Mr. Koubou, please take care as it's not a good practice to put the cable the same side of the motor pulley, I comment this as I can see you're perfectionist. Please recive my salutation from Argentina! thanks for sharing your quality jobs and tools.
Just finished mine. Great design, plans and performance. True, the first thing I did with it was sharpen a pencil, but many uses since. And its only been finished for a week
Felicitaciones! Todas sus creaciones tienen calidad profesional y artística!... Gracias por compartir sus sus conocimientos... Saludos desde Ciudad de México. 🖐️🙂🇲🇽
You work and make tools like a well oiled machine shop! Your tools are as good if not better than a lot of tools that are manufactured. You are absolutely amazing. Awesome video. 2 thumbs up! 👍👍
Fantastic work JSK. Thank you for sharing your great ideas and workmanship! I love your ability to perfect every part of your build process. Well done indeed 👍🏼.
Your work always cleaning and clearing, thanks for your efforts to help us... Please can you fitting sizes directly into planning when you get work on screen ..
I tumble on your channel by accidence and after watching two video I am very impress. You have some amazing hand made modification for your tools which blow me away. Wow. Thank you for sharing.
I'm not a woodworker, but when I see you working and see the final result, I want to have one too. Doesn't matter what kind of machine or device you make 😀👍
Maestro cómo siempre excelente trabajo , la perfección elevada al máximo nivel , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
Great project. I love it. Maybe I will build one myself, too. I do already have a disc sander, but a bigger one would be helpful. BUT: 2 things I would change. 1st: What will you do when the sandpaper is worn out? Wouldn‘t using velcro have been a better solution? Additionally I would alter the design of the front a little bit to make it easier to exchange the sandpaper. 2nd: You outsourced the power management to a seperate device which is engenious. But why do you mount the power strip then to the disc sander and not to the engine where the whole power management is outsourced to? This way you need a power strip on every new device you hook up to the engine device. The other way round each new device is freed of power management and therefore you only need one power strip… Great project. Thx 4 sharing. Greetings from Switzerland 🇨🇭
I fix my sandpaper with contact adhesive.When I want to replace worn sandpaper I heat it with heatgun and it comes off easily.Here in South Africa we don't get velcro backed sandpaper bigger than 150mm.My self built sander disc is 300mm across.
@@NotQuiteFirst I wouldn‘t advise that. On one side it would be a hassle to get the glue to stick to the old sandpaper (and you do not want the sandpaper to fall off every time you start sanding), on the other side it would probably not be flat anymore, so instead of sanding your workpiece flat, you would sand grooves into it.
Thank You for your awesome tutorials. Many beginners watch your tutorials and can not proceed with any of the tutorials because many of us do not know the name of the parts, therefore it is impossible to source the parts in our country. Example: Your disk sander has knobs, aluminum parts, bearings with special holders and so on. A list of the special parts name would be of GREAT help. If you have a supplier in your country a link would also be a good idea. I use a VPN server and I can shop in any country and inquire about international shipping. The most important part is a list of the non DIY supplies including nuts and bolts. Do you thing you could send me a list of the parts you used in this tutorials ? For your cooperation and understanding I thank you in advance. Best Wishes, Dirk
Bitte verzeiht, mein Englisch ist grotten schlecht deshalb auf deutsch - - Wieder ein super Video ohne nerfige Musik oder überflüssiges Gesabbel, danke dafür! Besonders gut gefällt mir an deinem Kanal das man immer als erstes sieht wie das fertige Objekt aussieht bzw. arbeitet. Da nicht immer Alles interesant ist kann man gleich entscheiden ob das weiterschauen sinnvoll ist. Ich freue mich schon auf das nächste Video! Mach weiter so - - - - - - -
Hello, very nice job! I already purchase and downloaded the plans, thank you! Could you please tell me the technical specifications of the electric motor you used? and also some other electronic pieces (fuse, variator, etc...) thanks
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I would be happy if you could share my video on your SNS.
The wave is big and the drawing is small
Tools beget tools, precision begets precision. Watching this channel is like watching the industrial revolution in (very clean) summary.
I’m always amazed at the inventiveness, precision and beauty that you incorporate into your work. Truly an inspiration.
While I am always impressed with the quality of your builds I am even more impressed by the quality of your plywood.
I wasthinking the same thing!
Mr. Koubou, please take care as it's not a good practice to put the cable the same side of the motor pulley, I comment this as I can see you're perfectionist. Please recive my salutation from Argentina! thanks for sharing your quality jobs and tools.
Thanks for the good advice！
Maybe a mesh cage over the pulley system.
Brilliant. Please make more tools using this motor. For example, a lathe, a belt sander, a drum sander, etc
You are excellent at making straight cuts by hand!
Как всегда, с чувством, с толком, с расстановкой. Руки золотые
Hands down the best cordless option
Just finished mine. Great design, plans and performance. True, the first thing I did with it was sharpen a pencil, but many uses since. And its only been finished for a week
Heh George are you n the UK? Did you source all the hardware in the UK? If not in the UK where did you source them from? Cheers in advance.
Oops, I'm not in the UK, but US
@@georgedennis2719 Hi George: How do you manage changing the sandpaper? thx
@@djl9731 I get adhesive backed disks from Klingspor. Peel and stick. To get them off a little blast with the hair dryer softens the glue
Я смотрю ваш канал больше 10 часов и не могу остановиться 🙏🙏🙏👍👍👍💪💪😂😂😂
That is exactly the same as mine the only difference is I bought mine. You are a true craftsman
製作過程がいつも綺麗で美しので手先に見とれてしまいます❗️
We zien natuurlijk niet alles wat er aan vooraf gaat maar wat we zien is erg mooi en clean.
Ik geniet er elke keer weer van.
Felicitaciones! Todas sus creaciones tienen calidad profesional y artística!... Gracias por compartir sus sus conocimientos... Saludos desde Ciudad de México. 🖐️🙂🇲🇽
Thanks for the simplicity of the videos. You are creative and will now buy your products. I benefited from you a lot. My greetings
This build is exceptional work 👌👍
You work and make tools like a well oiled machine shop! Your tools are as good if not better than a lot of tools that are manufactured. You are absolutely amazing. Awesome video. 2 thumbs up! 👍👍
Вот так вот, раз и нет биения без доводки. Чудеса да и только.
You are an absolute genius!!!
Extraordinario tu trabajo!
Lástima que sólo puedo darte un like porque mereces MÁS.
Saludos desde Reynosa México!!!
It is absolutely fascinating what you come up with.
Very good ideas for the quality video and one job with professionalisme. Big respect for you. Tank you very much for one good moment in video.
Good work as usual. We shared this video on our homemade tools forum this week 😎
Una maravilla de trabajo...siempre es un arte su trabajo...felicidades
Fantastic work JSK. Thank you for sharing your great ideas and workmanship! I love your ability to perfect every part of your build process. Well done indeed 👍🏼.
Your work always cleaning and clearing, thanks for your efforts to help us... Please can you fitting sizes directly into planning when you get work on screen ..
Это всё, что вы делаете, только для видео, а не для работы. Но делаете красиво, смотреть приятно.
That 3D printer is awesome!
Чудная работа.
Скоро миллион подписчиков!!!
Заслуженно надо заметить.
These builds remind me to try using JB weld on more tap and die/welding tasks I'd otherwise put off/avoid.
Excelente. Felicitaciones desde Argentina.
Great built as usual.Wish I could lay my hands on that quality of plywood.
お疲れ様です🙇🏻♂️
登録者100万人おめでとうございます🎉
いろいろ勉強になります。
You are the master in this dojo! 😉
Obrigado , genio da criacao de maquinas qui nos ajudam no dia a dia ,schow
I tumble on your channel by accidence and after watching two video I am very impress. You have some amazing hand made modification for your tools which blow me away. Wow. Thank you for sharing.
Меня вдохнвляет ваша хитрость при создании всех этих приспособлений
What a guy! Love your work
I'm not a woodworker, but when I see you working and see the final result, I want to have one too. Doesn't matter what kind of machine or device you make 😀👍
I recognize that stuff! That's old school JB Weld - the best expoxy in the world!
Una payasada! Alardea de las herramientas! En su vida ha trabajado con ese taller!!😅🤣😜🤪👌🏼👈🏻
This is the best dish sander i ever seen...thank you for sharing
belt tensioner was genius
excellent job!!!congratulations...
it's cool
Always excellent quality work
Maestro cómo siempre excelente trabajo , la perfección elevada al máximo nivel , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
I suspect is the much better built that most store bought ones.
Magnífico. Peça de primeira linha. Copiei seu projeto, ficou show de bola. Parabéns.
Once again I'm reminded I need to buy a set of micro files. Nice way to put a smile on someone's face, Thanks.
Very nice display of woodworking and electronica skills.
Lindo trabalho, todos os seus projetos são perfeitos parabéns.
Amazing work as always! :)
Lijadora perfecta!!! Felicitaciones!!
Amazing what you can do when you have Thousands of dollars of equipment in your shop and you build a "Cheap" Disk Sander.. Wish I was so Poor.
@@donsmith3167 miss the point.
Oh dash! Looks like I have another project to do for my shed, thanks. A great machine and video. All the best from Australia
Felicitaciones por ese talento, pulcritud y estética en todos sus proyectos. Realmente eres un fenómeno en este arte.
Muy Buen Trabajo.
👏👏👏👏👏👏👏👏👏 Very great and beautiful 👍👍
Great design disc sander! Can you please share some details about the motor? What horse power do you suggest so it won't bog down during sanding?
Excellent! Arigato gesaimasu!
Looks great, but use the other end of the platform, where the disc moves toward the platform, not away from it.
Very Nice.
Great project. I love it. Maybe I will build one myself, too. I do already have a disc sander, but a bigger one would be helpful.
BUT: 2 things I would change.
1st: What will you do when the sandpaper is worn out? Wouldn‘t using velcro have been a better solution? Additionally I would alter the design of the front a little bit to make it easier to exchange the sandpaper.
2nd: You outsourced the power management to a seperate device which is engenious. But why do you mount the power strip then to the disc sander and not to the engine where the whole power management is outsourced to? This way you need a power strip on every new device you hook up to the engine device. The other way round each new device is freed of power management and therefore you only need one power strip…
Great project. Thx 4 sharing.
Greetings from Switzerland 🇨🇭
I fix my sandpaper with contact adhesive.When I want to replace worn sandpaper I heat it with heatgun and it comes off easily.Here in South Africa we don't get velcro backed sandpaper bigger than 150mm.My self built sander disc is 300mm across.
Just stick the new sandpaper on top of the old 🤔🤯
@@NotQuiteFirst I wouldn‘t advise that. On one side it would be a hassle to get the glue to stick to the old sandpaper (and you do not want the sandpaper to fall off every time you start sanding), on the other side it would probably not be flat anymore, so instead of sanding your workpiece flat, you would sand grooves into it.
Thank you for the pleasure of seeing your work👍👌
Thank You for your awesome tutorials. Many beginners watch your tutorials and can not proceed with any of the tutorials
because many of us do not know the name of the parts, therefore it is impossible to source the parts in our country.
Example: Your disk sander has knobs, aluminum parts, bearings with special holders and so on. A list of the special parts
name would be of GREAT help. If you have a supplier in your country a link would also be a good idea. I use a VPN server
and I can shop in any country and inquire about international shipping. The most important part is a list of the non
DIY supplies including nuts and bolts. Do you thing you could send me a list of the parts you used in this tutorials ?
For your cooperation and understanding I thank you in advance. Best Wishes, Dirk
Excellent project 👍
Best of best 👍👍👍👍👍
Very good, congratulations.
Fantastic 👍👍👍😊🌹
Muito lindo seu trabalho 👏😍
Excellent
A maestria nas mãos de quem sabe fazer, ensinar e produzir talentos para novos profissionais. Parabéns!
Awesome🤩🤩🤩
Disk sander table MUST be exactly in the middle of the disk !!!
Amazing bro 👍 👍 👍 👍
He is the master craftsman. Thank you for showing how jobs can be done so cleanly and with such precision.
Great design. Could you please make a drum or belt sander next?
Gracias por compartir tan buen trabajo.....es estupendo verle trabajar.....te relaja y siempre aprendes alguna cosa nueva.....
Very Nice
Sempre impeccabile !! Bel lavoro
めちゃんこ切れるノコギリですね…！これは良いものだ…！
あなたは素晴らしいです、私はあなたをとても尊敬しています、そして私はあなたのアイデアとあなたの仕事も尊敬しています！
Really amazing work, man! Well done!!! 😃
Stay safe there with your family! 🖖😊
Very good work but can you give more information about wood, engine, stick, materials you use. Thank you very much
bom trabalho
you are awesome, i admire you a lot and i also admire your ideas and your work!
sugoi desune🙂
No screws in the body? It’ll just fall apart from the vibrations
A million subscribers now.... going places !!
😎👍☘️🍺
Fantastic
Vc não vende essa lixadeira sem o motor?
Bitte verzeiht, mein Englisch ist grotten schlecht deshalb auf deutsch - -
Wieder ein super Video ohne nerfige Musik oder überflüssiges Gesabbel, danke dafür!
Besonders gut gefällt mir an deinem Kanal das man immer als erstes sieht wie das fertige Objekt aussieht bzw. arbeitet. Da nicht immer Alles interesant ist kann man gleich entscheiden ob das weiterschauen sinnvoll ist.
Ich freue mich schon auf das nächste Video!
Mach weiter so - - - - - - -
hola Y acá estamos...el video esta Genial.
Very nice
Hello, very nice job! I already purchase and downloaded the plans, thank you! Could you please tell me the technical specifications of the electric motor you used? and also some other electronic pieces (fuse, variator, etc...) thanks
Fantastic build.
Wonderful presentation. Please tell us about that vertical, cordless drill you are using. Make, model, etc.
wow wtf. you have a new subscriber
Parabéns já deixei o meu like 🇧🇷👊🤝👏👍🇧🇷💯
Did you make the electrical wires too? I wouldn't be surprised if you did after all that.