Aquila Pro Part 3

In this video I go over Printing with the Voxelab Aquila Pro.
This is not a sponsored video; I purchased this printer myself. Please check out parts 1 & 2 of this video series.
Also check out Etsy page www.etsy.com/s...
You may reach out to us for custom print jobs through our Etsy page or through RUclips.

[@rickytarkington2780]

I’m just getting started … do you have a video on design…. Making your own …. Parts in my case for a model idea …

[@edwardmcrichy2985]

I do not. But I would recommend the channel Product Design Online if it's fusion360.

[@brandonparris3656]

Hey bud, I need some help. My prints on my Aquila Pro have been printing weird. At a certain point the printer stops extruding but it continues moving like it’s print. Also, any profile tips for voxelmaker?

[@3dprintablesllc271]

Hey man sorry I didn't reply sooner. I don't monitor this channel as much as I should. Sounds like you are experiencing heat creep which is causing jams. One thing you can try is to do the mod from this video ruclips.net/video/B2KEzF1ZzTU/видео.html you would need some ABS or PETG, this has helped me a little bit but adding a more powerful hot end fan has also helped. You could also give this a try, haven't tried it but looks like it could help www.amazon.com/dp/B09JVQPDFM/?coliid=I3S9WGJLXV5FB&colid=2Z02LJ75C3KQD&psc=1&ref_=lv_ov_lig_dp_it . In the meantime, if you remove the stock PTFE tube from the hot end, check to make sure the end of the tube has been cut straight, then reinsert it and push down all the way to make sure it hits the nozzle.
For Voxel Maker I would start with the default PLA profile, then choose to "customize" at the bottom of the dropdown of the profile menu, it should keep the stock settings then you just make changes from there. I would avoid changing any of the settings in the stock profile, that way you have the stock profile unchanged. Whenever you have a new material, and you want to create a new profile always start with the stock profile then choose to customize, then make your changes.
Let me know how it goes. I will try to monitor this channel more often.