Restoration of filmstrip F 5
HTML-код
- Опубликовано: 1 окт 2024
- In this video, I will restore the old filmoscope. For painting, I used powder paint, it is more wear-resistant and durable than usual. I also completely dismantled the transformer, replaced some parts and filled it with varnish using a vacuum unit. Chrome was restored with thermochromic varnish, I really like this method, it is simple, and the result is excellent.
I want to thank you for viewing my restorations. If you liked this video please like and subscribe.
Thank you viewer!
#restoration #restore #rusty
Ох как олдскулы свело, сколько мы с отцом этих диафильмов в своё время пересмотрели 🥲
Хорошее видео, так держать. Некоторым листовым деталям не хватает слесарки, фасочку снять, заусенцы убрать, плоскость рихтануть, глубокие каверны зашпаклевать. Отдельно по пайке: слишком мало греешь, спай остается "холодным", нужно дождаться пока припой не станет жидким и глянцевым, будет и гораздо надежнее и визуально такая пайка выглядит сильно лучше.
Да с пайкой не очень получилось, надо было убрать весь старый припой и использовать новый, следующий раз так буду делать
Да-да, задрочить изделие напильником до усёра, заполировать всё накуй, как вы ща любите, замазать всё шпатлёвкой (где надо и где нах не надо), заипенить всё в "золото", чтобы "дорого-богато" выглядело и обозвать этот процесс "реставрацией".
По мне чел реально, в отличие от пришибленных банкой полироли, без выипонов и новомодных изысков отремонтировал устройство, представил его в рабочее состояние - максимально сохранив оригинальный вид. Вообщем, отремонтировал - не превратив оригинал в "пушистого Иисуса".
У меня до сих пор такой дома стоит . Работает . И пленки старые : " Нильс, с дикими гусями", "Медведь и пряничная избушка", " Вовка в тридевятом царстве"... и много других. Это модель фильмоскопа Ф-49, город Минск. В процессе работы корпус сильно нагревается , поэтому по богам есть "жабры", а на ощупь он шершавый такой . Не было на нем глянцевого покрытия. У них 2 цвета было темно-серый и черный, кстати в том месте, куда изначально закладывается пленка ( 18:27 ) внутри была приклеена бархатная тряпочка, чтобы пленка лежала как в мягком "ложе" и не царапалась . Кроме того при выкручивании пленки в объективе не видно было пылинок и соринок - они оставались на этой бархатной тряпочке . Все продумано )))) У вас ее нет в модели. Видимо, она была утрачена за годы.
Good job! Great video, keep it up. What a master! Thank you for your great work. It turned out great! And I like heat plating, I rarely see such technique. screws I usually dip them in and take them out.
Thank you! Prefer
ДИАФИЛЬМ 🥹
мечта детства
I have never seen a transformer being restored, thank you for showing us. But you soldering job is horrible, when messing with decades old solder only way to do that is removing all of the old solder with a desoldering pump and completely reflowing it.
Yes, you're right, I'll do it next time
I was thinking the same thing. My ex used to repair musical equipment and his desoldering machine was always in use. Cold solder joints were the biggest issues in amplifiers, causing intermittent problems.
That thermochrome product is amazing. What company makes it, I can’t find anything like it. The detail you go to n your restorations are absolutely fantastic 😊
@TUSIP Your constructive criticism is quite rude. There's other polite ways to show your disapproval.
بيسيل@@PSVRestoration
I absolutely 💯 %❤ this is remarkable! You have the best workshop! So perfect I learn so much watching! Thankyou so much!
Thanks
Аааа! У бабушки где-то пластиковый лежит. Я уже и забыл про начальные кадры
Es impresionante ‼️👏🏻👏🏻👏🏻
Это очень круто!!! Детство вспомнилось))
Yay we finally got a face reveal 2:34 🎉🎉🎉🎉
did you really use a rusty spring and two worn out gaskets at 11:20? This is terrible for restoration.
Is this filmstrip projector a Russian or Soviet model? I ask because of the Cyrillic "F" on the cover.
This is a Soviet filmstrip, somewhere in the 60s
Brilliance just Brilliance
Super jest te cały rzutnik stary zabytkowy odrestaurowany pozdrawiam serdecznie 👍👍👍👍
Podziękowanie
Класс! Очень круто получилось! И мне понравилось термохромирование, редко встречаю такую технику.
Спасибо! Лайк, подписка
Спасибо
Получил эстетическое удовольствие! Мастер подходит к делу приятно основательно и с осознанием дела👍
В детстве точно такой же аппарат был😊
Красавчик! За линзу и пескоструй в стакане отдельное спасибо!
Обожаю смотреть как старые вещи реставрируют
So that's how they repaired the Titan Camera Man... oh, wrong channel...
I like that Thermochromic paint. Where did you get it from? Powder coating is so superior to other paints in my opinion... Also do you think the powder varnish was actually worth it? I mean I couldn't see any differences before and after you used that finish. Thumbs Up!
Powder varnish makes the surface more glossy and hides some irregularities. I buy thermochromic varnish, it is sold, I love it, this is the easiest way to chrome.
Where do you buy that thermochemical lacquer I would love to get me a bottle
Hello. It is sold in Russia
👏👏👏👏👏👏👏💯💯💯👍👌🇧🇷🇧🇷
Just like new!
Full watch. Your work is great .
Great finish .
Awesome
Thanks
That transformer looks like total overkill. You could drive a guitar amp with it!
Personally I would have replaced the old transformer and bulb with an LED.
Low voltage and a lot safer than that manky old winding.
I know he did a continuity test and possibly a resistance test but I still would rather replace the guts.
✌️❤️🇬🇧
Is not a good idea remove passivation on magnetic sheet, if you know about leakage flux.
They have to be distanced each-other with some paint (or minimum thickness insulating paper), or efficiency ratio of transformer reduces a lot (and reliability too)!
I seriously thought that when you opened the casing, a moth was going to fly out
Strange how the inside was as rusty as the outside.
Damn. I haven’t seen one of these in a million years.
now you 've seen
The MCU should just hit the reset button. And start with characters that people actually care about. The xmen and the fantastic 4 and them bring Doom into as the big main bad guy.
Beautiful craftsmanship! Thank you for sharing this!
Thank you for your support and comments)
Ты бы хоть грязь в ванне сменил в которой предварительно замачиваешь все что на реставрацию.
Fantastic job! Never heard of thermochome varnish, what is it and where did you find it?
It is made by one master, it is easy to apply and gives an excellent mirror
Russian masters are great!
Thanks
❣️
Incredible work. Where do you get the thermochrome varnish?
Thank you. I buy it in Russia
Монтаж классный
Спасибо
Hooray: I was definitely looking for this educational video. It will never corrupt my mind. Listen and watch something that protects your mind. Something that's productive. Something that's worth listening and watching. Furthermore: It's something that's from right out of the blue. ✅️ ↔️ 👉 🔛 ➡️ 🤜 ✅️ 😌 👌 ✨️ ☺️ 🙌 💪 😌
merubah cara berfikir yang bagus ❤❤❤
Are you sure the varnisch did fully cover the plates of the core on the spots where they touch?
I think yes
Ficou lindo
Thanks
У меня такой был! Отлично обновил! Просто суппер!
Спасибо
Very cool this powder paint!
Thanks
Nice job
Thanks
Absolutely amazing
Thanks
4:32 would love if you included some subtitles to tell the audience what’s going on! I’m sure that some kind of a motor you’re holding in your hand, but what are all the little pieces of metal for and why is it constructed like that? ❤❤
Done 1k like
Excellent work on the transformer!!...that projector is better than new now!!
Thanks
Me encanta ver cómo mezclas productos para quitar el óxido y después salen las piezas limpias ,se que es química pero parece magia alquimica jajajaja
Шик с детства и нечего страшного всё равно интересно было. Хорошо рестав. много полезного. 😊
Спасибо
Патрон зачем красить? Надо было оцинковать. Или меднить. Гальванить, короче.
Amazing what a skills
Без пескоструя ремонт был бы невозможен! Можно было заменить трансформатор на мини-лампочку 15Ватт 220Вольт(как в холодильнике), но без очистки ржавчины ремонт бы не получился.
Советский, помню такой. Нам в 70-ых в детском садике заменял Диснея и СоюзМультфильм :) Первый домашний кинотеатр. За сохранение такого раритета лайк"! У меня сохранились пару (мульт)фильмов, может посмотрим, вспомним детство? :)
Супер!!!Всё сделано чётко и искусно!!!Браво!!!
Спасибо, я старался
Excelente trabajo 👏🏻👏🏻👏🏻👏🏻
Thanks
Эх,сколько диафильмов просмотрено на таком агрегате в детстве.
中-5とは?🇯🇵
Beautiful job, well done!
Thanks
lacquer Thermochrome donde lo compro por favor
What a great Job. 👍
Thanks
😊😊😊.
Скажите, а почему нет субтитров на русском?
А почему вы решили что они должны быть именно на русском
@@PSVRestoration потому что вы пишите на русском) просто интересно, какой химией вы пользуетесь)
nice work man
Thanks
ЕШки)))
Almost looks new again and you did an excellent job restoring it!!!!
I enjoyed your video and I gave it a Thumbs Up
Thanks
Отличная работа 👍
Спасибо
Здорово😊
Спасибо
Просто потрясающе! Какой мастер! Спасибо за проделанную работу!👏👏👏
Such a beautiful restoration. Keep up the great work 👍👍
Thank you, I will try my best
Definitely not 4k.
Why did you decide that this video should be in 4k
Parabéns pelo trabalho ficou ótimo
Obrigado
2:37 face reveal xDD
Quand je vois des gants pour bricoler ... J'arrête tout de suite la vidéo !!!! Cinéma !!!👎👎👎
Et que je devrais travailler sans gants
Fake
Англичанин. Сцыш на родном писать
Почему вы так решили
@@PSVRestorationпотому что он тролль, бесполезный, не обращайте внимания...
@@mitkasan8915 Да я особо не обращаю на таких
*Try next time, not to use gloves, maybe something useful will come out, gloves are for women*
Excellent work on the transformer!!
Thanks