How To Replace Front Wheel Bearings Rotors & Brake Pads On 97-2003 2WD Ford F-150 Expedition RWD 2x4
HTML-код
- Опубликовано: 30 июн 2019
- #fordf150 #2wd #frontbrakes
Good working hub bearings and brakes are a vital when it comes to towing and your safety. In this Short video I tell a story how I remove and replace front hubs, rotors, brake pads and grease new wheel bearings in my ford vehicle. Also what to look for when making this repair. I hope you enjoy.. Thanks for watching! And if you haven't yet subscribed, DO IT!! Also hit the bell for awesome notifications.
Buy brake kit here:
amzn.to/3hKNdQ5
www.amazon.com/shop/atemoffroad
98-2003 Ford F-150 2WD RWD Replacing Front Spindle Hubs Bearings Rotors & Disk Brakes How To Install 98-2003 Ford F-150 2WD RWD Replacing Front Hubs Bearings Rotors & Disk Brakes How To Install
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission. 
Хобби
Just wanted to say thanks for this video--just did this on my truck today and followed along step by step. No more bad bearing hum/grinding noise! Also thanks for keepin it chill and not screaming at us. You're a good teacher.
Thanks for watching I appreciate 🍻 in a couple days your going to want to Jack up a wheel and double check there is no play in the rotor side to side. If there is adjust spindle nut in to the next hole the cotter pin wil fit through both the castle cover and nut! Then check again until no play 🍻 I always check this before I put the wheel on regardless of the torque procedure. That check checks the torque procedure was done correctly! not sure if I remember mentioning it ! Again thank you
@@ATEMOFFROAD oh awesome--thanks for the follow up! Will definitely check that in a couple days...cheers!
I'm just dropping a comment here..I get on RUclips and watch videos on what people are doing. I work on and build my own engines and vehicles/hotrods. Just wanted to say this video is on of the best I've seen on the subject.
Thanks for watching I appreciate it 🍻
I’ve been sitting here 3 days wondering why I can’t find a wheel hub assembly for my RWD Expedition. It doesn’t have one! Now I know the parts I’m looking for and most importantly , a fine example of how to get the job done . I just got the 5.4 truck with 100xxx miles on the dash and 200 miles on the fresh transmission. Now she’ll be back on the road and ready for work. Thanks a million!
Glad to help , thanks for watching 🍻
thank you! that was perfect. no wasted time with commentary - direct and to the point
Thanks for watching 🍻
Thank you for this video. Had no problems fixing my truck after watching it. Your video should be the standard on how to make an instructional video.
Thank you 🍻
I am officially impressed - this is one of the best, most detailed how-to vids for the F-150 ever. Thank you!!
Agent 86 Maxwell Smart thank you i appreciate it! Cheers
Have a 2008 Expedition, watched this to get re educated before i started just to refresh my mind. Good video
Thanks for watching 🍻
Thanks guy. Saved my ass with the torque specs. forgot the chiltons 30 miles away at home and tore apart the bearing. wasn't about to ruin my new parts by risking the trip either.
Sweet, those specs came from the Haynes book, if specs are fallowed and the rotor doesn’t feel loose or have end play after , should be good to go! Thanks for watching! Cheers
This is the kind of dude you want to buy a used car from…he knows how to take care of his whip. I’ve been doing brakes for years..apparently, I take a lot of short cuts.
You saved my bacon today. All the other yohtube videos showed a different brake setup. Thanks for your effort!
Thank you 🍻
I'm very impressed, Video is so detailed with step by step instructions, The way he goes about this process eases my concerns that YES I can totally complete this job!! Thanks for the crash course on this.
Thanks for watching
Best video for this. My son and I just finished mine. We referenced this video several times.
Best thorough cut the BS video out there for the f150 2wd brake job. Great vid man!!
Thank you 🍻
I've used RUclips videos for several vehicles for several years. This is the best auto repair vehicle that I've seen. Great job
Very cool, thanks for watching! I appreciate it!
This is the best how to video I have ever seen on RUclips on any subject!
Thank you I appreciate it 🍻
Thank you. Detailed, yet concise. Perfect.
Nice, I appreciate it!
Excellent instructions, just finished doing this and everything in this video was spot on. Made me feel like I knew what I was doing. Thank you!!
Thanks for watching I appreciate it
Excellent DIY video, a lot of details, good explanations step by step, thank you very much!!!!!
Thanks for showing me how to do this work--Really appreciate the time you invested !
James Bond 💥 nice , thanks for watching
Much appreciated the video - great procedure, torque values included. Everything proper.
Zoltan Bako glad I could help , I never thought this video would take of like it did, thanks for watching
Excellent video! One of the most detailed, step by step, tutorials I've seen.
💥 nice, thank you for watching
Great video. Very detailed step by step instructions. Thank you.
Best Video ever about F-150
Thank You for sharing your knowledge.
My F150 is 2003 with 215,000 miles and still running great.
💪🏼💪🏼 thanks for watching 🍻
Really great, detailed, and thorough video. Thanks.
Thank you. All done. Perfect with your help. Saved $165 towards new evil gun.
Thats awesome, thanks for watching 🍻
Perfectly explained. Great video
This is one of the best how to videos i have seen , Thank You
Glenn Will thanks
Exactly what I needed to see. Did exactly what you did step for step and worked out great. Thanks for the knowledge
Awesome, thanks for watching
Thank you for this video, my truck needs this job done and had a mechanic take a look and the price was super high. Unfortunately don’t have the money to have the expert do it but feel so confident now after watching your video and I will do it myself. Thank you
Thanks for watching I appreciate it 🍻
Best I’ve seen and you do everything the “easy” way.
Thank you for watching, I appreciate it! 🍻
I've seen 1 or 2 fake it till you make it DIY instructionals that halfass information but this is nice, detailed, accurate and well done. Great content dude. Keep making repairs great .
The Backwoods Mechanic boom 💥 thanks buddy, I appreciate it! I subbed to you!! Sub back👍🏼🤙
Best tutorial I've ever seen! God Bless you for making videos like this. It's material like this that gives people hope and the confidence to step outside their comfort zone and try a new challenge! Thanks again ❤
Thanks for watching I appreciate it 🍻
Great video, thank you so much!!! Following this step by step!
Thanks for showing. Especially the attention to detail. Had to get re-familiar on this. Since I’ll be doing this soon. Great work.
Thanks for watching I appreciate it!
One of the best detailed videos I’ve ever seen.
Thanks 🍻
One of the best made videos on this subject. Well done!
Subscribed!
@Rag Tie 💥 nice, thank you I really appreciate it! Cheers
Wow! I really do appreciate you taking the time to do an excellent tutorial of replacing the from brakes pads and rotors.... I am doing this job on my sisters truck and I was hoping it was 4X4 cause it’s a bit easier .... you just take off the caliper bracket to get the rotor off the hub stays on!!! Lol.... not doing a wheel bearing replacement😳!! But it’s kool .... I’m a Chinook Mechanic and it brought back the old days of doing wheel bearings grease jobs on them after water landing when we extract and retrieve Special Ops guys!! Again thanks a lot of your excellent video man!! Take Care!! 😊
DaMon Edwards Thank you for your service.
Great job at explaining how to properly do the job. I would RECCOMEND this guy. Add more videos for us please and thank you.
💥 Thank you and for watching, I appreciate it! cheers
Fantastic. Very thurough and clear!
ND FL 💥 nice , thank you I appreciate it
Outstanding video, well done.
Great video!
So well done step by step
Best video! Not sure if I'm going to do this myself now that I see all the extra work the front captured rotors require.
Thanks for watching
Great video, I like how you laid out the tools and parts in the beginning.
Thanks for watching 🍻
The guy at auto zone told me that I had everything and I still hear scratching. Come to find out my rotor was wobbling down the road because he didn’t give or mention anything about a back wheel bearing so now brand new breaks and rotors on 2 front wheels are completely done for after a couple days of driving. Thank you for the detailed video will do every step this time.
Oh man well when you get it going , after the main nut is torqued, just make sure there is no play side to side in the rotors before you put the brakes back on. 🍻
Absolutely outstanding video. Thank you.
Thanks for watching 🍻
This was amazing forst time doing both assembly now I'll know for ever thanks 😊
🙏🙇🙏Many thanks...This process is the same and also very necessary for a 98 Expedition..Something i found out the hard way!🤦
Glad you found it useful, thanks for watching
Thanks for sharing the video. Greetings from 🇧🇿
Nice, thanks for watching
Nice job. Great instructions.
Thank you 🍻
Long time diesel/industrial/jeep mechanic here, and I don't need this video, but I approve of it! Lol
I am walking someone through this on the other side of the country, and I needed a good video to walk them through it, and this is perfect, well explained, and very simple to understand.
The only thing I would do differently is adding grease on the inner seal land on the spindle (you added it to the seal itself which is just about as good, but I do both so it has complete protection, rust protection as well), and I save the brake clean on the rotor step until it's installed, to get my greasy fingerprints off it lol
I would also remove the caliper prior to taking the bracket bolts out, to avoid a dynamic removal of the bracket as seen in the video ;)
But that said, if you do this EXACTLY as you show, it works!
Thank you.
Thanks I really appreciate it! I change up how I do things all the time, definitely brake clean on the rotors at the end, and I was hoping to pull everything apart at the same time which it just didn’t happen the way I wanted to film it! I think they just fell out of my hands, I do always do pull the piston caliper before the support bracket first! Also I did finally spend the money on a nice bearing packer, definitely beats manual hand packing, some things I would do differently if I Re do this video, thanks for watching! Cheers!
+++++++ i literally do not get it how anybody could give this guy a thumbs-down! this is the best video I have watched very detailed oriented and very explanatory and he does it cleanly too!:)
Thanks for the video bro right on...
Thanks for watching and the kind words 🍻
Thank you. Seems like all the other videos are for 4WD. Nice job. U helped me.
Thanks for watching!
Great video thank you helped a lot !!
I have to admit I watched about a half a dozen videos before I found this one. I'm so glad I found it man thank you very much. 😁✌️ I saw one where a guy was standing on his breaker bar to set the bearings!!
Thanks for watching 🍻
@@ATEMOFFROAD no thank you. I had a hard time setting the bearings, your advice made it simple for me to get it done right the first time. I had to buy another set of seals after watching other videos so you sort of saved my butt. 😁✌️
EXCELLENT JOB, THANKS
Great vid thanks
You saved my ass bro, thanks for the PERFECT video!
Thanks for watching 🍻
Well explained!
Step by step.
Keep it up bud!
Thanks for watching
Good job! I think this is only one of two videos on you tube showing the front 2wd drive bearing replacements. This one is alot more thorough!
Thanks for watching
Thanks for the vid man, saved my bacon a little today. Rock on.
Scotty J 💥 nice , thanks for watching, cheers!
Gracias por compartir el video excelente! De mucha ayuda 🖐 saludos desde 🇱🇷 USA
Amazing great step by step all the way keep it up
Rod Eslava nice , thanks for watching
Your voice made me feel compelled to buy a torque wrench.
It sounds weird I know but i should be getting my torque wrench on monday and then I'll give this a try. Wish me luck!
I also believe you gave the most detailed explanation on how to do something than any other video I've ever seen. Thank you
eddie947 nice , I appreciate it !! Cheers
Thank you for this video
Cheers buddy!!
Thanks brother ... Got me threw the job in a pinch... 👏
Thanks for watching I appreciate it 🍻
Incredible video it was very very helpful for the job I had to do.
Thanks for watching buddy 🍻
Great job! Very detailed! Seat is one of your favorite words haha
Thanks for watching
Well done 👍
Thank you!
Thanks for watching 🍻
Excellent and detailed video good jobs, now I can do mines
Thanks for watching
Great video very informative thanks enjoy your day 😉
Thanks for watching
Good job dude !!! Some guys say I'm kinda' critical 🙄 but I'm very impressed with everything you did, on this brake job !!! Very nice!
Thanks for watching buddy I appreciate it 🍻
A dab'll not do you 😄😄 that's funny. Thanks for the video.. I actually learned something and I love that
Thanks for watching I appreciate it 🍻
Well explained!
💥 nice, Thanks for watching
You’re a legend.
Thanks for watching 🍻
Great video
Pound4poundbeast , thanks for watching
Very good video. Very helpful tt
James Jenkins thank you
Very detailed work keep it going👍
Editing awesome as well
Thank you for watching I appreciate it 🍻
Great guide 👍
Thanks for watching 🍻
Excellent tutorial, well thought out, along with exceptional teaching principles. Thanks for your time that you invested in this video, as these instructional videos truly do help.
Now to put your lesson into action, as I will be replacing same exact components. 👍👏
Thank you for watching
My man is like the Bob Ross of mechanics
Haha that’s a good one, thanks for watching buddy 🍻
great vid!! thanks!!!!
Thanks for watching
thanks dude
Thank you 🍻
Not how I learned to pack a Wheel bearing. The way he showed seems to work but I was taught to scrape the bearing in the palm of my hand in the grease and force it into the bearings. You also do what he does. There is also a bearing grease gun attachment.
Nice job.
TJ Minispeeder Phillip thanks
Thanks!
That’s you so much I really appreciate it 🍻
Awesome video highly recommend a bearing packer the hand way is how I did mine last time and was humming 15,000 miles later.
I have one . But most people don’t , definitely a good investment! Thanks for watching 🍻
Saved my life man
Kyle Johnson 💥 nice , glad I could help! Cheers!
@@ATEMOFFROAD Sent some $$ on paypal! You saved me like $400
Kyle Johnson 💥 wow thanks man , I appreciate it, your kindness just made my day! Cheers!
Best video ever hands down. Thanks so much for the video. Fixing your vehicle should never be complicated if doesn't have to be. Love that I was easily able to follow along.
Thanks for watching I appreciate it 🍻
thank you soo much good sir
Thanks for watching
I think you should consider becoming a surgeon. I'm serious. You are way more methodical than to just be an auto mechanic. Thanks, great video.
Thanks for watching I appreciate it 🍻
Appreciate it brother ! Should help me replace all brake for 03 lightning
Thank you for an excellent video tutorial. Watched several and then completed my job with ease using your guidance. Thanks again!!! Best example online.
Thanks for watching
@@ATEMOFFROAD What aborto if i don't have torque to do (12ft and 30ft) ?
Alternative lifestyle pliers.
Very detailed only concern would be that he reused the cotter pin
Still going strong 💪🏼 50k on brakes no problems 🍻
Saludos, muy bueno el vídeo no hablo inglés pero se ve como explica paso a paso.
🍻
I already miss my chevy lmao. Holy shit ford!
Excellent video. Clear step by step. Including part numbers. Thank you............
💥 nice, thanks for watching, I appreciate it!
Good job body,