grande Alberto.......realizzi i gioielli che sognavo io di farli fin da bambino, ma che purtroppo non ho potuto mai realizzare questo desiderio !.ti auguro migliaia di questi capolavori.!------.Andrea
Grazie Andrea, puoi sempre pensare a questo lavoro come un hobby e provare, alcuni lavori non necessitano di attrezzature particolari e danno comunque soddisfazione.
Wonderful again another brilliant video, I have learned a new setting from you, I am currently working on the broad base prong setting. I will hav a go at this prong setting next. Thank you so much for sharing. Bravo!Ciao until your next video👍
You make it too easy! I know it's not that easy and you have to be talented to do it perfectly and the right tools to do it. It was definitely entertaining. Now I know how the ring is made. Thanks.
Very nice work. I just started lost wax casting. I don't much like working with wax so I have also started learning how to solder. Think I need a better torch though.
What do you use to protect your hands in polish? I see you wearing gloves and something in the fingers, but of what material they are? Congratulations on the wonderful work!!
it depends on the upper part and on the client's needs, I always try that in the end everything is proportionate. Of course the thickness underneath and on the sides should not bother, usually I keep the lower thickness of 1.20 mm / 1.30 mm
+scaffoal thank you so much!!!!!! your rings are awesome. i'm trying to learn to make rings by my own. and i learn so much from your videos. so thank you! by the way. i'm from chile south América.
F-n WoW ! You have the hands of a true artisan. I hope they don't divorce and that gorgeous ring doesn't find it's way to some pawn shop. Statistically a horrific tragedy
Nice Job!!! you opened up my mind. Thank you. I love learning new ways of making jewelry. Thanks
+julio miranda Thanks you
you are an inspiration to me, thank you. please do not stop making videos
beautiful. and I didn't ever know that you could even make a diamond engagement ring this way. but it looks like you most certainly can do it!!!!
+Suzanne Byars Thanks a lot
I've never seen this technique used before to make the prong setting. It is very clever, I will try this. Thanks!
+Libertin9000 Thanks you
Nice making........ simple & short cut making........ same I'm gold & silver ring's making..........
grande Alberto.......realizzi i gioielli che sognavo io di farli fin da bambino, ma che purtroppo non ho potuto mai realizzare questo desiderio !.ti auguro migliaia di questi capolavori.!------.Andrea
Grazie Andrea, puoi sempre pensare a questo lavoro come un hobby e provare, alcuni lavori non necessitano di attrezzature particolari e danno comunque soddisfazione.
Wonderful again another brilliant video, I have learned a new setting from you, I am currently working on the broad base prong setting. I will hav a go at this prong setting next. Thank you so much for sharing. Bravo!Ciao until your next video👍
+DLR Creator thanks a lot
You make it too easy! I know it's not that easy and you have to be talented to do it perfectly and the right tools to do it. It was definitely entertaining. Now I know how the ring is made. Thanks.
Very interesting. I enjoyed this video a lot. What a beautiful gift God has given you. Thank you.
Amazing what you can do with basic tools - bravo! Can you tell me what make of hammer hand piece you are using? It seems very quiet, which is great.
Very nice work. I just started lost wax casting. I don't much like working with wax so I have also started learning how to solder. Think I need a better torch though.
Struck ZB Thanks, I use to weld the propane gas.
Amazing work!!! How many carats does this diamond have on the video?
Thanks, It is about 1 carat
What do you use to protect your hands in polish? I see you wearing gloves and something in the fingers, but of what material they are? Congratulations on the wonderful work!!
Michelle Marques I use gloves light and fingers in leather that are found in supply stores for goldsmiths. Thanks for having enjoyed my work
Wow you are an expert in your art!! I love to see you create 😊
Thanks a lot
What's the jig you pull the wire through to make it square called? Also is this a round diamond and if so do you remember the carat? GREAT work btw!
ryan cox a rolling mill, and I believe he said 18ct white gold on another comment.
¡¡benditas tus manos!!! maravilloso!!
Good work very intruest, excelent
thanks
Un travail précis un art noble
Thanks
wow mashallah god bless you
good job
Thanks
Hi! Great videos, real helpful. Just one question...What is the thickness of wire you use for the ring shank? Thanks 😁
it depends on the upper part and on the client's needs, I always try that in the end everything is proportionate. Of course the thickness underneath and on the sides should not bother, usually I keep the lower thickness of 1.20 mm / 1.30 mm
Excuse me I'm a nube, what material actually holds in the secondary stones?
diamonds
That would be such a great video! Do you sell the jewelry you make?
+Danielle Callahan Yes . Normally I made jewelry on request . Working by hand can not produce them in series.Thanks
may i know whats the sticky wax used in 7:10 ? been trying to find it but couldn't manage to. Thanks in advance!
Is MASTICS FOR SETTING
If it's what I think it is then it's jeweler's pitch.
that was fun to watch
well made ring! any suggestions on going pro?
thanks
very nice work , thanks ,,,
Great work! A question: why I see it's white color?
+Nguyen Tran Anh Vu Thanks.It is white gold 18k
I'll take one of each, please!
I like the wqy you make your rings:)
Estephanie Cardona thanks very much
Hi, great vid. do you have dims for this ring ? i would like to have a go at this :)
Thanks for information you can contact scaffoal@oro-diamanti.it
belo trabalho!
gostei também da música do início do video.
obrigado
good job scaffoal👍👍👍👍
thanks you
I work like you. but you're good and expert in the field of jewellery.
Great man. Thanks for sharing.
thanks
what is the tool you used to open the prongs is called ? i usually make them by hand :(
To close the prongs I use Hammer handpieces Faro
i meant when you marked the cross and hammered a knife like tool to open it @ 1m44s
I use a gravers for engraving and setting.
Very nice
what is the tool you use at the end, with the heads that hold the stone. it's name?
+Benjamin Guerra handle hammerer mark FARO SPECIAL (in italian MANIPOLO MARTELLATORE FARO SPECIAL)
+scaffoal thank you so much!!!!!! your rings are awesome. i'm trying to learn to make rings by my own. and i learn so much from your videos.
so thank you!
by the way. i'm from chile south América.
Benjamin Guerra Thanks you
F-n WoW ! You have the hands of a true artisan. I hope they don't divorce and that gorgeous ring doesn't find it's way to some pawn shop. Statistically a horrific tragedy
dadrules714 Thanks
isn't that a pavè? :) amazing work.
+Maia Waive No, the cobblestones is when filling a space with many gems close.
It's beautiful.
thanks
@@scaffoal You're welcome.
very nice
The song at 3:10? I really love it
+Trứ PC The songs name are:
Lonesome_Avenue.mp3
Parasail.mp3
Haunt.mp3
Hang_Ups_(Want_You).mp3
Bet_On_It.mp3
Very nice job how much euros could it cost ?
The price depends on the gems that included
scaffoal p
+5 magic +7 posion +9 fire defense
+Aizendor Sama Thanks
Aizendor sweet
Have you ever made a Claddagh ring?
+Danielle Callahan Nobody have never asked me, but i can do it without problems.
Can you?
Thank you for sharing.
Renata Freitas Thanks
Beautiful
thank you
meraviglia!
grazie
thank you for sharing
Thank you!
what's the future of jewellers? Is the industry doomed? don't wanna get into a dying industry where it all ends up computerised and mass produced
Until, people will want to stand out with personalized jewelry, there will be space for the craftsmen.
👏👏👏👏👏👏👏👏👏
thank you
this is it!!!
Lindo :)
gracias
wow
That open cut on your thumb never heals, does it? . You are the master. Glad i didn't watch all your videos.
thank you
why do i watch jewelry videos?
+Icaro Leite I hope because it has intrigued.
imperious ring
Tapok2000 Thanks
Tanks you.
thanks a lot
YES ♥
thanks
Legal
I've went ahead and featured your video on my page. Great work, by the way. You can see it here:
facebook.com/LevantJewellery
Levant Jewellery Thanks very much, is an honor for me.
very nice
Bikash Kumar I know
very nice
Bikash Kumar I know
very nice
Bikash Kumar I know
very nice
thanks