Thank you for making this to the point! #1 reason why I hate watching craft videos is because they take 25mins to do what you did in 5! Lol This was super helpful!!
I am wanting to make these types of signs but for outdoor decor as well. Any suggestions on how to ensure the vinyl stays protected and doesn't fall off?
Love your projects! I am searching for a way to do a wood sign that will be outside in the weather… Any suggestions for me? Thank you for sharing your talents with us, I have learned so much !!
Thank you do much ❤ i love creating signs for outside. I would suggest always sanding really well before working with your sign, use polly after to seal your project. Make sure to use vinyl 651...my videos all show step by step...Hope this helps?
I'm half way through your video. I still don't know how to get started. I have not made one single thing with my Cricut. Where do you suggest I start? All I wanted to do was make a cute sign with my business name on it to display in my booth. Thank you so much.
Oh no...hope you got it now? Basically create a image in DS and you can cut it out on vinyl (651 if you want it Permenant) and then use transfer tape to transfer your vinyl to your sanded board. Really important to make sure your surface is sanded
4:54 the letters are bubbling up in several places in the end of the video. How do you prevent that from happening? Especially if you plan to sell the signs. Thanks
After further looking, there are no places where the vinyl is bubbling up. What you see is light reflecting off the camera onto the white vinyl. But thank you for your comment
I see it too. You'll want to press the vinyl on in one direction, or from the center out to the edges so that it doesn't get pulled apart or pushed together.
Hi Solange, I used orical 651 and no I didn't put any sealant or anything over it. If they were going outside I would have put polly on it to protect it from the outside elements. Hope this helps
I have never sealed my boards. I use permanent vinyl so I've never had an issue. Now if you were to leave the sign outside in the elements I'd seal it with some kind of polly. Hope this helps
I do only if it's going outside. Polyurethane is what I use. I recently heard you should seal before putting on the vinyl, but I've always sealed after putting vinyl on
Hi Nichole, for these particular signs, I did not put anything over the letters to seal it. They were just for inside so I had no reason to. But if I was to put them outside in the elements I would have put polly over it. Hope this helps?
Honestly I use whatever is on sale at Menards, I don't have a specific type. But always always be sure to sand really well before doing anything with the wood. And I'm sorry I dont remember the measurements off hand, that project was created a long time ago.
Hi, welcome to my chsnnel. I use wood from menards and sad it really well before painting. I use a cricut maker, but there are so many vinyl cutters out there. I cut my wood with a saw and my vinyl to make stencils with my cricut. Hope this helps
Oh no! I’ve had this happen to me multiple times, and I know how frustrating it is, the only thing I would suggest or see it might be, is your wood is not sanded enough or if it was sand enough maybe it had too many pieces of particles on it after you sanded it.
Hi Alice, honestly I use whatever I have around my workshop. I don't have a personal preference. Just make sure you sand your wood really well before staining and if needed a little after lightly. I love the lighter stains because it brings the natural look of wood out. Hope this helps?
@@icreatecrafts8462 I’m looking for the font. I’m trying to write bride and grooms first names to go on pallette wood to place on easel outside the wedding room.
Thank you ;) these I did not mount, but if I were to, I would use sawtooth hangers with little nails on the back. I hope this helps and thank you for subscribing;)
Yes if you put any signs outside I recommend sealing them with clean poly. Orical 651 is suppose to last 5-6 years I think, but rain and sun will take away some of that time. Thanks for watching :)
Sorry to hear this, that is so frustrating happens to me more times than none. I think it's because your wood needs to be sanded better. I have never heard of stain being pulled up, I have had paint come off. Either way i would say it's because your surface is not smooth enough or your transfer tape is too sticky. Hope this helps
I purchase my wood. Mostly from menards. Round signs prices are coming down a bit. Otherwise I buy a 10 foot piece of wood and cut and router it myself. Hope this helps?
Welcome to the crafting club Joi 😃 I love making my own signs, that's what I specialize in, but branched out creating other things. I have the maker, but honestly I havent done much other than cutting vinyl and a dabbled a bit with fabric. I need to create more things using this awesome machine. I would suggest getting the maker because its the newest machine but it's the most expensive. I had the explore which was great, but one of the clamps broke on me so I upgraded to the maker. I dont want to influence you, but I would totally buy the maker, but wait for a sale. Hope this helps and welcome aboard 😉
Hi,no nothing to seal if it's not going outside. Orical 651 is a permanent vinyl. If it's going outside, I put polly over it to seal it from the elements. Hope this helps 😉
@@icreatecrafts8462 Hello. What do you use to seal it? I'm thinking about doing some signs for outdoors. And what did you use to stain the wood? Thank you in advance.
I tried to transfer my letters on to painted wood. No matter how hard I pressed on them...they would not leave the transfer paper. Is there a step I am missing. Do you have to rough up the wood?
Hi, did you sand your wood really really well before painting it? Sometimes when I didn't sand well enough my vinyl wouldn't stick. Are you using optical 651?
Ho Rosie, sorry to hear that, I was just creating a sign using orical 631 for a stencil. Did you sand it so it is really smooth with no hard rough spots? Maybe its not sticking because of the stain you used? What brand are you using?
@@icreatecrafts8462 Yes it was sanded well and I used minwax wood stain. I think it must have something to do with the stain because I did one with just acrylic paint and it stuck fine. I'm doing a test now by applying minwax polycrylic after staining and see if it will stick then.
I use acrylic or chalk paint, I have yet to try HTV, but out of the signs I made over the years and have kept them outside there has never been a problem.
Hi Charley, I just bought a board from Menards it was a 5x6 and it was only $5 something. Do you have a menards or home depot around you? I have never heard of the wood being so expensive
I always use permanent orical 651 for my signs. I was using craftable transfer tape it was strong, but expensive so I switched to a different kind. Here’s the link to what I purchase; amzn.to/2XKmVo1
The part where you put the stickers on the wood. I'm interested in getting a cricut but I want to fully understand how the process of getting it on the wood works before I go and buy it. I make wood projects and I think if I get I will love it. Thanks :)
@@csds7679 I know you would love a cricut, endless possibilities 😉 I'm sorry I went quick with that part, I will make you a special video showing you and others step by step how to create a sign using vinyl, how's that? If your not subscribed already please make sure you are and watch for that video. I'll work on it this week 😀
Oh no. I had thst same issue a few months ago. I sanded my wood so well, but no matter what the vinyl wouldn't stick. Is it sanded really well? And are you using permanent vinyl? I will get you through this ;)
@@icreatecrafts8462 it is sanded, painted and permanent vinyl and still doesn’t stick. I tried adding heat to it to make it “stickier” and when I tried removing the transfer tape it still wouldn’t stick to the wood 😮💨 it would come off with the transfer tape
Shoot. Like I said I had the same issue a few months ago, never happened before. I was thinking it was the humidity 😫 still not sure. I did try another board and it helped a ittle but was still having some issues. Man I wish I could suggest something else. Could you try a new board?
4:58 Wow a lot of lifting of certain areas of the lettering. I wouldn't charge someone money for letters tat aren't flat. I heard heat transfer is better..then obviously hand calligraphy as well
Thanks for watching and commenting. But it's the lighting that makes the vinyl look like they aren't flat. I agree I wouldn't charge someone for sloppy work, but this was mine to keep. All of the crafts I create, I keep. I just show people how to make things. I never said my items were perfect. And I also agree that hand written is better, but not everyone is talented to so that type.
Not that I know of, they all are clear. I was buying my transfer tale from the $1 store until I found out about craftables brand, I won't ever go back. A little pricy but it works great and you can reuse a bunch of times
I love your intro. I'm glad you see women in crafting and construction 🚧
Well thank you so much 🥰
I always wonder if anyone is ever glad to see Men in Crafts lol.
That's a very straight forward intro... I like it!
Thank you
Wasn't it? I had to laugh. Makes me wanna subscribe.
I hope you will hit that subscribe button ☺️
Thanks!! You make it seem very easy for the beginners
Awe thank you for saying that! So glad I could help. I have fun creating the tutorials. Let me know if you’d like to see something specific
Thank you for making this to the point! #1 reason why I hate watching craft videos is because they take 25mins to do what you did in 5! Lol
This was super helpful!!
Your so welcome, thank you for writing this message, you just made me smile from ear to ear 🥰
Girl swear! She got to the point. Thanks for keeping it simple.
Thank you! I need to rewatch this and create more to the point videos ;)
Amazing job Love it I watch all of your videos!!!!!!!!!!
Thank you so much Emma 😉
Short and sweet. Thanks.
Thank you 😉
Thanks for the video
Oldie but a goodie
Beautiful!!
Thank you! 😊
Thanks 😊
Hi and thank you for that I am new to cricket and I feel very intimidated and I can use it much help as possible thank you
Ill help ypu in any way i can 😉
I Love these!! Thanks Jen
Thanks Jody!
I am wanting to make these types of signs but for outdoor decor as well. Any suggestions on how to ensure the vinyl stays protected and doesn't fall off?
Beautiful
Thank you
Super helpful! Thank you!
Your welcome 🥰
What kind of viynl did you use? - also, do you seal it at all to prevent the viynl from peeling off the wood over time
I use orical 651 its a permanent vinyl. I fo seal my work, lots sat not to but I always do. I use polly to seal. Hope this helps 😉
Love it!
Thank you
Did you seal the stain before applying the vinyl?
Great video very educational. Can you put a protected coat on top of the font? Thank you
Thank you so much ❤️ yes if its going outside I usually put a coat of polly on it. Light coat. You can get the spray kind or the brush on.
This was so helpful!!
Thank you Jessica
Really great
Thanks
Love your projects! I am searching for a way to do a wood sign that will be outside in the weather… Any suggestions for me?
Thank you for sharing your talents with us, I have learned so much !!
Thank you do much ❤ i love creating signs for outside. I would suggest always sanding really well before working with your sign, use polly after to seal your project. Make sure to use vinyl 651...my videos all show step by step...Hope this helps?
I loved your intro! Great video! Thanks for sharing! New subscriber here!
Thsnk you 😍 i know who you are i love your videos thanks for subscribing
@@icreatecrafts8462 thank you! I love making friends with other Cricut RUclipsrs 🥰
Hi
What kind of vinyl did you use ? Permanent or other one
Do you seal your signs? If so what do you use?
Good question. I do not seal my signs, unless they are going outside, then i seal them with polly. Thanks for asking 😉
Hi. Great work. Thinking of buying a cricut. Can you spray gloss over the letters?
Yes, absolutely but if you’re using permanent vinyl I wouldn’t because it takes away the adhesive. But I have in the past
Love this craft! One question I have are all three boards connected together for hanging or are they each freestanding? Thanks.
Hi Rosalva, they are not connected together. You could if you wanted but mine are not 😀
Love these, I might even be able to do them....
Beautiful, Love it! What measurement you use for the wood?
Thank you Shay 🌹 I don't recall the measurements, sorry. And I don't have these signs anymore I donated these signs for a benefit.
I'm half way through your video. I still don't know how to get started. I have not made one single thing with my Cricut. Where do you suggest I start? All I wanted to do was make a cute sign with my business name on it to display in my booth. Thank you so much.
Oh no...hope you got it now? Basically create a image in DS and you can cut it out on vinyl (651 if you want it Permenant) and then use transfer tape to transfer your vinyl to your sanded board. Really important to make sure your surface is sanded
4:54 the letters are bubbling up in several places in the end of the video. How do you prevent that from happening? Especially if you plan to sell the signs. Thanks
@@icreatecrafts8462
where can I buy that paper and sticker
@@SuperLeigh24 it's not paper, it's orical 651 vinyl it's sticky on one side. Hope this helps
After further looking, there are no places where the vinyl is bubbling up. What you see is light reflecting off the camera onto the white vinyl. But thank you for your comment
I see it too. You'll want to press the vinyl on in one direction, or from the center out to the edges so that it doesn't get pulled apart or pushed together.
Pretty Js' Channel Where can I buy that transfer tape
Love your videos. Is that vinyl waterproof?
Thank you so much Lisa ❤️ I use polly to seal my signs so yes they are waterproof ;) thanks for watching
what are you printing the letter to just plan paper
The lettering is vinyl, 651 permanent vinyl. Hope this helps?
Why type of vinyl did you use and did you put anything over the vinyl once you laid it on the wood?
Hi Solange, I used orical 651 and no I didn't put any sealant or anything over it. If they were going outside I would have put polly on it to protect it from the outside elements. Hope this helps
Don't you have to seal the letters because they will fall off the wood if you don't no?
I have never sealed my boards. I use permanent vinyl so I've never had an issue. Now if you were to leave the sign outside in the elements I'd seal it with some kind of polly. Hope this helps
hey jen! is It the same thing if I just buy finshed wood already from Micheals and then just customized the sign
Hi Houssam, it's all on how you want to create it. It would be the same, I just choose to work with the wood myself. Have fun creating 😀
Do you seal your projects after you add the vinyl?
I do only if it's going outside. Polyurethane is what I use. I recently heard you should seal before putting on the vinyl, but I've always sealed after putting vinyl on
So what type of wood is that? I'm new to this so am clarifying.
I buy all my wood from Menards, honestly whatever is cheapest is what I buy. Just make sure you sand first really well
Can you tell me what that font is that you used?
I wish I could. Sadly I created that a few years ago and I don't remember 😕
Did you put something over the signs after you were don’t with the letters? Like a seal cover?
Hi Nichole, for these particular signs, I did not put anything over the letters to seal it. They were just for inside so I had no reason to. But if I was to put them outside in the elements I would have put polly over it. Hope this helps?
When you made it did you mirror the svg ? when I make shirts i mirror it I’ve never made anything else I’m curious
Nope, only mirror when you are using HTV or for under glass...Hope this helps :)
Love! What kind of board do you use and the measurements please?
Honestly I use whatever is on sale at Menards, I don't have a specific type. But always always be sure to sand really well before doing anything with the wood. And I'm sorry I dont remember the measurements off hand, that project was created a long time ago.
So you seal your wood signs at all?
I do seal them only if I plan on putting it outside. Hope this helps
What material is being used ? Iron on?
No just orical 651, permanent vinyl
Hi! Is it possible to print with color on wood with the cricut maker 3?
Omg great question, but unfortunately I don't have a maker 3 so I'm not sure what its possible of doung 😔
Great video! I would LOVE to know where you got your adhesive vinyl cheat sheet? I'm very interested in one.
Thank you 💖 sorry what adhesive cheat sheet? This was created a few years ago I dont remember
Loved it!! How long did u let ur stain dry for?
It's always different depending on temp (If doing outside or in your garage). I would say about an hour to be safe. It should be dry to the touch.
@@icreatecrafts8462 thank you!!! I cant wait to finish mine! 😀
@@alindarivera1900 your so welcome, if love to see your project when finished 😉
Which cricut is this ?
I use the cricut maker ☺
Hey there! What is the name of this font and where did you source it from please? Thanks!
Oh boy I'll have to look and see if it will tell me the name of the font. I created this so long ago I don't remember.
I Create Crafts That would be great! Let me know either way please! Much appreciated! 😉 #subsribed
@@brittanyconn7188 Sorry for the late response. I found it, but it wont tell me what font it is. I can send you the file if you would like?
I would love it if you can send me it please! Roxy_girl44@live.com
@@roxygrrl87 I'll look to see if I can send it to you...
Great video, thanks for sharing. What font did you use?
Thank you so much. And I'll have to go back and look if Design Space will show me the font. I'll let you know 😄
I Create Crafts thank you
@@denisegovea8742 I just checked and it wont tell me what font it is. I can try to send you the file or the pic if you would like?
I Create Crafts I love these fonts! Could you send me the file?
@@alainahcasas7645 i can try whats your email address?
Which wood do you use? And where can i buy the machine you cut the wood or can i buy any woodcutting machine.?
Hi, welcome to my chsnnel. I use wood from menards and sad it really well before painting. I use a cricut maker, but there are so many vinyl cutters out there. I cut my wood with a saw and my vinyl to make stencils with my cricut. Hope this helps
I did all of your steps with stain, yet the vinyl does not stick,stay on the wood. Would you know why?
Oh no! I’ve had this happen to me multiple times, and I know how frustrating it is, the only thing I would suggest or see it might be, is your wood is not sanded enough or if it was sand enough maybe it had too many pieces of particles on it after you sanded it.
What machine do you use I am looking to buy one and start making signs to sell at craft markets
Oh you'll have so much fun 🙂 I have the Maker, I upgraded from the explore. Happy Crafting
Do you recommend a water based stain or oil base for using Cricut vinyl lettering? Also, what shade do you recommend? Your stain was beautiful.
Hi Alice, honestly I use whatever I have around my workshop. I don't have a personal preference. Just make sure you sand your wood really well before staining and if needed a little after lightly. I love the lighter stains because it brings the natural look of wood out. Hope this helps?
What is the name of the font !???
I wish I knew, I welded it so I cant undo. Shoot so many people have asked.
what program are you using to create your signs?
Design Space
What font is this?
Great question...sadly I dont remember and since I welded it it wint tell me. I'm sorry
I love this font style do you have a SVG you can recommend, Im trying to do a wedding sign. I am so new to all of this
Are you looking for a svg or font? I've created a few wedding signs 😊
@@icreatecrafts8462 I’m looking for the font. I’m trying to write bride and grooms first names to go on pallette wood to place on easel outside the wedding room.
@@lesleymills4383 Best place to find fonts is Dafont.com. I personally love i love glitter and Goldie Rainbow
Did you seal it with anything
No I do not seal my signs unless they are going outside. If I do seal them I use polly. Hope this helps?
What type of vinyl do you use . I can’t get mine to stick to the wood
I use orical 651 for all of my projects 😉 make sure your wood is well sanded before applying the vinyl.
Looks awesome. One question how are you mounting it ?? for example on a wall . Just subbed you to see more stuff
Thank you ;) these I did not mount, but if I were to, I would use sawtooth hangers with little nails on the back. I hope this helps and thank you for subscribing;)
@@icreatecrafts8462 Thank you . Check out my channel some time too.
Should you seal the vinyl if you are goin to put outside?
Yes if you put any signs outside I recommend sealing them with clean poly. Orical 651 is suppose to last 5-6 years I think, but rain and sun will take away some of that time. Thanks for watching :)
When I do signs the transfer tape pulls up a little bit of the stain so
It’s lighter why would this be happening?
Sorry to hear this, that is so frustrating happens to me more times than none. I think it's because your wood needs to be sanded better. I have never heard of stain being pulled up, I have had paint come off. Either way i would say it's because your surface is not smooth enough or your transfer tape is too sticky. Hope this helps
Hi what machinery do you use to make you woods? For straight and round signs?
I purchase my wood. Mostly from menards. Round signs prices are coming down a bit. Otherwise I buy a 10 foot piece of wood and cut and router it myself. Hope this helps?
what kind of wood do you use?
Honestly i just purchase whatever is on sale at Menards in 8 or 10 feet length.
May I ask what font you used?
I wish I knew, sadly I created this a few years ago.
Hi there. I was wondering what font you used?
Hi Pamela, unfortunately I had a few people inquire about this particular font, but I can't seem to find it.
Can you please email me your font at Joann.irguam@gmail.com
can you tell me which vinyl did you?
Just regular 651 vinyl. I purchase mine off of amazon. Hope this helps
I'm a beginner wanting to do this. I've been spending so much money purchasing each sign. Which machine should I get?
Welcome to the crafting club Joi 😃 I love making my own signs, that's what I specialize in, but branched out creating other things. I have the maker, but honestly I havent done much other than cutting vinyl and a dabbled a bit with fabric. I need to create more things using this awesome machine. I would suggest getting the maker because its the newest machine but it's the most expensive. I had the explore which was great, but one of the clamps broke on me so I upgraded to the maker. I dont want to influence you, but I would totally buy the maker, but wait for a sale. Hope this helps and welcome aboard 😉
Did you have to print the words mirrored?
Hi Lisa no it doesn't have to be mirrored since it's vinyl that I put directly on the wood 😉
@@icreatecrafts8462 thank you
@@lisaalexander8885 your welcome 😄
Do you put anything on the finish product? Like mod Podge ?
Hi,no nothing to seal if it's not going outside. Orical 651 is a permanent vinyl. If it's going outside, I put polly over it to seal it from the elements. Hope this helps 😉
Do you seal the top with anything?
I seal with polyurethane ;)
How much you sell them for ??
Humm...I haven’t sold anything for a while, but probably around $25
I’m assuming you do NOT mirror?
Yes, correct you do not want to mirror unless its HTV or going underneath glass...hope this helps
Where do you get yourself from the seal your letters on my letters keep coming off
I use polly to seal all my signs :)
hi.. can you share the name of the materials you have used?
You mean the vinyl and board?
Hi! Do you have to seal the lettering or anything?
The only reason I seal mine is if I leave it outside, otherwise I use orical 651 which is permanent. Hope this helps
@@icreatecrafts8462 Hello. What do you use to seal it? I'm thinking about doing some signs for outdoors. And what did you use to stain the wood? Thank you in advance.
Love the signs. Do you seal the wood that you stain before you put the vinyl on?
Thank you so much! I do not seal before or after. I know some do, but I do not.
Which stain you used
I'll go look to see if I still have it
Sorry I don't have this stain anymore. I buy them on sale when I go to Menards
Thanks for another good share I wanna win that bundle giveaway lol 😀
Which font did you use?
I will check in design space to see if I still have this file and I'll let you know 😊
Sorry Jennifer I didn't save this file 😣 it might have been butter cup which is a free font that is similar to Samantha font.
How do I get a logo to you.
Hi Isreal, a logo for what? For me to create you a vinyl decal for? Please let me know
What color did you stain it?
Sorry I dont remember I will check in the morning if I can find the color if I still have it
What kind of vinyl do you use?
Whatever brand is on sale on Amazon. I purchase 651 vinyl, its permanent. Hope this helps
Can you use iron on vinyl for this?
I think you could, but when I tried to use HTV on wood it got really soft and didn't stick, but I only tried it once
I tried to transfer my letters on to painted wood. No matter how hard I pressed on them...they would not leave the transfer paper. Is there a step I am missing. Do you have to rough up the wood?
Hi, did you sand your wood really really well before painting it? Sometimes when I didn't sand well enough my vinyl wouldn't stick. Are you using optical 651?
@@icreatecrafts8462 I'm using Orical 651 and my letters WILL NOT stick to a sanded then stained piece of wood.
Ho Rosie, sorry to hear that, I was just creating a sign using orical 631 for a stencil. Did you sand it so it is really smooth with no hard rough spots? Maybe its not sticking because of the stain you used? What brand are you using?
@@icreatecrafts8462 Yes it was sanded well and I used minwax wood stain. I think it must have something to do with the stain because I did one with just acrylic paint and it stuck fine. I'm doing a test now by applying minwax polycrylic after staining and see if it will stick then.
Humm...might be your stain then. I havent worked with stain much. Let me know the outcome of your test
Do you add polyurethane at the very end if it goes outside?
Yes only if it's going outside. I usually use spray polly 😉
It is the spray water based poly, thank you! Do you also spray the poly on after you stain the wood before you apply vinyl? Have you tried htv?
I'm not sure it's in the bluish/greenish can, I'll have to look. I spray after the vinyl is put on, ido use HTV but I have never tried it on wood
@@icreatecrafts8462 thank you. I was looking to use acrylic paint or htv for it to stay on longer.
I use acrylic or chalk paint, I have yet to try HTV, but out of the signs I made over the years and have kept them outside there has never been a problem.
What kind of wood do you use? I looked for plywood and it was 70-80$ for a 4x8' sheet! How can that be its ply wood!
Hi Charley, I just bought a board from Menards it was a 5x6 and it was only $5 something. Do you have a menards or home depot around you? I have never heard of the wood being so expensive
That was baltic birch you were looking at then. Way overboard for these. Get some pine fence boards or cedar planks and use those.
What kind of vinyl (permanent or removable?) and what kind of transfer paper (strong grip?) did you use?
I always use permanent orical 651 for my signs. I was using craftable transfer tape it was strong, but expensive so I switched to a different kind. Here’s the link to what I purchase; amzn.to/2XKmVo1
I like the video a lot but the part that I actually wanted to see she fast forwarded through it.
Which part was that? I'll be sure not to fast forward that part anymore
The part where you put the stickers on the wood. I'm interested in getting a cricut but I want to fully understand how the process of getting it on the wood works before I go and buy it. I make wood projects and I think if I get I will love it. Thanks :)
@@csds7679 I know you would love a cricut, endless possibilities 😉 I'm sorry I went quick with that part, I will make you a special video showing you and others step by step how to create a sign using vinyl, how's that? If your not subscribed already please make sure you are and watch for that video. I'll work on it this week 😀
Awesome, thank you so much! I'll subscribe!!
can i get the cricut to make that logo...
Which logo are you trying to create?
Go and thank your husband for pointing you out. Love this!
Awesome! I sure will. Be sure to subscribe if you haven't already, I have many more great how to craft videos coming
How do get a hold of information on how to contact you
Send me an email
Jen.icreatecrafts@gmail.com
will this work on the milwaukee logo?
Sorry not sure what you mean?
like the milwaukee tools logo
Sure...you can create anything
do i have to draw it out first or can i get off line..
There should be a svg file. If you google the Milwaukee logo and put svg behind it there should be one that you can use. Do you have a cricut?
So I did this exactly and my vinyl doesn’t stick on 😭😭 I’m trying to do a project for my sons baptism but it’s not coming out
Oh no. I had thst same issue a few months ago. I sanded my wood so well, but no matter what the vinyl wouldn't stick. Is it sanded really well? And are you using permanent vinyl? I will get you through this ;)
@@icreatecrafts8462 it is sanded, painted and permanent vinyl and still doesn’t stick. I tried adding heat to it to make it “stickier” and when I tried removing the transfer tape it still wouldn’t stick to the wood 😮💨 it would come off with the transfer tape
Shoot. Like I said I had the same issue a few months ago, never happened before. I was thinking it was the humidity 😫 still not sure. I did try another board and it helped a ittle but was still having some issues. Man I wish I could suggest something else. Could you try a new board?
Can you reverse weed and paint over your stencil?
@@icreatecrafts8462 yes! I actually saw another video of yours and im going to try that out! Thank you soo much
4:58 Wow a lot of lifting of certain areas of the lettering. I wouldn't charge someone money for letters tat aren't flat. I heard heat transfer is better..then obviously hand calligraphy as well
Thanks for watching and commenting. But it's the lighting that makes the vinyl look like they aren't flat. I agree I wouldn't charge someone for sloppy work, but this was mine to keep. All of the crafts I create, I keep. I just show people how to make things. I never said my items were perfect. And I also agree that hand written is better, but not everyone is talented to so that type.
You go to fast but maybe I'm just to new at this
Sorry about that, but I do have many more sifn videos more in depth. Hope they help you
Not a 'guy' should I not be watching?
?
is there different color transfer tape ?? I'm looking into getting an air 2
Not that I know of, they all are clear. I was buying my transfer tale from the $1 store until I found out about craftables brand, I won't ever go back. A little pricy but it works great and you can reuse a bunch of times