Craftsman Platinum 7.25 Lawn Mower Won't Start --Briggs & Stratton Carburetor Cleaning and Rebuild
HTML-код
- Опубликовано: 26 июн 2024
- #lawncarebusiness #lawnmower #smallbusiness
I bought my Craftsman Platinum 7.25 190cc lawn mower from a local guy who fixes and resells used ones. It always seemed to be a good lawnmower, but the last few months, it would tend to run for a few minutes and then die.
-Here is the link to a 4-stroke Briggs and Stratton carburetor:
amzn.to/441oJZj
-Here is a spark plug for this Craftsman push mower:
amzn.to/3qDEZkK
-I used this Sea Foam Deep Creep product to clean the cylinder:
amzn.to/42JmIQ9
(These affiliate links will take you to products that, if you purchase them, they will send me a VERY SMALL commission which helps me make more videos. Thanks)
Business Inquiries Email: mountainvids@gmail.com (subject title: Inquiry from RUclips)
Contents in this video:
00:00 -Intro
00:46 -Troubleshooting: inspecting the mower air filter
02:07 -Troubleshooting: inspecting the Briggs and Stratton carburetor
03:39 -Troubleshooting: removing the Craftsman Platinum recoil starter assembly
03:58 -Troubleshooting: inspecting the spark plug
04:39 -Troubleshooting: compression testing the Craftsman piston and cylinder
06:22 -Spraying Seafoam Deep Creep into spark plug hole
08:58 -Removing the B&S carburetor
09:41 -Draining a mower gas tank
10:43 -How to fix a lawn mower carburetor
13:15 --cleaning the carb float bowl drain jets
17:51 -Carb is clean!
18:40 -Reseating the clean lawn mower carburetor
19:39 -Will the mower start? Yes!
The Briggs and Stratton Platinum lawn mower motor wouldn't even start without having me spray starter fluid directly into the carburetor, and then it would stall out. I knew I would have to repair this equipment, or it wouldn't turn over for the rest of the summer!
In this repair video, I show how to do a few things: how to test the compression of the Craftsman mower's engine cylinder, remove and clean the single spark plug, how to clean the Briggs and Stratton carburetor, and how to clean the carbon deposits in the cylinder head with Deep Creep by Sea Foam. All of these efforts ended up getting my mower to start, and it's been running pretty well for an older model Craftsman.
If you need to know how to repair a recoil pull starter assembly, I show how to fix a pull cord in this video: • How to Replace Pull St...
Transcript:
"Oh Hi, welcome to my channel. Today I'm going to be repairing a lawnmower that refuses to start I think something might be gunked up in the carburetor but we're going to take it apart and see if we can get it running consistently so the lawnmower I'm going to be working on is a Craftsman Platinum 7.25 (foot-pounds, not horsepower) 190cc with a Briggs and Stratton. Pretty common motor for these brands, so this one has an electric start push button right here but I tend to start it with this because the battery that I got with this mower doesn't hold a charge very well. I'm going to take the air filter off and check the carburetor behind it and see if I can clean it out see if there's any problems there I'm also going to take out the spark plug and see if that has any problems and maybe clean out the spark plug hole see if the cylinders have compression first things first I'm going to take this air filter off and inspect that
wow that's looking pretty gunky.
I'm going to replace this but for now because I need to mow the lawn today I'm gonna clean this up with some air and then put it back on okay this is what it looks like right now I'm gonna hit some air to it
I'm also going to hit this with a little carb cleaner and put it out in the sun to dry a little bit. Alright, while the filter is drying
try to put them somewhere where you're gonna find them so they don't get lost okay you should be able to just pull this off and looking at this looks like I'm gonna blow this all out with the the compressed air and then we'll see what else is going on blow this out and clean it up a little bit
this is a good time to just I'll spray carb cleaner around just clean up some stuff and then you get yourself a clean rag
clean this stuff up so it doesn't look quite as gunky
and they also spray some carb cleaner in here and work the butterfly
make sure to pat off this gasket though
so just doing that might be enough to be able to start this so I'm going to pull back the Bale I didn't put the the air filter back on I'm just going to let it with a open carburetor and I'm going to try pulling this pull back the Bale and try to keep them at a test pull Хобби
Bought a new home , the mover was sitting in the garage, this video will help to resurrect it back to life, thanks
Yes, yes it will.
Very well made video. Thank you for going through the process and explaining.
Thank you for this
Good job!
1 minute in…yes it’s the air filter. Nastiest dang thing I’ve EVER seen!
Well, it wasn't the problem, but that was pretty nasty.
@@JasonSipe16 my lawnmower I mean
Here is the link to a 4-stroke Briggs and Stratton carburetor:
amzn.to/441oJZj
(This link will take you to a product that, if you purchase it, Amazon will send me a VERY SMALL commission which helps me make more videos. Thanks)
Thank uuuuu
You bet!
Are all the model numbers for that mower the same if so can I have it to order parts my model number is not readable thank you very much
I Googled Craftsman Platinum 7.25 and here is the model number: www.google.com/search?q=craftsman+platinum+7.25+190cc+model+number&client=ms-android-samsung-rvo1&sca_esv=ee66aeb483badbb5&ei=xCllZpz2CNGw0PEPif63-Ak&oq=craftsman+platinum+7.25+190cc+model+number&gs_lp=EhNtb2JpbGUtZ3dzLXdpei1zZXJwIipjcmFmdHNtYW4gcGxhdGludW0gNy4yNSAxOTBjYyBtb2RlbCBudW1iZXIyBRAAGIAEMgsQABiABBiGAxiKBUjDQVDzDlj6KnABeAGQAQCYAYACoAHYDKoBBTkuMi4yuAEDyAEA-AEBmAIOoALODcICChAAGLADGNYEGEfCAg0QABiABBiwAxhDGIoFwgIKEAAYgAQYQxiKBcICDhC5ARiABBhDGIoFGO8EwgIGEAAYFhgemAMAiAYBkAYRkgcGMTAuMS4zoAe4OQ&sclient=mobile-gws-wiz-serp
I have the 725 series but i can not find a manual and google says my searches returned nothing? you would think you could still find a manual 944.362121 so I am guessing these numbers the parts are all different ?
Try this: www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=c.searspartsdirect.com/mmh/lis_pdf/OWNM/1403526L.pdf&ved=2ahUKEwiWlcqBldKFAxW-EjQIHRF3DaYQFnoECBAQAQ&usg=AOvVaw24AKygyLVbdT1kez0c2e9z
Your carb was gunked up.
Yep.
what kind of gasoline does it use? the red cap indicates an 85 with a slash. does it mean use 87 octane or higher? Thank you in advance.
I just use 87 octane with a tad bit of Seafoam in it.
@@JasonSipe16 Oh ok thank you kindly for your reply.
This happens to me about every 3 uses- it’s expensive to keep paying someone to clean the carburetor so, I’m going to try it myself. What a hunk of junk
@@JasonSipe16 I use seafoam in the gas, but it hasn’t really helped
You might also want to make sure that your spark plug is the correct one, and gapped correctly. I've had that happen, where I had a spark plug that I thought was good, and then I changed it out and it immediately fired up.