I have had my printer for over a year now, you just helped me with one of the most simplest steps that was the hardest for me to figure out on my own. This video is well done 👍🏾
Hey there, watched most of your tutorials and I've learned a lot. Question: Why is my Uninet Icolor 560 final transfer sheet print jobs showing white spotting's?
Make sure in the queue is set to either usb or wireless, whichever your using, better to use usb, and make sure your design fits within the allotted paper size you have selected. I’ve had that happen before either when queue was wrong or the file was bigger than the page and would not print, check the white toner support group on facebook
Hello, so I have went through an entire package of standard, 2 1/2 packs of one step, and another 40 ultra bright, probably close 400 prints…. My machine has given me low toner warning since June, I bought my refills then, still haven’t had to use them, thought because I had warning low toner would be gone quick, but so far so good, but it is all dependent upon the amount of ink coverage u are using as well. Hope this helps
I would say it was the pressure, I increased after and presses have been pretty good. I do make sure to allow them to be completely cool before peeling though.
The prorip software only works with the usb dongle, if they did not include that you should request it from them, otherwise you will probably have to purchase one, if you contact Craig spooner or joe dovi, they may be able to get you a discount upon proof of purchase?
When peeling jobs that are logos, you cannot afford any of the toner/image to remain on the transfer. I haven't had one successful job yet for logos. I don't know which combination of temperature or pressure results in a more successful transfer. Maybe it's the peeling technique? What is your success rate now?
My success rate with 2 step standard is really good. On occasion I might lose a tiny corner or little piece but usually does not affect my design. The pressure and peeling technique def make a difference. I have had a little issues with the icolor select ultra bright which I have just recently started to try using. What paper specifically are u having issues? Have u checked out the White toner transfer group on Facebook? Wonderful group that offers help.
It is a heat press nation sure pressure 15x15 here is link www.heatpressnation.com/products/hpn-signature-pro-15-x-15-swing-away-heat-press-with-pressure-marker
Hey there, not sure what error your getting, so not exactly sure where to help u, I am still fairly new to this, here is a link to the white toner group who has a lot more experience and where I turn to for help. ruclips.net/video/lpieCwwL8nM/видео.html. I don’t mind trying to help, but need more info.
you did a great job of explaining how to use the white toner printer! I feel so much better now! Thank you so much!
Awesome, thank you for watching, I appreciate it. I plan on posting some more WT videos soon, so stay tuned!!
I'm new to the white toner printer also. I found your video very thorough, and informative. Thank you for sharing.
Not a problem, thanks for watching and feel free to share the video!!
And welcome to the wonderful world of white toner printing!!
I have had my printer for over a year now, you just helped me with one of the most simplest steps that was the hardest for me to figure out on my own. This video is well done 👍🏾
Awesome, thank u very much for watching!! 🙏
I needed this!! Thank you..
@@insomniadesigns2471 glad it helped, thank u for watching !!❣️
Thank you so much for the walkthrough! This video really helped set up my toner
Awesome, glad I could help, thank you for watching!
Thank you sir,I made my first print.hoooray!
Awesome!! Hope it came out well, this printer is great and allows a lot of diversity in different mediums u can out prints on
Brother, I am so glad you are doing this.....I needed the help
Awesome, glad it could help, hopefully I’ll be getting some more up soon!! Wtp is def a bit of learning curve
Hey there, watched most of your tutorials and I've learned a lot. Question: Why is my Uninet Icolor 560 final transfer sheet print jobs showing white spotting's?
Great thorough video!!!
Thank you!!
I can’t get mine to print out. Thanks for your video and time. I’m having trouble getting my image to print. Nothing happens
Hey Ron, sorry to hear that, and sorry I’m so late responding, have u figured out or got yours to print? Lmk!
I’m trying to print but it keeps saying Queue Running total:1 holding 1
Make sure in the queue is set to either usb or wireless, whichever your using, better to use usb, and make sure your design fits within the allotted paper size you have selected. I’ve had that happen before either when queue was wrong or the file was bigger than the page and would not print, check the white toner support group on facebook
Hi a question how many prints you have so far I only have printed 90 less than half page each and the Y and C are gone. Thank you
Hello, so I have went through an entire package of standard, 2 1/2 packs of one step, and another 40 ultra bright, probably close 400 prints…. My machine has given me low toner warning since June, I bought my refills then, still haven’t had to use them, thought because I had warning low toner would be gone quick, but so far so good, but it is all dependent upon the amount of ink coverage u are using as well. Hope this helps
Did you find out what happened during the first peel? Was it pressure or time to cool?
I would say it was the pressure, I increased after and presses have been pretty good. I do make sure to allow them to be completely cool before peeling though.
Bought a used Icolor 560. It will not let me install RIP software. Does the former owner need to uninstall the software on their computer 1st?
The prorip software only works with the usb dongle, if they did not include that you should request it from them, otherwise you will probably have to purchase one, if you contact Craig spooner or joe dovi, they may be able to get you a discount upon proof of purchase?
When peeling jobs that are logos, you cannot afford any of the toner/image to remain on the transfer. I haven't had one successful job yet for logos. I don't know which combination of temperature or pressure results in a more successful transfer. Maybe it's the peeling technique? What is your success rate now?
My success rate with 2 step standard is really good. On occasion I might lose a tiny corner or little piece but usually does not affect my design. The pressure and peeling technique def make a difference. I have had a little issues with the icolor select ultra bright which I have just recently started to try using. What paper specifically are u having issues? Have u checked out the White toner transfer group on Facebook? Wonderful group that offers help.
What heat press is this
It is a heat press nation sure pressure 15x15 here is link
www.heatpressnation.com/products/hpn-signature-pro-15-x-15-swing-away-heat-press-with-pressure-marker
I already Put in UNInetICOLOR on PORT but its still now Working Help PLsss i Follow all the Step but Still not
Hey there, not sure what error your getting, so not exactly sure where to help u, I am still fairly new to this, here is a link to the white toner group who has a lot more experience and where I turn to for help. ruclips.net/video/lpieCwwL8nM/видео.html. I don’t mind trying to help, but need more info.