The PC inside a Car Wheel - Building the Daniel Abt Gaming PC - Part 2
HTML-код
- Опубликовано: 8 сен 2021
- Hetzner AX Special Offer:
derbauer.hetzner.com/en/speci...
---------------------------------------------------------
Support me on Patreon:
/ der8auer
---------------------------------------------------------
Save 10% on your iFixit purchase: DER8AUER10
eustore.ifixit.com/der8auer
Pro Tech Toolkit: bit.ly/2JOFD8f
---------------------------------------------------------
Find my products at Caseking:
Delid Die Mate 2: bit.ly/2Rhv4y7
Delid Die Mate X: bit.ly/2EYLwwG
Skylake-X Direct Die Frame: bit.ly/2GW6yyC
9th Gen OC Frame: bit.ly/2UVSubi
Debug-LED: bit.ly/2QVUEt0
Pretested CPUs: bit.ly/2Aqhf6y
---------------------------------------------------------
My Equipment:
USB- Microscope*: amzn.to/2Vi4dky
My Camera*: amzn.to/2BN4h2O
(*Affiliate Links: If you buy something, I will get a part of the profit)
---------------------------------------------------------
Music / Credits:
-
Outro:
Dylan Sitts feat. HDBeenDope - For The Record (Dylan Sitts Remix)
---------------------------------------------------------
Paid content in this video:
- MSI, Nvidia Partnership to build the PC, Hetzner Spot
Samples:
- MSI B550I Gaming Edge WiFi, MSI RTX 3080 Ti Suprim X, MSI A850GF, Corsair XC7 RGB, Corsair Dominator RAM, Corsair MP600 Pro, Corsair MP600 Core, Corsair QL Fans, Thermal Grizzly Riser Cable 
Наука
Find the results on Daniels channel: ruclips.net/video/HiTqfd-E0M0/видео.html
😲 WOW! Roman the end result is Wheely Awesome
950HP Nissan GTR ? sorry not watching your video I'm watching his instead, got to have standards you know high hp car > pc
I got the english video recomended first, this new channel is working 😁
i only know daniel abt from paying a driver to drive for him in some virtuel formula e event and him pretending he was driving
And been fired by AUDI after !
Daniel Abt is an professional race-driver, he was driving in the DTM and Formula E and is the son of the famous founder of Abt Motorsport (a motorsports-company with many victories and the worlds biggest tuning-company of Audi vehicles). When that online-event happened (it was NO official competition), he made a challenge with an professional E-Sports driver and let him drive. He even said that openly in his online stream then and still got fired by Audi, even during the fact that most of the other drivers didn't care much, since it was a fun-event and the won money were donated. Still... Audi decided to kick him out of the Formula E but that never affected their relationship when it comes to Audi and Abt as a brand. Daniel Abt is a nice guy... never judge someone by one thing that has been pushed by the media.
@@sonatine3266 he didn't admit that before or during the event, only after. And he tried everything to cover it up not turning up to the post race interviews blaming it on 'connection issues'. The organizers hat to compare up addresses to firstly find out that it wasn't him racing. Maybe fan boy less, lmao
Hey Roman. Love the content! Might be a silly question but where is Part 1?
I been late to the videos lately, lots of work, theres something Im missing here, if this one is: "The PC inside a Car Wheel - Building the Daniel Abt Gaming PC - Part 2", so then Where is part 1?
Sorry if its a stupid question, I just can't find it.
Thank you for all your amazing content!
I can only find part 1 in German, so i guess he forgot?!??🤷🏻♂️
@@AllanBorch Perhaps part 1 is in German, part 2 in English?
@@AllanBorch Well the link for part one is right there....
@@rodrirm No, part one is available in english also..
@@sajivsingh5601 Thank you, I will re-check then, when I get home from work
The usb c port in the abt logo is genius!
I know this is just a rounded aluminum case by the end of the day, but still feels wrong to drill holes on a rim.
Do it on a Jesko’s rim next! 🤣
I’ve seen a few rim builds but this is by far the best looking. Nice work!
This is absolutely amazing. I came across your video trying to figure out how I was going to make one. Would you be willing to sell this as a kit without the wheel?
thanks for putting the part names in the description
Very cool build.
Hi 'bauer have you got a link for that USB connector assembly?
@der8auer if you read this thank you and I'll try to be constructive
the front face looks goods but the back is not especially on a table where everybody can see around, if the rim is to be mounted on a wall then why not but the psu in the wall will be an issue.
I think i would have put the radiator behind the rim to cover all this mess.
And I would have watercooled the gpu too with such amazing amount of radiator and distro plate it is a waste to not use them.
Then you would not need much air flow inside the rim well only a little bit for vrm and chipset and nvme and ram so i would have put 1 at the bottom with dust filter and only 1 on top but inside the rim
For the io shield you should have come up with another solution than adding cable it looks just meh
On the awesome part the usb c connector in the middle is genius.
8:05 RGB done right !!!!! Sweet
Looks like an explosive device in the trunk.
So the correct title for this video is "The PC inside a Car Wheel inside a car"
Yo, Roman, very cool build, well done adapting everything into the rim, especially the USB-C, really clever to hide it in his logo. Also really like the fan adapters, a clean solution to the problem of mounting a flat surfaced to a curved surface.
Curious though, where's the first part of the build? Don't recall seeing it in the last few months and even went back and searched through your videos and still don't see anything related to this.
What kind of material did you use to make the back were the psu and such is installed on?
Does that resin printer move the vat up and down? 2:50
Awesome,no complaints. Imagine no complaints on video and I am doing this reply from the internet WOW.
hi, may I know what type of aluminum rim you used? Size and etc.
where do you get the circle mount for the mother board and stuff
dAAMN dANIEL !
At 10:30 I think what you are seeing is Thin-film interference from the air gap between the two acrylic plates, not stress lines.
That i
s a "homer simpson hiding his fat" PC
Only thing to point out is that the printer is not SLS but sla/msla, SLS is with powder and lasers
yea,, was looking for Part 1 of the PC build..??
What is the size of that rim?
This wheel could use as heatsink, but awesome anywhay!
btw if the top of the rim is exhaust and the gpu is air cooled , where is the intake for that beefy 3080 ti xD
Nice looking, but it missed a cover from the cable management in my opinion
didn't even bother to translate the thumbnail huh :p
Uhm.. Where is part 1?
ruclips.net/video/H0BdQZUE1d0/видео.html
@der8auer wo ist deine super Katzen 🐱 🐈
Please make kryonaut extreme in 10grams seringe 😢 🙏
he drives a GTR
Got the en video first
I have a scratched Tesla Aero wheel if somebody wants...
Just a though about your sponsors, are you going to have the same sponsor for both the (old) German channel and (this) English channel, even (if/)when you get a sponsor that wants to target only your German audience, or the other way around? Perhaps in the future, once the channel grows back up, you could get more US focused sponsors on this channel. Either way, I wish you luck with this 2 channel approach! I hope the old channel doesn't suffer much if some of your English audience unsubscribes.
if i provide the wheel and all the parts for the pc and give you money to get the mounts and everything else you would need would you be able to make me one and ofc i will pay you too for building it
Its sad you require 2 channels, RUclips should just have the option to set language on channel while you are allowed to flag videos by language, i hope in future you can merge the channels again when its no longer needed.
EN GANG
You know this channel is for EN, right?
@@duccc yes
@@duccc yes that's why he said en gang you spastic