3 Keys To White Toner Direct-To-Film Printing Success

Поделиться
HTML-код
  • Опубликовано: 5 окт 2024

Комментарии • 57

  • @halowealthy2314
    @halowealthy2314 2 дня назад

    Thank you so much for giving back to your communities 😊❤

    • @HeatPressNation
      @HeatPressNation  2 дня назад

      Thank you for your kind words! Here to help and educate :)

  • @g.kolarik8500
    @g.kolarik8500 8 месяцев назад

    Thank you from Austria. Great job!

  • @josephsterling8510
    @josephsterling8510 3 года назад +1

    Thank you for this video. It’s all making sense now. I appreciate your videos. I get a lot out of them. Thanks

  • @MyInfojunkie
    @MyInfojunkie Год назад

    Excellent tip with putting the paper in it for easy peel. I’d be wondering if that was possible but petrified to try as I’d be worried about ruining the heat press.

  • @ReneeByers-lt2kq
    @ReneeByers-lt2kq Год назад

    The rub helps it stick better and evenly. If I start to see a separation I put that edge back down and rub that pulling puce again and pull from the other direction. 90% of the time it corrects the separation.

  • @mustafaerdogan2202
    @mustafaerdogan2202 Год назад +1

    Whats the difference between the crio8432 and the oki8432 looks both identical?

  • @HMcdon
    @HMcdon Год назад

    great illustration

  • @bottlethisglassthat2576
    @bottlethisglassthat2576 Год назад

    Hello, Jared! I read some of the comments and see that @ZivergeGaming has the same concern that I do about the LuminRIP software as far as experiencing difficulty printing white within the images. I also contacted Customer Support and they stated that it depends on how the image was setup and that we should use for best results the PNG and TiF/TiFF files in which I do but cannot get white to print. Now I'm ready to get rid of my Ricomah Printer. There isn't really much training or videos on that subject, I agree with @ZivergeGaming.

  • @renatopleterski5034
    @renatopleterski5034 2 месяца назад

    Thanks for Video, i am a Newbie, it helps a lot, by the way this colorfull Lion Picture, where can i get it ?

  • @mandkgarments
    @mandkgarments 11 месяцев назад

    Which of these printers is recommended? I want a printer that'll print colors and white.
    1. OKI White Toner Printer Pro 7411WT
    2. OKI White Toner Printer Pro 8432WT

  • @gmlucky9145
    @gmlucky9145 Год назад

    Do you have a detailed instructions on how to rasterize properly, thanks.

  • @MyInfojunkie
    @MyInfojunkie Год назад

    Can you put them in the fridge to cool them down if necessary?

  • @davidlarson4422
    @davidlarson4422 3 года назад +2

    It’s not technically rasterization.. the graphic is already in a raster form, vs a vector form. It’s more determining the right halftone for the image that creates the printable image

  • @russiandontknow
    @russiandontknow 11 месяцев назад

    Hi! awesome video! I have a few questions please answer this ! All this process is done with light pressure ? Do you always rasterize even if its a small logo ? Im getting my holes clogged with glue any idea this is happening ? PLEASE answer and i will subscribe!

    • @HeatPressNation
      @HeatPressNation  11 месяцев назад +1

      Hi there! White toner printing will always require firm pressure throughout the process. If it is a small logo (3.5" or so) it should be fine without rasterizing it. If there's a possibility of knocking out some colors, we would recommend that for a softer feel. As far as the clogging, we would need more information. If you purchased your unit through our company, please send a photo to our technical support team and they can assist further :) You may send it to: support@heatpressnation.com.

  • @leifgarrettroquero9240
    @leifgarrettroquero9240 9 месяцев назад

    when will this be available in the philippines

  • @RoundBallDefender
    @RoundBallDefender 2 года назад

    I just purchased the 16x20 swing away, with surepressure, (so yes a lot of $) and the sure pressure dial doesn’t work. The last digit just spins and never changes any of the other digits. So my pressure is at 9988.X no matter how many times I spin it. Anything before the decimal point, never changes.

    • @HeatPressNation
      @HeatPressNation  2 года назад

      Hi Jason! Please reach out to our technical support team and they will be able to assist :) You may reach them at 800-215-0894 option 3.

  • @clevelandsfinestentertainment
    @clevelandsfinestentertainment 2 года назад +1

    I was thinking of getting a I color white toner printer but the cost of the white toner cartridge just white is 500$ the paper is also 175$ do you think the cost of ink and paper will go down in the future or would a DTF printer be a better option

    • @HeatPressNation
      @HeatPressNation  2 года назад

      We don't really foresee the costs of toner going down any time soon. A DTF printing setup is going to have a much higher startup cost than a white toner laser printer. If you're trying to choose the more affordable route, white toner is still the way to go.

  • @sally969
    @sally969 Год назад

    Which printer do you recommend?

  • @ZivergeGaming
    @ZivergeGaming 2 года назад +1

    love your videos, thank you, question. i have the Luminaris 200, and everything seems to peel fine except the color white and not sure why and can not seem to find information as to what would cause this.

    • @HeatPressNation
      @HeatPressNation  2 года назад +1

      This video shows our best tips for getting a proper A+B marriage. Of course, you'll also want to make sure you're following the specific instructions for your paper and be sure you're using a quality heat press as well.

    • @ZivergeGaming
      @ZivergeGaming 2 года назад +1

      @@HeatPressNation i have and along with all videos they gave, the ricoma printer and press bundle they gave free training so registered for that, everything is perfect except the white color in my images peels off. thank you for the reply

  • @margaretmclean6424
    @margaretmclean6424 Год назад

    Hi Jared. I only see Digital Heat FX options for the print mode. Is there a way that I can import the Forever print mode options. Do you perhaps have the Cadlink pro version of print optimizer?

  • @davidlarson4422
    @davidlarson4422 3 года назад +1

    With the particular graphic …the eagle…. Since it’s such small individual areas, what would happen with just the black knockout? That would break up the image and open up areas to soften print.

    • @HeatPressNation
      @HeatPressNation  3 года назад

      Yes, we actually tried that. It looked great. But it wasn't as soft as doing both the black knockout and adding holes.

    • @aleidapena1693
      @aleidapena1693 Год назад

      Would those settings still be used with like a grey shirt? Or not just the blackout feature?

  • @jackiegarcia7148
    @jackiegarcia7148 7 месяцев назад

    How come when I peel the white paper It gets very hard and sticky to peel off and some residue gets stuck on it?

    • @HeatPressNation
      @HeatPressNation  7 месяцев назад

      Hi there! By white paper do you mean the B-sheet with the adhesive on it? If so, it must be peeled immediately while hot to ensure it does not cool and set.

  • @flexlabz
    @flexlabz 2 года назад

    I keep getting a little portion of the print not adhering to the b side. It’s a full Color print. Could it be my regular toner from the canon brand? It seems the whites do fine.

    • @HeatPressNation
      @HeatPressNation  2 года назад

      The most common reason for a portion of the print not adhering to the B-sheet is that it cooled faster than the rest of the sheet. This can be caused by a portion of the print lifting, the press not evenly distributing heat, or waiting too long to peel the A & B sheets apart. We have a whole video with our best tips for getting consistent A+B marriages: ruclips.net/video/vfCnwIT6zTs/видео.html

  • @1High420
    @1High420 2 года назад

    Does the white toner printer ink come separate when buying the ink for it

    • @HeatPressNation
      @HeatPressNation  2 года назад +1

      Hi there! Typically, white toner printers come with a starter toner set.

  • @glennmaloney4962
    @glennmaloney4962 Год назад

    can you print on white t shirts with wghite toner printers

    • @HeatPressNation
      @HeatPressNation  Год назад +1

      Yes, definitely! You can use white toner for light garments with transfer media like FOREVER Laser Light (heat.press/foreverLL) or TheMagicTouch TTC 3.1 (heat.press/ttc31).

  • @shereedavis2058
    @shereedavis2058 Год назад

    Will this program work with Luminaris 200? I hate the LuminRip program

    • @HeatPressNation
      @HeatPressNation  Год назад

      Hi there! We would recommend reaching out to your supplier about this.

  • @tiffanyshowers7929
    @tiffanyshowers7929 2 года назад

    I am having trouble with getting mu printer to print and it was. I have the luminaris 200 amd I can't figure out what I did wrong

    • @HeatPressNation
      @HeatPressNation  2 года назад

      We would recommend reaching out to Ricoma directly for assistance troubleshooting your Luminaris printer.

  • @aspecialcanaryl5385
    @aspecialcanaryl5385 2 года назад

    What software can i use with canon lbp 623 with white ghost toner

    • @HeatPressNation
      @HeatPressNation  2 года назад

      We don't carry Canon or Ghost Toner products, so unfortunately we're not able to make a recommendation. If anyone reading this has experience with these products, please share your recommendation!

  • @omarsharif2216
    @omarsharif2216 3 года назад

    Hi could you tell me how many times i can wash a dtf printed tshirt?

  • @crowznest
    @crowznest 3 года назад

    What RIP software are you using? I didn't get RIP software with my printer

    • @HeatPressNation
      @HeatPressNation  3 года назад

      We're using the Digital Factory v.10 for white toner printers - heat.press/wdtrip

    • @crowznest
      @crowznest 3 года назад

      @@HeatPressNation Will this work on a HP Ghost Printer?

  • @philipfong8079
    @philipfong8079 2 года назад

    I am new and watched a few video but yet no one explain that the printer print full color including white or white toner printer only print white.

    • @HeatPressNation
      @HeatPressNation  2 года назад

      These white toner printers print full color, including white. Many of them are CMY+W, so they'll print the full color graphic using CMY and then print an underbase using W. This white underbase allows the printed graphics to be seen when placed on black/dark garments.

  • @DirkthePanda
    @DirkthePanda 2 года назад

    Great video! Your customer service people are also amazing, and I’m leaning towards buying the 711WT printer. Regarding the Forever Dark paper, are there any negatives of using it for all shirt colors, including light/white shirts? I saw online that there’s a Forever Light option, but I’d prefer not getting two types of paper if Forever Dark can cover my bases.

    • @HeatPressNation
      @HeatPressNation  2 года назад +1

      No, there's no downside to using the Forever Dark on white/light-colored tees. It's slightly thicker than the Forever Light, BUT it's a lot more durable. Lots of shops use it for both light and dark garments.

    • @DirkthePanda
      @DirkthePanda 2 года назад

      @@HeatPressNation Thanks! I decided to go with UniNet after doing some research, and I would assume their transfer paper is the same in that regard?

    • @rosecowan1556
      @rosecowan1556 Год назад

      Do you have link to Rip software?
      Also if the package of transfer has been open but closed for a year and try to use it, is it still good. I bought forever dark and the transfer on garment and some on clear paper

  • @trscsaeg
    @trscsaeg Год назад

    Eagles are badass. Not cute

  • @trscsaeg
    @trscsaeg Год назад

    Eagles are badass. Not cute