My KELTEC PMR 30 had a problem feeding rounds. It turned out to be a stuck firing pin. Here is the link to the second half. • KELTEC PMR 30 FEEDING ...
Just got a new Kel-Tec. Shot it today for the very 1st time. Had several jams, including the very 1st round in the gun. I only loaded 25 rounds in each magazine. I think the loading is tricky. Today I got a LULA PMR-30 loader. Wow, now it's easy and fast to load the magazines. And all the rounds look perfect in the mag. So will try tomorrow to see if this just might help the jamming!!
MCARB has new feed ramp in metal SS, polish up nice and it works just fine. Also have better/new magazine release/holder that holds the mag up in the gun like it was intended, works flawless now. great gun now.
Are they brand new mags? If yes then follow the magazine break-in formula. Also, if you haven’t read the instruction booklet, please do so as it has critical information on ammo grain weight usage.
I have to hold the gun very lightly for it to function with cci 40grain. I just bought a box of cci vmax and they failure to feed is real, the slide its literally denting the next round so bad it cannot be used in any repeater
I'm guessing there is a Torque spec on those screws ? Perhaps if it is out of spec, it may cause the top to cantor, or lean to one side, causing the Firing pin to bind ?
Kirk , I get it and you're not wrong . But my friend has spent 400 bucks on after market parts he could barely afford just to get it to function . Spent enough on that pos piece of plastic that he could have bought a real gun .
Brother you’re firing pin iwas stuck and stoping the round from ChamberingI will apologize I watch the rest of the video and you’re correct yourself but does that really make much sense to you
@@mrglock2313 in the world of firearms a clip is a device used to hold cartridges for a quick and reliable way to feed multiple rounds into a gun, just like modern magazines. If you meant where is the belt clip then the answer is, there is not one on a stock model of pmr 30. Paper clip? This ain't Wallstreet. Or did you mean movie clip? If that's the case calling this RUclips video a movie clip is just like calling a 30 round mag a clip....
Hey sorry about the delay. I found it on amazon. www.amazon.com/stores/node/6457574011?_encoding=UTF8&field-lbr_brands_browse-bin=Ade%20Advanced%20Optics&ref_=bl_dp_s_web_6457574011
Clean the original grade out of the gun, lube it and use the recommended ammo, it will fire without fail as fast as you can pull the trigger. Also be sure to clean the magazines, and don't oil them whatever you do. You will love the gun.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
@@notimeforjokes.3570 My oldest boy(27) STILL calls a mag. a damn clip once in a while, an has had a firearm in his hand for 20+year's Now ! I just gave up correcting him,LOL😝! The "Revolver&Pistol" thing still catches my attention alot but, I give that one Up Too!
A Kel Tec malfunctioning , imagine that . Destroy that POS and move on . They are not worth the effort , they send them out the door sub standard and idiots still buy them .
Just got a new Kel-Tec. Shot it today for the very 1st time. Had several jams, including the very 1st round in the gun. I only loaded 25 rounds in each magazine. I think the loading is tricky. Today I got a LULA PMR-30 loader. Wow, now it's easy and fast to load the magazines. And all the rounds look perfect in the mag. So will try tomorrow to see if this just might help the jamming!!
Make sure you take it apart and grease the slide. Some are dry. 👍
Thanks for sharing this issue. Good to know.
MCARB has new feed ramp in metal SS, polish up nice and it works just fine. Also have better/new magazine release/holder that holds the mag up in the gun like it was intended, works flawless now. great gun now.
A firing pin has nothing to do with feeding the next round my opinion
Are they brand new mags? If yes then follow the magazine break-in formula.
Also, if you haven’t read the instruction booklet, please do so as it has critical information on ammo grain weight usage.
I have to hold the gun very lightly for it to function with cci 40grain. I just bought a box of cci vmax and they failure to feed is real, the slide its literally denting the next round so bad it cannot be used in any repeater
I'm guessing there is a Torque spec on those screws ?
Perhaps if it is out of spec, it may cause the top to cantor, or lean to one side, causing the Firing pin to bind ?
Possible, but it came from the factory that way.
Kirk , I get it and you're not wrong . But my friend has spent 400 bucks on after market parts he could barely afford just to get it to function . Spent enough on that pos piece of plastic that he could have bought a real gun .
Brother you’re firing pin iwas stuck and stoping the round from ChamberingI will apologize I watch the rest of the video and you’re correct yourself but does that really make much sense to you
I’m having this issue with my cmr30 and the pmr30 is also getting there
You took it all apart to realize you’re firing pin will stuck?? I sure hope that means you just took a slide off of it right?
By the time you spend over 250.00 on the M carbo upgrade kit you could buy the new S&W 22 magnum pistol and have a solid gun.
Where does the clip go in this gun?
Just like most modern handguns, straight into the grip
@@ianhale4466 you sure that isn't where the magazine goes???
@@mrglock2313 in the world of firearms a clip is a device used to hold cartridges for a quick and reliable way to feed multiple rounds into a gun, just like modern magazines. If you meant where is the belt clip then the answer is, there is not one on a stock model of pmr 30. Paper clip? This ain't Wallstreet. Or did you mean movie clip? If that's the case calling this RUclips video a movie clip is just like calling a 30 round mag a clip....
It screws on to the end of the barrel 😱😂🤫
You need a good loader for your bullets. Loading by hand is a waste of time. Good video
I bought this one and it works really good. americanspeedloaders.com/product/pmr-30-cmr-30/
Whats your laser
Hey sorry about the delay. I found it on amazon. www.amazon.com/stores/node/6457574011?_encoding=UTF8&field-lbr_brands_browse-bin=Ade%20Advanced%20Optics&ref_=bl_dp_s_web_6457574011
What laser is that
www.amazon.com/gp/product/B0716YRB7J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
My first gun ever
Gotta use 40 grain ammo, and don't let the slide slam shut, it's in the manual. Also kel tec has a lifetime warranty, send it in get it fixed.
They told me to go to MCARBO
Clean the original grade out of the gun, lube it and use the recommended ammo, it will fire without fail as fast as you can pull the trigger. Also be sure to clean the magazines, and don't oil them whatever you do. You will love the gun.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
I told Keltec about this problem . Jammed the very first time,first shot. They said I could send it to them for repair,but it wasn't going to be free. I will keep watching RUclips suggestions to remedy.
Go RUclips answering my questions
Where can I buy a extra CLIP ? 😂🤭🤪‼️
Dude, who cares? We know he means a magazine, he called it a clip. So what?
@@notimeforjokes.3570 My oldest boy(27) STILL calls a mag. a damn clip once in a while, an has had a firearm in his hand for 20+year's Now !
I just gave up correcting him,LOL😝!
The "Revolver&Pistol" thing still catches my attention alot but, I give that one Up Too!
Stone the feed ramp
Magazine not clip
magazine, not clip.
Ya thanks. I grew up where things were called banana clips, so I have alot to work on..... LOL.
A Kel Tec malfunctioning , imagine that . Destroy that POS and move on . They are not worth the effort , they send them out the door sub standard and idiots still buy them .
Ah, yes, because everyone can afford really expensive guns.
You lost me at clip
pretty crappy handguns overall