustment is called a jam nut.
Been watching your newer videos, strange to see you pre beard!
great video, What year is the sportster clutch is that?
Sadly my Sportster is already having a clutch issue at 1800 miles. Already been adjusted a few times. Harley says they can't find an issue. So I think I'm going to replace mine
Sounds like some lame excuse to not fix a factory problem. Fuck Harley and their high priced mechanics
you are still lucky than me, my bike clutch damage at 445 mile
@@paxlepham did Harley replace it for free? Mine just went out at 4200 miles on a 2019
Very useful, thank you! Did mine last weekend.
Dan Dan with a beard > Dan Dan with no beard lol
I skid my bike in the rain. Now it won’t shift above second gear, I have the service manual and want to try and fix it my self. Any idea what it would be, broke right now and can’t go to a mechanic.
What did you figure out ..???
You didn’t include the Torque spec for the primary cover why? And do you know it?
I have noise coming out of primary when bike is warm i hear it while in gear also while in nuetral while rolling down the road i even shut the bike off and hear it im hoping its clutch and not transmission bearings i have to get to by splitting the engine?
Great explanatory Video..Keep up the good work !
Bravo dude. You're an inspiration!
Where was this video 6 months ago? Lol. I did the same to my sportster in April. Nice video
That moment you said "F..." LOL
I have heard many times that Sportster clutches break up after about 15k to 30k miles. A friend said his Sportster had almost 70k miles on it & had not had to replace his clutch. Please respond I'd like to hear what everyone thinks. Thanks.
All depends on your riding style. Take it easy (as HD intended) and your clutch will last. Ride like me, kill a clutch in 10k. lol. Ride it like you stole it!
Just had to replace my 1200XLR's clutch plates at 12k.
As the saying goes some people abuse everything. There is a fine line between abuse and driving it hard. Then again on the other hand some people should just buy a bus pass. My sportster has 45,000 km on it the bike and clutch still work like new. Last year was the first time I adjusted it. The dealer told me it would be wore out if you never adjusted it. I said no it still works just as good the day I bought it. The clutch was slightly out of adjustment but no problems and was not slipping. I am a mechanic and I don’t fix things unless they’re causing trouble or broken. As the saying goes if it works fine” leave it the hell alone. “ A quote from scooter tramp Scotty.
You wish that took you 22 minutes.
😂😂😂😂
His video is 22 minutes not his work maybe you missed that part
It took me two days of struggling with the clip just to get the pressure plate off.
@@floridasoldier7416 you’re not too bright are you
I stick a rare earth magnet near the end of a screwdriver or pick, works great.
I think you're confusing torque procedures with removing things. It matters what pattern you torque everything with, it matters not the pattern you remove the fasteners.
You are wrong I hope you’ve learned this in the year this comment has been out lmao sorry bro
@Jdawgin I replaced the clutch pack on my bike. Didn't matter a bit the order I took the bolts off. Sorry bro
@@TwoTall1988 I warned you lol it will bite you in the ass one day. Hopefully you don’t become a tech.
When you took the clutch apart and found those broken metal bits, would it make sense to stick a magnet in there to try to find all the small metal bits? Just seems likely to miss some of them...?
Jay Dillon magnet wouldn’t work as the rivets that break up are brass.
Is it 9 frictions and 8 steels?
HA I use same oil. Nice video, having a hard time getting clutch adjustment right wondering if something else is going on.
Engine oil for transmission?! Or I misunderstood something?!
Damn boy that is some mustache you got sporting on the damn sporty
So Barnett is better than OEM? What's better about Kevlar over carbon fiber? Does the kit come with the case gasket?
you never showed yourself putting oil back into the clutch case? did you need to do this?
Did it continue making the same sound when you try accelerating cause I replace mine the other day and it continue doing the same when I try accelerating it kept reving while I try increasing speed
Thanxx for the help and the video man.
Great video and thanks for sharing! Have you had any slipping issues using synthetic trans oil? I am about to install the BDL extra clutch plate package and the instructions recommend using ATF and to stay away from synthetic oils.
Hey Dan, I was wondering where and how you installed all of the other smaller gaskets that came with your kit. I recently bought the same exact one for my sportster but I was wondering if you had like a diagram of where they’re supposed to go. Thanks
My 2009 XL883L has a issue that it won’t run after shifting gears
Do you know what kind of issues it that
Thank you
Thanks for the video. Did you have to adjust the primary chain afterwards? If so how did you do that?
Well, i see it has been 3 months now, i guess you figured it out. Just in case the chain tensioner is underneath the primary, almost looks like a oil drain, a big nut with a bolt going though it, that bolt has a slot for a flat head screwdriver, loosen the big nut, turn the bolt with a screwdriver WHILE KEEPING THE NUT STILL< OR IN THE SAME POSITION. Just turn the bolt, NOT the nut. Turn the bolt to loosen or tighten the primary chain, when it is like it is supposed to be hold the bolt in its' place with the screwdriver and tighten the nut.
Great video mate... Really clear instructions and yes my fucking back was killing me
Hey bro how did the clutch hold up, just ordered one same kit you got. I got an issue with my bike hoping it’s the clutch. Seems weird not using the spring plate. Curious what ya think of yours.
Nice learning video thank you for that
Long day? Title says 22 min! Wtf
well the video is 22 minutes, so that can't possibly be it
Do you have to pre soak the friction discs prior to install.
Thanks..Great Video...Does the bike need to be in Neutral or in gear before you pull the Case off and start removing the cliches ? Thanks
neutral
What symptoms were you experiencing that led you to change out your clutch?
I have a Nightster as well and I’m having issues shifting gears however I have inspected the shift shaft assembly and it looks fine. I also adjusted my clutch at the derby cover to start with no improvement. Not sure if at this point it could be the clutch internally
over good video. I mite add to raeders lay out the part on clean space. an where the cable hock in to is called a ramp it need to looked at there is 3 ball look at them for damage if damaged replace. all may change out the throw out bearing . he did a good job nice video shoot . ty . but next time show the re packing of the throw out bearing an ramp with grease may need a packer for the throw out bearing on older bike look at the one you have go from there. not all the same. have to say he did good on video an edit .