How To Replace Throttle Body 2006-2012 Toyota RAV4
HTML-код
- Опубликовано: 4 фев 2025
- Buy Now!
New Throttle Body Assembly from 1AAuto.com trq.video/ia-1...
Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly. This video shows you how to install a new, engineered to fit TRQ throttle body on your 2006-2012 Toyota RAV4.
• Check here for more videos on the 2006-12 Toyota RAV4: • Toyota RAV4 2006-12 3r...
This repair was done on a 2006 Toyota Rav4 Limited 2.4L and the process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• Pocket Screwdriver
• 10mm Wrench trq.video/otU-...
• 12mm Socket trq.video/oab2...
• 8mm Socket trq.video/o3v-...
• Trim Tool Set trq.video/oyf-...
• Needle nose pliers trq.video/omw-...
• Needle nose pliers trq.video/omw-...
• Pliers
• Ratchet trq.video/oaiK...
• Socket Driver
• Socket Extensions trq.video/oab2...
• Torque Wrench trq.video/oMc-...
• Paper Towels trq.video/omI-...
Subscribe: / @trq
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: • Toyota RAV4 2006-12 3r...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thank you very much!
This is the best video I found to service the throttle body. Clear camera angles showing the important steps. I appreciate your effort uploading this video.
Was your cars rpms fluctuating and car jumping with the check engine light on and not going in reverse right and jumping when going in reverse too
One hint when dealing with coolant lines on any throttle body always take the top coolant hose off first to eliminate excess coolant loss. If you detach the lower coolant line first you will get a steady flow of coolant running through the lower tube. I also attach coolant line pinching pliers to each coolant line to stop coolant from leaking.
Beautiful work! One q. for you: If I'm removing my throttle body for servicing, then reinstalling my old throttle body, can I reuse my gasket, or am I supposed to use a new gasket in that case, too? Thanks for posting. Big help!
Thanks for doing this video
What about on the Camry solara . The bottom line is the tank vacuum surge?
Hi,
Your video is very detailed.
I need help. What is the vacuum/vent hoses size for the third/fourth connector on throttle body?
2003 Camry 2.4L LE, Engine 2AZ-FE . I couldn't find aywhere that shows size. Thanks
Is this the same as doing a 2012 camry throttle?
Well done video thanks
❤❤Love the show but why change it. Most of them last for a lifetime 😊
Will this fit on 07 camry?
i bought a throttle body for my toyota camry 2005 and it only had 3 pipes....now i know i can just omit that line and plug it at the manifold too correct? same omission for 2005 camry? 2.4L?
Where comes the vacum line from the throttle ? I can see it on the intake ?
What’s kind of problem that you need a new throttle body?
Be advised, whoever made the video they never showed you which you he, or she plugged up the throttle body
the wire connected going back to the throttle body?