BMPCC 6K + TAMRON 24-70 2.8 G2 & 10-24 SAMPLE FOOTAGE
HTML-код
- Опубликовано: 24 сен 2024
- BRAW 8:1 converted to Prores
Gear used:
BMPCC 6K
amzn.to/3dyyyDH
Tamron 10-24mm G2
amzn.to/3dvcxWk
Tamron 24-70mm G2 (Tomb/ Lion/ Gate)
amzn.to/3blrFE4
Smallrig bmpcc Cage
amzn.to/35OsJQ3
Tilta bmpcc 6k Half Cage
amzn.to/2YPLpxb
SmallHD Focus 7"
amzn.to/2WlAiun
Product shots:
BMPCC 4K
amzn.to/35LxmKF
Canon 35mm IS
amzn.to/2Lj3taV
Olympus 12-100 f4
amzn.to/2SQhfWK
Yongnuo YN-360 RGB LED SABER
amzn.to/2Z25dh9
Turntable - Genie Syrp
amzn.to/3fxLFHf
Sony 24mm 1.4 G master
amzn.to/2YPEzrx
Sony A7r III
amzn.to/2SMQTFd
This video hard af
Wow thanks alot! I've literally searched all over to find sample footages with these lenses!
Maxwellectronics I’m glad it helped! Next Monday I’ll upload same test but with bmpcc4k + mb
Looking forward to seeing more of this. I subbed!!
Beautiful shots! I've read that there are issues with the bmpcc6k and the Tamron 24-70 g2 lens? Can you change the iris ? Does the VC work? I have the same Tamron lens but the bmpcc4k...
I've just uploaded same lenses with bmpcc4k. I had this combo for limited time but didnt notice any problems with IRIS or VC. Thanks for watching!
Hello friend tell me do you like this lens? How does the built-in stabilizer in TAMRON lens work with the Blackmagic 6K camera?
Hi! Dobry dzien! Maybe try to mount PB on gimbal rather than on camera. Also, try to set gimbal motor strength to lower. I had best results with mid-low for bmpcc, cage & 7” monitor with np-f batteries.
Mr. Julian Friend, thank you very much. 1. Tell me, where exactly did you place the external battery? 2. Where exactly did you place the external monitor? The fact is that I placed the monitor on CRAN 3s, and extended the wires to the left 👈 of the Blackmagic 6k camera. 3. Where exactly did you place the SSD drive?
Cергей Вернега I’ve used crane 3s accessories from smallrig - nato rail and accessories mount - look on their page. I mostly used cfast 2.0 card but t5 is to go on top / with smallrig mount for t5
Mr. Julian thanks 🙏 don't you use an external battery for the camera?
Cергей Вернега which one? There are at least 3 solutions I can think of.
Great stuff! I recently just bought the pocket 6k as well, have you tried the sigma 24-70 as well? I’m comparing that lens to this lens and was wondering if ones image is better than the other! If you had experience comparing them can you let us know? If not, no worries! Keep up the good work!
Nav G lenses are pretty similar. I would suggest to try both side by side in terms of operation because rings are working differently. I had sigma 24-70 and stabilization work pretty good until I banged that lens on the job. Than, even after service it didn’t work in video mode...
@@PanJulianTV good to know, thank you, appreciate the reply!
Hello Friend. I heard that the Crane 3s does not hold up to the Tamron 15-30 lens. True ? You tried ?
Is the lens IS working with this combo?
Hey! Yes - IS worked.
👍👍👍tell me, did you use an ND filter?
Yes! Tiffen ND 0.9
Mr. Julian seriously 😳? Does this happen? Is this the weakest that exists? Tell me, please, for what purposes? I use the Tamron 28-75, f / 2.8 lens for the same camera
@@very9000 To keep lower shutter speed and higher iris. In other words- to have control over image. 0.9 is 3 stops.
for example - 0.3 is 1 stop, 0.6 is 2 stops, 0.9 is 3 stops....
Mr. Julian thanks 🙏
Mr. Julian I have ND 16 (1.2) 4 stops (HOYA PROND)
Was pro mist used at all?
I had no promist on
Hey. Please tell me if your image stabilization and aperture switch are working? There are many reports on the internet that bmpcc6k and Tamron lenses are not compatible
Hi, it worked fine. I’m not using this setup anymore to show here any samples but if you’ll watch my other video - bmpcc test Wilanow it was shot on tamron. No problems that I can recall.
@@PanJulianTV youre not using this setup as in you replace the camera or lenses, and why? Im only interested in the Tamron for the image stabilization. Would you say that there Is a noticeable enough difference with the VC to buy it just for that? Thank you like the channel so far, hope you reply :)
@@ComproDesigns Hi! Thanks! For me VC / IS / OIS is important - especially with such lightweight cameras like bmpcc, as I do a lot of stuff hand held.
Hello Friend. I have a problem with Crane 3S. For 6 months now I can't solve the problem😌😌😌When you move forward or backward, does your video jerk? Maybe the power bank for the Blackmagic 6K camera should be placed at the top 👆? I have posted now at the top of the camera 🎥?
Have you ever used Crane 3s?
Cергей Вернега yes. Its my main Gimbal at the moment.
Mr. Julian ok can you help me for the money? For example, you can put on the same set: a cage, an SSD disk, a battery with a pad, attach an external monitor to the bottom of the Crane 3S 👇, like mine, balance it and tell me what I need to do to get it done?
@@very9000 I already sold my bmpcc’s :/
Mr. Julian Show a video of you moving forward or backward with the Crane 3S and Blackmagic 6k. Do you use additional post production software for stabilization?
Mr. Julian my e-mail: vernega1987@mail.ru, my WhatsApp: +79241818690 Sergei