ATC Communications and Radio Procedures
HTML-код
- Опубликовано: 8 сен 2024
- Access all our discussions (65+ hours of content, organized by topic, with more than 20 instructors and no ads), at www.privatepil.... Use code RUclips50 as a code for 50% off, for a limited time!
This session will discuss radio communication basics, the differences in operating at towered and non-towered fields, and all about using ATC services like flight following, flight service, and airspace transitions.
I need to watch this 20 times
Lol I was just thinking literally the same thing
Same
This is the video ive been looking for for weeeeeks!!! Thank you guys for all the hard work!
I am watching your video now. It's really great for student pilot in terms of ATC. Thank you so much .
-From South Korea Student pilot Choi.
As a CFI just remember the 4 W's:-) that would have cost you $70 without the Avgas
Thank you gentlemen for a sound content! - student pilot.
Hi guys, congratulations on a well done "live". I appreciate all of you!!!!
Very, very, appreciative of you guys taking the time to make this video. You are helping so many of us by doing this. Thanks again!
Great explanation. Thank you! Just what I need right now.
As far as the vfr in my area I’ve been around my whole province so i know a lot of the landmarks and distance great information in this video very informing
Wow what a great knowledge we have here! I learned a lot! Thanks!
Outstanding job with addressing the most critical issues gents, thank you. I’m definitely going to look for more content from you (subscribed), thanks again for your time 🤙
On the class c airspace I fly at tower and approach/departure are different. Great video! I learned a lot. Thanks for posting.
Great information, still learning. I would like to request when using the mouse arrow against the flight charts if you could use a larger/solid arrow - - it would be easier for me to locate on the computer. Again, I have so enjoyed your presentation.
Fantastic video. I have never flown and I feel like I can anytime.
You do an outstanding job with your educational videos... only one recommended suggestion? Please enlarge your pointer while traveling over sectionals, etc. trying to find your tiny pointer diverts attention from what your saying about the location we couldn’t find that you were referring to.. thanks
very helpful for a student!!! Thank you very much
Excellent video. Definitely this will help many people. Thank you.
the contact ground .9 I've heard a lot and i couldn't find anything about it but that made it clear thank you
Just watched this. Great info. Just to clarify - at 49:45 he says Class D is 5nm in diameter. Generally Class D airspace is 4nm in radius / 8nm diameter. I use the VOR compass circles to quickly measure distance. On a sectional they are 20 nm diameter. On the TAC they equal 10nm diameter
Amazing informative Video! Thank You! Probably saved me a lot of $ in classes!
Great video. I always learn so much from you guys.
Thank you guys for sharing 😊
loved the video. even in 2022 this is helpful for this new pilot
Well done guys!
1:42:12, regarding PilotEdge and VATSIM being "hit or miss". A big distinguishing point between the two is that VATSIM has amateur air traffic controllers where as PilotEdge has professional air traffic controllers (not surprisingly, you have to pay for PilotEdge as a service, though).
Great learning video! Big thanks from Russia!
Sooo informative. Very valuable info.
In San Francisco they cross 2 runways at a time (parallell runways) clearance example: Lufthansa 454, cross runway 01L, 01R, taxi via B rwy 28L
In the case of closely-spaced parallel runways (1L/R and 28L/R at SFO), ATC is allowed to issue multiple crossings.
Great job guys, best video out there, amazing work
Thank you for your really good video, i picked up a lot of information!
Great Video. Thanks.
Thanks
Really good video - Just a few errors to correct if you're interested... (I know Chicago TRACON very, VERY well.)
What a great video! Thank you. 감사합니다.
thanks for sharing ,,great video
Can you please provide a link to the text files used on the video? Thanks for making the video!
Great information guys. Thank you! Who is responsible for maintaining RCAG (ARTCC) transmitter sites?
Excellent video.
Brilliant video. Best I’ve seen on this topic.
Very goog explanation, I learned a lot, and it was a gratefull revision.
wow
great video. great for practice!
Amazing Video! very informative thank you
Any traffic please advise.
WickdPerfekT edez, si?
Loooooool
Good job .. Thanks a lot my friend
Great tutorial thank you
Is it common to radio on behalf of an aircraft in the pattern without a radio in an uncontrolled airport? For example a piper cub is ahead of you and entering 45 on downwind and you say "advisory cub entering pattern left midfield downwind"?
great video... thank you for this!
In 2019 PilotEdge is manned by actual ATC controllers. So its not 'hit or miss'. Its real ATC controllers in a virtual environment.
very informative. thanks so much. any chance we could get a link for Marc Stiller?
Great video ! Very interesting, good work :)
Good job, thanks. 👍
Does ATC to aircraft pilot radio communications vary on the ground of an airport from airport to airport concerning receipt of IFR clearance on designated frequencies such as Clearance Delivery, Ramp, Ground, Apron and Tower? IFR clearances can be obtained from contact with any of these Air Traffic Control units above dependent on the ATC operational procedures in force at that specific airport. Does the pilot of an Airline have to be trained by the Airline as to which ATC unit to contact to obtain the specific clearance required at each airport?
GOOD VIDEO, THANKS. "SADLY" WHEN POINTING ON CHART, "VERY DIFFICULT TO SEE" !!! USE LASER PEN or..???
Who cares stop complaining. This video taught me so much stuff and I don’t really know anything about planes.
I'm just curious if anybody has there SEL/MEL instrument and Commercial?
❤❤❤❤❤
If I need to go from East Ramp to runway 35, what do I say? When do I add the HS when I say it? Manchester Ground Cessna 3 Charlie taxing to Runway 35 via Hotel Foxtrot Alpha Uniform HS Runway 35. Is this wrong?
Thank you so much
I have a question please if a pilot have problems with the radio what is his/her options in any use of code?! Thanks
7600
In what Perspective is this?
Is it Atc or pilot perspective?
Thanks!!
I didn’t know a Cessna can land at airports like PHX doesn’t it take forever to land and stuff due to the amount of jet airliners?
Thank you soooo much for the video, really really helpful :)
Another well done and informative video. Thanks!
Question, I was under the impression that when you contact a controller for the first time you give your full call sign and whatever they shorten it to is what you reply with. At the beginning I heard ground say N123AB along with taxi clearance but the pilot reply was just 3AB. Are we ok to arbitrarily shorten the call sign before they do? Thanks again!
Kris Wood Very detailed response. Clarifies everything! Thanks Kris
Peter Andrego j
What does entering the left 45 to downwind for runway 2 mean?
Look up operating traffic pattern in the AIM
good joob and thanks a lot.
ARE YOU A CFI? OR Ground School instructor? You should post it prominently.
I just fly an MD80 so i look at the TCAS if I need to see traffic
Luxury.
why you dont have cc on this video?
Greats..
Appreciate this but damn the main guy relentlessly saying you know if bothersome
1:26:00
I don't even fly a plane, but great tutorial
Wondering if the owner of this account is still active? I have some questions :)
The main guy saying well here is what ATC will say you know ah ah um cleared you know through the bravo I mean he should say what exactly will be said stop with the you knows
Grand Control to Major Tom…
LAHSO ??? Thanks
Land and hold short operations
Land on a runway and hold short of a crossing runway.
What of the mayday mayday...
Great video except „you know“, „you know“ , „you know“.... no I don’t... that’s why I am here:)))
Sigh
stfu you ungrateful pos
@@user-sh8dk6yp1r You wanna be careful with your assumptions keyboard warrior!!
LET PEOPLE SLEEP BY NOT HONNNKKK LOCKING YOUR CAR.
HOW: PRESS FOB ONCE NOT TWICE
LIGHT FLASH SHOWS CAR LOCKED AND ARMED YOU DO NOT NEED HONK
HO
If the Auto Industry asked you to park outside your neighbor's house at night and HOOONKK HOOONKK would you?
Would you do it day after day after day after day? Then please lock your vehicle Quietly.... No Honk. ... Light Flash Only.... so people can sleep at night and have peace during the day.
The Light Flash Signal confirms your car is locked and armed. You do not need the
HONK. The Auto Industry Really screwed up with this technology. They need to GET RID OF THE HONK. Thank you.
I made it11 minutes in before was bored AF. Cut to the chase and quit talking to hear yourself talk. Some of us have shit to do
B1swoll i disagree, this is comprehensive. Im getting my PPL, this helps
@@gp123lIlI that's cool brother. I am too. I just prefer someone who would shit or get off the pot. Found them on other searches
Too much "uhms" and "you knows"....bad comm skills for an ATC expert. I get that this isn't scripted but please, slow down to think it through better which will make you communicate more smoothly.
Shush it
Hardly a fluency disorder, the information is quite good regardless of the filler words. Play it at x2 speed, that way you'll appreciate the negligible stuttering.
@@domagojvukusic3859 I'll ensure to put all of my day's energies into playing it at 2x speed you idiot
@@DanaFontenot Oh be quiet!
dude..too much "uuum" "uumm" in this conversation. too painful to listen to at times.
It doesn´t get on my nervous. The guy is doing a very good job!
No one asks you to watch it. If you are that good. Make one !!
Sometimes we take things for granted, it's free and great information also keep and mind that this video was done live no script or edited, not bad at all.
This could of cost me about two hrs with an instructor $60 per hour ($120 total) with a lot more uumm's I am sure.
I agree Aranlex. Despite what the guys say below it's just bad communication skills to say "uhhmm" or "you know" all the time. Rather say nothing, think it through a bit more in your head first and save us the pain. He's an ATC expert, no need to be as hesitant as he is.