In this video I go over how to add a model, slice and print in VoxelMaker. VoxelMaker is the slicer that comes with the Voxelab Printers. You can download VoxelMaker here: www.voxelab3dp...
Happy to have found your channel! I really like the Voxelab printers. I have three of them now (Aquila, Aquila x2, Aquila x3). I have other brand printers and some custom ones, but my day to day use printers are my Voxelabs. I am very much looking forward to your video on sequential printing. I have never tried it, but would like to for a specific project I am working on. I am going to try a few things tonight just for fun. Anyway, nice seeing other Voxelabs out there. Have a good one!
Hi, thanks for the video. So to colour change would i use variable layers and change there? also is there any other slicers compatible with aquila pro? Thanks
You can't do a color change with voxelmaker unfortunately. I would recommend Orcaslicer, create a printer with the built in Aquila x2 profile, then change the bed size and follow this video to finish the setup ruclips.net/video/pJBOIX33jlo/видео.htmlsi=EFrifbw8rvqaT-ZT guy is using Cura in the video but he is just showing printer settings, I find Prusaslicer and orca slicer easier to use and just better overall.
Not sure I totally understand your question, if you bring the sliced file into the slicer, as far as I know it only shows the sliced file and gives you no options to reslice. I think you would have to have the original file.
![CHILE vs. BRASIL [1-2] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/5ObJt_71AYc/mqdefault.jpg)
I recently purchased a Volxelab Aries as my first printer and these Voxelmaker tutorials have been very helpful! Thank you!
Happy to have found your channel! I really like the Voxelab printers. I have three of them now (Aquila, Aquila x2, Aquila x3). I have other brand printers and some custom ones, but my day to day use printers are my Voxelabs. I am very much looking forward to your video on sequential printing. I have never tried it, but would like to for a specific project I am working on. I am going to try a few things tonight just for fun. Anyway, nice seeing other Voxelabs out there. Have a good one!
thanks for the comment. I also found the X2 to be very good for the low cost.
I was wondering if you can do a video on PETG settings I have a Voxelab Aquila x3 Thanks.
Again, brill. Thanks 👍
Thanks
Hi, thanks for the video. So to colour change would i use variable layers and change there? also is there any other slicers compatible with aquila pro? Thanks
You can't do a color change with voxelmaker unfortunately. I would recommend Orcaslicer, create a printer with the built in Aquila x2 profile, then change the bed size and follow this video to finish the setup ruclips.net/video/pJBOIX33jlo/видео.htmlsi=EFrifbw8rvqaT-ZT guy is using Cura in the video but he is just showing printer settings, I find Prusaslicer and orca slicer easier to use and just better overall.
@@3dprintablesllc271 Spent hours looking yesterday but couldn’t find anything. Thank you I will give this a try 🙏🏻 🙏🏻
@@BadBoyTurnz lots more videos on those slicers than Voxelmaker, good luck
How would you print at 0.16 and 0.12,do u just change layer height only?
Yes just change the layer height, you may also need to change the first layer height as well though you could just stick with the default
Would you know how to pause at a specific layer for a color change?
Sorry I didn't see your comment. As far as i'm aware you can't do that with this slicer. I would recommend Orca Slicer to do something like that.
Where do you put the filament
Sorry I don't understand your question. Are you asking how to add more filament profiles? Select custom profile to begin see 50 seconds into the video
Can you resliced a file that has been sliced and if yes how?
/
Not sure I totally understand your question, if you bring the sliced file into the slicer, as far as I know it only shows the sliced file and gives you no options to reslice. I think you would have to have the original file.
how can we add gcode to voxelmaker?
As far as I know you can't add G-Code using voxelmaker. It's a very limited program. What are you trying to do?
drag the Gcode file from the folder into VoxelMaker, and you can send to the printer
ta dando muito erro