Thank you so much for this. I appreciate that you talk in layman terms. Some of the videos I have watched use lingo that assumes the watcher has already been doing this type of thing. I am working on learning Lightburn while my machine is being shipped to me so I can create a design or two before it even gets here. This was extremely helpful for me, so I thank you for your time in making this video! Now I am going to go search for a video that will show me how to make a straight line into a curved line!
Great video! I need one on how to set up test grids…not setting the arrays but where to start with speed and power. Mine are either scorched or charred. 🙏🏻
I was recently informed by multiple sources that lightburn will not link to a Falcon 2 directly with the USB jumper cable. You must transfer all code through the mini flash card. Is this accurate?
Clack, I saw s video where you made some acrylic keychains. Would you do anther video on doing things cutting and engraving acrylic? Thaks, I really enjoy your videos.
I have to start by saying; Your video is very insightful and we have watched it a few times and plan to watch again. Thank you for taking the time. However, I have to ask a few questions about the Iodes. We cannot seem to get them to respond the way you do and was wongering what we are doing wrong lol?
Just wanted to say I have learned a lot from watching your videos. Thank you for your time. I not sure if you know this or not but when I heard you talking about making triangles there’s a way to make them. You can use your polygon tool make a polygon and with it selected go to shape properties and there you can choose the number of sides and by choosing three sides will turn it into a triangle for you. Not sure if that helps but it may save you a few step when needing triangles
Just got the Longer 40w based on your high regards for Longer. My question is which version of lightburn do i need to buy? Seems like there is 3 version to purchase on their site based on on which equipment you have. Thanks!
@@TheClackShack okay perfect Thank you so much for getting back to me. It arrives tomorrow and I'm stoked to dive in. Thank you for all your help through your awesome videos.
Great video and very helpful to me as I have a Mira 9 on the way. Always enjoy the info you give and keeping it simple makes it so much easier for a greenhorn like me! Thanks again!
@TheClackShack thanks a lot I am new to this and enjoying the laser and it really helpful to have you and your videos. Do you know if either software has the ability to do spiral engraving on a vinyl record
Another question. Where can you find a honey comb that matches the 430x430? the one I bought is really useless. I really don't know what to set the machine on.
@@TheClackShack Thanks so much. Watching a couple of your videos have answered so many question I've had. Ordered the camera and I am starting on the drawings for a hood.
I got a new xtool d1 pro 40w I setup lightburn and entered the size of my work bed 930mm x 430mm and my home area bit when I hit home it will stop halfway I hit it again then it will finish can you help thank you for your time
There is a setting on the controller that limits max travel distance. I am not sure if you can change it in XCS or not. Here is the lightburn setting at 7 min 20 sec in this video, ruclips.net/video/kDFxKNvxsAU/видео.html
@@TheClackShack getting my engraver tomorrow, and setting it up this weekend z but I'm already deep into tutorials and i like yours. Thank you for doing it (in the end i went for the Atomstack X7 Pro + camera + air assist)
I'm new to engraving. Lots of industrial laser experience though. I like the idea of how you park out of the way of accessing the completed piece. I watched this video 4 times and still don't understand how you get to "park" . Can you elaborate please?
Any windows 10 machine will run lightburn. You can even buy some refurb Dell minis on Amazon for $125 that come with a mouse and keyboard. Just add a TV as a monitor
I really enjoyed the video, especially the camera part. Been wanting to get one and your explanation of what you can do sealed the deal. That will be my next purchase.
Thank you so much for this. I appreciate that you talk in layman terms. Some of the videos I have watched use lingo that assumes the watcher has already been doing this type of thing. I am working on learning Lightburn while my machine is being shipped to me so I can create a design or two before it even gets here. This was extremely helpful for me, so I thank you for your time in making this video! Now I am going to go search for a video that will show me how to make a straight line into a curved line!
I have several design videos. Node editing can be a lot to remember.
This was very informative. I will watch again while in front of lightburn to practice your techniques. Thanks
Glad it was helpful!
I thought I knew lightburn pretty well. I now know it better. Thanks Dave!. Good video
Glad to help
Very help Dave. Thanks for putting this video together. I learnt a heap. Rob.
Glad it helps... thanks
Nice little Lightburn primer - useful for me, for sure, as I am new to this software. Thank you.
Thanks, I hope it helps
Great video! I need one on how to set up test grids…not setting the arrays but where to start with speed and power. Mine are either scorched or charred. 🙏🏻
Coming soon!
Glad I watch your video it was a lot of help and got going real quick. Keep up the good videos
Thanks, glad it helps
I was recently informed by multiple sources that lightburn will not link to a Falcon 2 directly with the USB jumper cable. You must transfer all code through the mini flash card. Is this accurate?
If it is, it is a recent development. I ran my falcon on lightburn for a long time. I haven’t got one of the newer ones but don’t see why they would.
Clack, I saw s video where you made some acrylic keychains. Would you do anther video on doing things cutting and engraving acrylic? Thaks, I really enjoy your videos.
I will work on it. Thanks
Used Lightburn for a while but this video added things I have not used before but helps.
Thanks, glad it helps
thanks for the crash course. very helpful
Your welcome, glad you liked it..
I have to start by saying; Your video is very insightful and we have watched it a few times and plan to watch again. Thank you for taking the time. However, I have to ask a few questions about the Iodes. We cannot seem to get them to respond the way you do and was wongering what we are doing wrong lol?
I am assuming you mean nodes? Make sure the path is closed to be able to edit them. Many shapes are not closed by default.
Great video! I Learned a lot, Thanks
Thanks… glad it helped
Great and helpful video Dave, Thanks again!
Your very welcome..
Thanks for the info. Your videos are very helpful.
Thanks, glad you like it.
Just wanted to say I have learned a lot from watching your videos. Thank you for your time. I not sure if you know this or not but when I heard you talking about making triangles there’s a way to make them. You can use your polygon tool make a polygon and with it selected go to shape properties and there you can choose the number of sides and by choosing three sides will turn it into a triangle for you. Not sure if that helps but it may save you a few step when needing triangles
Actually hadn't figured that one out yet..thanks
+
thank you for posting this video. It gives me an idea how to make up a small plaque. Much appreciated
You're very welcome!
what camera would you suggest for a omtech 60W laser with a 20x28 bed
I use the same camera on all of my machines that are not equipped. I make a 3d printed or laser cut enclosure for it. amzn.to/4b9EZe6
Just got the Longer 40w based on your high regards for Longer. My question is which version of lightburn do i need to buy? Seems like there is 3 version to purchase on their site based on on which equipment you have. Thanks!
GRBL
@@TheClackShack okay perfect Thank you so much for getting back to me. It arrives tomorrow and I'm stoked to dive in. Thank you for all your help through your awesome videos.
I always worried a bout doing boxes in areas..that tip alone is extremely useful
Glad it helped
I am looking for something basic. How to draw a shape and then set up the machine/program from there.
There are lots out there
Great video and very helpful to me as I have a Mira 9 on the way.
Always enjoy the info you give and keeping it simple makes it so much easier for a greenhorn like me!
Thanks again!
Thanks… glad it helps
Great Video, thanks for covering the Atezr. Do you have a video on how to set up a camera? Type of camera and how to set it up and mount it?
You can search my videos, I have several different cameras that I have tried out. Here is one of them. ruclips.net/video/UjjdK8aUPKU/видео.html
@@TheClackShack Goodness, thanks for the quick reply. I also subscribed and left a thumbs up. Thanks for all the help.
Xtool comes with xcs would you recommend using xcs or lightburn? Also what is the difference of the two software thanks
XCS isn’t terrible but lightburn has some design features that you will eventually want.
@TheClackShack thanks a lot I am new to this and enjoying the laser and it really helpful to have you and your videos. Do you know if either software has the ability to do spiral engraving on a vinyl record
Thanks, very helpful for beginner
Thanks
Another question. Where can you find a honey comb that matches the 430x430? the one I bought is really useless. I really don't know what to set the machine on.
I use the Comgrow honeycomb with most of my machines. amzn.to/3OSgQAO
@@TheClackShack Thanks so much. Watching a couple of your videos have answered so many question I've had. Ordered the camera and I am starting on the drawings for a hood.
I got a new xtool d1 pro 40w I setup lightburn and entered the size of my work bed 930mm x 430mm and my home area bit when I hit home it will stop halfway I hit it again then it will finish can you help thank you for your time
There is a setting on the controller that limits max travel distance. I am not sure if you can change it in XCS or not.
Here is the lightburn setting at 7 min 20 sec in this video, ruclips.net/video/kDFxKNvxsAU/видео.html
That's amazing , just a couple of days after I asked you if you'd make one lightburn tutorial .. thanks 😊
Thanks, I hope it helps..
@@TheClackShack getting my engraver tomorrow, and setting it up this weekend z but I'm already deep into tutorials and i like yours. Thank you for doing it (in the end i went for the Atomstack X7 Pro + camera + air assist)
I'm new to engraving. Lots of industrial laser experience though. I like the idea of how you park out of the way of accessing the completed piece. I watched this video 4 times and still don't understand how you get to "park" . Can you elaborate please?
I set a manually location under the move tab and also set a return to location in the device settings. ruclips.net/video/G9Mh--nr_5E/видео.html
For a beginner, besides lightburn what is a must have for software,
In my opinion, lightburn is all you need
Hi what budget laptop would be good to start with
Any windows 10 machine will run lightburn. You can even buy some refurb Dell minis on Amazon for $125 that come with a mouse and keyboard. Just add a TV as a monitor
Thanks for the video, I'm just learning lightburn and it is way harder than xtool creative space. Would you share your art library? mine is empty
You can build it up over time. Many of my files are my creations and the logos of my customers. I even have some purchased files. I cannot share them
Very helpful video!
Thanks, glad it helped..
Very helpful! Thank you!
You're welcome!
My engrave is upside down and backwards. What have I done?
Check origin location
Thanks! Just received our P20 this week. Learning lots from videos.
how do you get the line/color bar at the bottom of the screen?
Activate under windows up top
@@TheClackShack what is it called?
@@padrebrook4596 layers I think
Does light burn work with Microsoft s mode
Not sure what a
S mode is.
Crash course is an ironic name for this video. lol. thanks for all the info. great video!
Never had it happen... it did this time
i review my setting multiple time but i can not get it to rerun to the start position what am i doing wrong?
If you want to have it return to a specific location. Set it in the “return to” box
@@TheClackShack i have the box checked and the position set tp x 425.0 and y 425.0. i have xtool d1 pro 20 watt
@@seanfreeman7029 that should send it to the corner opposite of 0-0
I will never be close to being a professional at lightburn, i can't get this program!!
It just takes practice and a bit of patience.
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
Thanks
I find it easier to have my objects in line mode when nod editing. Easier to see the nodes.
That is one option
I really enjoyed the video, especially the camera part. Been wanting to get one and your explanation of what you can do sealed the deal. That will be my next purchase.
Great users tutorial but not really for beginners and how to get started.
I guess its a matter of perspective..lol
Good youtube
Thanks…