I'm in a bind with due order for the morning. Does anyone knows the step by step setting to print on full color on white card stock on the icolor 650? Could not get complete help with Uninet. I think they left at 5:30pm during my teck support. Thanks.
Thank you for the video it’s helpful. How do you know which side of step A to print on? I just ordered the 560. The printer has not arrived yet, only the paper.
This is so hard for me 😩 I keep getting white lint from the B sheet into the A sheet after the marrying process with some pieces of the letters coming off during the separation process. This Tusy heat press is hard 😩🥴
what media setting do you have your printer on? I am using the icolor 650 and using the transfer film, it comes out flaky and the flakes are smeared down the page. I have been using Prorip and have it set on transparency and have tried ultra light to heavy weight
Did you ever use the smart cut software for the full back prints to try and break up the pieces and press them seperatly to reduce the marrying errors? A reprint could cost you one extra sheet but on 12 shirts broken into 6 parts, you only have a one sheet full of parts and then 100% yield? How much labor is it worth then?
What does the print feel like? How well does it wash, peeling, cracking? I received a test print from another white toner printer brand and it has a paper feel on the shirt, the colors weren’t vibrant & the image looked dull after the first wash test. I’m waiting on a sample from the 560 & super excited to test it out. Thank you for the info 😊
I found out that the instructions don't always matter. Sometimes it can change depending on the garment. Print feel is different depending on the paper
Hello, Sir! I am looking for a printer and wh seen the two models i550 and i560. When I do a search to buy a good package I realize that the i550 printer is no longer so easy to get, it really will not continue its production to make way for the i560? or is the i550 just so much better and so there is less inventory? which one do you recommend?
Thanks for the video, really enjoyed it. Question, you mentioned you would have purchased the 560 printer instead of the 600 printer. Why is that? That’s my dilemma right now, which one I want to buy. Any input?
Hi, How long have/did your ink cartridges last? I've had my printer for about a week and the printer is already saying it's low on magenta and yellow. I thought the cartridges were supposed to last at least 7,000 pages.
They should definitely last longer than that. If you open the printer, do you have toner spilled everywhere? I didn't get 7000 pages, I think I got about 400 before I had to replace. The 7000 is based on 10% coverage per print, so it's not a real estimate.
Thanks for putting this together! Perfect timing as I cludge through the initial learning process myself! 👍
Happy to help
Yes, very helpful video. I have the 560 but, wish I have one that does bigger prints! Thanks!
Very helpful tips!
Thank you, thank you thank you
So freaking cool!
I wish I had a printer
I've mostly financed my machines. They offer plans on the website now too - timetomakesomething.com/icolor
I'm in a bind with due order for the morning. Does anyone knows the step by step setting to print on full color on white card stock on the icolor 650? Could not get complete help with Uninet. I think they left at 5:30pm during my teck support. Thanks.
You just need to swap the placement of the white toner and switch the print queue so it prints white as an underprint.
@@ttms Thanks for the response. I will try that so to be ready for next order. I had to go to plan B (Roland P&C) to make the due date on this one.
Hey! We have one of these in my class at school, and we need help! My first question is… is the 2 step only for dark shirts?
Thank you for the video it’s helpful. How do you know which side of step A to print on? I just ordered the 560. The printer has not arrived yet, only the paper.
You print on the dull side.
This is so hard for me 😩 I keep getting white lint from the B sheet into the A sheet after the marrying process with some pieces of the letters coming off during the separation process. This Tusy heat press is hard 😩🥴
Is white toner still worth it in 2023 ? And how long does the ink on shirt last ?
Thanks for the video. I have the 650 and I'm having issues with the white toner peaking around the outside of my prints. How can I adjust this?
There is a setting to reduce the choke on the white. That should fix your problem.
I'm also planning to get one for myself but can you actually use different AB sheets with icolor? Their original ones are a bit pricy. :)
Hi excellent video, do you have one using the eco-solvent ink on your garments?
I don't have eco-solvent, but I have this one using my HP ruclips.net/video/RTP3oJ5ugHU/видео.html
what media setting do you have your printer on? I am using the icolor 650 and using the transfer film, it comes out flaky and the flakes are smeared down the page. I have been using Prorip and have it set on transparency and have tried ultra light to heavy weight
I left it on the default. Not sure what it was. I gave my printer away to a subscriber so I can't check.
what sizes can youn u print ? I'm looking to do like 11x18 @ least 10x15..
The 600/650 will do 11x17 but the usable area is closer to 10.5x16.5
Did you ever use the smart cut software for the full back prints to try and break up the pieces and press them seperatly to reduce the marrying errors? A reprint could cost you one extra sheet but on 12 shirts broken into 6 parts, you only have a one sheet full of parts and then 100% yield? How much labor is it worth then?
The software wasn't free when I got my printer so I've never used smartcut.
What does the print feel like? How well does it wash, peeling, cracking? I received a test print from another white toner printer brand and it has a paper feel on the shirt, the colors weren’t vibrant & the image looked dull after the first wash test. I’m waiting on a sample from the 560 & super excited to test it out. Thank you for the info 😊
I found out that the instructions don't always matter. Sometimes it can change depending on the garment. Print feel is different depending on the paper
Just got my 560 uninet icolor,
@@g34r9 hows it going
Hello, Sir!
I am looking for a printer and wh seen the two models i550 and i560. When I do a search to buy a good package I realize that the i550 printer is no longer so easy to get, it really will not continue its production to make way for the i560? or is the i550 just so much better and so there is less inventory? which one do you recommend?
The 560 is the replacement for the 550. Both are good but get the 560 if you can.
Thanks for the video, really enjoyed it. Question, you mentioned you would have purchased the 560 printer instead of the 600 printer. Why is that? That’s my dilemma right now, which one I want to buy. Any input?
600 i believe print bigger images
I mainly did left chest, hats, and sleeves. I didn't need to spend the money on the large print area. That's really the biggest difference.
What paper was that that and how many washes are you getting
Uninet standard. I haven't done a wash test, but I've never had a customer complain. I never did solid prints, just left chest, sleeves, and caps.
Hi, How long have/did your ink cartridges last? I've had my printer for about a week and the printer is already saying it's low on magenta and yellow. I thought the cartridges were supposed to last at least 7,000 pages.
They should definitely last longer than that. If you open the printer, do you have toner spilled everywhere? I didn't get 7000 pages, I think I got about 400 before I had to replace. The 7000 is based on 10% coverage per print, so it's not a real estimate.
@ttms when u say 10% how much is that..is it because u make smaller prints?
Also who did u order your printer from..I'm trying to look for the best deal
Can u make me some leather patches ?
Yes, send me an email ttmakesomething@gmail.com
First. And hello
Good to see you as always.