For your batteries, try cleaning all the grime off and buffing out your terminals. Saved my batteries. If you buy a new battery, look into lithium ion.
I also have the CTS3 Insight as I only needed a Monitor and not a tuner. I use the SCT X4 to tune my truck. If I didn't already have the SCT X4 I would have gone with the CTS3 Evo which allows tunes as I love the Insight. Installing a pyrometer next week. Plus the tunes I have cannot be gotten anymore unless you find the secret portal to the past, lol.
I run race me ultra and it has been running really good for me so far. Think that they have come a long way with quality aftermarket tuners. Great video as always Cam. Keep up the great content!
>ve read so much that people love the cts2 for its reliability whereas the cts 3 having lots of issues. but those posts are 1-2 yrs old. What's your opinion now after a yr?
You have the 5.9 Cummins? I feel like my tranny shifts horrible now with this unit, slow shifts like when I floor it it takes ages to catch gear, I feel like I can’t floor my truck and take off like it should. I have to wait to be in 3-4 gear to do that, worries me, was told edge is a tranny killer and to run smarty’s
Aye brotha, I know this truck is long gone.. but did it delete all the codes with the 5” straight pipe? They clearly won’t say yes online so just curious because I’m doing EGR delete and straight pipe and am gonna do this cts3 evolution
Have they made improvements to the cts-3 over the original version? Your video is about the most recent video I've been able to find but everything from a year ago and later have spoken of the cts-3 as a giant waste of money because of its glitches??? I have a CTS2 and other than it being laggy I've had zero issues with it but I need another monitor for a newer truck and the cts2 is no longer available
cts3 has had multiple updates and it works just as good as the cts2, plus it is updateable via wifi which is convenient. still use mine. i have a video installing it and doing a walk through of it.
@@EVERYTHANGDIESEL thank you! I've had my installed for about 2 weeks now with no issues, I called edge customer support and they walk me through how to download the updater to my computer and then plug the monitor into my computer and update it that way, they said that was the best way, seems to be running fairly streamlined, couple issues I have noticed which has been spoken of is when using remote start and you go to power cycle the truck (put key in or actually turn truck on) the monitor doesn't like it sometimes, you have to turn the truck off and then back on to get the monitor to power up properly, and if you wait too long on the select PID screen sometimes it can freeze, but as long as you just start the truck and drive or don't dilly-dally trying to select things and let the screen sit for a while, it has seemed to operate flawlessly
Since u have the CTS 3 insight an running the compound turbo kit how's the horsepower rating and u have the 5 level switch in your truck do u use it to for your tuber
i just put this in my Ford 6.0.. does the dam thing do a tune on the fly.. like change from tow econ mode to tow mode and such.. or do you have to stop , and change it.. mine makes me stop and shut truck off, then do the changes with cycling the key on and off.
so we have a computer tablet laptop we so call phone than the multi media system and than this information center yeah know I understand depends on computers ^ _ ^ 2016 corsa edition does t have a lot/oooh tomtom device check updates.later
EVERYTHANG DIESEL I have the same one, but it goes off whenever there’s no cop in sight and i hate when it goes off because it’s annoying, does yours do that?
Just got mine today, I'm glad I found your channel.
Love mine and love watching you build your truck. Keep up the great work brother
For your batteries, try cleaning all the grime off and buffing out your terminals. Saved my batteries. If you buy a new battery, look into lithium ion.
I also have the CTS3 Insight as I only needed a Monitor and not a tuner. I use the SCT X4 to tune my truck. If I didn't already have the SCT X4 I would have gone with the CTS3 Evo which allows tunes as I love the Insight. Installing a pyrometer next week. Plus the tunes I have cannot be gotten anymore unless you find the secret portal to the past, lol.
I run race me ultra and it has been running really good for me so far. Think that they have come a long way with quality aftermarket tuners. Great video as always Cam. Keep up the great content!
Thats another good tuner too!
Been here since about 2,000 subs big dog!
Appreciate you man!!
Correct me if I’m wrong, the CTS3 doesn’t have MPG monitoring like the CTS2.
I’d like to know this too
Just ordered mine! So excited for it!
I'm a Texan, I use the metric system. 9mm, 10mm, 5.56mm, 7.62mm x54r :P :P :P
Thanks for this Vid, Bro. I am looking very hard at that CTS 3
I think you'll like it man
>ve read so much that people love the cts2 for its reliability whereas the cts 3 having lots of issues. but those posts are 1-2 yrs old. What's your opinion now after a yr?
Awesome! So much faster than the ct2 👍🏻
Facts bro!
Installed the pillar mount for monitor. Such a clean look.
Yea it is!
As always great content big dog!!!
Thank u bro!!
I just ordered one, haven't installed it yet. My buddy said I wasted my money, I should've got an ez lynk
You have the 5.9 Cummins? I feel like my tranny shifts horrible now with this unit, slow shifts like when I floor it it takes ages to catch gear, I feel like I can’t floor my truck and take off like it should. I have to wait to be in 3-4 gear to do that, worries me, was told edge is a tranny killer and to run smarty’s
Hi thanks for the video!
Does it show you gears as its shifting?
As soon as I saw yours boot up so fast, I thought about upgrading.......for......a minute or two.
I wish Edge would take trade-ins.
I believe they have a trade in program going on rn. They did whn they initially released it
Do you have any problems with the suction in the heat? I have the 2 and it constantly falls off during the summer
Not on this, just lick the cup and stick it. It will hold. Also clean your glass
I found mine to overheat on the dash board and freezes up. Every other start up its a black screen. Unplug it and back in to reset.
U might have to do a update on it. I had to send my 1st one in cause the screen went unresponsive
Mine was showing my boost until I updated the firmware today. Have you had this issue?
Just bought the CTS3 Evolution tuner. How do i tune my truck for HP and torque? I tried all the tunes it came with, but my 5.3 feels the same
Dont tbink kts for gas.
Aye brotha, I know this truck is long gone.. but did it delete all the codes with the 5” straight pipe? They clearly won’t say yes online so just curious because I’m doing EGR delete and straight pipe and am gonna do this cts3 evolution
How did it go?
Have they made improvements to the cts-3 over the original version? Your video is about the most recent video I've been able to find but everything from a year ago and later have spoken of the cts-3 as a giant waste of money because of its glitches??? I have a CTS2 and other than it being laggy I've had zero issues with it but I need another monitor for a newer truck and the cts2 is no longer available
cts3 has had multiple updates and it works just as good as the cts2, plus it is updateable via wifi which is convenient. still use mine. i have a video installing it and doing a walk through of it.
@@EVERYTHANGDIESEL thank you! I've had my installed for about 2 weeks now with no issues, I called edge customer support and they walk me through how to download the updater to my computer and then plug the monitor into my computer and update it that way, they said that was the best way, seems to be running fairly streamlined, couple issues I have noticed which has been spoken of is when using remote start and you go to power cycle the truck (put key in or actually turn truck on) the monitor doesn't like it sometimes, you have to turn the truck off and then back on to get the monitor to power up properly, and if you wait too long on the select PID screen sometimes it can freeze, but as long as you just start the truck and drive or don't dilly-dally trying to select things and let the screen sit for a while, it has seemed to operate flawlessly
Since u have the CTS 3 insight an running the compound turbo kit how's the horsepower rating and u have the 5 level switch in your truck do u use it to for your tuber
I haven't dynoed the truck since doing the compounds. I ride on level 5 every now and then
How do i take the edge CTS3 and return to stock tune?
Will this work on a 98 Dodge Ram 2500 5.9 12 valve ?
Was debating on this or the banks unit. Thanks for the help. Keep it up
I would get this over the banks one all day
7:13 that was a cool sound...
How did you get the gear and TCL I can’t find it on mine. Same truck as yours!
I updated the unit and it showed up
Thats why I love my edge I still even have a cts2 I just plug in to laptop and update...
Does that have the tuning built in???
No just monitor, the tuner built in is the edge juice
Wow I'm way behind. Are you using that just for monitoring?
Yessir just a monitor! So u can see all your parameters I use efi live or tuning
Looks like a nice device.
Pretty neat man!
Is this an actual tuner or gauges?
The insight is just a monitor. However when you update it you can get the option to pay to upgrade it to the evolution which is a tuner.
Yo what power level do you run the truck on? Also how much hp is the tuner for?
Tune 4 and that is not a tuner it's just a monitor
Thanks man. Amazing videos
I’ll be picking one up sooner than later.
Do you think the low voltage may have killed it?
Naw i believe it was a defective unit
Can you adjust trans pressure
Not on that no
Does it have maintenance manager like the cts2
Yes it does
How do you check the injector rates on the cts3
U can't on the cummins.
i just put this in my Ford 6.0.. does the dam thing do a tune on the fly.. like change from tow econ mode to tow mode and such.. or do you have to stop , and change it.. mine makes me stop and shut truck off, then do the changes with cycling the key on and off.
The edge cts3 is not a tuner just a monitor. U must have the cts3 evolution
And yea thats how normal tuning is installed unless u have switch of the fly
Thanks for the heads up, i didnt know the cts3 was just a moniter. I thought it was a tuner also.
Sending mine back tomorrow!!
If your gauge doesn’t say 13-14 while running alternator is failing to keep ecm running
Shouldn’t matter whether there’s batteries attached once started up.
It does it read 14v after i changed my batteries n alternator
Does that cts3 have a transmission tune with it
No it doesn't. Just a monitor
@@EVERYTHANGDIESEL so what are you doing for a transmission tune
I use my minimaxx to tune my trans
in the 80ts 85 much cooler I bet your state is 100 or higher
so we have a computer tablet laptop we so call phone than the multi media system and than this information center yeah know I understand depends on computers ^ _ ^ 2016 corsa edition does t have a lot/oooh tomtom device check updates.later
Your looking at a electrical issue🤔
Definitely not truck voltage is fine now
EVERYTHANG DIESEL awesome
What radar do you have?
Cobra I dont remember the model number.
EVERYTHANG DIESEL I have the same one, but it goes off whenever there’s no cop in sight and i hate when it goes off because it’s annoying, does yours do that?
Yes to a extent. If it detects a radar withi certain mileage it can set it off or if it picks up similar waves.
EVERYTHANG DIESEL Ahhh gotcha
All I have heard is that problem with numerous people
Once they came out with updates it fixed all the glitches
First
Hell yea!