The best way to apply Resolene or Angelus Acrylic Finisher is with a airbrush. Go to Harbor Freight and one of their 1/5 air compressors it come eith the hose and airbrush kit, use the 20% coupon to save some money. Practice in some scraps of leather until you get the hang of it, if you are a professional leather worker or what a professional looking job when using acrylics or dyes, use an airbrush. No mess and no damaging your finish. I know I make veg tan briefcases and I cover them all with Angelus Finisher to make them waterproof. Thanks for the video.....
thanks much, very helpful. i've a leather jacket where i'd used some citrus dissolver to remove small flecks of white latex paint and even tho i wiped it off fast and flushed it with leather cleaner, the top coat of the shiny leather was removed on a 4x4 millimeter area. i was looking for something to apply to restore the shiny coat to that very small area and found resolene to be the most suggested. but using it for my specific purpose was never discussed. your video was great in showing how to put the resolene on and what to expect, and it looks as if it will be perfect for my purpose when it arrives in the mail. thanks.
It's coming off but it's only what you need to rub off before you apply the resolene, or do what I do and apply with a super fine makeup brush. It leaves no streaks because of the very fine texture it has
Just a suggestion. I’ve had success using resolene but diluting it 50/50 with water, and then use a small brush and a light hand. The light the coat the better. And then apply multiple coats. I came to see how you faired with the leather sheen because resolene application takes to long for me.
@@oakridgereview1359 I’ll have to give that a try. I like Resolene because it’s the only thing that seems to seal the dye in well. My biggest qualm is having to treat it with kid gloves because it can scuff so easy. Drives me nuts.
@@Funkbass85 “something something … patina” haha 😂 I don’t disagree. I’ve not had anyone complain YET about the finish. But not to say someone wont ever complain. I airbrush dye my pieces and then within 20min, 50/50 mix with a moderate to heavy coat. Then buff instead of wiping off excess. It helps even out the dye some and gives it a nice slick top.
Do you have any recommendation on a satin leather sealer? I've used Eco Flo Satin Sheen with good results but wanted to see what else is out there. I know Angelus has matte and satin acrylic sealer, but seems people complaining of matte being too glossy. I tried resolene years ago in a test, and that stuff was way too glossy and made leather look like plastic. Though I don't think I cut it 50/50.
a lite coat of neatsfoot makes my dye-jobs less Resolene soluble. Also more time you give the dye to dry the better. I got impatient with a belt and the top coat turned semi-opaque.
If I wipe this onto black leather hand bags which the colour is coming off a little bit onto white clothing ...does it seal the colour so if wiped with a tissue no colour will come off?
Yes either one will work with black leather. Apply 1 layer, wait for it to fully dry then buff it with a soft cloth. Repeat until the color stops coming off
the goal is to get the resolene on quickly and remove it quickly with a shop towel, not a paper towel, what your'e using is not appropriate for your project.
BadBoySwag420 how do you apply the resolene? I’m dying a leather handbag. Bottom of bag had discoloration and I have tried to remove but no good results. So I was going to dye same color. Should I dye the whole bag or just the bottom? And when you say shop towel are those the blue towels in a roll? First time to do this. Thanks in advance.
@@JediMasterVis The blue towels are still basically paper towels. So they will shred and leave behind fibers. You want real shop cloths made of cotton or microfiber. You can buy large packs of them at auto stores for very cheap.
Should you ever apply Resoline on the “suede” side of the leather? Cause I’m wondering how to prevent the dye from the suede side from coming off on the jeans.
Newbie question here; dyeing leather for the first time so any help will be appreciated. What is wrong with trying Resolene first, and then coat it with Leather Sheen? I am asking because I have used Leather Sheen on my jackets to give it shine and protection, and I was under the impression it should be on top.
I've found that the dye comes off or streaks with resolene. But if you use an airbrush or a real soft touch it works better. I started using an aerosol leather sheen 1st and the. Resolene and works great
I haven't tried it yet but I heard if u dilute it with water it works well. But cleaning the airbrush has to be a pain. I've been wanting to try a pneumatic airbrush with it so there's less cleaning.
Thank you for the update on Resolene in use. Did you ever get around to experimenting with diluting Resolene into a perhaps more manageable consistency? I have several small knife sheaths now treated with Fiebing's Carnauba Creme (but no fresh dyes), awaiting a Resolene overcoat. I definitely don't want an uneven looking final result, but I have no previous experience with these paparticular substances. Thanks.
As far as an even finish, I think you could use the resolene at full strength or polluted and it will go on evenly. The only difference will be the less diluted the less shiny of a finish. Undiluted resolene looks almost plastic when put on heavy.
Thanks, Madame K. I may have to study this further, as I *really* don't want a plastic-y look for these items! Heavy water protection should not be necessary for EDC or "walk in the woods" conditions for something leather worn on a belt.
@@frederickj.7136 I've been using a Fiebings leather sheen spray and it works really well. Good water proof and natural finish. I usually use that then conditioner last.
Yes, maybe I should try that first as an overcoat on the two small natural leather finish belt sheaths. Two more have some artificial (deep black) top finish on the otherwise decent leather... which were the best I could find "off the shelf", after much searching, to fit two small 2-7/8" fixed blade knives from Cold Steel. I expect the Resolene can be applied evenly and with confidence to these two. Thanks!
I water down resolene have found it goes on less thickly and much smoother. I have gone up to 50/50 mix without losing any of the properties of resolene. I do however find you need a few coats
I was reading you can water-down the resolene to help avoid streaking - - you'll get streaks if it is applied thick. Once water down, it can even be applied with an air brush. You should really rub down your dyed leather before applying the resolene to try and get as much bleed-off from the leather. Since Resolene is an Acrylic product, I am wondering if you are actually making the leather firmer / stiffer by applying the two coats on that second sample. Maybe this will help you a little-bit :::: ruclips.net/video/8HtcBgkeQpg/видео.html
This color is eco Flo evening blue. I use it a lot and cut it with water 1:1 to make a bright light blue. Any suggestions for an alternate dye with a similar result?
@@MadameKsMiscellany This person is talking about the Fiebing's Pro dyes specifically. They have little to no "rub-off" after you've dried and buffed the surface. They do have blue in the Pro dyes, but not sure if you can get the same color you currently use. Also, best way to apply resolene is with an airbrush, there is literally no way to do it better than that. You can buy cheap kits for like $25 on Amazon and they put out the perfect pressure for leather work.
You should apply the resolene with a damp sponge. You'll get much better results.
The best way to apply Resolene or Angelus Acrylic Finisher is with a airbrush. Go to Harbor Freight and one of their 1/5 air compressors it come eith the hose and airbrush kit, use the 20% coupon to save some money. Practice in some scraps of leather until you get the hang of it, if you are a professional leather worker or what a professional looking job when using acrylics or dyes, use an airbrush. No mess and no damaging your finish. I know I make veg tan briefcases and I cover them all with Angelus Finisher to make them waterproof. Thanks for the video.....
Wear a nuisance mask, the overspray will be in the air you breath
thanks much, very helpful. i've a leather jacket where i'd used some citrus dissolver to remove small flecks of white latex paint and even tho i wiped it off fast and flushed it with leather cleaner, the top coat of the shiny leather was removed on a 4x4 millimeter area. i was looking for something to apply to restore the shiny coat to that very small area and found resolene to be the most suggested. but using it for my specific purpose was never discussed. your video was great in showing how to put the resolene on and what to expect, and it looks as if it will be perfect for my purpose when it arrives in the mail. thanks.
Try cutting the resolene 50:50 with water also moving air such as a fan eliminates streaks
It's coming off but it's only what you need to rub off before you apply the resolene, or do what I do and apply with a super fine makeup brush. It leaves no streaks because of the very fine texture it has
Just a suggestion. I’ve had success using resolene but diluting it 50/50 with water, and then use a small brush and a light hand. The light the coat the better. And then apply multiple coats.
I came to see how you faired with the leather sheen because resolene application takes to long for me.
I do 50/50 as well but it dampen a sponge and rub it in. With alcohol dye it helps spread it out
Also, I immediately buff with a pre washed linen or canvas sheet.
@@oakridgereview1359 I’ll have to give that a try. I like Resolene because it’s the only thing that seems to seal the dye in well. My biggest qualm is having to treat it with kid gloves because it can scuff so easy. Drives me nuts.
@@Funkbass85 “something something … patina” haha 😂 I don’t disagree. I’ve not had anyone complain YET about the finish. But not to say someone wont ever complain. I airbrush dye my pieces and then within 20min, 50/50 mix with a moderate to heavy coat. Then buff instead of wiping off excess. It helps even out the dye some and gives it a nice slick top.
Do you have any recommendation on a satin leather sealer? I've used Eco Flo Satin Sheen with good results but wanted to see what else is out there. I know Angelus has matte and satin acrylic sealer, but seems people complaining of matte being too glossy.
I tried resolene years ago in a test, and that stuff was way too glossy and made leather look like plastic. Though I don't think I cut it 50/50.
a lite coat of neatsfoot makes my dye-jobs less Resolene soluble. Also more time you give the dye to dry the better. I got impatient with a belt and the top coat turned semi-opaque.
I used a dense sponge it worked great
If I wipe this onto black leather hand bags which the colour is coming off a little bit onto white clothing ...does it seal the colour so if wiped with a tissue no colour will come off?
Yes either one will work with black leather. Apply 1 layer, wait for it to fully dry then buff it with a soft cloth. Repeat until the color stops coming off
the goal is to get the resolene on quickly and remove it quickly with a shop towel, not a paper towel, what your'e using is not appropriate for your project.
BadBoySwag420 how do you apply the resolene? I’m dying a leather handbag. Bottom of bag had discoloration and I have tried to remove but no good results. So I was going to dye same color. Should I dye the whole bag or just the bottom? And when you say shop towel are those the blue towels in a roll? First time to do this. Thanks in advance.
@@JediMasterVis The blue towels are still basically paper towels. So they will shred and leave behind fibers. You want real shop cloths made of cotton or microfiber. You can buy large packs of them at auto stores for very cheap.
Should you ever apply Resoline on the “suede” side of the leather? Cause I’m wondering how to prevent the dye from the suede side from coming off on the jeans.
Yes, I've used resolene on the fuzzy side. It changes the texture too. I haven't had an issue with using it on that side too.
Newbie question here; dyeing leather for the first time so any help will be appreciated. What is wrong with trying Resolene first, and then coat it with Leather Sheen? I am asking because I have used Leather Sheen on my jackets to give it shine and protection, and I was under the impression it should be on top.
I've found that the dye comes off or streaks with resolene. But if you use an airbrush or a real soft touch it works better. I started using an aerosol leather sheen 1st and the. Resolene and works great
Would using a cheap air brush help in applying resolute???
I haven't tried it yet but I heard if u dilute it with water it works well. But cleaning the airbrush has to be a pain. I've been wanting to try a pneumatic airbrush with it so there's less cleaning.
Thank you for the update on Resolene in use. Did you ever get around to experimenting with diluting Resolene into a perhaps more manageable consistency? I have several small knife sheaths now treated with Fiebing's Carnauba Creme (but no fresh dyes), awaiting a Resolene overcoat. I definitely don't want an uneven looking final result, but I have no previous experience with these paparticular substances. Thanks.
As far as an even finish, I think you could use the resolene at full strength or polluted and it will go on evenly. The only difference will be the less diluted the less shiny of a finish. Undiluted resolene looks almost plastic when put on heavy.
Thanks, Madame K. I may have to study this further, as I *really* don't want a plastic-y look for these items! Heavy water protection should not be necessary for EDC or "walk in the woods" conditions for something leather worn on a belt.
@@frederickj.7136 I've been using a Fiebings leather sheen spray and it works really well. Good water proof and natural finish. I usually use that then conditioner last.
Yes, maybe I should try that first as an overcoat on the two small natural leather finish belt sheaths. Two more have some artificial (deep black) top finish on the otherwise decent leather... which were the best I could find "off the shelf", after much searching, to fit two small 2-7/8" fixed blade knives from Cold Steel. I expect the Resolene can be applied evenly and with confidence to these two. Thanks!
I water down resolene have found it goes on less thickly and much smoother. I have gone up to 50/50 mix without losing any of the properties of resolene. I do however find you need a few coats
Can oil/wax penetrate through the leather sheen and resolene? Thanks
I've always used Aussie conditioner after resolene and it seems to still absorb.
@@MadameKsMiscellany Thanks for the info, appreciate it
I was reading you can water-down the resolene to help avoid streaking - - you'll get streaks if it is applied thick. Once water down, it can even be applied with an air brush. You should really rub down your dyed leather before applying the resolene to try and get as much bleed-off from the leather. Since Resolene is an Acrylic product, I am wondering if you are actually making the leather firmer / stiffer by applying the two coats on that second sample.
Maybe this will help you a little-bit :::: ruclips.net/video/8HtcBgkeQpg/видео.html
Thanks!
Use less resolene and a sponge or airbrush
Stop using water based dyes. Oil also cal led pro dye won't bleed no matter what you use to apply it.
This color is eco Flo evening blue. I use it a lot and cut it with water 1:1 to make a bright light blue. Any suggestions for an alternate dye with a similar result?
@@MadameKsMiscellany This person is talking about the Fiebing's Pro dyes specifically. They have little to no "rub-off" after you've dried and buffed the surface. They do have blue in the Pro dyes, but not sure if you can get the same color you currently use.
Also, best way to apply resolene is with an airbrush, there is literally no way to do it better than that. You can buy cheap kits for like $25 on Amazon and they put out the perfect pressure for leather work.
@@TheLeathersmithShop do you need to thin the Resolene when using a air brush? Or can you use it directly?
@@cobblerq1thin it with water
Do you apply the finish to front and back?
Yes, I always seal both sides but depending on what I'm making I might not always dye both sides
Thank you!@@MadameKsMiscellany