The best tutorial video on basic recording techniques with an audio interface and GarageBand I have ever seen. You just saved me hours of browsing and helped me avoid a rage episode :)
This is the most comprehensive set of instructions I have ever watched. Now, I am going to purchase Focusrite because I was able to find what I truly need to understand. Thanks, man.
What they don’t tell you is that if you are using an iPad and GarageBand the headphone socket won’t work immediately out the box if you are using headphones at the front, so the trick is to hold down the 48v button for five seconds, pull the power cable out, put the power cable back in so there is power, and once again pull the power out. This should enable the iPad and GarageBand to use the monitor function so you can use the headphone jack properly.
That's right. Scarlett is primarily designed for macOS and Windows PC and will initially be detected as a Mass Storage Device as it ships in 'Easy Start Mode' to make the process of creating an account and accessing the bundled content, as quick and easy as possible. Those who do not want to connect Scarlett to a computer first can manually remove the device from 'Easy Start Mode' using the phantom power button as described. This is covered in the User Guide, apologies if you had not been aware of this. John // Focusrite UK 🇬🇧
Thank you so much. I couldn’t get my 3rd gen working with GarageBand at all without this comment. Focusrite should do a much better job explaining this.
@@ronabrums1506 I used the onboarding that was available out of the box, using the site that you use to download focusrite control, after you register what product you have it takes you through the steps. I was intending to use iPad pro from the start, and when I got to that stage the onboarding told me I either had to connect it to a PC first, or use the manual activation. So I don't know where you are getting your product support from. This was about 3 months ago btw, 3rd gen.
I plugged my headphone into the Scarlett solo gen 3 and hear myself through the headphones just fine, but I can't hear the beat or any sound from my iPad (I connected it with a USB c cable from the iPad charger). The problem is I can't turn on the monitor in Garageband, why??? I'm very new about recording things, pls help.
@@FocusriteHelp okay thanks. I still bought the 2i2 anyway. You make good stuff anyways. Hope there are future improvements for your devices to be fully used by iPad Pro.
@@FocusriteHelp Actually I kinda have the higher model by mistake since it was for recording that I no longer really do so much and then only on PC. Anyway, it all worked fine and it’s a nice and handy device for my iPad. It only really needs doing once if you plan on playing an Inst-level device, which I have now set up and that’s that. What is REALLY useful is that the settings light up once set, so I know what I have even when only on iPad. I might also try Air on the first input…
@@mikesrandomchannel hello there, tell me Ed do the scarlett 4i4 work with an ipad air 4th ? sure has you said we have to setup with a pc before, but then with the ipad can rec with the 4 input? thx for your anwser :)
This was an absolutely fantastic tutorial that I discovered when looking for something else. Would you by any chance know how I would set everything up as is in this video but for it to be used for a Facebook livestream please? I have GarageBand and also Logic Pro for iPad. Do I need extra hardware or software for this?
Thank you for your kind words, we're happy to hear this video helped you. Facebook Live for iOS likely can transmit audio captured from Scarlett, but you will need to check with the developer to see if it can transmit audio from Garageband to the stream via iOS. Please let us know if this helps or if we can answer additional questions.
Nice tutorial! However i did all the steps you did to set up my scarlet solo connected to my iPhone but I can’t turn on the 48v. It automatically switch off after a second I turned on. Do you know how can I fix this issue? Also can I use all this set up to record a normal video and not only a garage band track?
Afraid Scarlett isn't supported for use with iPhone. There are a great many reason why it isn't able to establish a connection with a phone and draw adequate power to function. This video explains how to use Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen with the USB-C iPad Pro. Afraid no other iOS devices or Scarlett audio interfaces are supported. John // Focusrite UK 🇬🇧
Hey, I know its been almost a year, but hopefully you see this! Did you ever find out if it is possible to used the set up directly to record videos with audio using the camera app, or do you need to use garageband/some other DAW? (Assuming all the hardware and device is correct)
Hi Ashwin, the Scarlett interfaces are not supported on Android. While we do not directly support this, it may be possible to use a third-party driver.
Hello Question! I just purchased a new 3rd Gen Scarlett 2i2, and I’ll mainly be using it along with a Rode NT1 microphone to record voice over audio to edit on my MacBook. Separately though, I’m going to be using my iPhone to film some videos for RUclips, and I want to use the audio from my fancy mic and Scarlett 2i2 instead of the iPhone’s audio. Would I basically follow this same process? Thanks for the video!
Amazing video! I was just about to buy a new interface for my iPad and decide to see if their was a way to use my Scarlett 2i2 with my iPad!! Happy I found this. I have a couple questions tho, 1. My iPad is a newer model but doesn’t have a usb c charger it’s the original one. I looked it up and found these cheap usb to regular iPad port. Would this still work or is data transferred different? 2. Alternatively my iPhone is usb c so I can always suck it up and do it on their 💁♂️. I’m a professional guitar loop creator and this lets me bring my work in the road, anywhere I go! Very excited if this works it’ll be a total game changer for me! Thank you for showing us how this process works! It’s really amazing how far technology has come and it’s only getting better, their has never been a better time to be a musician! Thank you again for the great video 🤌 - Alex
That may work, in theory, but please be aware, when it comes to iPad compatibility, only the USB-C iPad Pro is supported and this support is limited specifically to Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen, connecting as shown in the video. Whilst using other Scarlett audio interfaces with other iOS devices, such as Lightning iPads may be possible in theory, it isn't something that we're officially able to support. Results can vary, especially if using a third-party connection kit. Similarly, afraid none of our current products are designed or supported for use with iPhone.
I have a 5th gen iPad with a lightning cable and, today, I made it work. First, this isn't to disagree with the rep's statement below, and there was some work around, so clearly not a supported feature, yet possible. I got a small lightning to USB and lightning hub, but that wasn't enough power to make the Scarlett functionable. So I got a hub that allowed charging, yet it didn't allow lightning. However, if I combined these ... from iPad to small lightning hub ... with the lightning going to power, and the USB feed out going to main USB in the other USB hub. Then, the Scarlett is connected to a USB port on that second hub which support charging ... and it works and sends signal as desired. Good luck!
Thank you! I'm glad I got 3rd gen now that I upgraded my ipad. Also, does the app or focusrite device control the gain regardless of music app one connects?
Which Scarlett audio interface do you have? There are dedicated Gain controls located on the hardware. Focusrite Control on Mac and Windows PC will essentially function like a remote control, providing access to hardware features that don't have physical controls. There isn't currently an iOS app that can function this way but Scarlett is able to pass audio to and from apps when successfully connected to iPad as it's a USB class compliant device.
@@FocusriteHelp Thanks so much! I was able to connect to garageband and to SMULE. I'm very happy with the 3rd gen Focusrite and can't believe what I've been missing out on with the old iPad. I am keen to just simplify my process for content I want to post. Thanks for the follow up!
Hey Jeri Ann, latency is very subjective based on individual systems and use cases. While we recommend direct connection, we also see excellent latency performance with a variety of hubs.
Good tutorial. Learnt a lot. The only thing that I still wonder is how many track the 4i4 can deliver simultaneously to Garageband. I bought it for two, but need to record a trio. Is that possible?
Hi Audun, yes this is possible but the inputs 3-4 are designed for line-level inputs, so you may need to use a DI box to boost the signal if recording an instrument/mic. A line-level input such as most keys/synths should be fine into 3-4 though.
No, afraid that isn't possible. Similarly to when using Scarlett with Mac or Windows PC, when connect to iPad, Scarlett essentially replaces the internal sound card. All audio passes through Scarlett. John // Focusrite UK 🇬🇧
At this time it does not seem possible for internal audio to be shared over Zoom via the iOS app. Using Zoom on a Mac or Windows computer however allows you to share microphone audio from your interface, as well as high-quality, stereo computer audio. Please let us know if this helps or if we can answer additional questions.
@@FocusriteHelp thank you for your response - we are not trying to 'share iPad sound' we have the music connected via bluetooth to the Scarlet itself and can hear the music in the headphones wired into the Scarlet however the people on the zoom call cannot hear the music. Original sound is enabled in zoom. The microphone connected to the Scarlet works great and can heard by the people in zoom.
Are you sharing the music from a separate device from your iPad? Scarlett's do not have Bluetooth connectivity, only our Vocasters do. If you are sharing from a separate device, it may be best to connect that to your Scarlett with a cable that can connect to the TRS inputs on Scarlett. I'm not sure I fully understand your setup however, it may be best to reach out to our support team to discuss this further. You can reach them via email, chat, or phone at the link below: bit.ly/FocusriteSupport
@@FocusriteHelp I appreciate your response. We are directly connecting a bluetooth receiver into the instrument input on the Scarlet through a wired connection...
In that case, this setup should work. You may need to check Zoom iOS audio interface compatibility, but no loopback is required if you are sending audio via a receiver into one of the inputs. You also may need to see if iOS zoom can accept two inputs from an interface, if you are using a 4th gen Scarlett you can combine the two inputs digitally. Please let us know if this makes sense or if we can answer additional questions.
Hello Focusrite! Amazing content, learnt alot! Was wondering since i am making a podcast where i will need 3 microphones. Was thinking to buy the 18i8 but maybe 4i4 would be enough? Also? Would garage band be able to recieve 3 inputs at the same time? Say three microphones? Someone told me that iPad can maximum do 2 inputs?? Thanks again! :D
Apple does not specify the number of tracks possible for multi-tracking on GarageBand IOS, this article goes into some detail. support.apple.com/guide/garageband/record-to-multiple-audio-tracks-gbnd5f260581/mac We have tested and confirmed USB-C iPad compatibility with a range of our interfaces. Some of our larger interfaces have not been tested, but are expected to work with USB-C iPads. This article goes into more detail about our compatibility. support.focusrite.com/hc/en-gb/articles/360002662100-Can-I-use-my-audio-interface-with-my-USB-C-iPad-Pro- If you have additional questions please don't hesitate to reach out to Our Help center at the link below. bit.ly/FocusriteSupport
I have 18i20 2nd gen, and it works fine for recording on iPad , only issue is iPad monitoring stops after few mins and I only have to rely on direct monitoring from 18i20. Though recording works just fine on iPad !!
Hi, thank you for this video!😊Just wondering if you can plug your ipad straight into the audio interface without using the mains power for charging. Thank you☺️
This does vary by iPad, while some iPads may be able to power the Scarlett without the need for power delivery, we cannot guarantee this will work. For best performance, we recommend using a hub with power delivery.
@@FocusriteHelp could you tell me what to do: I’ve got older version of ipad with lightening. And it doesn’t work when I connect from scarlett to the ipad. What to do in this case? Should I find usb hub with lightening in the end?
Thank you for this video. I recently got the donner interface and I’ve noticed some annoying latency when recording electric guitar in GarageBand. I’m using the m1 iPad Pro so it shouldn’t give this latency. Any suggestions on how to correct this? Thank you so much.
Hello, my question is how can I connect the 8th generation edition of Ipad 2020 with the 3rd generation scarlet solo? The input of the Ipad is not usb-c. Is there any way to connect the two devices? Thanks! :)
If your iPad features Lightning connectivity, in theory you should be able to connect successfully using an official Apple Lighting to USB 3 camera adapter or an official Apple USB to Lightning Adapter and a powered USB hub, to power your Scarlett. We explain how to connect in this Help Centre article - support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-
Thank you for doing this video but, as a newbie to Garage Band this didnt work for me at all. First of all, i wanted to record a non electric acoustic guitar using a Shure M57 mic while using another mic for vocals. I dont have an electric guitar. There is no selection process to choose this in the scroll display. I am closing down and ordering a printed guide. Thank You.
Hi there, you should be able to do this without issue. Not sure what you mean by printed guide, but feel free to reach out to our Support Team for assistance and bit.ly/FocusriteSupport. We're happy to help get you up and running.
@@FocusriteHelp Thanks Guys. I may do that. My comment was not really related to a FocusRite problem except this product was supposed to allow download of Ableton Lite which has a simpler navigation process. However, the FocusRite Control software is a .dmg file which iPad Pro cannot handle? My comments were directed at the Video author and GarageBand particularly. The “guide” I have ordered is a printed step by step guide for GarageBand navigation for IOS and iPad Pro. Thank you for answering.
Couple Questions: 1. Which Anker adapter did you use for this? 2. Do I absolutely need garage band? I was planning on recording myself playing piano with the regular camera, I've seen people do this with the older ipad models but I'm not sure if it'd work with USBC models.
Here we used an 'Anker PowerExpander+ 7-in-1 USB-C PD Ethernet Hub' but any good-quality, powered USB hub should work well. No. When connected successfully, Scarlett will be able to pass audio into any compatible audio app. You can certainly record audio straight into the camera app. If you're using a USB-C iPad, you may find that you can simply connect directly using that connection. Generally speaking, USB-C iPads are able to provide sufficient power for Scarlett to function.
Thanks for the video. I'm setting up a project studio around a 2021 iPad Pro (M1) with Garage Band. Can you confirm that the Focusrite 2i2 3rd Gen will allow you to record vocals/guitar live to garage band while also monitoring the output of Garage Band sequencer tracks and/or live instruments WITHOUT having to use Audiobus 3 > AUM? Thanks!
Our Support Team can certainly help you with that. Please give them a call or use the Live Chat feature to discuss this today - bit.ly/FocusriteSupport
Great video 🙏 Thank you so much. Is there a way if we can plug a usb midi also, like the way we can use it in old Focusrite iTrack Dock? I was using that and now I can’t because I upgraded my iPad mini to iPad Air which is with type C. Is there any similar product iTrack Dock for iPad Air, through which I can use USB midi, Two mic at least? Or is there any solution if I can use my iTrack Dock with my new iPad? I am unable to find any valuable information.
Glad you found this interesting, Muki. In theory, a Scarlett 2i2 setup like this one could be a solution for you. None of our current audio interfaces feature a dedicated USB MIDI input, like the one found on iTrack Dock, but If you purchase a USB-C hub with power delivery like the one shown in this video, you may find that your USB MIDI device is able to establish a connection with the iPad if it is also connected to the USB-C hub. I should point out that this isn't something we've tested and so isn't officially supported. Also, in terms of current iPad compatibility, only the USB-C iPad Pro is supported for use with Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen. John // Focusrite UK 🇬🇧
I have a 18i8 3rd model. When i take it out side to recording live band with my ipad, but it want to connect to computer to use Focusrite control app. This is so stupid. How can i bring all my computer and screen to recording live band? And if i have a computer near me, i don't need control app for anything either.
what adapter/hub would be best to use for usb-c ? the apple one or the anker that you use in the video? i know that not all of them are great to use. I wonder if the hub affects recording because I either can't hear my recording at all or only out of one ear. please help! thank you!!
The only requirement is you need a USB-C hub that also features "Power Delivery" Meaning it can also be connected to power while passing data to and from the iPad and the Scarlett.This help article explains the process in greater detail. support.focusrite.com/hc/en-gb/articles/360012532199-How-to-connect-your-USB-C-iPad-with-your-3rd-Generation-Scarlett-Audio-Interface This is one of the many examples that would work: www.amazon.com/QGeeM-Delivery-Compatible-Thunderbolt-Chromebook/dp/B07QXMNF1X/ref=sr_1_5?crid=345EPU5A1U6B7&keywords=usb-c+ipad+hub+power&qid=1677713216&sprefix=usb-c+ipad+hub+pow%2Caps%2C69&sr=8-5
I have an iPad Air 4 which has USB C port. I also have Scarlett 2i2 (first generation)...So my questions are 1) Will I be able to connect my 1st gen Scarlett 2i2 to my iPad Air 4? 2) Will I be able to connect midi keyboard as well?
In terms of iOS compatibility, only Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are officially supported, specifically when used with the USB-C iPad Pro. That said, we would expect Scarlett to be able to transmit audio when connected to other models, providing it has adequate power, as Scarlett are USB class compliant devices. Whether or not an additional USB device will be able to draw sufficient power and also establish a connection with your iPad will depend on how you choose to connect and provide power. You may find that a powered hub of some kind works well.
hello, I recently bought the Scarlett 4i4 , and wanted to record directly the Video from my Iphone 11 without going through Garage Band and having to Export and put Video and Sound together. I bought too the Iphone USB-C cable + Lightning to ensure it works, sadly not. By the Focusrite Control App, it always said the connection failed or I should update altough it's already done. Is the 4i4 for iphone suitable ? or do you please have a Solution. Thank you !
@@safidyrakotomavo9939 I managed to fix mine today! our Scarlet 4i4 needs more power, and our 1iphone 11 is not enough! So I ordered a Powered USB HUB. with all the cables yu need in this video... This is what I ordered, and it's finally worked ... www.amazon.co.uk/gp/product/B08R5KZD5S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Olá! Tenho uma Scarlett 2i4 e gostaria de saber e ela é compatível para conectar com o iPad. A outra pergunta é se o IPad 9 pode fazer essa conexão com alguma interface. Grata ✨
Apenas Scarlett Solo e Scarlett 2i2 3rd Gen são suportados com iPad, especificamente iPads USB-C, pois fornecem fonte de alimentação adequada e consistente. Como requer mais energia, a Scarlett 2i4 pode não funcionar como você espera, mas em teoria, se você usar um hub USB alimentado separado, ela pode se conectar com sucesso. John // Focusrite UK 🇬🇧 Eu usei o google tradutor
@focusritehelp Of i have this connected directly to the iPad and it’s on the magic keyboard which is charging also... will that be enough power? Or should I use the dongle method provided in the video?
Hey James, this applies to the iPad Pro with the USB C; you can connect Scarletts to a lightning iOS device: support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-
@@FocusriteHelp we need a focusrite control app on iPad. As I’ve said in a reply to another comment about this, I had the 4i4 in my Amazon cart ready to buy but after watching this video I have to buy 2i2 cos I only own an iPad.
Solo se admite iPad USB-C. Es posible que otros dispositivos no puedan proporcionar suficiente energía, pero hemos escrito un artículo que explica cómo puede conectarse con éxito: support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port- John // Focusrite UK 🇬🇧 con el traductor de Google
The only way this would be possible would be to connect the iPad audio output to the Scarlett via a 3.5mm to TRS adapter such as the one linked below: www.amazon.com/Hosa-HMP-006Y-3-5mm-Stereo-Breakout/dp/B0084O7FPM/ref=asc_df_B0084O7FPM/?tag=hyprod-20&linkCode=df0&hvadid=692875362841&hvpos=&hvnetw=g&hvrand=16507404823270687225&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003488&hvtargid=pla-2281435181738&psc=1&mcid=235736ecf9213e91ad2f7a4cca9db921&hvocijid=16507404823270687225-B0084O7FPM-&hvexpln=73 However, if there is a way to export these sounds from your iPad as audio files, and import them to your GarageBand session, this would offer higher audio quality. Please let us know if this makes sense or if we can answer additional questions.
Hi, this article explains in detail how to connect a lightning port iOS device to your Scarlett. Please let us know if this helps or if we can answer additional questions: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices
Hiya. Hoping you can help, as Thomann can't give me a definitive answer. I would like to get the Focusrite Scarlett Solo 3rd Gen for my husband. He has an iPad 9th Gen [OS 17.7]. Are they compatible, please? I've no idea what I'm doing, but your video suggests to me that it may be possible.
Scarlett 3rd Gen isn't specifically designed for use with iPad but in theory, it can pass audio successfully and work well if connected using a powered USB hub, as shown here. Generally speaking, the iPad won't be able to provide sufficient power for Scarlett to function but a hub, like the Anker product shown here should work well.
After connecting everything as you showed in the video my iPhone 12 max w/ iOS 15.5 is still saying the 2i2 requires too much power and is not working. How can I fix this?
Is it possible to use the Scarlett with the iPad/iPhone for listen to Tidal or other streaming service with my monitors? I often switch from my recordings to other music to relax…
@@FocusriteHelp thanks a lot, I love studio monitors for listening (apart from monitoring) but they didn’t work well with my Ifi Zen DAC. I think it was because of analogue control of volume of the line out by the DAC that complicates the path signal. I believe that Scarlett or other audio interfaces regulate the volume BEFORE conversion providing a fixed line output signal
The Scarlett devices will work out of the box, but to get the full functionality (such as sample rates above 48kHz, MIDI on selected units) it is necessary to connect the Scarlett 3rd Gens with Focusrite Control on a PC/Mac platform to initialise them. You can then continue to use the unit with iOS without further need for Focusrite Control. As shown in the video, for the 4i4 interfaces and above, functions such as configuration of the channel inputs need to be administered in Focusrite Control on a PC/Mac
@@FocusriteHelp if I buy a 3rd gen Scarlett solo , will I be able to configure it for 192khz compatibility on my windows computer with focusrite control (no DAW) - and then plug it into my iPad 2020 and I’ll have permanent 192khz / 24 bit ability ? Thanks
Do you found the solution for multi input connection? I’d like to record drums with an iPad from a 18i20 (1st gen), but don’t know how to solve the multichannel input issue. Thanks!
Ok so to be clear, I cannot use my 1st gen Scarlett 2i2 with my gen 4 ipad? It doesn’t work so I’m guessing I need to upgrade to a 3rd gen Scarlett? I just wanted to trouble shoot everything before I run out and buy another interface…
That's correct, 1st Gens are not tested or supported on iPad. Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are tested and supported with any iPad Pro with USB-C port. Here's more info: bit.ly/3yHVSuo Bri // Focusrite US 🇺🇸
I attached the i8i8 to my iPad Pro. When using garage band, I can't hear any input or playback. I enabled the monitoring function. Any help is appreciated.
We're sorry to hear you are having trouble. There are several possible causes for that issue, so it would be best for you to contact our support team for further assistance. They can be reached at the link below: bit.ly/FocusriteSupport
When I record in this manner, I get sound from the mic in channel 1, but nothing from my guitar in channel 2. The lines are showing up, showing it’s picking up sound, but nothing comes out. Help!
Please help! Will this whole setup work with an IPad Pro 12.9inch 3rd Generation 2018? what USB-C HUB do you recommend for my Ipad Version? Thank you so much!🙏🏻🙏🏻🙏🏻
Yes you can, however, you do need a few adapters. Please refer to this article that explains the full connection process. You will need a USB hub that allows power delivery and a lightning-to-USB adapter. support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-
Focusrite interfaces are tested and proven to provide high-quality recordings on Windows, Mac, and iOS devices. This setup should absolutely work, please let us know if we can answer any additional questions.
In terms of iPad compatibility, only Scarlett 2i2 3rd Gen and Scarlett Solo 3rd Gen are supported for use with the USB-C iPad Pro only - focusrite.com/en/news/focusrite-sound-now-ipad-pro#:~:text=Now%20you%20really%20can%20record,Focusrite%20sound%20wherever%20you%20go.
Can the iPad Air handle the power draw of the Scarlett AND a condenser mic (XLR)? Or do you need the USB hub thingy? I was thinking of getting a Scarlett but wasn't sure of its power needs.
The bus-powered Scarletts will need a powered USB hub to draw power - it won't be able to draw power solely from your iPad. Here's more info: bit.ly/3a8YqoL Hope this helps!
@@FocusriteHelp I discovered indeed that the Apple - USB Type-C Digital AV Multiport Adapter works just fine. I plugged the power cord into the outlet, and it can sustain the Scarlett and a condenser mic just fine.
Is it safe to use? i mean, isn't there any possibility of mismatch of voltages when using the phantom 48v? for example, if i want to use the microphone xlr, a line in to a piano and the headphones?
Which Yamaha keyboard do you have? With your Scarlett connected to a Mac, Windows PC or USB-C iPad via USB, you should find that you can connect the audio output from your Yamaha keyboard to an audio input on your audio interface, using a suitable cable, such as a 1/4" TRS jack cable.
Hi there! Not entirely sure what Apple product you might need here. Most people use the 18i20 to record drums with a DAW on either a laptop like a Macbook Pro or with a Mac Mini (or a Windows machine if they prefer). If you'd like more help with your setup please reach out at bit.ly/FocusriteSupport.
Unfortunately, there is no way for Focusrite control to configure your interface from an iPad. If you would like to configure your interface for settings like air and INST level, you would need to first connect the device to a computer, configure via desktop, then disconnect and record into an iPad. Please let us know if this helps or if you have additional questions.
THIS is how a "how to" video should be done. He avoided EVERY bad habit present in just about every video we see.
lol true. fuckin quality video lol.
Clear. Concise. Thank you.
The best tutorial video on basic recording techniques with an audio interface and GarageBand I have ever seen. You just saved me hours of browsing and helped me avoid a rage episode :)
This is the most comprehensive set of instructions I have ever watched. Now, I am going to purchase Focusrite because I was able to find what I truly need to understand. Thanks, man.
Happy to hear this video was helpful! Please let us know if we can answer additional questions.
This was huge for me!! Thanks for such a great tutorial
You're so welcome!
What they don’t tell you is that if you are using an iPad and GarageBand the headphone socket won’t work immediately out the box if you are using headphones at the front, so the trick is to hold down the 48v button for five seconds, pull the power cable out, put the power cable back in so there is power, and once again pull the power out. This should enable the iPad and GarageBand to use the monitor function so you can use the headphone jack properly.
That's right. Scarlett is primarily designed for macOS and Windows PC and will initially be detected as a Mass Storage Device as it ships in 'Easy Start Mode' to make the process of creating an account and accessing the bundled content, as quick and easy as possible. Those who do not want to connect Scarlett to a computer first can manually remove the device from 'Easy Start Mode' using the phantom power button as described. This is covered in the User Guide, apologies if you had not been aware of this.
John // Focusrite UK 🇬🇧
Thank you so much. I couldn’t get my 3rd gen working with GarageBand at all without this comment. Focusrite should do a much better job explaining this.
@@ronabrums1506 I used the onboarding that was available out of the box, using the site that you use to download focusrite control, after you register what product you have it takes you through the steps. I was intending to use iPad pro from the start, and when I got to that stage the onboarding told me I either had to connect it to a PC first, or use the manual activation. So I don't know where you are getting your product support from. This was about 3 months ago btw, 3rd gen.
What about Bluetooth headphones will they work with out the extra steps?
My headphone jack works when I plugged it in half, but thanks, will try this one too.
Thank you so much for this. This is a perfect example of how to make a tutorial video. Great job!
Love the way you explain. Short and sweet. Nice tutorial really helpful. Got everything from setup to recording in one video.Thanks
Very helpful. You may want to add Garage Band into your title since it is a also a tutorial as well.
Yes very well done video. A lot of people could learn from this when posting videos. Exactly what I wanted to know.
Thank you so much for making this video. Your language & presentation is so simple & easy to follow.🤟🏻🤟🏻🤟🏻🤟🏻
This is the best video I have found so far. Thanks so much.
Thanks for watching!
Recently purchased Focusrite Scarlett Studio, very helpful video in setting up the audio interface with your IPhone.
Amazing clarity 👏
Thanks very much for this video. Straight to the point and very effective.
Can someone confirm if this audio interface works with iPad 6 generation? I appreciate if someone can help me with that.
I plugged my headphone into the Scarlett solo gen 3 and hear myself through the headphones just fine, but I can't hear the beat or any sound from my iPad (I connected it with a USB c cable from the iPad charger). The problem is I can't turn on the monitor in Garageband, why??? I'm very new about recording things, pls help.
Great video!! Thank you.😊
Fantastic tutorial. Thank you!
That was helpful, thanks a lot ^^
Nice tutorial. An app to change the settings on 4i4s and above would be really useful. Having to change these on a PC is a bit of a pain.
I had a 4i4 in my Amazon cart but I have to now buy a 2i2 after watching this video cos I only own an iPad.
Afraid that isn't planned as only the bus powered Scarlett 3rd Gen devices (Solo and 2i2) are supported for use with the USB-C iPad Pro.
@@FocusriteHelp okay thanks. I still bought the 2i2 anyway. You make good stuff anyways. Hope there are future improvements for your devices to be fully used by iPad Pro.
@@FocusriteHelp Actually I kinda have the higher model by mistake since it was for recording that I no longer really do so much and then only on PC. Anyway, it all worked fine and it’s a nice and handy device for my iPad. It only really needs doing once if you plan on playing an Inst-level device, which I have now set up and that’s that. What is REALLY useful is that the settings light up once set, so I know what I have even when only on iPad. I might also try Air on the first input…
@@mikesrandomchannel hello there, tell me Ed do the scarlett 4i4 work with an ipad air 4th ?
sure has you said we have to setup with a pc before, but then with the ipad can rec with the 4 input?
thx for your anwser :)
Great tutorial. Thanks for your help!
Amazing video!!
Would you be able to use a mic connected to a Focusrite in a zoom call on an ipad?
On point and very helpful. Thanks 😊
This was an absolutely fantastic tutorial that I discovered when looking for something else. Would you by any chance know how I would set everything up as is in this video but for it to be used for a Facebook livestream please? I have GarageBand and also Logic Pro for iPad. Do I need extra hardware or software for this?
Thank you for your kind words, we're happy to hear this video helped you. Facebook Live for iOS likely can transmit audio captured from Scarlett, but you will need to check with the developer to see if it can transmit audio from Garageband to the stream via iOS. Please let us know if this helps or if we can answer additional questions.
FANTASTIC Video!:)
This helps me.. Thanks for uploading
Glad to hear that!
Nice tutorial! However i did all the steps you did to set up my scarlet solo connected to my iPhone but I can’t turn on the 48v. It automatically switch off after a second I turned on. Do you know how can I fix this issue?
Also can I use all this set up to record a normal video and not only a garage band track?
Afraid Scarlett isn't supported for use with iPhone. There are a great many reason why it isn't able to establish a connection with a phone and draw adequate power to function. This video explains how to use Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen with the USB-C iPad Pro. Afraid no other iOS devices or Scarlett audio interfaces are supported.
John // Focusrite UK 🇬🇧
@@FocusriteHelp oh now it make all sense. Thank you so much for your promptly reply! Happy new year!
@@sasazola i was having this issue and the solution was buying a 3.0 usb otg adapter! I was using a 2.0…
Hey, I know its been almost a year, but hopefully you see this! Did you ever find out if it is possible to used the set up directly to record videos with audio using the camera app, or do you need to use garageband/some other DAW? (Assuming all the hardware and device is correct)
Thank you so much 🙂🙏
Explained very well, easily understandable 🙂👍
⭐⭐⭐⭐⭐
Do you have similar video instructions for android phone connection with focusrite 3rd gen? Thanks
Hi Ashwin, the Scarlett interfaces are not supported on Android. While we do not directly support this, it may be possible to use a third-party driver.
@@FocusriteHelp really?? i just connected my 2i2 on my S10 and it works.
Thanks so so much ❤❤❤❤
Hello Question! I just purchased a new 3rd Gen Scarlett 2i2, and I’ll mainly be using it along with a Rode NT1 microphone to record voice over audio to edit on my MacBook. Separately though, I’m going to be using my iPhone to film some videos for RUclips, and I want to use the audio from my fancy mic and Scarlett 2i2 instead of the iPhone’s audio. Would I basically follow this same process? Thanks for the video!
Eres excelente explicación, al fin pude grabar ¡ MUCHAS GRACIAS ¡
I bought a lightning to usb-c cable to plug into my iPad it didn’t work do I need drivers?
I just got one thanks
great video! thanks
Amazing video!
I was just about to buy a new interface for my iPad and decide to see if their was a way to use my Scarlett 2i2 with my iPad!! Happy I found this.
I have a couple questions tho,
1. My iPad is a newer model but doesn’t have a usb c charger it’s the original one. I looked it up and found these cheap usb to regular iPad port. Would this still work or is data transferred different?
2. Alternatively my iPhone is usb c so I can always suck it up and do it on their 💁♂️.
I’m a professional guitar loop creator and this lets me bring my work in the road, anywhere I go! Very excited if this works it’ll be a total game changer for me!
Thank you for showing us how this process works!
It’s really amazing how far technology has come and it’s only getting better, their has never been a better time to be a musician!
Thank you again for the great video 🤌
- Alex
That may work, in theory, but please be aware, when it comes to iPad compatibility, only the USB-C iPad Pro is supported and this support is limited specifically to Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen, connecting as shown in the video.
Whilst using other Scarlett audio interfaces with other iOS devices, such as Lightning iPads may be possible in theory, it isn't something that we're officially able to support. Results can vary, especially if using a third-party connection kit. Similarly, afraid none of our current products are designed or supported for use with iPhone.
I have a 5th gen iPad with a lightning cable and, today, I made it work. First, this isn't to disagree with the rep's statement below, and there was some work around, so clearly not a supported feature, yet possible. I got a small lightning to USB and lightning hub, but that wasn't enough power to make the Scarlett functionable. So I got a hub that allowed charging, yet it didn't allow lightning. However, if I combined these ... from iPad to small lightning hub ... with the lightning going to power, and the USB feed out going to main USB in the other USB hub. Then, the Scarlett is connected to a USB port on that second hub which support charging ... and it works and sends signal as desired. Good luck!
Hello, can i connect scarlett to ipad with only cable (c to c)?
Thank you! I'm glad I got 3rd gen now that I upgraded my ipad. Also, does the app or focusrite device control the gain regardless of music app one connects?
Which Scarlett audio interface do you have? There are dedicated Gain controls located on the hardware. Focusrite Control on Mac and Windows PC will essentially function like a remote control, providing access to hardware features that don't have physical controls. There isn't currently an iOS app that can function this way but Scarlett is able to pass audio to and from apps when successfully connected to iPad as it's a USB class compliant device.
@@FocusriteHelp Thanks so much! I was able to connect to garageband and to SMULE. I'm very happy with the 3rd gen Focusrite and can't believe what I've been missing out on with the old iPad. I am keen to just simplify my process for content I want to post. Thanks for the follow up!
Does using the external hub add any latency? Or does using any type of adapter add latency?
Hey Jeri Ann, latency is very subjective based on individual systems and use cases. While we recommend direct connection, we also see excellent latency performance with a variety of hubs.
¡Excellent! THANK YOU.
Well done, thanks!
Can i connect a midi keyboard to my ipad and this connected with it and will i hear in in my headphones with that audio interface please help
Hi yes as long as you have a virtual instrument set up in your recording software this sound can be output via the Scarlett
Thx
Good tutorial. Learnt a lot. The only thing that I still wonder is how many track the 4i4 can deliver simultaneously to Garageband. I bought it for two, but need to record a trio. Is that possible?
Hi Audun, yes this is possible but the inputs 3-4 are designed for line-level inputs, so you may need to use a DI box to boost the signal if recording an instrument/mic. A line-level input such as most keys/synths should be fine into 3-4 though.
Thank You,Very informative.Much appreciated 👊🏻
Glad it was helpful!
may I ask can we use iPad native speaker as sound output?
No, afraid that isn't possible. Similarly to when using Scarlett with Mac or Windows PC, when connect to iPad, Scarlett essentially replaces the internal sound card. All audio passes through Scarlett.
John // Focusrite UK 🇬🇧
Hi - what about setting up for a live zoom session? With the scarlet and sharing music to lead a meditation?
At this time it does not seem possible for internal audio to be shared over Zoom via the iOS app. Using Zoom on a Mac or Windows computer however allows you to share microphone audio from your interface, as well as high-quality, stereo computer audio. Please let us know if this helps or if we can answer additional questions.
@@FocusriteHelp thank you for your response - we are not trying to 'share iPad sound' we have the music connected via bluetooth to the Scarlet itself and can hear the music in the headphones wired into the Scarlet however the people on the zoom call cannot hear the music. Original sound is enabled in zoom. The microphone connected to the Scarlet works great and can heard by the people in zoom.
Are you sharing the music from a separate device from your iPad? Scarlett's do not have Bluetooth connectivity, only our Vocasters do. If you are sharing from a separate device, it may be best to connect that to your Scarlett with a cable that can connect to the TRS inputs on Scarlett. I'm not sure I fully understand your setup however, it may be best to reach out to our support team to discuss this further. You can reach them via email, chat, or phone at the link below:
bit.ly/FocusriteSupport
@@FocusriteHelp I appreciate your response. We are directly connecting a bluetooth receiver into the instrument input on the Scarlet through a wired connection...
In that case, this setup should work. You may need to check Zoom iOS audio interface compatibility, but no loopback is required if you are sending audio via a receiver into one of the inputs. You also may need to see if iOS zoom can accept two inputs from an interface, if you are using a 4th gen Scarlett you can combine the two inputs digitally. Please let us know if this makes sense or if we can answer additional questions.
Hello Focusrite! Amazing content, learnt alot! Was wondering since i am making a podcast where i will need 3 microphones. Was thinking to buy the 18i8 but maybe 4i4 would be enough? Also? Would garage band be able to recieve 3 inputs at the same time? Say three microphones? Someone told me that iPad can maximum do 2 inputs?? Thanks again! :D
Apple does not specify the number of tracks possible for multi-tracking on GarageBand IOS, this article goes into some detail.
support.apple.com/guide/garageband/record-to-multiple-audio-tracks-gbnd5f260581/mac
We have tested and confirmed USB-C iPad compatibility with a range of our interfaces. Some of our larger interfaces have not been tested, but are expected to work with USB-C iPads. This article goes into more detail about our compatibility.
support.focusrite.com/hc/en-gb/articles/360002662100-Can-I-use-my-audio-interface-with-my-USB-C-iPad-Pro-
If you have additional questions please don't hesitate to reach out to Our Help center at the link below.
bit.ly/FocusriteSupport
Beautiful 👏 thank you so much 😊
I have 18i20 2nd gen, and it works fine for recording on iPad , only issue is iPad monitoring stops after few mins and I only have to rely on direct monitoring from 18i20. Though recording works just fine on iPad !!
Hi there! We're happy to help troubleshoot this - please reach out at bit.ly/FocusriteSupport.
One question! Can you download the focusrite plug ins on to the ipad pro?
No
Can I connect the audio interface and the midi keyboard to the Anker hub at the same time? Does Anker hub have enough power for both?
I need answer for this
Hi, thank you for this video!😊Just wondering if you can plug your ipad straight into the audio interface without using the mains power for charging. Thank you☺️
This does vary by iPad, while some iPads may be able to power the Scarlett without the need for power delivery, we cannot guarantee this will work. For best performance, we recommend using a hub with power delivery.
@@FocusriteHelp could you tell me what to do: I’ve got older version of ipad with lightening. And it doesn’t work when I connect from scarlett to the ipad. What to do in this case? Should I find usb hub with lightening in the end?
BTW very good tutorial!!!
What is the process to record keyboard notes? Same as how you recorded the guitar?
Thank you for this video. I recently got the donner interface and I’ve noticed some annoying latency when recording electric guitar in GarageBand. I’m using the m1 iPad Pro so it shouldn’t give this latency. Any suggestions on how to correct this? Thank you so much.
We'd suggest that the Donner team would be the best point of contact for assistance with that.
Hello, my question is how can I connect the 8th generation edition of Ipad 2020 with the 3rd generation scarlet solo?
The input of the Ipad is not usb-c.
Is there any way to connect the two devices?
Thanks! :)
If your iPad features Lightning connectivity, in theory you should be able to connect successfully using an official Apple Lighting to USB 3 camera adapter or an official Apple USB to Lightning Adapter and a powered USB hub, to power your Scarlett.
We explain how to connect in this Help Centre article -
support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-
Thank you for doing this video but, as a newbie to Garage Band this didnt work for me at all. First of all, i wanted to record a non electric acoustic guitar using a Shure M57 mic while using another mic for vocals. I dont have an electric guitar. There is no selection process to choose this in the scroll display. I am closing down and ordering a printed guide. Thank You.
Hi there, you should be able to do this without issue. Not sure what you mean by printed guide, but feel free to reach out to our Support Team for assistance and bit.ly/FocusriteSupport. We're happy to help get you up and running.
@@FocusriteHelp Thanks Guys. I may do that. My comment was not really related to a FocusRite problem except this product was supposed to allow download of Ableton Lite which has a simpler navigation process. However, the FocusRite Control software is a .dmg file which iPad Pro cannot handle? My comments were directed at the Video author and GarageBand particularly. The “guide” I have ordered is a printed step by step guide for GarageBand navigation for IOS and iPad Pro. Thank you for answering.
Couple Questions:
1. Which Anker adapter did you use for this?
2. Do I absolutely need garage band? I was planning on recording myself playing piano with the regular camera, I've seen people do this with the older ipad models but I'm not sure if it'd work with USBC models.
Here we used an 'Anker PowerExpander+ 7-in-1 USB-C PD Ethernet Hub' but any good-quality, powered USB hub should work well.
No. When connected successfully, Scarlett will be able to pass audio into any compatible audio app. You can certainly record audio straight into the camera app.
If you're using a USB-C iPad, you may find that you can simply connect directly using that connection. Generally speaking, USB-C iPads are able to provide sufficient power for Scarlett to function.
@@FocusriteHelp Thank you for responding so fast!!! I appreciate the help!
Thanks for the video. I'm setting up a project studio around a 2021 iPad Pro (M1) with Garage Band. Can you confirm that the Focusrite 2i2 3rd Gen will allow you to record vocals/guitar live to garage band while also monitoring the output of Garage Band sequencer tracks and/or live instruments WITHOUT having to use Audiobus 3 > AUM? Thanks!
Hi there! Please reach out to our Support Team to talk through your setup: bit.ly/FocusriteSupport
Question do you have to register and download drivers for it to work on the ipad pro?
No drivers are needed for use with iPad.
@@FocusriteHelp thank you.
Does it work for iPhone camera video recording?
Is it also possible to record with a different app for example Twisted wave?
Absolutely. Once successfully connected, Scarlett will pass audio into any compatible audio app.
Brilliant thank you
Can you please
teach how to record with karaoke for singing using same items?
Our Support Team can certainly help you with that. Please give them a call or use the Live Chat feature to discuss this today - bit.ly/FocusriteSupport
Great video 🙏 Thank you so much. Is there a way if we can plug a usb midi also, like the way we can use it in old Focusrite iTrack Dock? I was using that and now I can’t because I upgraded my iPad mini to iPad Air which is with type C. Is there any similar product iTrack Dock for iPad Air, through which I can use USB midi, Two mic at least? Or is there any solution if I can use my iTrack Dock with my new iPad? I am unable to find any valuable information.
Glad you found this interesting, Muki. In theory, a Scarlett 2i2 setup like this one could be a solution for you. None of our current audio interfaces feature a dedicated USB MIDI input, like the one found on iTrack Dock, but If you purchase a USB-C hub with power delivery like the one shown in this video, you may find that your USB MIDI device is able to establish a connection with the iPad if it is also connected to the USB-C hub.
I should point out that this isn't something we've tested and so isn't officially supported. Also, in terms of current iPad compatibility, only the USB-C iPad Pro is supported for use with Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen.
John // Focusrite UK 🇬🇧
How to sync video with the song...
Hello, can I use it on the go with a hub+powered bank like: Anker PowerCore+ 19000 PD Hybrid Portable Charger and USB-C Hub ?
I have a 18i8 3rd model. When i take it out side to recording live band with my ipad, but it want to connect to computer to use Focusrite control app. This is so stupid. How can i bring all my computer and screen to recording live band? And if i have a computer near me, i don't need control app for anything either.
what adapter/hub would be best to use for usb-c ? the apple one or the anker that you use in the video? i know that not all of them are great to use. I wonder if the hub affects recording because I either can't hear my recording at all or only out of one ear.
please help! thank you!!
The only requirement is you need a USB-C hub that also features "Power Delivery" Meaning it can also be connected to power while passing data to and from the iPad and the Scarlett.This help article explains the process in greater detail.
support.focusrite.com/hc/en-gb/articles/360012532199-How-to-connect-your-USB-C-iPad-with-your-3rd-Generation-Scarlett-Audio-Interface
This is one of the many examples that would work:
www.amazon.com/QGeeM-Delivery-Compatible-Thunderbolt-Chromebook/dp/B07QXMNF1X/ref=sr_1_5?crid=345EPU5A1U6B7&keywords=usb-c+ipad+hub+power&qid=1677713216&sprefix=usb-c+ipad+hub+pow%2Caps%2C69&sr=8-5
I tried connect using usb-c lightning to iphone, didnt work....
please help
You will need additional power iPhone doesn’t have enough power output to power the interface.
I don't see channels either on my iPhone Xr .. I bought this: www.amazon.de/dp/B08ZKKTZPK/ref=pe_3044161_185740101_TE_item Any idea?
I have an iPad Air 4 which has USB C port. I also have Scarlett 2i2 (first generation)...So my questions are
1) Will I be able to connect my 1st gen Scarlett 2i2 to my iPad Air 4?
2) Will I be able to connect midi keyboard as well?
In terms of iOS compatibility, only Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are officially supported, specifically when used with the USB-C iPad Pro. That said, we would expect Scarlett to be able to transmit audio when connected to other models, providing it has adequate power, as Scarlett are USB class compliant devices. Whether or not an additional USB device will be able to draw sufficient power and also establish a connection with your iPad will depend on how you choose to connect and provide power. You may find that a powered hub of some kind works well.
Does the power source need to be a certain wattage? I’ve got a 30W charger and it isn’t working.
hello,
I recently bought the Scarlett 4i4 , and wanted to record directly the Video from my Iphone 11 without going through Garage Band and having to Export and put Video and Sound together. I bought too the Iphone USB-C cable + Lightning to ensure it works, sadly not. By the Focusrite Control App, it always said the connection failed or I should update altough it's already done.
Is the 4i4 for iphone suitable ? or do you please have a Solution.
Thank you !
Hi Safidy, I'm in the same situation! Have you been able to find a solution for this?
@@AliRasoul not yet 😰 still searching for an advice
@@safidyrakotomavo9939 I managed to fix mine today! our Scarlet 4i4 needs more power, and our 1iphone 11 is not enough! So I ordered a Powered USB HUB. with all the cables yu need in this video... This is what I ordered, and it's finally worked ... www.amazon.co.uk/gp/product/B08R5KZD5S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Olá! Tenho uma Scarlett 2i4 e gostaria de saber e ela é compatível para conectar com o iPad.
A outra pergunta é se o IPad 9 pode fazer essa conexão com alguma interface. Grata ✨
Apenas Scarlett Solo e Scarlett 2i2 3rd Gen são suportados com iPad, especificamente iPads USB-C, pois fornecem fonte de alimentação adequada e consistente. Como requer mais energia, a Scarlett 2i4 pode não funcionar como você espera, mas em teoria, se você usar um hub USB alimentado separado, ela pode se conectar com sucesso.
John // Focusrite UK 🇬🇧
Eu usei o google tradutor
@focusritehelp Of i have this connected directly to the iPad and it’s on the magic keyboard which is charging also... will that be enough power? Or should I use the dongle method provided in the video?
if its a c to c cable, how will it go into an ipad considering ipad has its own lightning input? genuinely asking coz i feel dumb now lol
Hey James, this applies to the iPad Pro with the USB C; you can connect Scarletts to a lightning iOS device: support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-
@@FocusriteHelp we need a focusrite control app on iPad. As I’ve said in a reply to another comment about this, I had the 4i4 in my Amazon cart ready to buy but after watching this video I have to buy 2i2 cos I only own an iPad.
Hay alguna forma de hacer funcionar la scarlett 2i2 3ra generación con un ipad mini 4 o un iphone 11 pro? Ambos tienen puerto lightning.
Gracias!
Solo se admite iPad USB-C. Es posible que otros dispositivos no puedan proporcionar suficiente energía, pero hemos escrito un artículo que explica cómo puede conectarse con éxito:
support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-
John // Focusrite UK 🇬🇧
con el traductor de Google
@@FocusriteHelp de acuerdo, voy a probar si funciona porque ocupe un hub lightning y no funcionó. Probaré la opción que describen a ver si funciona.
@@FocusriteHelp sirve cualquier ipad pro, de cualquier generación? O tiene q ser alguna en especifico?
Will it work with ios lumafusion
Is it possible to connect an iPad to a macbook via the interface? I'd like to record some of my iOS synths into garageband session on my macbook.
The only way this would be possible would be to connect the iPad audio output to the Scarlett via a 3.5mm to TRS adapter such as the one linked below:
www.amazon.com/Hosa-HMP-006Y-3-5mm-Stereo-Breakout/dp/B0084O7FPM/ref=asc_df_B0084O7FPM/?tag=hyprod-20&linkCode=df0&hvadid=692875362841&hvpos=&hvnetw=g&hvrand=16507404823270687225&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003488&hvtargid=pla-2281435181738&psc=1&mcid=235736ecf9213e91ad2f7a4cca9db921&hvocijid=16507404823270687225-B0084O7FPM-&hvexpln=73
However, if there is a way to export these sounds from your iPad as audio files, and import them to your GarageBand session, this would offer higher audio quality. Please let us know if this makes sense or if we can answer additional questions.
What is the exact name of the anker powerhub that was used? Or any other useful powerhubs please. I can't tell the differences...
Something like the Anker 555 USB-C Hub should serve you well.
I’m not familiar with the power hub. Can you recommend one for my I pad with lightning connector? Thanks.
Hi, this article explains in detail how to connect a lightning port iOS device to your Scarlett. Please let us know if this helps or if we can answer additional questions:
support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices
Hiya. Hoping you can help, as Thomann can't give me a definitive answer.
I would like to get the Focusrite Scarlett Solo 3rd Gen for my husband. He has an iPad 9th Gen [OS 17.7]. Are they compatible, please? I've no idea what I'm doing, but your video suggests to me that it may be possible.
Scarlett 3rd Gen isn't specifically designed for use with iPad but in theory, it can pass audio successfully and work well if connected using a powered USB hub, as shown here.
Generally speaking, the iPad won't be able to provide sufficient power for Scarlett to function but a hub, like the Anker product shown here should work well.
After connecting everything as you showed in the video my iPhone 12 max w/ iOS 15.5 is still saying the 2i2 requires too much power and is not working. How can I fix this?
Afraid iPhone isn't supported. Scarlett Solo and 2i2 3rd Gen are supported for use with the USB-C iPad Pro only.
Is it possible to use the Scarlett with the iPad/iPhone for listen to Tidal or other streaming service with my monitors? I often switch from my recordings to other music to relax…
Yes absolutely. Scarlett's are class-compliant and can be used as the main audio output device for your iOS device.
@@FocusriteHelp thanks a lot, I love studio monitors for listening (apart from monitoring) but they didn’t work well with my Ifi Zen DAC.
I think it was because of analogue control of volume of the line out by the DAC that complicates the path signal.
I believe that Scarlett or other audio interfaces regulate the volume BEFORE conversion providing a fixed line output signal
What’s all this needing a pc/Mac non-sense ?
The Scarlett devices will work out of the box, but to get the full functionality (such as sample rates above 48kHz, MIDI on selected units) it is necessary to connect the Scarlett 3rd Gens with Focusrite Control on a PC/Mac platform to initialise them. You can then continue to use the unit with iOS without further need for Focusrite Control. As shown in the video, for the 4i4 interfaces and above, functions such as configuration of the channel inputs need to be administered in Focusrite Control on a PC/Mac
@@FocusriteHelp if I buy a 3rd gen Scarlett solo , will I be able to configure it for 192khz compatibility on my windows computer with focusrite control (no DAW) - and then plug it into my iPad 2020 and I’ll have permanent 192khz / 24 bit ability ? Thanks
Do you found the solution for multi input connection? I’d like to record drums with an iPad from a 18i20 (1st gen), but don’t know how to solve the multichannel input issue. Thanks!
Ok so to be clear, I cannot use my 1st gen Scarlett 2i2 with my gen 4 ipad? It doesn’t work so I’m guessing I need to upgrade to a 3rd gen Scarlett? I just wanted to trouble shoot everything before I run out and buy another interface…
That's correct, 1st Gens are not tested or supported on iPad.
Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are tested and supported with any iPad Pro with USB-C port. Here's more info: bit.ly/3yHVSuo
Bri // Focusrite US 🇺🇸
@@FocusriteHelp thank you, I was searching everywhere for an answer!
I attached the i8i8 to my iPad Pro. When using garage band, I can't hear any input or playback. I enabled the monitoring function. Any help is appreciated.
We're sorry to hear you are having trouble. There are several possible causes for that issue, so it would be best for you to contact our support team for further assistance. They can be reached at the link below:
bit.ly/FocusriteSupport
When I record in this manner, I get sound from the mic in channel 1, but nothing from my guitar in channel 2. The lines are showing up, showing it’s picking up sound, but nothing comes out. Help!
Please help! Will this whole setup work with an IPad Pro 12.9inch 3rd Generation 2018? what USB-C HUB do you recommend for my Ipad Version? Thank you so much!🙏🏻🙏🏻🙏🏻
Hi Bryan, happy to help. This article will walk you through what you need: bit.ly/3iUxaAf
can you use the interface with usb c to lighting to record on your iphone?
Yes you can, however, you do need a few adapters. Please refer to this article that explains the full connection process. You will need a USB hub that allows power delivery and a lightning-to-USB adapter.
support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-
Is there any plan to create a Focusrite control type app so we can also record with things like 18i8?
No plans to share at the moment, but this is an interesting idea!
Can these recordings sound as good as ones on Mac m1 or Windows with Adobe Audition?
I'm looking for a simple way to sing and do voiceover
Work.❤
Focusrite interfaces are tested and proven to provide high-quality recordings on Windows, Mac, and iOS devices. This setup should absolutely work, please let us know if we can answer any additional questions.
When you say direct connection with from Scarlett usbc to iPad usbc is that only the pro or will it work on iPad air 4 , thanks
In terms of iPad compatibility, only Scarlett 2i2 3rd Gen and Scarlett Solo 3rd Gen are supported for use with the USB-C iPad Pro only - focusrite.com/en/news/focusrite-sound-now-ipad-pro#:~:text=Now%20you%20really%20can%20record,Focusrite%20sound%20wherever%20you%20go.
Can the iPad Air handle the power draw of the Scarlett AND a condenser mic (XLR)? Or do you need the USB hub thingy? I was thinking of getting a Scarlett but wasn't sure of its power needs.
The bus-powered Scarletts will need a powered USB hub to draw power - it won't be able to draw power solely from your iPad. Here's more info: bit.ly/3a8YqoL Hope this helps!
@@FocusriteHelp I discovered indeed that the Apple - USB Type-C Digital AV Multiport Adapter works just fine. I plugged the power cord into the outlet, and it can sustain the Scarlett and a condenser mic just fine.
Is it safe to use? i mean, isn't there any possibility of mismatch of voltages when using the phantom 48v? for example, if i want to use the microphone xlr, a line in to a piano and the headphones?
It's certainly safe to use. The Phantom Power supply is only delivered to the XLR portion of the Scarlett input.
Hello Can i have thé benefit of thé 4 différents audio streams from iPad apps thought thé 4 output of thé 4i4 ?
Good how can I can connect Yamaha Key Board ?
Which Yamaha keyboard do you have? With your Scarlett connected to a Mac, Windows PC or USB-C iPad via USB, you should find that you can connect the audio output from your Yamaha keyboard to an audio input on your audio interface, using a suitable cable, such as a 1/4" TRS jack cable.
What Apple product would be best for recording drums from 18i20 w/out breaking the bank?
Hi there! Not entirely sure what Apple product you might need here. Most people use the 18i20 to record drums with a DAW on either a laptop like a Macbook Pro or with a Mac Mini (or a Windows machine if they prefer). If you'd like more help with your setup please reach out at bit.ly/FocusriteSupport.
Wow thank You so much you guys are the best i got all my anwsers🥹🙏🏾✨ Thank you
How do I configure focusrite control on iPad?
Unfortunately, there is no way for Focusrite control to configure your interface from an iPad. If you would like to configure your interface for settings like air and INST level, you would need to first connect the device to a computer, configure via desktop, then disconnect and record into an iPad. Please let us know if this helps or if you have additional questions.