Saving for a borla now. Your video was helpful as! How long did it take to install? Also, when you say "tighten everything to 35 ft pounds". What does that mean?
Thanks! I’m not completely sure if it fits the 2021 DCT model, I know for the intakes and intercooler the DCT models are a bit different, I’m not sure about the manual tho, it should fit but don’t take my word for it, if I were you I would contact borla directly and ask them to confirm the fitment on your car!
I just bought a veloster N and I really like your side skirts. My side skirt has a fluorescent red stripe running through the middle of it. Where did you get these side skirts? I love them.
@@chrizzz619 Thank you for that info. Can I ask you another question? I like your “N” on your side skirts. Did you paint those “N”s on the side skirts or did you buy an emblem or badge and glue it on there? If you bought them, do you remember which store you got them from?
@@davidibts1773 they’re decals! I got them from this guy in the N forums, I’m not sure if he still sells them or not, I’ve seen other people also put the “N” badge from the floor mats and just use 3m tape
Hoping you see this! When mine is not in N Mode the valve is not closed all the way and if I rev the car it closes the valve and has a rattle. N mode is completely fine and wide open. Do you think the exhaust shop did the valve backwards somehow or is that not possible? THANKS!
No this problem is actually common! On mine it does the same thing, if it’s on the “valve closed setting” it only closes when the car gets revved, some people have fixed the rattle by replacing the spring with I believe is a hellcat valve spring, can’t remember exactly which one at the moment.
After seeing a video of an N with a single exit sounding amazing do you think it would be possible for an exhaust shop to make a single straight pipe from the mid pipe? Not trying to cut or weld anything because of the warranty and resale
Why would you want a single exhaust exit lol? Dual exhaust exits help the engine breath much better and allow exhausts to flow out of the pipe better. You will lose power which i’m sure your not looking for right? Plus dual exits look much more clean and have a better overall look imo but you do you.
I didn’t try it! Haha I’ll try and find the dimensions for it and let you know, if not you can always take out the parts and put the exhaust down the middle by the armrest it shouldn’t be in your way
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I am getting ready to install the Elantra N version of this system, and your video cleared up some questions I had. Thank you!
great video! about to order it for my Kona just wanted to get an idea on the install..very clear thank you!
I just installed my Borla on my 2020 VN and used your video as a guide, thanks a lot!
Great video! Straight to the install, very simple. Replace those harbor freight jack stands though
Hey what's happening I've purchased a 2020 Hyundai veloster turbo r spec would they've that borla exusat for my car 😊😮😢
Very sweet install
Saving for a borla now. Your video was helpful as! How long did it take to install? Also, when you say "tighten everything to 35 ft pounds". What does that mean?
We’re you able to get the tips straightened out at all?
Can you link the exact borla system you purchased? This sounds amazing !
Yea for sure! I got it from SoCal garage’s website
scgarageworks.com/product/borla-exhaust-for-the-2019-2020-hyundai-veloster-n/
I'm really disappointed with the alignment. Or fittiment. Sounds amazing. But my one side stick out. Sucks. My ocd is killing me abit
OCD? you drive a 3d lmao that was tossed out the window a while ago
@@Ds.s197 lmao I still can't get over how I drive a car that has a long ass door and two tiny ones
@@visualsofisa😂
Where’d you get the N performance Wing
If you have an Instagram feel free to message me and I’ll send you the guys profile, my Instagram is chrizzz619
luv ur channel. I gotta ask will this Borla exhaust fit my 2021 VN or just 2020??
Thanks! I’m not completely sure if it fits the 2021 DCT model, I know for the intakes and intercooler the DCT models are a bit different, I’m not sure about the manual tho, it should fit but don’t take my word for it, if I were you I would contact borla directly and ask them to confirm the fitment on your car!
@@chrizzz619 will do! thanks for the input bro, ur vn is lookin more mean every update u do. love the wing spoiler
@@therealjulez7886 look out for more stuff coming soon! Thanks for watching! 👍
I just bought a veloster N and I really like your side skirts. My side skirt has a fluorescent red stripe running through the middle of it. Where did you get these side skirts? I love them.
I actually just used plasti dip to paint them black
@@chrizzz619 Thank you for that info. Can I ask you another question? I like your “N” on your side skirts. Did you paint those “N”s on the side skirts or did you buy an emblem or badge and glue it on there? If you bought them, do you remember which store you got them from?
@@davidibts1773 they’re decals! I got them from this guy in the N forums, I’m not sure if he still sells them or not, I’ve seen other people also put the “N” badge from the floor mats and just use 3m tape
Hoping you see this! When mine is not in N Mode the valve is not closed all the way and if I rev the car it closes the valve and has a rattle. N mode is completely fine and wide open. Do you think the exhaust shop did the valve backwards somehow or is that not possible? THANKS!
No this problem is actually common! On mine it does the same thing, if it’s on the “valve closed setting” it only closes when the car gets revved, some people have fixed the rattle by replacing the spring with I believe is a hellcat valve spring, can’t remember exactly which one at the moment.
After seeing a video of an N with a single exit sounding amazing do you think it would be possible for an exhaust shop to make a single straight pipe from the mid pipe? Not trying to cut or weld anything because of the warranty and resale
Why would you want a single exhaust exit lol? Dual exhaust exits help the engine breath much better and allow exhausts to flow out of the pipe better. You will lose power which i’m sure your not looking for right? Plus dual exits look much more clean and have a better overall look imo but you do you.
@@kemosabbee2448 I seen the video with the single exit too it just sounds so good and I imagine it would be a lot cheaper these are almost 2k.
Does this exhaust have drone at low rpm’s? Cuz it’s loud af lol
Where’d you get the mudflats?
What’s the torque spec on the dp to mid pipe nuts
I just installed mine and it stickes out the same amount on the pasanger side on mine I thought it was me ig this is just how it is
Does this box fit in the back of the N? I’m about to pick one up and hoping it’ll fit back there haha
I didn’t try it! Haha I’ll try and find the dimensions for it and let you know, if not you can always take out the parts and put the exhaust down the middle by the armrest it shouldn’t be in your way
What's that tool called you use for the hangers to pop it out?
It’s a exhaust hanger removal tool, I put a link in the description from Amazon where I got it from :)
Also if you have WD-40 you can spray it on that and it will slip right off
why does the muffler only do one side? main reason why I wont purchase
What downpipe are you using...or is it stock?
It’s the stock downpipe
@@chrizzz619 Is this a 3inch unit?
@@cindysue5474 yes it is! It’s a 3 inch unit with 5inch tips!
@@chrizzz619 Match that with a 3 inch down pipe and 200 cell count cat you will pick up some good numbers there.
@@cindysue5474 got that exact setup. Didn’t really feel a difference in power.. however it does shoot flames after a few hard pulls
Will it work on a Hyundai Venue😂