Every Keyboard PLATES Sound Comparison | Which one sounds the best?

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024

Комментарии • 81

  • @0xArkemi
    @0xArkemi 10 месяцев назад +15

    that spacebar is a hate crime, good video tho, the editing was nice and you put effort on it!

    • @ClickandThock
      @ClickandThock  10 месяцев назад +2

      ahah you are right! It is fixed now! :)

  • @honghungho9818
    @honghungho9818 2 года назад +23

    I love it when you use a decibel motintor to measure the loudnest of the switches, please do it in every soundtest if it isn't cause to much trouble. Thank you very much

    • @ClickandThock
      @ClickandThock  2 года назад +3

      Great!! Will do it from now! Thanks ! :)

  • @ammertos1517
    @ammertos1517 Год назад +42

    that Space bar sounds awful

    • @jessicaho19
      @jessicaho19 Год назад +13

      The way this guy types should be a felony

    • @ClickandThock
      @ClickandThock  Год назад +2

      Thanks Jessica..! :P

    • @CackleTV
      @CackleTV Год назад +1

      Bruh it really does

    • @yj-yuanjun
      @yj-yuanjun Год назад +1

      @@ClickandThockjessica is right

  • @sodathief
    @sodathief 2 года назад +7

    best comparrison video on plates i have seen so far and I have watched a lot.

    • @ClickandThock
      @ClickandThock  2 года назад +1

      Thanks mate! :)

    • @inspire1ove
      @inspire1ove 8 месяцев назад

      far from the best. the whole recording is scuffed

    • @Bloodysugar
      @Bloodysugar 6 месяцев назад

      To me it sounded pretty accurate to the feelings these materials give, and it was quite useful. But Keybored did a great job to explain objectively why such differences exist. Hearing is on thing, understanding is an other. They complete each other great though, no competition there. But to me what I'll remember is Keybored final chart, not the sounds I hurd in any video. And as a thock lover it helped me to avoid POM when PC does slightly better at a fraction of the price. ^^

  • @Scouter-qh5qz
    @Scouter-qh5qz 12 дней назад

    Where can I find plates for the Lemokey p1 from keychain. I’ve searched everywhere and could find any

  • @bublik8961
    @bublik8961 10 месяцев назад +4

    Mega thanks! Your channel always helps out when I need information

    • @ClickandThock
      @ClickandThock  10 месяцев назад +1

      Glad it helped! Thank you!! :)

  • @taimanchan7490
    @taimanchan7490 Месяц назад +1

    hi! i hv a question, which material do you think is the best for quiet keyboard, i am going to build a silent keyboard, i am thinking about PC or POM, do u have any suggestions to me, thank you so much!

    • @ClickandThock
      @ClickandThock  Месяц назад

      FR4 imo. defetively not PC, all my test where louder with PC...

  • @MasterChief0093
    @MasterChief0093 Месяц назад +1

    It sounds like fr4 and carbon fiber have the deepest tone. In the video it even seems that carbon fiber makes a deeper noise than fr4. Is that right?

  • @haihao2942
    @haihao2942 Год назад +2

    What'd you think is the loudest plate (interms of volume) ? is it CF or aluminium?
    Some people believe it's CF because of the higher pitched sound that it produces, some believes it was alu...

    • @ClickandThock
      @ClickandThock  Год назад

      Yes, depending the case, that could be the CF because of the Higher pitched sound!

  • @alexisabreu1
    @alexisabreu1 4 месяца назад +1

    Hey comin back after a year… this was an awesome video. what would you recommend in terms of dampening sound? I feel as though the Aluminium or Carbon fiber but the FR4 also seems to do great in it. I am bit stumped :(

    • @ClickandThock
      @ClickandThock  3 месяца назад

      I think the FR4 would be the most "damped" of all.. .Thank you! :)

  • @jenkmeier2406
    @jenkmeier2406 2 года назад +8

    Thank you for the effort :)
    feedback if you want to make more videos like this in the future.
    It would be interesting to see the sound difference in a properly gasket mounted keyboard and tray mounted one in comparison and most importantly spacebar and backspace key should have well tuned stabilizers.

    • @ClickandThock
      @ClickandThock  2 года назад +1

      Thanks man! Great advice thank you! Stabs have been changed since! Will be great in the next video!!

  • @thirtyacres7504
    @thirtyacres7504 8 месяцев назад +1

    I have high sensory and POM makes me feel like I am hallucinating. I cannot explain why. FR4 would be my pick. Currently using a steel plated keyboard (GamaKay TK75) and it is exceptional. I am looking to add a second keyboard.

    • @ClickandThock
      @ClickandThock  7 месяцев назад +1

      Never tried Steel on modern board, need to do it! :o

  • @Sortsylic
    @Sortsylic 25 дней назад

    FR4 + SA on Speed Bronze are really a typewriter!
    But I have to say that the case itself makes a big difference. I have a roomy Vortex PC66 kbd with PC plate and it sounds really different. I wouldn't like the PC plate if I watched this video before.

  • @mizuto1
    @mizuto1 Год назад +2

    What might the quietest plate be? I have an aluminium and pc plate option on my keyboard but I can't figure out which one I want more. I want it to be quieter but the pc plate is a bit weird in my opinion and the alu plate just feels better to me even tho it's stiffer.

    • @ClickandThock
      @ClickandThock  Год назад

      Good question.. .Haven't measured noise amount of each... Would say pc since it flex and absorb part of the shocks, so sound...

    • @mizuto1
      @mizuto1 Год назад

      @@ClickandThock makes sense. I have been running the pc plate for a while and I'm kinda digging it to be honest. The sound is pretty nice. The feel is pretty neat too.

  • @Drunken_Hamster
    @Drunken_Hamster 2 месяца назад +1

    The one I consistently liked the most was FR4.

  • @defox_nz
    @defox_nz 3 месяца назад +1

    the space bar really ruins the sound test…

  • @inspire1ove
    @inspire1ove 8 месяцев назад +1

    remove the foam on your microphone and it will be better

  • @tarunjairath
    @tarunjairath 9 месяцев назад +1

    question: if you can mention where did you order the plates from if they were custom made ?

    • @ClickandThock
      @ClickandThock  9 месяцев назад

      These plates have been ordered from @Kbdfans

  • @tasm6300
    @tasm6300 8 месяцев назад +1

    what might quietest and loudest plates be??

    • @ClickandThock
      @ClickandThock  7 месяцев назад

      Good question, never tested that.. POM and PC really are more poppy so these are maybe the loudest, but I'm not sure!

  • @VyreYT
    @VyreYT 2 года назад +1

    PC plate the best for poppy sounds

  • @vincenteriksson4062
    @vincenteriksson4062 Год назад +1

    1:31 PC GMK
    1:51 Brass SA

  • @geonkr
    @geonkr Год назад +2

    Nice review

  • @mawsauce7786
    @mawsauce7786 2 года назад +3

    Any reason for not lubing the stabs?

    • @mawsauce7786
      @mawsauce7786 2 года назад

      Also a note for the future it says Gat Yellow still after you changed switch (3xcept for the first slide)

    • @ClickandThock
      @ClickandThock  2 года назад +1

      They are, and clipped and band-aid. But for some reason they are « loose « and they rattle, I’m aware of the problem! I completely change the stabs by now for new ones. But at the time I filmed the videos they were not!

    • @ClickandThock
      @ClickandThock  2 года назад

      @@mawsauce7786 OMG!! Good catch! Thanks!! My mistake!!!

  • @noahmcdowell1263
    @noahmcdowell1263 2 года назад +3

    Great comparison, your stabs hurt my ears though

    • @ClickandThock
      @ClickandThock  2 года назад

      Thanks! Yeah stabs are fixed by now!

  • @valgeradivan3926
    @valgeradivan3926 2 года назад +1

    awesome video.. subb

  • @Jun-mimimouto
    @Jun-mimimouto Год назад +2

    For some reason your videos sound way worse than they should regardless of good or bad stabs. I've tried multiple sources as well as listening to other videos on RUclips but I think it has to do with your audio bit rate. You might want to look into your video rendering and also compare your recording before/after rendering the video.

  • @zakkman
    @zakkman Год назад +2

    no clicky switches comparison... clicky gang disappointed ;(

  • @desine_
    @desine_ Год назад +1

    0:41
    1:33

  • @Julozon
    @Julozon Год назад +3

    What's the difference in feel between PC and aluminum? I'm talking about the speed bronzes.

    • @ClickandThock
      @ClickandThock  Год назад +2

      Aluminum will have a more solid feel but also a little more ‘ping’. Pc is more flexible, litle more bounce, but sound a little deeper.

    • @Julozon
      @Julozon Год назад +1

      @@ClickandThock Thank you!!

    • @Julozon
      @Julozon Год назад +1

      @@ClickandThock Also, is fr4 comparable to alu? They sound similar.

    • @ClickandThock
      @ClickandThock  Год назад +3

      @@Julozon FR4 have the best feel and sound in my opinion. It feel and sound more « thocky », deeper and less high pitch. Feel more solid than pc.

    • @Julozon
      @Julozon Год назад +1

      @@ClickandThock Ok, thanks

  • @edgarmatias
    @edgarmatias 2 года назад +6

    Really good test video. The Gateron switches sound so cheap… just plastic colliding with plastic. Kailh sound better but maybe too loud.
    Interestingly, changing the keycaps had a bigger impact on the sounds. I suspect the GMK caps may be hitting the top of the switch.

    • @ClickandThock
      @ClickandThock  2 года назад +3

      Youre right, this test also show the impact of keycaps in sound signature! And yes the GMK hits the top!

    • @edgarmatias
      @edgarmatias Год назад +2

      Thanks for the confirmation. Obviously the GMKs were not designed with quiet operation in mind.
      Anyway, thanks for posting the video - really well executed.

    • @ClickandThock
      @ClickandThock  Год назад +1

      @@edgarmatias Thanks mate! 😊

  • @tien969
    @tien969 2 года назад

    A litte late, how do u feel about the sound of clicky switches on carbon and brass, I'm consider to get 1 of those and not know which is better, thanks!

    • @ClickandThock
      @ClickandThock  2 года назад +1

      Never late! Brass feel more sturdy, it vibrate a little bit more and have a little metallic ping to it. But i feel more solid overall. Carbon have a deeper and smoother sound. i have mixed feeling on both. But I have to say that I love the fact that Brass add weight to my board, but that have nothing to do with sound...

    • @tien969
      @tien969 2 года назад +1

      @@ClickandThock thanks !

    • @prokopf-9332
      @prokopf-9332 7 месяцев назад

      @@ClickandThock Isnt carbon fibre super stiff? Like it doesnt really have any flex? Or do the flex cuts provide enough flex.

  • @XnoobsauceX
    @XnoobsauceX 2 года назад

    Beautiful

  • @supmotto
    @supmotto 2 года назад +1

    Why would you have different types of keycaps on different plates.
    Completely ruins the whole point of a sound comparison.

    • @ClickandThock
      @ClickandThock  2 года назад +18

      I don’t see the problem… 😅 you could just watch the cherry profil sound tests (which are back to back) or use the time code and jump to the SA keycaps sound test without watching the one you don’t want to watch…

    • @cspteja
      @cspteja 2 года назад +6

      @@ClickandThock there’s always one haha, good job.

    • @ClickandThock
      @ClickandThock  2 года назад +1

      @@cspteja 😂

    • @kenwoo3601
      @kenwoo3601 Год назад +2

      I just wanted to say thank you @click and Thock for the different comparisons. If they were all unique combinations that would be a different story. But the way you have done it here is great imo.
      For me personally as someone who is just starting out and trying to get a feel for this, the coverage for the different combinations here was REALLY REALLY great. The differences are very minor going from the materials that are right next to each other, but when you go to the extremes they are noticeable. Because you used different keycaps though compared to the singular keycap and switches setup so far, I could see how the effect will be better when the characteristics align more. For example, (Personal opinion) the SA keycaps make the deeper plates PC and POM sound nice cause they complement more than making them clash with a brass plate. Where as with the GMK keycap the PC and POM plates didnt seem to do as much.