Thanks a bunch! Like the video & subscribe to help the channel! My goal to help empower others to do work themselves. There has been an ever-growing gap for people who have stopped learning/using trade skills to complete tasks themselves from about the past 15 to 20-ish years. My step-by-step videos are just my way of sharing what I know with those who want to learn! RUclips is a very powerful 21st Century tool to help accomplish this. And I don't just work on cars/old lawnmowers, I work on just about everything! Stay tuned to learn more skills that I've picked up being a handyman/Kentuckian all of my life.
I’m excited when my Honda civic gets to 100,000 miles so I can watch this video again and feel good about myself taking care of my own car. Thanks for the video!
Your welcome, like/thumbs up the video to help me out! Whether you are just starting out learning how to work on your own car, a handy DIY'er, or a seasoned mechanic, my videos are meant to help everyone out. Perhaps you'll learn a trick or two that I show during my process.
Just want to say THANK YOU!!! I been looking for a video for this Civic Year for these specific maintenance. This covers just about almost everything I'm in the process to get taken care of.
Of course! I do have another video of me doing some other maintenance on this Civic coming out (changing engine oil & filter, changing the transmission fluid, bleeding the brake lines, etc.) coming out sometime in the future. Whenever I get enough time to edit it all together, I have about 14 hours of edit on this video. Like the video & subscribe to help out the channel!
Oh and if I could attach a picture... When I attempted to change the alternator, the serpentine belt tensioner broke. The molded bolt head for your socket/wrench/serpentine belt tool snapped off, along with the plate on that edge. I sounded like an angry sailor. After I calmed down, I grabbed a rag and placed it between the belt and the alternator pulley and manually pulled that belt through so the rag was over the pulley, then wrestled that belt off. After that process, I googled it up and learned you apply slow steady pressure on those hydraulic tensioners. And not alot at first either, or it'll fight you. Learn from my mistake and have fun!
My 2014 is at 307k km and everything is original lol I am just going to replace the engine coolant right after finishing this video. I believe that your original alternator will outlast that aftermarket alternator that you put in.
Hi there! I tend to agree that OEM components/parts usually outlast aftermarket and/or remanufactured ones (unless they are poorly designed from the OEM). The windings on the original one had begun to deteriorate (the rotor bearing sounded & felt very crusty as well), so I decided to go ahead and replace it while I had the serpentine belt off for the water pump replacement. I tested the output voltage on the original, and it was ~12.5 Volts, it should be around 13.9 - 14.5 V. Watch my video on the battery replacement to learn how to troubleshoot for that. Here's the link: ruclips.net/video/fSHJpXSQqbs/видео.html #KeepWrenching!
Hi there! I suggested that to the new owner, but he did not want to pay for the extra part. The tensioner part # OEM from Honda for this 2012 Civic is: 31170-R0A-025. Keep wrenching!
Very very helpful vedio. If someone is planning for such heavy maintenance please make sure you have complete tools and replacement part available before starting.❤
wow and i changed my alternator 4 times myself cause they kept giving me messed up ones. i asked my uncle to help me with the tensor cause it is so hard. at the end i put a large metal tube on the wrench to have more lever force and it worked wonders. Tanks for letting that know. the thermostat and water pump has never been changed.
Glad I could help! Using a long pipe with a wrench handle inside of it is a 'trick' that all mechanics learn at some time in their tinkering journey. #KeepWrenching!
Thanks a bunch! I am trying to help both DIY'ers and those who want to learn how to do & fix things themselves everywhere. Like the video & subscribe to help the channel!
What a great video. Thanks for posting this. I have definitely learned a few things. I haven't had to replace anything major on my 2012 Civic yet and it has 224,000 KM's. Hopefully it last's many more years.
Thank you very much! My goal is to make videos to help both DIY'ers and anyone that would like to gain knowledge on how to work on anything with your hands. Stay tuned for more videos!
I did my 100K miles maintainace last week on my 2012 Civic. I replaced the tensioner, water pump, alternator, alternator belt and pully. Oops, I forgot the thermostat 😮 The car now idles like when it was new. I plan to change the starter next week, an after thought. I will change the thermostat when I do the starter.
Great work! Few people do this kind of work on their own vehicles/equipment nowadays. All of the Honda OEM part numbers are in the description to help you out. Keep up the good work!
That 8mm hex bolt is scary stuff, it was so bugging me that I decided to replace the tensioner for the heck of it. It was a fight 😤 to get it out from factory torque. I would recommend replacing bolt and using some value compound put on your hex bit because 8 bit bolt has some play. I did not torque to spec, but half of it.
It was a pain wasn't it?!? Removing the passenger front tire & fender wall made life much easier for me. I think the factory torque spec is 41 ft-lbs, that's way too tight. I torqued it to about 20-25 ft-lbs and added blue thread locker to help it stay in-place.
Great write up. It’s funny because I would have probably never seized some of the bolts you glued! You’re selling but I would’ve done that dastardly tensioner and idlers while I was at it-corrosion is a thing here. Again, very informative, even if I would slightly do it different. I’m curious if the manuals have a trans filter, I suspect not being gear oil. Would love to see how they’re done.
Thanks for the comment! The buyer did not want to pay the additional ~$150.00 for the tensioner (Honda OEM part # 31170-R0A-025), but I agree, to go ahead and replace it plus the pulley's if you already have the front of the engine taken off. I'm not sure if the manuals have a trans filter, I know that the automatics do. It is a major pain to replace it, I did not tackle that endeavor, since we were selling it. If we were going to keep it for another 100,000 miles, I would have made a video on that as well. It only costs about $35-$40, Honda OEM part # 25430-PLR-003. I usually buy my Honda parts via HondaPartsNow.com, to save from dealer prices.
Thermostat around 100k miles seems pretty good, but and I don't know if this is the case with Honda's, but for Subaru's water pumps usually last 180k miles or every other timing belt service. This isn't always the case, but I figured Honda would be similar? What are your personal experiences? I think around 100-120k I would re-do the thermostat as you did, it's in an easy spot too. Thanks for the video!
Thanks a bunch! I am editing another video on this old Civic currently, but check out the other one of me replacing the sunroof here: ruclips.net/video/4hr-qAgpOsw/видео.htmlsi=9ofC9Xn5A9MUSZuM
That's a whole lot of miles! I would recommend changing the thermostat & checking valve adjustment when you are that high on miles. Keep chugging along!
Hey! Love this video SuperGuyKY :) I know that after you flush the engine with distilled water, there is still a good amount of distilled water remaining in the system. When you add the 50/50 coolant, would it be diluted by this water?? Just wanted to get your thoughts on this as I'm planning to follow your guide to flush my coolant. Thanks!
Hi there & glad you enjoyed the video! Since I drained the water from the radiator, overflow tank (off camera with a turkey baster), replaced the water pump, & the thermostat all after flushing the cooling system with distilled water 4x. My opinion is that there would be a minimal amount (not worth worrying about, at least I didn't) of distilled water remaining in the engine coolant orifices when I was adding the 50/50 pre-mixed Honda coolant with the spill-proof funnel. I'd go ahead and replace the thermostat if you are over 100K miles. Perhaps the water pump as well, but that is upto you. Like & share the video to help you the channel & I hope this helps!
Ur supposed to take a sample after do the final fill with coolant and test it to see if it’s 50/50 or not . That’s the annoying part abt doing a full flush.
Hi there! I do not do the trans fluid change in this video, that is on an upcoming one (engine oil & filter change, brake fluid flush, trans fluid change, spark plugs, I think that is it?). I have several in edit currently. The good news is that it is not difficult. Removing the air intake filter and it's plastic case makes the job really easy. I would add a few ounces of AT-205 to help re-condition the main seal against the engine also. That is what I did, it stopped the very slight leak that this Civic had before it went to it's new owner.
@@SuperGuyKY Awesome thank you for that! My 2015 has 180k on it so now I'm toying with the idea of new water pump. Once I get the current issues ironed out that is!
Your welcome! If you are at 180k in mileage, I would recommend checking all major wear items; bushings, ball-joints, wheel bearings, starter solenoid, spark plugs, etc. Just because a component has a large amount of miles on it, does not mean that it has failed/is in need of replacing. Some last longer than others, it just depends on the stresses and loads that they are put under.
Thanks! Remember to give it a 'thumbs up' & like the video! That helps me out on RUclips's analytics & algorithms. Subscribe to see me fix more things. New videos are coming soon!
Hi there! Thanks for subscribing. As the channel grows, I will generate revenue to buy new projects. I'm not there yet, but I should be by early 2025 to begin YT monetization.
As someone who changed my ac compressor from top and bottom on a car ramp. it's possible to do it without taking off the wheel. That tensioner.....ughhh.
I agree that it is possible, I would say that taking the front passenger wheel & fender liner out would make the ac compressor easier although. That tensioner & the 8 mm "nemesis" bolt.... can be a huge challenge to remove.
Do yourself a favor and save all the old parts in a box. My car reached an age that was near impossible to order new parts and because of a maintenance part I could no longer get I had to give up my old reliable car. It pays to save old out of date parts that are no longer available.
I agree! My dad has an El Camino that he bought new back in the 80's, and we always save the old parts when we work on it. The only place we can find any parts of it, are either eBay, or Original Parts Group.
Hi there, I'm not sure what you mean by 'battery cel'? The new battery was charging at the correct amperage range with the new AutoZone alternator if that answers your question?
Ohhhh I see what you mean now. The answer is no, there was no issue with charging once I installed the AutoZone alternator. I bought the 'Duralast Gold' and not a re-manufactured one for the next owner. For whomever reading this, the red battery light that he is referring too, means that there is an issue with the car battery itself, or the charging system for re-charging the battery from the alternator. I did not have either issue.
Hi there! If I was going to be keeping this vehicle for another 100,000 miles, yes I would have done the tensioner, pulleys, spark plugs (changed out off-camera), engine & trans mounts, tie rod bushings, etc. but since it was already sold (pending pickup from new owner and awaiting this work to be completed) the new owner and I decided that the more basic-level of 100K mile service was more appropriate.
So you say always use genuine Honda parts but your alternator is after market. Why? Also you went thru all that trouble, why wouldn't you replace your belt tensioner and your coolant hoses?
Hi there Eddy, if you read the above comments, you’ll find the answer to your questions. Please check out my other Civic videos & more are coming soon. Thanks for watching!
Hi there! At 34:45, the 'official' part name for that from Honda is a 'Thermostat Cover', part # 19311-R1A-A00. It was a pain getting that off & the new one on, so I wouldn't say that you 'have too' replace it as I did. Just clean the mating surfaces and re-install after you put a new thermostat in. & yes I did replace the alternator at the same time, it was reading low on Amps going back to the battery, that's why I have a video replacing the battery on this car also. Here's the link; ruclips.net/video/fSHJpXSQqbs/видео.html
How did you get your overflow tank to get emptied, I filled it up in the beginning and it never went down throughout the process but its filled with the distilled water?
You have to wait until the thermostat opens and all of the distilled water is moving throughout the antifreeze/cooling system. Run the vehicle for about 10-15 minutes and then pop the overflow tank cap before you open the petcock drain valve.
I'd like to get started on these repairs, but I don't have the money to do them all at once. Which ones would you recommend first? I already do regular oil changes and change my breaks. I've never really done any work in the engine bay other than servicing the battery and checking the fluids
Hi there, if you have been doing the standard engine oil & filter changes. My first question would be, when was the last time you changed the transmission fluid? Not flush, change. I don't go over that in this video, but I have A-LOT of additional footage to sort through, so it may be somewhere in there. The very simplest under the hood thing to do, is just to change the air filter. For what I do in this video, it depends on your mileage/use of your Civic, but my guess is the antifreeze/coolant flush (with or without changing the thermostat) is the first thing I would do if I were you. Just be 1000% sure that the engine/coolant system is fully cooled down (has not ran for ~10 hours) before you crack open that radiator cap. Otherwise, you'll be scalded with hot Honda antifreeze.
So when you were refilling the radiator with the Honda 50/50 mix, you said to fill the overflow. Did you fill it with Distilled water or the 50/50? Or does it matter?
Yes, it does matter. During the antifreeze/coolant flushes, always re-fill with distilled water. Once you have completed your final flush, then drain all of the distilled water and re-fill both the radiator & the overflow with the Honda 50/50 mix.
Hi there! Yes, you need to wait until the thermostat opens between each flush, reason being this way you circulate the new fluid/distilled water throughout the entire cooling system, and not just the radiator. This is usually between 10-15 minutes from when you start the vehicle. I was replacing the thermostat & water pump, so I figured I would flush the antifreeze/coolant while I had those parts off. They leak all of the fluid out while replacing them anyway.
Thanks for commenting! The alternator was reading low amps previously, so the battery died, I have a separate video of me replacing that as well. The water pump was replaced at 100k miles since it is a normal wear & tear item. This isn't part of the service schedule for the 1.8L Honda I-4, but any mechanic will recommend replacing both the water pump & thermostat at xxx,xxx miles, since as they wear, it makes it harder for the engine to keep running. Think like a runner that started running without a wind chute, then a small wind chute, and the chute just gets bigger over time. Make sense?
@@SuperGuyKY ah got it yeah makes sense. Kinda like engine mounts sometimes on the 2.4l. didn't think about checking the alternator I'm gonna have to do that at least & lookup the rest for the 2.4 haha
Thanks! On this specific video, I didn't see the need to go over torque specs. The only ones that were critical are the 8 mm for the tensioner (I think the torque from Honda is ~41 ft-lbs? Way too high), I tightened it to about 25 ft-lbs and blue Loctite on it so it could be removed in the future. And the bolts that fasten the water pump to the engine, I tightened them to about 20 ft-lbs each. Perhaps Loctite wasn't necessary, but it doesn't hurt and provides peace of mind to whoever did the job.
I have 2012 HC I had my car siting there running because they were putting a radio. Well doing that there was water leaking in the bottom of my car do you know why? My radiator is full.
Hi there! I am guessing that your air conditioning was running while the radio was being installed, correct? in that case, the water that was leaking may have been coming from the evaporator core. A/C systems on cars are designed to let the extra moisture/water leak out.
@@SuperGuyKY no the car was running in park. No AC was on I step out of my car cuz I smell coolant. I look down there was water coming down from my engine. Once it cool down check the radiator and it.was full.
Hmmm unless you have a leak from the water pump or the overflow tank, not sure really. How long did you let it cool down? I would let the vehicle cool for at least 12 hours to get an accurate coolant level reading.
Hi there, Anthony! I performed all of this work before I sold this car, I asked the new owner & he did not want to pay the additional ~$140 for a new tensioner.
Was reading too lower on the Amperage current return to the battery. I have another video of me swapping the battery out on the Civic as well. Here's the link: ruclips.net/video/fSHJpXSQqbs/видео.htmlsi=Hch2tHVFrrqoLyAu
Hi there! Water pumps, just like all other mechanical components on any piece of equipment (cars, boats, tractors, bulldozers, etc.) experience wear & tear on them after so many cycles of use. At 24:59 in the video I spin both the old & then new impeller bearings, they are night and day different on the amount of effort to spin them. One-hundred thousand miles is a good rule of thumb to replace them in my experience, same with serpentine belts. Like & subscribe to help out the channel!
A good idea, but this Civic was sold within a week of this work being completed. I spoke with the new owner and he did not want me to replace that. All that I completed (and more, future video HINT HERE!) was enough for him to be comfortable paying the price we negotiated. The Honda OEM part # for a new belt tensioner on this 2012 Civic 1.8L I-4 is: 31170-R0A-025. It's about $200.
Hi there! The overflow anti-freeze reservoir I think you mean? Once the thermostat opens up, the overflow tank gets mixed with all anti-freeze to flush the system. It is critical to wait for the thermostat to open, to fully flush the internal coolant orifices inside of the engine.
Hi there! Can you show me a minute & second mark so I can figure out what you mean? I likely did something off-camera that I forgot to explain or show.
Sorry to burst your bubble but my 14 civic just hit 300k and the only part that failed of all those you replaced was the belt tensioner at 208k. Just nuts to replace good japanese parts with chinese garbage before they break.
As long as it works, it works. I just knew that this car had a hard life, so I figured I would replace some of the common wear parts before handing it off to it's new owner.
Hi there! I am not sure what 'qualified/certified/ Honda dealer service advisor told you that. as that is 100% flat wrong. Did they also try to sell you spark plugs for a diesel as well? The transmission filter is located behind the air intake boot inside of the engine bay close to the firewall. I was going to replace it, but the new owner did not think it was necessary, so I didn't. It is also quite a pain to do so. Here is the Honda OEM part # for the transmission filter; 25430-PLR-003. Here is a link to where I usually buy Honda OEM parts for cheaper than dealer prices. www.hondapartsnow.com/genuine/honda~filter~25430-plr-003.html?vin=19XFB2F8XCE052566&make=Honda&model=Civic&year=2012&submodel=&extra1=&extra2=&filter=()
Of course. My apologies as I get quite worked up when dealers tell customers one thing, when another is the case. Some have earned their reputation and I have been on the latter-end of some of those experiences.
Youve given about the easiest, simplest, plain video on the 100k service and you made it look and sound enjoying. Great job. 👍
Thanks a bunch! Like the video & subscribe to help the channel! My goal to help empower others to do work themselves. There has been an ever-growing gap for people who have stopped learning/using trade skills to complete tasks themselves from about the past 15 to 20-ish years. My step-by-step videos are just my way of sharing what I know with those who want to learn! RUclips is a very powerful 21st Century tool to help accomplish this. And I don't just work on cars/old lawnmowers, I work on just about everything! Stay tuned to learn more skills that I've picked up being a handyman/Kentuckian all of my life.
I’m excited when my Honda civic gets to 100,000 miles so I can watch this video again and feel good about myself taking care of my own car. Thanks for the video!
Your welcome, like/thumbs up the video to help me out! Whether you are just starting out learning how to work on your own car, a handy DIY'er, or a seasoned mechanic, my videos are meant to help everyone out. Perhaps you'll learn a trick or two that I show during my process.
This deserves a million views
Thanks a bunch! Like the video & subscribe to help out the channel!
I am at the 103k mark with my 2014 lx civic so I am glad I came across this video
Happy that I could help you out. Like the video to help channel reach across RUclips's tracking algorithm.
Just want to say THANK YOU!!! I been looking for a video for this Civic Year for these specific maintenance. This covers just about almost everything I'm in the process to get taken care of.
Of course! I do have another video of me doing some other maintenance on this Civic coming out (changing engine oil & filter, changing the transmission fluid, bleeding the brake lines, etc.) coming out sometime in the future. Whenever I get enough time to edit it all together, I have about 14 hours of edit on this video. Like the video & subscribe to help out the channel!
Oh and if I could attach a picture...
When I attempted to change the alternator, the serpentine belt tensioner broke. The molded bolt head for your socket/wrench/serpentine belt tool snapped off, along with the plate on that edge.
I sounded like an angry sailor.
After I calmed down, I grabbed a rag and placed it between the belt and the alternator pulley and manually pulled that belt through so the rag was over the pulley, then wrestled that belt off.
After that process, I googled it up and learned you apply slow steady pressure on those hydraulic tensioners. And not alot at first either, or it'll fight you.
Learn from my mistake and have fun!
My 2014 is at 307k km and everything is original lol
I am just going to replace the engine coolant right after finishing this video. I believe that your original alternator will outlast that aftermarket alternator that you put in.
Hi there! I tend to agree that OEM components/parts usually outlast aftermarket and/or remanufactured ones (unless they are poorly designed from the OEM). The windings on the original one had begun to deteriorate (the rotor bearing sounded & felt very crusty as well), so I decided to go ahead and replace it while I had the serpentine belt off for the water pump replacement. I tested the output voltage on the original, and it was ~12.5 Volts, it should be around 13.9 - 14.5 V. Watch my video on the battery replacement to learn how to troubleshoot for that. Here's the link: ruclips.net/video/fSHJpXSQqbs/видео.html
#KeepWrenching!
Perfect😅
I would go the extra mile and replace the tensioner itself!
Hi there! I suggested that to the new owner, but he did not want to pay for the extra part. The tensioner part # OEM from Honda for this 2012 Civic is: 31170-R0A-025. Keep wrenching!
Awesome video! The video Id love to see that I can’t find anywhere is:
How to remove and install a new transmission for 9th Gen Civic (automatic)
Very very helpful vedio.
If someone is planning for such heavy maintenance please make sure you have complete tools and replacement part available before starting.❤
Thank you for the comment! All parts and necessary tools needed are in the video description. Like the video & subscribe to help out the channel!
now that's a proper coolant flush.
Thanks! Like the video & subscribe to help out the channel!
wow and i changed my alternator 4 times myself cause they kept giving me messed up ones. i asked my uncle to help me with the tensor cause it is so hard. at the end i put a large metal tube on the wrench to have more lever force and it worked wonders. Tanks for letting that know. the thermostat and water pump has never been changed.
Glad I could help! Using a long pipe with a wrench handle inside of it is a 'trick' that all mechanics learn at some time in their tinkering journey. #KeepWrenching!
Such a great video! Should have way more views.
Thanks a bunch! I am trying to help both DIY'ers and those who want to learn how to do & fix things themselves everywhere. Like the video & subscribe to help the channel!
Thank you brother for the video, I need this explanation too much for my Honda civic 2014.
You are welcome! Like the video & subscribe to help out the channel.
What a great video. Thanks for posting this. I have definitely learned a few things. I haven't had to replace anything major on my 2012 Civic yet and it has 224,000 KM's. Hopefully it last's many more years.
Glad to hear! I hope some of the things I showed in this video help you out for any work you may do in the future. #KeepWrenching!
You made this video very well. Easy step by step and put a lot of effort into the video. For that you earned a subscriber
Thank you very much! My goal is to make videos to help both DIY'ers and anyone that would like to gain knowledge on how to work on anything with your hands. Stay tuned for more videos!
I did my 100K miles maintainace last week on my 2012 Civic. I replaced the tensioner, water pump, alternator, alternator belt and pully. Oops, I forgot the thermostat 😮
The car now idles like when it was new.
I plan to change the starter next week, an after thought. I will change the thermostat when I do the starter.
Great work! Few people do this kind of work on their own vehicles/equipment nowadays. All of the Honda OEM part numbers are in the description to help you out. Keep up the good work!
That 8mm hex bolt is scary stuff, it was so bugging me that I decided to replace the tensioner for the heck of it. It was a fight 😤 to get it out from factory torque. I would recommend replacing bolt and using some value compound put on your hex bit because 8 bit bolt has some play. I did not torque to spec, but half of it.
It was a pain wasn't it?!? Removing the passenger front tire & fender wall made life much easier for me. I think the factory torque spec is 41 ft-lbs, that's way too tight. I torqued it to about 20-25 ft-lbs and added blue thread locker to help it stay in-place.
Very very nice video great info and amazing camera skills 👌
Thanks a bunch! Like the video & subscribe to help out the channel!
Thanks for posting. I am older now and not that brave to attempt this on my own.
You are welcome! The step-by-step video should make it simple for anyone to complete this themselves.
Well done,very clear video about repairing job.
Thank you very much! Like the video & subscribe to help out the channel!
Great write up. It’s funny because I would have probably never seized some of the bolts you glued! You’re selling but I would’ve done that dastardly tensioner and idlers while I was at it-corrosion is a thing here. Again, very informative, even if I would slightly do it different.
I’m curious if the manuals have a trans filter, I suspect not being gear oil. Would love to see how they’re done.
Thanks for the comment! The buyer did not want to pay the additional ~$150.00 for the tensioner (Honda OEM part # 31170-R0A-025), but I agree, to go ahead and replace it plus the pulley's if you already have the front of the engine taken off. I'm not sure if the manuals have a trans filter, I know that the automatics do. It is a major pain to replace it, I did not tackle that endeavor, since we were selling it. If we were going to keep it for another 100,000 miles, I would have made a video on that as well. It only costs about $35-$40, Honda OEM part # 25430-PLR-003. I usually buy my Honda parts via HondaPartsNow.com, to save from dealer prices.
Mulțumesc mult pentru tot! 🙋♂️
I think this says "Thanks alot for everything!". My reply is, you are very welcome!
Thermostat around 100k miles seems pretty good, but and I don't know if this is the case with Honda's, but for Subaru's water pumps usually last 180k miles or every other timing belt service. This isn't always the case, but I figured Honda would be similar? What are your personal experiences? I think around 100-120k I would re-do the thermostat as you did, it's in an easy spot too. Thanks for the video!
You’re a pro!
Thanks a bunch! I am editing another video on this old Civic currently, but check out the other one of me replacing the sunroof here: ruclips.net/video/4hr-qAgpOsw/видео.htmlsi=9ofC9Xn5A9MUSZuM
325,000 on my 2012 .... Ive only ever had to change Oil, Transmission fluid, Coolant and brakes. Tires as well!
That's a whole lot of miles! I would recommend changing the thermostat & checking valve adjustment when you are that high on miles. Keep chugging along!
Hey! Love this video SuperGuyKY :) I know that after you flush the engine with distilled water, there is still a good amount of distilled water remaining in the system. When you add the 50/50 coolant, would it be diluted by this water?? Just wanted to get your thoughts on this as I'm planning to follow your guide to flush my coolant. Thanks!
Hi there & glad you enjoyed the video! Since I drained the water from the radiator, overflow tank (off camera with a turkey baster), replaced the water pump, & the thermostat all after flushing the cooling system with distilled water 4x. My opinion is that there would be a minimal amount (not worth worrying about, at least I didn't) of distilled water remaining in the engine coolant orifices when I was adding the 50/50 pre-mixed Honda coolant with the spill-proof funnel. I'd go ahead and replace the thermostat if you are over 100K miles. Perhaps the water pump as well, but that is upto you. Like & share the video to help you the channel & I hope this helps!
@@SuperGuyKY Thanks for the reply and info! I will definitely like and subscribe to your awesome channel :)
Ur supposed to take a sample after do the final fill with coolant and test it to see if it’s 50/50 or not . That’s the annoying part abt doing a full flush.
Will you be doing the trans fluid change in a video? I'd be stoked to see it, my 2015 Civic needs it.
Hi there! I do not do the trans fluid change in this video, that is on an upcoming one (engine oil & filter change, brake fluid flush, trans fluid change, spark plugs, I think that is it?). I have several in edit currently. The good news is that it is not difficult. Removing the air intake filter and it's plastic case makes the job really easy. I would add a few ounces of AT-205 to help re-condition the main seal against the engine also. That is what I did, it stopped the very slight leak that this Civic had before it went to it's new owner.
@@SuperGuyKY Awesome thank you for that! My 2015 has 180k on it so now I'm toying with the idea of new water pump. Once I get the current issues ironed out that is!
Your welcome! If you are at 180k in mileage, I would recommend checking all major wear items; bushings, ball-joints, wheel bearings, starter solenoid, spark plugs, etc. Just because a component has a large amount of miles on it, does not mean that it has failed/is in need of replacing. Some last longer than others, it just depends on the stresses and loads that they are put under.
VERY NICCE SHOULD HAVE MORE VIEWS
Thanks! Remember to give it a 'thumbs up' & like the video! That helps me out on RUclips's analytics & algorithms.
Subscribe to see me fix more things. New videos are coming soon!
Subscribed more civic videos please
Hi there! Thanks for subscribing. As the channel grows, I will generate revenue to buy new projects. I'm not there yet, but I should be by early 2025 to begin YT monetization.
As someone who changed my ac compressor from top and bottom on a car ramp. it's possible to do it without taking off the wheel. That tensioner.....ughhh.
I agree that it is possible, I would say that taking the front passenger wheel & fender liner out would make the ac compressor easier although. That tensioner & the 8 mm "nemesis" bolt.... can be a huge challenge to remove.
Do yourself a favor and save all the old parts in a box. My car reached an age that was near impossible to order new parts and because of a maintenance part I could no longer get I had to give up my old reliable car. It pays to save old out of date parts that are no longer available.
I agree! My dad has an El Camino that he bought new back in the 80's, and we always save the old parts when we work on it. The only place we can find any parts of it, are either eBay, or Original Parts Group.
Very detail video. Great great job👍. Did battery cel pop out with autozone alternator?
Hi there, I'm not sure what you mean by 'battery cel'? The new battery was charging at the correct amperage range with the new AutoZone alternator if that answers your question?
@@SuperGuyKY sometimes the battery u get a red battery that illuminates on the dash after installing autozone alternator
Ohhhh I see what you mean now. The answer is no, there was no issue with charging once I installed the AutoZone alternator. I bought the 'Duralast Gold' and not a re-manufactured one for the next owner. For whomever reading this, the red battery light that he is referring too, means that there is an issue with the car battery itself, or the charging system for re-charging the battery from the alternator. I did not have either issue.
do you use a jack rod? i saw it on ads make your lift jack to be also jack stand make a review video ok
Great video!
Thanks! This is one of many upcoming videos of me going into detail on exactly how to perform simple car maintenance tasks.
I would change those idler and tensioner and since you did everything else not change all the radiator hoses while you've got the rad empty .
Hi there! If I was going to be keeping this vehicle for another 100,000 miles, yes I would have done the tensioner, pulleys, spark plugs (changed out off-camera), engine & trans mounts, tie rod bushings, etc. but since it was already sold (pending pickup from new owner and awaiting this work to be completed) the new owner and I decided that the more basic-level of 100K mile service was more appropriate.
So you say always use genuine Honda parts but your alternator is after market. Why? Also you went thru all that trouble, why wouldn't you replace your belt tensioner and your coolant hoses?
Hi there Eddy, if you read the above comments, you’ll find the answer to your questions. Please check out my other Civic videos & more are coming soon. Thanks for watching!
At 34:45, what is that elbow part called?
Hi there! At 34:45, the 'official' part name for that from Honda is a 'Thermostat Cover', part # 19311-R1A-A00. It was a pain getting that off & the new one on, so I wouldn't say that you 'have too' replace it as I did. Just clean the mating surfaces and re-install after you put a new thermostat in. & yes I did replace the alternator at the same time, it was reading low on Amps going back to the battery, that's why I have a video replacing the battery on this car also. Here's the link; ruclips.net/video/fSHJpXSQqbs/видео.html
@@SuperGuyKY Thank you
How did you get your overflow tank to get emptied, I filled it up in the beginning and it never went down throughout the process but its filled with the distilled water?
You have to wait until the thermostat opens and all of the distilled water is moving throughout the antifreeze/cooling system. Run the vehicle for about 10-15 minutes and then pop the overflow tank cap before you open the petcock drain valve.
I'd like to get started on these repairs, but I don't have the money to do them all at once. Which ones would you recommend first? I already do regular oil changes and change my breaks. I've never really done any work in the engine bay other than servicing the battery and checking the fluids
Hi there, if you have been doing the standard engine oil & filter changes. My first question would be, when was the last time you changed the transmission fluid? Not flush, change. I don't go over that in this video, but I have A-LOT of additional footage to sort through, so it may be somewhere in there. The very simplest under the hood thing to do, is just to change the air filter. For what I do in this video, it depends on your mileage/use of your Civic, but my guess is the antifreeze/coolant flush (with or without changing the thermostat) is the first thing I would do if I were you. Just be 1000% sure that the engine/coolant system is fully cooled down (has not ran for ~10 hours) before you crack open that radiator cap. Otherwise, you'll be scalded with hot Honda antifreeze.
So when you were refilling the radiator with the Honda 50/50 mix, you said to fill the overflow. Did you fill it with Distilled water or the 50/50? Or does it matter?
Yes, it does matter. During the antifreeze/coolant flushes, always re-fill with distilled water. Once you have completed your final flush, then drain all of the distilled water and re-fill both the radiator & the overflow with the Honda 50/50 mix.
I would probably use anti-seize before I used loctite.
Do you have to wait in between each flush, I see you open the blue cap after each time you run the car.
Hi there! Yes, you need to wait until the thermostat opens between each flush, reason being this way you circulate the new fluid/distilled water throughout the entire cooling system, and not just the radiator. This is usually between 10-15 minutes from when you start the vehicle. I was replacing the thermostat & water pump, so I figured I would flush the antifreeze/coolant while I had those parts off. They leak all of the fluid out while replacing them anyway.
Why did the alternator & water pump need to be replaced? I have the 2.4 in the civic si. Is that really part of the 100k service for the 1.8?
Thanks for commenting! The alternator was reading low amps previously, so the battery died, I have a separate video of me replacing that as well. The water pump was replaced at 100k miles since it is a normal wear & tear item. This isn't part of the service schedule for the 1.8L Honda I-4, but any mechanic will recommend replacing both the water pump & thermostat at xxx,xxx miles, since as they wear, it makes it harder for the engine to keep running. Think like a runner that started running without a wind chute, then a small wind chute, and the chute just gets bigger over time. Make sense?
@@SuperGuyKY ah got it yeah makes sense. Kinda like engine mounts sometimes on the 2.4l. didn't think about checking the alternator I'm gonna have to do that at least & lookup the rest for the 2.4 haha
Good video, cover most of the details beside following torque specs.
FYI - I have never had to use any loctite (red or blue) on any Honda.
Thanks! On this specific video, I didn't see the need to go over torque specs. The only ones that were critical are the 8 mm for the tensioner (I think the torque from Honda is ~41 ft-lbs? Way too high), I tightened it to about 25 ft-lbs and blue Loctite on it so it could be removed in the future. And the bolts that fasten the water pump to the engine, I tightened them to about 20 ft-lbs each. Perhaps Loctite wasn't necessary, but it doesn't hurt and provides peace of mind to whoever did the job.
I have 2012 HC I had my car siting there running because they were putting a radio. Well doing that there was water leaking in the bottom of my car do you know why? My radiator is full.
Hi there! I am guessing that your air conditioning was running while the radio was being installed, correct? in that case, the water that was leaking may have been coming from the evaporator core. A/C systems on cars are designed to let the extra moisture/water leak out.
@@SuperGuyKY no the car was running in park. No AC was on I step out of my car cuz I smell coolant. I look down there was water coming down from my engine. Once it cool down check the radiator and it.was full.
Hmmm unless you have a leak from the water pump or the overflow tank, not sure really. How long did you let it cool down? I would let the vehicle cool for at least 12 hours to get an accurate coolant level reading.
Why not get a new tensioner while you had it out?
Hi there, Anthony! I performed all of this work before I sold this car, I asked the new owner & he did not want to pay the additional ~$140 for a new tensioner.
Why did you change the alternator ?
Was reading too lower on the Amperage current return to the battery. I have another video of me swapping the battery out on the Civic as well. Here's the link: ruclips.net/video/fSHJpXSQqbs/видео.htmlsi=Hch2tHVFrrqoLyAu
I thought you only had to change the waterpump if it starts leaking!?
Hi there! Water pumps, just like all other mechanical components on any piece of equipment (cars, boats, tractors, bulldozers, etc.) experience wear & tear on them after so many cycles of use. At 24:59 in the video I spin both the old & then new impeller bearings, they are night and day different on the amount of effort to spin them. One-hundred thousand miles is a good rule of thumb to replace them in my experience, same with serpentine belts. Like & subscribe to help out the channel!
You even lift bro?
I think if I did this I would have included a new belt tensioner as sods law says within short time it would start sweeking
A good idea, but this Civic was sold within a week of this work being completed. I spoke with the new owner and he did not want me to replace that. All that I completed (and more, future video HINT HERE!) was enough for him to be comfortable paying the price we negotiated.
The Honda OEM part # for a new belt tensioner on this 2012 Civic 1.8L I-4 is: 31170-R0A-025. It's about $200.
@@SuperGuyKY lucky guy whoever bought it
@2:51: Scale deposits differ from rust.
How do you flush the reservoir?
Hi there! The overflow anti-freeze reservoir I think you mean? Once the thermostat opens up, the overflow tank gets mixed with all anti-freeze to flush the system. It is critical to wait for the thermostat to open, to fully flush the internal coolant orifices inside of the engine.
@@SuperGuyKY why have I seen people use siphon tools to retract coolant from reservoir. Is that wrong?
It's not wrong. They are just getting all possible coolant out if they are not waiting for the thermostat to open. That's all. Either/or will work.
@@SuperGuyKY how long does it take for thermostat to open. 15 minutes?
I would wait 15 - 20 minutes for it to open. I think I did 15 minutes in the video with the shop fan blowing (IMPORTANT if vehicle is stationary).
You got the coolant levels in the tank all wrong. The level mark is at the bottom of the bottle.
Hi there! Can you show me a minute & second mark so I can figure out what you mean? I likely did something off-camera that I forgot to explain or show.
Whats the code name for that motor??
HI there! I think the code for the 1.8L Inline-4 cylinder engine from Honda is, R18Z16.
Stay tuned for more videos of this car upcoming!
@@SuperGuyKY thank you sir!
Your welcome!
Sorry to burst your bubble but my 14 civic just hit 300k and the only part that failed of all those you replaced was the belt tensioner at 208k. Just nuts to replace good japanese parts with chinese garbage before they break.
As long as it works, it works. I just knew that this car had a hard life, so I figured I would replace some of the common wear parts before handing it off to it's new owner.
@@SuperGuyKY I have had about a 30% failure rate with chinese parts. I now pay 3-4x more to get the Jap parts OEM. Tired of doing the repairs twice.
I did my 200,000 mile this past weekend 😭
Alright! Happy to hear that. With proper maintenance, hopefully you can get another 200,000.
Keep wrenching!
@@SuperGuyKY I ended up doing all the things you did, plus motor and trans mounts rotors….mine has drum brakes in the rear which is stupid
star your wife in your videos, will def. boost your views 🤝
Lol perhaps one day.
Thirsty
@@Litto1 lol jst trynna help a brother out with his informative video/channel as i would very much need it to do all these for my honda civic
I've been told by a Honda dealer service advisor there's no transmission filter on these cars. 🤔
Is that right?
Hi there! I am not sure what 'qualified/certified/ Honda dealer service advisor told you that. as that is 100% flat wrong. Did they also try to sell you spark plugs for a diesel as well? The transmission filter is located behind the air intake boot inside of the engine bay close to the firewall. I was going to replace it, but the new owner did not think it was necessary, so I didn't. It is also quite a pain to do so.
Here is the Honda OEM part # for the transmission filter; 25430-PLR-003. Here is a link to where I usually buy Honda OEM parts for cheaper than dealer prices. www.hondapartsnow.com/genuine/honda~filter~25430-plr-003.html?vin=19XFB2F8XCE052566&make=Honda&model=Civic&year=2012&submodel=&extra1=&extra2=&filter=()
@@SuperGuyKY no need to be snarky. I was wondering about that which is why I asked.
Thank you though, I appreciate you telling me where it is
Of course. My apologies as I get quite worked up when dealers tell customers one thing, when another is the case. Some have earned their reputation and I have been on the latter-end of some of those experiences.
I didn't here any cursing 😮
...That was edited out XD