HTML-код
- Опубликовано: 15 окт 2024
- 20150823172041 1
#105 HSR42 42mm Mikuni carburetor rebuild and install 1200 Sportster Harley XL 1990-03
see what it takes to take an eBay HSR42 42mm Mikuni carburetor and install it onto an 1200 883 evo sportster.
after that i installed a new dyna 2000i ultima ignition to really start to make some power.
lots of problems to watch as i work them out.
tatro
you guys don't know how lucky you are to have somebody like Tatro who will take the time to give you the custom stuff that you want... and explain it to you.. I mean I know you're paying for it, but he's making sure and going over and above to make all this stuff work for you,, a lot of guys won't do that they'll just get it,, slap it on and say there you go.... that's four times that I've seen him take that carburetor apart to make sure it's right.. I just hope you're keeping his fridge full your a lucky bunch of guys...appreciate while you can... Bravo' Tatro....
izzynutz2000 yeah I wish he was even remotely close to where I live.
izzynutz2000 true that! Custom work always takes more time; I avoided anything non-OEM like the freakin' plague... sure, I could do it, but working on stock stuff *always* goes faster (read: made me more money).
Bottom line: this guy's getting good work AND lessons; I hope he is gonna' understand the value here!
The Carfarmer These kids don’t care, they just want their bikes runnin.
@ that's awesome man!...
This is the end of a generation of guys like TATRO
So much knowledge and so willing to pass it on
Mr Tatro is a Harley Davidson god! I hope someone is picking up all his knowledge that works with him because most HD shops won't work on any shovels or evo engines and for that matter even twin 88s
Great video fun and very instructional. The old videos are awesome Keenan. Tons of knowledge. Great teacher
" not that I've ever done that before.......on purpose" Tatro
You are exactly the kind of person I'd like to work for. You have the knowledge, and challenge others to think ahead during the work.
I find myself answering the questions you ask, or trying to anyway.
Thanks for the videos.
I enjoy watching your videos. Reminds me of the old days here. I have a Mikuni VM38 on my Shovelhead. Runs good and good gas mileage too. Not as high performance as the HSR , but has been reliable on mine. Had a 38 VM on my old Sportster too.
a good vm38 will out run most any other carb overall. and they are cheap.
tatro
I have a sporty with the 1250 hammer kit on it and I'm about to put this carb on. Glad you made this little series! Its gonna help me out.
Very cool.... Good on ya tatro helping out people like you do man.... Your a good dude....I keep saying I'm gonna buy some tribo off ya, second week of December you'll be hearing from me... I'm glad I found your channel man, now I can't stop watching!....
This video never gets old tatro!...that kid can ride man, ....cool bike as well
Thanks Tatro Machine for the plug wire info.
These two should have way more helpful during the move as should Fred and Allen. Imho
this guys a genius quiet listen and learn
OMG I watched all ~6 + hours of repairs from the Alley. I need help haha.
The filtered breather that makes sure debris free oil drips onto engine drives me nuts on this bike. Great to see a real world bike that is actually used get repaired and built up. Worlds most watched Sportster..
Tatro is good. Dealers wouldn't let that bike in the shop
thats ok, i don't let the new bikes into my shop.
tatro
How did you set the Idle speed knob to start off? Not the idle air screw, the other one that in like cable and a knob. Turn it all the way to the right (clockwise)?
It’s guys like that the world a better place
Hopefully your counting your blessings
That's a 1992 883 tank. I bought that identical bike brand new for $5,500 in Bridgeport Ct, my first Harley!
best is when u kick it and it tries to run out from under u ;)
Bad ass mechanic ..
Those Sportster carbs are awesome!
Cool i was saying fit the cover upside down. Excellent video as usual i watch them all the time
Why the love for Makuni carbs? The stock Kenneth and S&S are reliable and much simple to tune , I always thought..
because they come ready to go because they were made that way right out of the box. they are very adjustable so that you can make them run on almost anything. they also make very good power.
tatro
You don't want to be loopy bro. Trust the wise biker man.
i noticed on the ultima ignition unit he has the VOES selector off when he has one connected and is running the fastest curve,,,Is this right? as i have one too and was told to run VOES and curve 3,,, standard 1200 xlh
time to be a big boy and test what works best for your application.
tatro
haha good answer !!
Old vm 38 on stroker ironhead or s&s super e.....your thoughts?
the vm38 is the way to go. they work on everything and are fully adjustable if not right on.
tatro
Hey Tatro, a friend of mine has a 42 mm dual Mikuni carburetor with a twin cam manifold by rivera and he wants to get rid of it for really cheap... I have a 1974 sportster xl and I was thinking about modifying the manifold and making it fit. I don't know much about carburetors and I'm wondering if 42mm dual carbs will work in an Ironhead or is it to much? thanks
not a chance in hell.
tatro
Hey Teatro, I have a 99 road king haveing problem with my Merrell fuel system wht would u suggest
@Al Gottsch thanks
Have you ever disassembled the bowl parts, port and check valves for accelerator pump? I think I have check valve issue?
Hey Tatro, what would a good hand expect to pay by the hour to bring in a hunk of junk Harley, hang out with you and tinker with some crap, and talk smart with each other? I can push record pretty good.
Just wondering how you charge, by hour or by project.
by the year.
tatro
Very clever and honest response. Now here is a odd ball question, do you allow Triumph in you shop? yes I own two, a 1969 and a 1999, they have both been sitting for 3 years, just wondering. I like them. Not really, but want to get them up and kicking and get rid of them..@@TatroMachine
Tatro has patience with this dude .
OK have the same carb on a 2005 1200 sportster getting a lot of low and coughing and popping what size main jet should be in this bike or can you point me into a direction
Walker laughing at ANYBODY is ridiculous considering his Idiocy!🤣🤣🤣
How do you get the bike to start up like that? Sounds great!
give it what it wants by adjusting things correctly. its called tuning.
tatro
Thank God for electric start.
Good video! Keep it up!
나는 한국인인데 타트로 씨를 매우 좋아한다. 나의 문제는 영어를 익히지 못했다는것이다. 이런류의 공장을 가지고 정비기술을 발휘하는걸 동경한다.
About plug wires,if you want to get better overall performance out of them,find the lowest resistance wires possible and make them short.
that only works until you do not have enough resistance and you burn up the ignition module.
tatro
@@TatroMachine What would you suggest the minimum resistance be for plug wires for stock '97' sportster ignition?
150 ohm per ft or more.
tatro
Quick question i have a 2000 twin cam it has some work se heads cams a jetted 40 cv carb and its paired to a se 6 speed trany. What size mikuni carb would be best for me. Thanks so much john
start with the hsr42 and if you think you need more go to the 45.
tatro
Thanks so much tatro
Does someone know the model of the front tire please ?
Which size are those shocks?
great looking sporty
Hey what us the best way to shine the rocker boxes and side covers like the cam and primary? On Sporty's like that
hard work or pay to have it done.
tatro
@@TatroMachine So there is no miracle product you spray on and wipe off instant shine? I have seen this paint product you brush on and turns your substrate to chrome. Well chrome looking. I'm not a fan of chrome I like polished aluminum
thank you for the video guys, really helping!
Does anyone know what bars they are ?
Looks like biltwell
Z bars, got the same on my ‘95 Bad Boy
A decently built Sportster doesn't even start running until above 4000RPM.
Get a good set of pipes and he is all set.
Where is located this shop?
Dago, sorry San Diego
I get the tool bucket,who would steal tooks out of that
So that's the $100 eBay knock off carb ???
no, just a $100 junk ebay carb. it didn't work on their bike so let someone else fix it.
tatro
I cheated...skipped right to 50:05. Tank full of "Red Bull". Too damn funny!
Pleased to see you've spent some of that $350 on a haircut 👍
Timing should be set at the two dots not the hash mark
the two dots should be the rear cylinder timing mark. that is why you should check for tdc with a phillps screw drive so that you really know what mark is the correct one.
tatro
There is no socks w them boots ( te-he)
53:22 haha come on bro..nice sporty tho
Hardly...that boy got that Sporty so screwed up...especially with those fugly pipes.
Mikuni is the best carb for an H-D. He would probably be better off with a 40mm on a stock bike but then he's got those drag pipes which unless you're drag racing are probably the worst for the street.
that boy needs a bicycle.
If you have a machine and no manual, you don't have a machine, IT has you. Tatro makes a living on folks with no manuals }:@ lol
i didn't have a manual either. just my brain.
tatro
brains n common sense are a scarce commodity these days, but I guess a smartphone can suffice depending on the user >_
beats me, i don't have one and not really looking to get one.
tatro
Man.... must be nice. I gotta have one for work. That and because I don't use a PC. Keep up the good work Tatro keeping bikes on the road :)
11green11 he makes a living off of years of knowledge not contained I'm manuals.
Ok as a carb tuner… it’s a 1200cc motor and you have a shitty air filter system.. absolutely love your main tech but he needs to explain more. I have a 1200s 2000 and it would work this bike without any try…. You guys are weird out in Cali… hence how I ride my other friends like krusi / east coastin’… you guys can’t figure out sea level and I’ll bring my ole 2000 1200s that’s dialed and watch you go “how is his that fast”
i got lost in your response. all i know is the jetting changes all the time, whether its the gas, weather or altitude. all of that changes the power too.
tatro
Let it warm up bro or you're going to go through some rocker box gaskets.
tools,sorry
Maestro Tatro strikes again.
do you have a vid of a total rebuild of bottom end of shovel head mine is a 80 model,if so can you link me to it.like your vids and how you teach you make people think when building.
look in the playlist.
tatro