How to make a Ford Ranger look AWESOME | 2.5" Leveling kit install + wheels & tires
HTML-код
- Опубликовано: 14 дек 2024
- Freddy shows you how to install a Rough Country 2.5" leveling kit on a 2019-2022 Ford Ranger, paired with some wheels and tires it totally transforms the look of the Ranger.
Get the leveling kit installed in this video here: amzn.to/37bpmrf
PMM store:
► www.amazon.com...
Tools that you NEED
►AWESOME Screw Drivers: amzn.to/2XnZuDv
►Amazing Electric Ratchet! amzn.to/3kb90mm
►POWER PROBE amzn.to/3lqoi6c
►OBD2 scanner amzn.to/2JLRCkE
►Welder: amzn.to/39dbM42
Automotive Products I HIGH recommend
►Turtle Wax Seal n Shine: amzn.to/32AEPtL
►194 LEDs amzn.to/2xXxNBu
► Dash Cam amzn.to/2JTrvIs
► / pmmods
► / poormanmods
Finally someone who really know how tonuse all the tools. Thank you mate!
Haha you're welcome 😆
Excellent Video. Thank you!
Make sure you get a front end alignment immediately when finished. If not it will destroy your tires.
What's the offset on those wheels?
Hello, my 2020 lariat cv came out...shitting myself 4 an hour, but grab the rotor and push hard while wiggling went in perfect!
Why not loosen LCA bolts and let the LCA swing down further to not have to press in/out the shock bolts? I assume an alignment is needed anyways. Press out the stock lower shock bolts and replace them with a similar hex head bolt you can easily slide in/out?
I think the way the control would move in an arch it wouldnt be easy getting those bolts to go into the control arm. But you could try that
What size tires did you have again? I’m trying to upgrade my stock Hankook Dynapro ATM
2 things:
1) Made the install harder than it had to be. Either use tow straps or a jack to keep things up. Hopefully you torqued things down to spec.
2) You put a spacer lift on a top of the line truck? Don't know if your friend bought it new or used but if he bought it used probably still paid a premium for the Lariat and FX4 package. Money on tires and wheels which aren't cheap just to put a cheap spacer leveling kit on it. Not sure why people are willing to put money into tires and wheels only to cheap out on the leveling kit. I could've done the same but decided on rather replacing the wheels I'd get the Ford Performance 2.0 Leveling kit. And I'm glad I did. Hopefully he replaced the rear shocks to. Those FX4 shocks really do suck. I have no idea what Ford was thinking when they did those shocks.
Awesome tutorial, did it effect the drive shaft angles at all just curios. I had a issue where ford had a tsb where I had to get my drive shaft, pinion angle shimmed to alleviate the vibration. Thanks for the video, looks amazing
Hey! Where are you guys located. Can you guys install it on my ranger?
What was the offset of these wheels? i want a fit close to flush with the fender. Not too wide where i would need fender flares
+25 same I have on my Ranger
how much do you charge for installation, my Ranger is 2019 2wd
Rough Country wooo. You did a better job than I did with my Tacoma 😂
😂😂 thanks buddy
and this costs...Hpw Much???
Hey poor man, would you by chance have any info on tuning QR25DE engines? Just found your balance shaft removal vid for the SE-R Sentra. I own an 05 Altima with the same engine and a decent list of performance modifications.
I had a performance shop tune mine with UpRev when I turbocharged it
@@PoorManMods I’ve been stuck between uprev and bully dog but everything is pointing towards uprev so I’ll look into that thank you man. Another thing, is the car still good with just cutting the chain and leaving the balance shafts and stuff in there?
Why do automakers make the front end lower. A whole 2.5 inches lower in the front that’s a lot. So dumb. Looks amazing with the Leveling kit and I love those rims and tires.
They do it so it's level when you put a load in the bed or hook up a trailer
Definitely remove the axle nut and sway bar end links and you won’t over extend the C.V axle and shouldn’t have to remove the lower studs on the strut to get them in with the spacer.
side note I don’t like the ride of the Ranger FX4’s (I went with a 21 Tremor) part of the issue is the OE FX4 dampers but it’s mostly that ultra stiff rear mono leaf I know it’s subjective but with the RC leveling kit ride probably just got worse IMO (looks good though for very little $) I probably would have went with the Fox 2.0 or 2.5 kit or something similar from king etc. It’ll definitely cost more than just the spacer kit but you get what you pay for 🤙
Thanks for your input!!
I also have a 21 Tremor, did you install a levelling kit? If so which one did you get?
Hahahaha that intro.
Hahahah
Now they're going to hire you again just to fire you
Hahahahah 🤣
Why don't you show how to lower the truck i am an older and short person
Just get a Maverick if you struggle to get in a mid-sized truck.
I lifted my truck but my phallus is still smaller than the lift kit. This is absolute bs.
Whaaat
13 mins... my guy better not say 4 hours lol, anyhow what was the actual time for install
Buy pre 1990 and that's all that's required
What?
Not worth lifting if you ain't going 6+ higher
What?