Recipe For a 9 Second 1/4 Mile All Motor NA S550 Mustang - Building the Steeda Silver Bullet
HTML-код
- Опубликовано: 31 июл 2024
- www.steeda.com/2018-mustang-s...
Our Steeda Silver Bullet has broken into the 9 second mark! How was it done? Join us for a full episode providing a detailed recipe for getting a naturally aspirated all motor #S550 Ford Mustang GT into the 10’s or even 9’s in the 1/4 mile and some of the challenges we overcame along the way.
Stay tuned to Steeda for more updates about the Silver Bullet as we continue to see how deep we can push this car into the 9’s!
Subscribe: bit.ly/Steeda_YT
Shop Ford performance parts at www.Steeda.com!
Purchase these parts directly from Steeda:
---
Steeda Website:
www.steeda.com
Steeda Performance Vehicles
www.steedavehicles.com
Steeda Europe:
www.steeda.co.uk
Steeda Facebook:
/ steedaautosports
Steeda Instagram:
/ steedaautosports
Steeda Twitter:
/ steedaautosport
Steeda Blog:
www.steedablog.com/
#MustangParts #ModernMuscleCar #MustangSuspension #AmericanMuscleCar #StoptheHop #SteedaVehicles #SteedaHardcore #Steeda #SpeedMatters 
Авто/Мото
Great video! I had the pleasure of meeting Scott at the NMRA Bradenton race and can say Steeda is lucky to have him a great racer and true gentleman!
Thank you sir!
@Rene Louie beware I smell scam ...
9 second na is insane. Steeda all the way. They will be in my build for sure. Only the springs so far but it's a start.
There are 2.0 liter Honda’s that run 8s naturally aspirated.. it’s definitely impressive. But I am kinda of disappointed. It hurts when a civic that’s half the motor is faster for less than half the price...
@@tylerbaker6603 they're so light. I used to have a civic but ill stick with the mustang for now 😁
@@tylerbaker6603 please send me a link to what you speak of
C M just type in N/A Honda record and scroll through those vids that come up
@@CM-maga stick shift to
Love my 21 mustang gt took it to the strip first thing and ran the same times … my best was 13.3 with manual trans . Can’t wait to tune the setup and port the heads . I like how they have done the research and know what works well 👌
I have an 05 GT and I can say Steeda does make top tier parts that are American made. The cold air intake with a tune made it feel like a completely different car as my first power adder. Picked up their shocks/struts and coils. I know they will be an awesome combo because they are meant to work together unlike a lot of setups out there. The powder coat on the coils looks insanely good. Just saving up for camber plates and a rear upper.
awesome build, Speed Matters!
I've been 11.8 in my 2019 Mustang Gt PP1 A10 car it has the 401A premium package. That's on a M&H 275 50 17 drag radial, mounted on VMS racing wheels and a rear seat delete. I can't wait to get some Steeda suspension goodies for the car for this season.
Thank you #steeda for this video. Good detailing of issues and solutions.
Great new video guys.
Awesome video! Just getting to know Steeda and am so impressed. Have a mod’ed silver 15 GT auto. Love it! Going to contact Steeda for my next round of modifications.
Great video fellas! Keep it up!
Great video. Thanks guys
I put one on my 89 fox vert. Tightened up nicely
@steeda Excellent video guys!! Just order the 3” steeda cat back, can’t wait to install it and order all the suspension goodies. Thanks for explaining all of this and reassuring my parts choices.
Awesome! We'll have an install video up soon for that system. Enjoy! -Chris
Good video. Watch out for those ET FRONT RUNNERS. I GOT DQ for running those in NMRA. TS
Love this video🔥🔥😍
Watching this video is better than a Netflix movie; and that’s coming from a Road Course guy, not a dragster
Best video of 2020 for sure, I will replicate this build on my 19 GT
Yo how did it went?
Awesome video and great job with the car...a second NA gen 3 coyote is off the chain!
honestly the prices you guys have are resonable aswell. i couldnt believe it
Which thickness optic armor windows are in the silver bullet?
Were the Ferrea valves a wider diameter or same as stock?
Anyone know the specs of that stage 3 comp cams ? Cant find them anywhere. Or can I just call them up and ask for the “stage 3”
How does Steeda feel about Royal Purple Oil..and products?
So what rear gear are you using to be in the 9's?
Will this work on a gen2 coyote?
Sweet
what conveter specs?
Einstein kicking Ass with Mustangs . . . . Staying Frosty
Got a 2016 gtcs. Bought it new. Just ordered my first mod through FRENCHIES FORD Massena NY. Ordered a cat back h pipe mbrp exhaust. Cant wait for it to come in. Going to ask if I can do it with their guidance or at least film it.
Feel free to send some advice or a free promo or two
Next phase..Steeda Supercharger!
I’m just realizing all these ford peformancr shop in Georgia
Who’s building a complete cradle for the rear of these cars.?
Racing half shafts??? Transmission clutches??? Just wondering ... I see folks doing that a lot to ensure nothing snaps ...
I have a 2019 Ford Mustang GT Performance Pack 1 .. Upgraded suspension and Brembo big brakes..Michelin P Cups.. Im interested in it becoming a 9 second car. This video starts off with a stock 5.0..So do I have an advantage cost per dollar to achieve this goal?
Not at all
If nothing else you're starting with a heavier vehicle. Brakes, shock tower brace, k-brace, wheels, all that other stuff. PP1 wheels I BELIEVE are the heaviest stock wheels Ford offers on the S550.
This is about building as street race car.
What would this set up cost realistically 20k? Or more?
Very Close, Checkout the link for a build sheet www.steedavehicles.com/#/drag-pack-mustang
Are these parts improvements for 2019 GT 350? I am not sure if the GT350 vs. the GT situation. Thank you
Absolutely yes they are ... the majority of parts discussed will improve a GT350 as well...
Bro ur car is designed to turn and stop not kiddy play like just going strait..
@@gigi9467 thats why Steeda make great parts for the track and street too
SoundBoy808 i know i have a bunch am just saying that this cara wer design for road course not drag like the old days.
ruclips.net/video/gDzLScv8EJk/видео.html
ya should build a galpin rocket mustang i love those
Has anyone calculated the cost of this full build?
Well I can tell you the lighter brakes and the carbon fiber is really expensive
Haha, might be cheaper to trade for a GT500
@@woohunter1🤣
The full cost of the build totals $43,000 but, it’s super fast
Daily friendly?
No lol. Yes you can daily but you can’t have best of both worlds comfortably atleast
Bottom line would be to find a nice used 2011-2014 6R80 car and install a 10R80 trans. No need to fool around with that IRS.
itsjusta6 did a twin turbo stock 6 speed stock motor and runs 9 every time
When did this happen? His black is supercharged and his turbo gt350 has never done a dig at the strip.
Basically buy a stock Mustang from dealership and replace the factory suspension with Steeda parts
It's crazy how capable these Mustangs are out of the box with just a few select parts!
We all heard him say stage 3 na cams
So, to make your Mustang go 9's NA:
Spend $10,000+ on CJ intake, TB, CAI, special order camshafts, (Because Stage 2 Comp Cams is all you can get for Gen 3 coyote) suspension, tires/wheels, lightweight brakes, hood, trunk lid, etc etc etc.
Got it.
What is the weight of the car? Thanks for all of the NA info.
Hello forcedair 92gt We got it down to 3,360lbs
@@steedaautosports Wow
Steeda that is insane , that’s Supra weight .
@@steedaautosportswhat does one need to do to get it at that weight ? 🤔
Kaya Godz they have a full build breakdown in the description.
What did this car Dyno at?
I’m guessing 600 rwhp - weight would be interesting too.
It's dyno'ed at 571rwhp
@@BruceLee-sw4ms it's roughly 3350lbs
I know he said they first used the 4.09 rear end gears and then he said they tried all number gears. He didn't say, unless I missed it, the gears used for the best pass of 9.94?
Hi Armando 3.15 gears were used for the 9.94 pass.
@@steedaautosports first or second gear leave? What tire size?
@@matt6951 first gear leave with a 315/45/17 rear tire
Hey! Curious how are you guys are running the exhaust dumps and how back pressure goes? Is it bullet style mufflers on it if so which ones?
@@BroncoDuke11 Bullet style ones we had laying around in the shop.
Well even though you won't look at this you should have gone with a kirkey seat
Trying to keep things somewhat comfortable, as this car does see street miles!
yall sell that carbon fiber hood
We do! www.steeda.com/anderson-ac-hd18fdmu-oe-ds-s550-hood
Yep soon enough ill be putting on 10k of mods on my 2019 5.0 PP1 magneride, 10r80 . All steeda mods, besides camber plates for front i went with maximum motorsports (because they have the top brace plates with there logo on them ) , Ill be using corsa extreme active exhaust with their 1-7/8 headers . Most important thing is i can give 2 fuks whos car is faster or lighter or this or that. What i do know is i like my car a lot for what it is. And i dont have to spend 50% + of take home pay like most people do on their sport cars. But cant take money with us when we die so f it.
Lol what’s left on a stock Mustang? Steeda has at least $50,000 engine & suspension mods
Um yeah, if you're trying to build the fastest car in a specific category then you have to spend money. When you move out of your mom's house and start paying your own bills you might realize that some day.
@@vxer1000 ass hurt
@@mogulme6190 we don't want to know about the time you ran out of Preparation H.
@@vxer1000 I was referring to the story you told about having that item removed from your rectum. 🙄😑
50k including the price of the car maybe lmao. All they really did was tires/suspension, weight reduction and basic bolt ons with a tune which in no way equals 50k into the car. You could buy a 18+ GT with 10r80 for about 30k and then do a 8k whipple and another few thousand on supporting mods and have a car just as fast at full weight. When you start getting into Anderson composites hoods/doors/trunk that can run you another few thousand but also is not necessary.
Who is Steada I neverever even heard of then it's just another mustang
CHRIST
Senna like a lot of money when you could of just put a super charger on it.
5 min video would of been great
#MYViBE
They never even said what the weight of the car was
3,350 lbs!
@@steedaautosports thank you
Love your product and this is a great presentation BUT
When you are talking sense the music is UNNECESSARY .
Think Do your. customers have enough noise in their lives ?
They don’t need generic rock music .
So basically spend $50,000 for Mustang and another $15,000 on parts
Hey Danny - A base model GT like the Silver Bullet can be had for the low $30k range if you play the manufacturer rebates right. That's a pretty good deal for 460 horsepower right out of the box. -Chris
Just get mk5 Supra downpipe tune runs low 10s with pure turbos upgrades and tune runs high 8s stock motor stock trans .
@@bman1668 🤣😂 no
@@bman1668 down pipe and tune Supra’s don’t run low 10s bro.
@@mogulme6190 I meant night 10 low 11 lol 😂 yes it does go check
istillloveyouMONiCARHONDAALRiGHTJENNiFERTooYOUSHOULDNOTDieBUTYALLWASBiTCHIZTOERiKAiMO
What is a second faster then at Shelbyl who cares
Scott Boda sounds like Trump talking about race cars.
More road course stuff less straight line come
On its 2020..
Yeah because road course is 2020 new lol. Go watch circuit videos if you don’t like this
@@mvc2177 to ppl
Like you yea definitely seems like 2020 lol go fix your pos german car which am sure has the check engine lights on lol
Sweet