Always watch all the video footage, hit like and leave a comment. Tinman gives us a lot of information and his time. Please show him some return love,it cost nothing but means a lot for the channel. Thanks ♥️👍
Outstanding video and content!! As I was watching and thinking about Caleb , cutting in that brutally hot environment in Texas, I was thinking about which pipe would be the best at pulling heat away from that saw!
Thanks Tinman very neat to see how those pipes work side by side I like the 460’s I don’t have one I run a stock 661 with a bark box but I would love to play around with some pipes on it
Dude that coyote pipe is beautiful! Love it Tinman! Im getting all of my saws geared up for summer time. My gramma has 40 acres and a TON of trees to thin out, also some giants running down the driveway that my ported 460 is gonna eat (as long as i didnt do anything wrong porting it hahaha!) Fingers crossed!!!
Do you think that maybe the Y pipe cools better? I mentioned that because the curved pipe was RIGHT THERE with it on the first cut; the hotter the saw gets, the more it loses some power; a pipe that keeps the saw cooler will win on the subsequent cuts/dyno pulls in my experience. I've added a thermocouple to my dyno to check temp of the saw's cylinder with different exhausts and there is an astonishing difference. Thanks for the video.
Loud pipes saves saws💪 Try switching the filler caps on your can, the gray one has a marker for chainlube on it. I use the black one on gas, and the filler nozzle with my bar oil since it doesn't fit in the older small husqys
@tinmanssaws man, that's typical! Hopefully they'll give you a new black one if there's a husqy shop locally. The gas one works really great on mine, I've only spilled some when it's been standing in the sun and gotten some pressure buildup. Then I usually give it a quick pump to release it, and it's ready for another speedy & perfect fill
abc power products here in transcona might have them 32 inch stihl light wieght bar. Im in there all the time. Rebuilding my old 036 right from crank bearings all the way up.
@@tinmanssaws They have a 32 inch bar light wieght but because there stihl dealer it's 216 bucks. Then tax on that. Nothing is cheap anymore. Just came from there and asked if they have and they do.
There's nothing wrong with that saw if it puts wood in your truck. It's a bit heavy and underpowered if you compare it to pro saws of the same cc range. Apples to oranges really.
@@tinmanssaws so the 391 Stihl is kind of like the 460 husky is how I’m taking it? 460 is 60cc but it’s not a “pro saw” so that 391 is more of a homeowner model sounds like. I just see a lot of them for sale and most are cheap
These videos are golden when we want to build our own pipes. Thanks for the video!
Excellent video as usual sir, I love those old Stihl’s.
My favorite from that series are MS 260, 036, 044, 046 and MS660
Always watch all the video footage, hit like and leave a comment. Tinman gives us a lot of information and his time. Please show him some return love,it cost nothing but means a lot for the channel. Thanks ♥️👍
Thabks Mr Rutter
I always chuckle when I hear the she cuts eh part lol. Sending warm weather from Romania, we finally feeling the spring here.
Gotta love the comparison videos
Hi Tinman, thanks for sharing. 👍
Outstanding video and content!! As I was watching
and thinking about Caleb , cutting in that brutally hot environment in Texas, I was thinking about which pipe would be the best at pulling heat away from that saw!
Love my built 046... spins 15,500 out of the cut, haven't got the bawls to tach it in the cut yet 😂 Keep spreading the knowledge Tinman 👍💪😎
That saw sounds like sweet music to me!Great video
Thanks Tinman very neat to see how those pipes work side by side I like the 460’s I don’t have one I run a stock 661 with a bark box but I would love to play around with some pipes on it
Dude that coyote pipe is beautiful! Love it Tinman! Im getting all of my saws geared up for summer time. My gramma has 40 acres and a TON of trees to thin out, also some giants running down the driveway that my ported 460 is gonna eat (as long as i didnt do anything wrong porting it hahaha!) Fingers crossed!!!
The chrome pipe Definitely seemed to pass the eyeball test in my opinion.
Once again another interesting video. TC Mahalo Tinman 🤙🤙🤙
Do you think that maybe the Y pipe cools better? I mentioned that because the curved pipe was RIGHT THERE with it on the first cut; the hotter the saw gets, the more it loses some power; a pipe that keeps the saw cooler will win on the subsequent cuts/dyno pulls in my experience. I've added a thermocouple to my dyno to check temp of the saw's cylinder with different exhausts and there is an astonishing difference. Thanks for the video.
That may be part of the equation but on this test being how cold it was outside I don't think heat was much of an issue.
Loud pipes saves saws💪 Try switching the filler caps on your can, the gray one has a marker for chainlube on it. I use the black one on gas, and the filler nozzle with my bar oil since it doesn't fit in the older small husqys
The black one leaked really bad so I use the oil one.
@tinmanssaws man, that's typical! Hopefully they'll give you a new black one if there's a husqy shop locally. The gas one works really great on mine, I've only spilled some when it's been standing in the sun and gotten some pressure buildup. Then I usually give it a quick pump to release it, and it's ready for another speedy & perfect fill
Ironhorse pipe works really well for me, easy to build and nice throttle response and it feels more torque at mid range.
That pipe definitely cuts, I’d love to see what that pipe does VS my pipe I run on my saw
Accurate lawn and garden or boost lawn and garden in Winnipeg would be where I’d check possibly laramees in portage as well
It definitely likes to breathe! Wonder if the "straight pipe" were 1/4" larger, would the results have been more comparable🤔
Thanks for the video. Can you do a pipe on de makita.
I think it would be good if you tryed some side covers from Westcoast saws
The single pipe made the saw sound better but the other pipe did let it cut better.
What Husqvarna saw that you have built would be most comparable to this one?
372 big bore
How does the y -pipe compare to the rams horn?
Are you concerned at all with debri falling into such an open throat muffler ? Just curious . Thank you
No it's never been an issue
Wicked saw Tinman. Second pipe sounds better,, but the Y pipe seems to work better. Great video man! Keep em coming!
abc power products here in transcona might have them 32 inch stihl light wieght bar. Im in there all the time. Rebuilding my old 036 right from crank bearings all the way up.
I'll have to check there thanks
@@tinmanssaws They have a 32 inch bar light wieght but because there stihl dealer it's 216 bucks. Then tax on that. Nothing is cheap anymore. Just came from there and asked if they have and they do.
What’s the issue with a 391 Stihl. People say don’t buy it, why? What was so bad about that saw?
I’ve had a 391 for 10 years now they’re really sluggish. I’ve been wanting to put a pipe on it to see if it wakes up!
There's nothing wrong with that saw if it puts wood in your truck.
It's a bit heavy and underpowered if you compare it to pro saws of the same cc range.
Apples to oranges really.
@@tinmanssaws so the 391 Stihl is kind of like the 460 husky is how I’m taking it? 460 is 60cc but it’s not a “pro saw” so that 391 is more of a homeowner model sounds like. I just see a lot of them for sale and most are cheap
thats a nasty saw right there sounds great
How's the Tinman and family
I don't watch shorts...can't stand'em.
That pipe definitely cuts, I’d love to see what that pipe does VS my pipe I run on my saw