Hey Kelvin. Once again, such a great video! Your use of graphics helped me so much on understanding the parmetric controls on the MG 24. Thanks so much for all the time spent. Pete
Thanks Kelvin for this video. I've watched many videos and your video explains eq most clearly. I like how you explain a band, then show us what cutting and boosting frequencies are and how to do it. I subscribed because I'd like to learn more from you about audio. Blessings to you!
I sincerely have intentions of writing an article on this relating it to my area of specialisation, and this has given me a ton of information and Bedrock. Thank you brother.
Hello, Mr. Kelvin, please can you try to connect the mixing console with amplifier and crossover, and speakers. Because i wish to understand how the Amplifiers and crossovers are being connect to speakers. And also on how to use auxilliarys channels to assign them on different channels from the mixing console to the amplifier to the speakers. Please!!!!
Hi Kelvin, my god I have seen so many video clips of people explaining this topic, but you my friend have explained it so so well, I just purchased the new Mackie 16fx V3 mixing desk, and i usually keep all control knobs at 12-o-clock position, yes I know this is not correct and I have found last nights gig basically bringing my High up fully to get the crisp vocal in after here, the mic I use is the Beyerdynamic M88tg love thi for its tone and throw, but all the way full with the high is really not good, If I angle my 935a rcf top in slightly towards I get the weird feedback shrill interference, puzzled as to what this is, for the fx I use number 12 on this desk reverb with slight Delay and my main output is set to unity 00, So first off should the button for my vocals cutting be actually on, I'm a baritone vocalist, should I never be touching 12 position on my low, it was explained so well I could see what wave I was getting from you showing the diagram of eq band while at the same time the control knobs on the desk, and the image I'm now seeing in relation to my Mackie pro16fx is scary, can you do a little research on this desk and is it as good as it's reviewers give it and how I should be setting my eq, Thanks Kelvin, I'm now subscribed to your channel its a credit to you, Martin
Master kelvin great video. Pls we use this same mixer in church and we don’t have a sound guy right now. Pls what is the right tuning for my bass guitar channel. I’d really appreciate it if u can help me out sir
You really can’t do that with an analog mixer. The EQ adjustment I made on the mixer and the corresponding graphical illustrations shown in the video, were done differently. I synced them in edit. 😎
@@KelvinEriaganoma Thanks for the Feedback Sir. My next question is; We use the same console as yours in our church, we find difficulty in recording our live sessions. Do we need an Audio interface or there's a way out. 2. Whenever we connect a reference headphone we only hear one part that's the Left only
Hello your video is good but my English is bad. Can i ask, the hi pass filter should be all press down. On vocals. But up on bass and guitars and drums???? Or vice versa? Thank you for your reply and God bless you
Hey Kelvin, would like to find out, on which instruments would you use the pad button? And in what circumstances would you use it? Also does these eq settings also apply to connecting cordless/wireless mics
Hi brother.... Which software you used for spectrum analyser... when you change in mixer there is change in software... Wt software is that... How did you do that....
I used the built-in Parametric EQ from Cakewalk by Bandlab. However, The mixer EQ adjustment and the software adjustment were done differently. I synced them in edit. Thanks for reaching out.
Ciao Kelvin, volevo sapere come posso verificare con grafico come da tua descrizione ed eventualmente quale programma utilizzi e quali sono i collegamenti sul mixer per vedere il grafico? Grazie Renato **************** Hi Kelvin, I wanted to know how I can check with graph as per your description and possibly which program you use and what are the connections on the mixer to see the graph? Thanks Renato
You really can’t do that with an analog mixer. The EQ adjustment I made on the mixer and the corresponding graphical illustrations shown in the video, were done differently. I synced them in edit. 😎
Thanks brother I wish I found you long time ago I would have been the best sound man. I have a question. Can I cut more than one frequency using my MG mixer
Funny how he dropped this 2 years ago and it's just helping people out now
This is the best EQ tutorial ever. Very straightforward with clear language. All the other instructors use complexe technical words! Thanks for that
😂 Kelvin you did well...some of us didn't know this about analog mixers...greetings from Ghana
The best tutorial ever on eq. Thanks Kelvin
Hi, I am Zambian and I want to thank you for making me understand the EQ on the analogue.
Great examples, seeing on a eq graph what the 3 band eq does is very helpful.
Hey Kelvin. Once again, such a great video! Your use of graphics helped me so much on understanding the parmetric controls on the MG 24. Thanks so much for all the time spent. Pete
Thanks Kelvin for this video. I've watched many videos and your video explains eq most clearly. I like how you explain a band, then show us what cutting and boosting frequencies are and how to do it. I subscribed because I'd like to learn more from you about audio. Blessings to you!
You’re welcome TerryRay. I’m glad you found value from the video. Stay blessed.
Thank you brother you made me understand more better than my lecture.
Wow,
This is one of the most useful tutorials I have ever watched. I understood very well the usefulness of the EQ nobs on our church MG24 Mixer.
You make some of the best sound videos on RUclips. Thank you! Love from Canada!
One of the best videos I ever watched. Very informative and the editing was key
I sincerely have intentions of writing an article on this relating it to my area of specialisation, and this has given me a ton of information and Bedrock. Thank you brother.
This is fulfilling to read. You're welcome.
How do you achieve the screen on the left to show what you are mixing
Your videos are great for those of us still using analog sound boards. Really helps me we are using the big brother to your board the MG32 14FX.
Newly subscribed. Your channel content and presentation style are excellent. Thanks so much!
and this tutorial in particular (displaying the frequency spectrum during explanation) is absolutely fantastic.
thanks alot mister Kelvin I have been looking for this explaination for a long time
🙏🙏🙏
You're welcome. I'm glad you got value from the video.
Thanks kelvin, that video really sense and it was so clearly explained, I’ll be checking out your other videos
I've watched many videos, your clearly explains it. I hope I can find more videos
Thank you brother, awesome job you doing..
Thanks very much for the video on effects
Kelvin, thanks so much!!!
I have learned alot from this video. Thanks very much bro
You're welcome.
This is the best now my mix has change for good
Nice information
Thanks sir
Very well explained. Thank-you 👍
Great job! I think I get it.
Wow
Nice one sir
Thanks sir Kelvin, your teaches really wonderful, im grateful i meet you but please i have a question ❓
Hello, Mr. Kelvin, please can you try to connect the mixing console with amplifier and crossover, and speakers. Because i wish to understand how the Amplifiers and crossovers are being connect to speakers. And also on how to use auxilliarys channels to assign them on different channels from the mixing console to the amplifier to the speakers. Please!!!!
Man you make me a better sound engineer God bless man
Thank you! That is very helpful
thanks for the tips kap so very helpful to me
I’m glad you got value from the video.
This is very helpful 👌
Excellent! I wish I watched this video 24 hours ago! lol
Great video Bro❤
Good video! ! Thanks for making it!
Hi Kelvin, my god I have seen so many video clips of people explaining this topic, but you my friend have explained it so so well, I just purchased the new Mackie 16fx V3 mixing desk, and i usually keep all control knobs at 12-o-clock position, yes I know this is not correct and I have found last nights gig basically bringing my High up fully to get the crisp vocal in after here, the mic I use is the Beyerdynamic M88tg love thi for its tone and throw, but all the way full with the high is really not good,
If I angle my 935a rcf top in slightly towards I get the weird feedback shrill interference, puzzled as to what this is,
for the fx I use number 12 on this desk reverb with slight Delay and my main output is set to unity 00,
So first off should the button for my vocals cutting be actually on, I'm a baritone vocalist, should I never be touching 12 position on my low, it was explained so well I could see what wave I was getting from you showing the diagram of eq band while at the same time the control knobs on the desk,
and the image I'm now seeing in relation to my Mackie pro16fx is scary, can you do a little research on this desk and is it as good as it's reviewers give it and how I should be setting my eq,
Thanks Kelvin, I'm now subscribed to your channel its a credit to you,
Martin
Master kelvin great video. Pls we use this same mixer in church and we don’t have a sound guy right now. Pls what is the right tuning for my bass guitar channel. I’d really appreciate it if u can help me out sir
Nic job.. 🎉
Thank you very much! 👌👌👌 New subscriber here. 😊
Awesome! So helpful!
Thanks bro ...keep it up
This is great pls sir what if I set my EQ on my mixer finished and have an external EQ what's the best way to do that in other to have a great sound
Good ❤
Please how do I connect my mixer to my computer to show graphical representation of whatever I do just like how you're doing with the eq
You really can’t do that with an analog mixer. The EQ adjustment I made on the mixer and the corresponding graphical illustrations shown in the video, were done differently. I synced them in edit. 😎
@@KelvinEriaganoma Thanks for the Feedback Sir. My next question is; We use the same console as yours in our church, we find difficulty in recording our live sessions. Do we need an Audio interface or there's a way out.
2. Whenever we connect a reference headphone we only hear one part that's the Left only
Hello your video is good but my English is bad.
Can i ask, the hi pass filter should be all press down. On vocals.
But up on bass and guitars and drums????
Or vice versa?
Thank you for your reply and God bless you
Hey Kelvin, would like to find out, on which instruments would you use the pad button? And in what circumstances would you use it? Also does these eq settings also apply to connecting cordless/wireless mics
Can I like this video 10 million times
excelent
Hi brother.... Which software you used for spectrum analyser... when you change in mixer there is change in software...
Wt software is that... How did you do that....
I used the built-in Parametric EQ from Cakewalk by Bandlab. However, The mixer EQ adjustment and the software adjustment were done differently. I synced them in edit.
Thanks for reaching out.
Please how do i know what frequency my analogue mixer eq bands (lows and high are set to)
Hi Kelvin, how are you able to show the visual graph of what you are adjusting on the analog console?
I did them separately and synced them in the edit.😁
I wish to say you are a good teacher, but please also add speakers amplifiers, crossovers, power amplifiers
Ciao Kelvin, volevo sapere come posso verificare con grafico come da tua descrizione ed eventualmente quale programma utilizzi e quali sono i collegamenti sul mixer per vedere il grafico? Grazie Renato
****************
Hi Kelvin, I wanted to know how I can check with graph as per your description and possibly which program you use and what are the connections on the mixer to see the graph? Thanks Renato
You really can’t do that with an analog mixer. The EQ adjustment I made on the mixer and the corresponding graphical illustrations shown in the video, were done differently. I synced them in edit. 😎
Thanks brother
I wish I found you long time ago I would have been the best sound man.
I have a question.
Can I cut more than one frequency using my MG mixer
Yes you can.
@@KelvinEriaganoma Oh then how can I do that on my MG 32
What is the name of the program you use
Can you please show me how to turn drams on my eq
You said I should put pfl on
Cool frère
Please, do I need to connect a Yamaha MG24/14FX mixer to another Equalizer before connecting to an amplifier?
It depends on you
The Eqalizer helps it sounds better
What can i use eq for
Pls how do I on my tap botton
Hey my brother I would like to understand the mixing board a little more I'm am now learning the board
Sharp
Muhe muvuga mukinyarwanda
Hi master, please you are not replying our messages
Mehhh thanks so much