Sunday morning and I’m watching someone cut grass. I told the dealer in December to put it together but next day I changed my mind. Decide to stay with my Toro Groundmaster 3310 cab unit I have ordered. It is expected in march. This Mach one does blow out some clippings. $12,000.00 vs $65,000.00. Hope my a/c works good.
That is an insanely good quality cut. I currently have a pro turn zx 52 and it does great as well. Only 189 hours. How many were on this one at the time of filming
How does it do against heavy pasture grasses such as Pensacola Bahia, and tall fescue? A gravely sales person is telling me it will do it, but then again he is a salesman. I want to hear from a pro. I am not a professional landscaper, but I have about 10 acres of rough property. A small tractor and rotary cutter is about 16 grand. If this will work I'd rather have it.
I live in northern alabama, I have 7.5 acres and about 1/2 of it sits low - and isn't dry enough to run a mower over until late May or early June. By then, the grass is crazy tall and thick. I demo'd a 260, and it did fair job, but I had to go slow and double/triple cut a few sections. I'd come across a thread about the Mach1, which is what made me take a good look at it, and ended up buying: www.lawnsite.com/threads/new-gravely-mach-1-w-tunnel-deck.492344/ I bought the Mach1 and it handles the tall, thick, moist stuff much, much better than the 260 did. I also have a ~3 acre section that was covered with sweet gum saplings up until 4 years ago. I've been bush-hogging that for the last several years - and now that it's grassy, I've switched to mowing it with the ZTR. The Mach1 handles it great. Now that fall is approaching, I'm really curious if the Mach 1 will do a decent job mulching up my leaves. My concern is that with a deck designed to blow the clippings out fast and far - it may not do a good job of churning up leaves into itty bitty pieces. I will be installing gator blades and a Bad Boy "advanced chute system" to block off the discharge port. Hopefully that will do it. Also of note: The 31hp Kawi FX921v and 35hp FX1000v are *exactly* the same engine, except the 31hp version has the throttle stop screw set so the throttle can't open up all the way. A few minutes with a dremel to grind down the screw will allow the throttle plate to open all the way - and gives you +4hp. You can look at this two ways: You can add the power if you want/need - or... If the engine meets Kawasaki's durability/reliability specs @ 35hp - then it isn't working as hard at 31hp, and should last longer.
@@GroovesAndLands If you block the discharge opening like you say and use the wavy mulching blades, as they have very little lift, it will chop up the leaves pretty well...maybe not quite as well as some decks but well enough to substantially reduce their size. I have been using a Gravely Pro Ride since 2011 and it has the same deck shell as the Mach One. That's what i have been doing when leaf mulching time comes.
I just watched your video. I had a Gravely ProTurn that would not do what I saw in your video especially with the grass being wet as yours was. But I had Scag with the velocity deck and a John Deere with the 7 iron deck when I lived in South Texas and they cut very well. How does this compare to the Scag or John Deere with the 7 iron deck? Do you know?
Not trying to answer for The Chunky Cajun but.i have a Gravely Pro Ride and have used it side by side with both the John Deere 930 series and a Scag Wildcat a few years ago and it will handle tall, thick grass every bit as well and IME it handled it slightly better. I can’t say whether it will handle wet grass better, as far as dispersion goes because I didn’t get to use the JD and Scag in very wet grass.
@@thechunkycajun My Kubota will , so will a Exmark and Scag. I ain't no spring chicken either. I've seen the majority of what's out there , I'm in central FL we cut year round and put mowers through hell. Not saying the Mach One isn't nice , but there are others that will hang right there with it.
@@thechunkycajun My Kubota z726 with a FX801 will hang with mower , trust me. My buddy owns Gravely's, he has nothing but problems , I would never buy one...hell you can't even find a good review on their own website. Believe what you want.
I hate the way my gravely Mach One throws grass and dust out the front of the mower and coats me with a half inch layer in ten minutes. Other than that it can really cut the grass. Also the height adjustment is ridiculously useless.
@@Texas1987 No adjustable baffle. They use a different method of adjusting the deck angle I think. My dealer has no clue but there are four corner adjustments that might work. It may void my warranty if I do it myself. I just wear a face shield for grinding metal and tightly sealed goggles to keep dirt and grass off my eyeballs. Also a N95 mask so I don't cough up blood the next morning. Other than that and the ridiculous cutting height adjustment system it can really cut the grass. It is not user friendly.
SCAG velocity deck best cutting deck ever. That deck is crap. Leaves clumbs and clippings. Scag cuts better than any other deck. It cast iron spindles and is almost 1/2 thick.
I demo’ed a Scag a few years ago and run it.side by side with my Gravely Pro Ride, which has the same deck as the Mach One, and it didn’t cut any of the grass any better, if as good as my Pro Ride. Neither left any clumps on weekly or bi-weeklyyards. Both left visible clippings on the bi-weekly yards, and so did the JD, Hustler and Exmark mowers that I demo’ed at various time on the same yards. I mow the southern grass types, don’t know what grass type you cut? Btw, which model Gravely were you referring to that left clumps?
@@razorblades7688 the pro ride is not the same deck as the Mach one. The Scag Velocity doesn’t compare. We tested it. The Mach one deck on another level.
@@ronniestellyii4224 I will clarify…the deck shell is the same deck shell as the pro ride. It has different spindles and bracing etc but make no mistake it is the same deck shell. This deck was originally built by EverRide under their Warrior model, introduced in the early 2000’s. EverRide’s parent company Auburn Consolidated inc., got in financial trouble and Aries Company bought them out and after a couple of years brought out the Gravely Pro Ride, which was basically an EverRide Warrior painted red with Gravely decals and all. The only real difference in performance between the ProRide and Mach one is the more powerful engine on the Mach One. I demoed a Mach one for a week or so earlier this year so I have experience with it and took pics of both mowers side by side that show differences and similarities between the two mowers.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
Hey man, I’m in Livingston Parish. I just bought a new 2023 Gravely ZT HD 60. Purchased 03-22-2024.
What's up Livingston! Cheers from vermilion!
That mower is a beast.
You doing a great job running that mowers. Props on not leaving any torn turf
Sunday morning and I’m watching someone cut grass. I told the dealer in December to put it together but next day I changed my mind. Decide to stay with my Toro Groundmaster 3310 cab unit I have ordered. It is expected in march. This Mach one does blow out some clippings. $12,000.00 vs $65,000.00. Hope my a/c works good.
We got a gravely zt HD 60. Really amazing mower.
Awesome!
Wow! That mower is a beast!!
I didn't even finish the video im at 12 min. great video bro , You know what we wanna see . Best zero turn review ever man.
Have a 2019 pro Z 52" would love to have that deck to put on when I have to mow large fields. Heard it was the sh&%.🥳
That appears to be a very clean cut for such tall grass and at a high-speed mow. Is this deck standard on the Mach 1?
Yes it is.
Hope your doing ok out there with this tornado
Thank you so much! It didn’t hit us. It hit East of us. Keep your prayers with those effected please
Nice
The sounds from the other side of the house sounded like a helicopter was flying low and near by lol.
I cut acres and residential is this mower good for residential yard?
That is an insanely good quality cut. I currently have a pro turn zx 52 and it does great as well. Only 189 hours. How many were on this one at the time of filming
It had maybe 120 hours honestly. It was a couple months old during the busy season in a super busy company. It’s still running though years later!
@@thechunkycajun how many on it currently
Great Review!
How does it do against heavy pasture grasses such as Pensacola Bahia, and tall fescue? A gravely sales person is telling me it will do it, but then again he is a salesman. I want to hear from a pro. I am not a professional landscaper, but I have about 10 acres of rough property. A small tractor and rotary cutter is about 16 grand. If this will work I'd rather have it.
I’m telling you this machine will do it. It’s crazy the way it cuts grass!
@@thechunkycajun Thanks for getting back to me. I appreciate your time and information. Very helpful in making this decision.
Clyde Murphy any time brother!
I live in northern alabama, I have 7.5 acres and about 1/2 of it sits low - and isn't dry enough to run a mower over until late May or early June. By then, the grass is crazy tall and thick. I demo'd a 260, and it did fair job, but I had to go slow and double/triple cut a few sections. I'd come across a thread about the Mach1, which is what made me take a good look at it, and ended up buying: www.lawnsite.com/threads/new-gravely-mach-1-w-tunnel-deck.492344/ I bought the Mach1 and it handles the tall, thick, moist stuff much, much better than the 260 did.
I also have a ~3 acre section that was covered with sweet gum saplings up until 4 years ago. I've been bush-hogging that for the last several years - and now that it's grassy, I've switched to mowing it with the ZTR. The Mach1 handles it great.
Now that fall is approaching, I'm really curious if the Mach 1 will do a decent job mulching up my leaves. My concern is that with a deck designed to blow the clippings out fast and far - it may not do a good job of churning up leaves into itty bitty pieces. I will be installing gator blades and a Bad Boy "advanced chute system" to block off the discharge port. Hopefully that will do it.
Also of note: The 31hp Kawi FX921v and 35hp FX1000v are *exactly* the same engine, except the 31hp version has the throttle stop screw set so the throttle can't open up all the way. A few minutes with a dremel to grind down the screw will allow the throttle plate to open all the way - and gives you +4hp. You can look at this two ways: You can add the power if you want/need - or... If the engine meets Kawasaki's durability/reliability specs @ 35hp - then it isn't working as hard at 31hp, and should last longer.
@@GroovesAndLands If you block the discharge opening like you say and use the wavy mulching blades, as they have very little lift, it will chop up the leaves pretty well...maybe not quite as well as some decks but well enough to substantially reduce their size.
I have been using a Gravely Pro Ride since 2011 and it has the same deck shell as the Mach One. That's what i have been doing when leaf mulching time comes.
Dats a bad boy ..,, slinging grass clippings 20 yards.
I just watched your video. I had a Gravely ProTurn that would not do what I saw in your video especially with the grass being wet as yours was. But I had Scag with the velocity deck and a John Deere with the 7 iron deck when I lived in South Texas and they cut very well. How does this compare to the Scag or John Deere with the 7 iron deck? Do you know?
Not trying to answer for The Chunky Cajun but.i have a Gravely Pro Ride and have used it side by side with both the John Deere 930 series and a Scag Wildcat a few years ago and it will handle tall, thick grass every bit as well and IME it handled it slightly better. I can’t say whether it will handle wet grass better, as far as dispersion goes because I didn’t get to use the JD and Scag in very wet grass.
We actually ran a scag next to this unit. The biggest scag they make with a Briggs 40 horse EFI. This out cut it by far.
Only if they wouldn’t throw the deck belt
Most any good zero turn will cut like that at 3.75.
30 plus years in the industry.
Nothing cuts like this.
@@thechunkycajun My Kubota will , so will a Exmark and Scag. I ain't no spring chicken either. I've seen the majority of what's out there , I'm in central FL we cut year round and put mowers through hell.
Not saying the Mach One isn't nice , but there are others that will hang right there with it.
@@John_D2 no it won’t.
We actually tested all those against it.
Even the 40hp efi briggs couldn’t keep up.
Sorry buddy.
@@John_D2 like it wasn’t even close. The 30hp Kawasaki Kubota was a very nice mower. But the Mach one smoked it.
Easily
@@thechunkycajun My Kubota z726 with a FX801 will hang with mower , trust me. My buddy owns Gravely's, he has nothing but problems , I would never buy one...hell you can't even find a good review on their own website. Believe what you want.
I absolutely hate the way the tweels look on any mower.
I hate the way my gravely Mach One throws grass and dust out the front of the mower and coats me with a half inch layer in ten minutes. Other than that it can really cut the grass. Also the height adjustment is ridiculously useless.
How much does that mower cost? Does it cut regular grass good?
The price is around 12k for a new one. It does really well on regular grass. It isn’t a normal 260 but a little bit better than a super Z
For 2023 this mowers msrp is 15 grand
Gravely has scag beat on twills. But I just pump my tires full of slime
Hacker must be down south
I mow for a living myself and that is not how you mow.
Lol
He said in this video that he is ust the mower repair shop mechanic. Duh huh
Too bad it blows grass out the front and coats you with it.
Does it have a adjustable baffle? My scag does it reduces the blow out front if you adjust it down some
@@Texas1987 No adjustable baffle. They use a different method of adjusting the deck angle I think. My dealer has no clue but there are four corner adjustments that might work. It may void my warranty if I do it myself. I just wear a face shield for grinding metal and tightly sealed goggles to keep dirt and grass off my eyeballs. Also a N95 mask so I don't cough up blood the next morning. Other than that and the ridiculous cutting height adjustment system it can really cut the grass. It is not user friendly.
The deck is set at 37.5. WTF ???
3.75
SCAG velocity deck best cutting deck ever. That deck is crap. Leaves clumbs and clippings. Scag cuts better than any other deck. It cast iron spindles and is almost 1/2 thick.
I demo’ed a Scag a few years ago and run it.side by side with my Gravely Pro Ride, which has the same deck as the Mach One, and it didn’t cut any of the grass any better, if as good as my Pro Ride. Neither left any clumps on weekly or bi-weeklyyards. Both left visible clippings on the bi-weekly yards, and so did the JD, Hustler and Exmark mowers that I demo’ed at various time on the same yards.
I mow the southern grass types, don’t know what grass type you cut?
Btw, which model Gravely were you referring to that left clumps?
@@razorblades7688 the pro ride is not the same deck as the Mach one. The Scag Velocity doesn’t compare. We tested it. The Mach one deck on another level.
@@ronniestellyii4224 I will clarify…the deck shell is the same deck shell as the pro ride. It has different spindles and bracing etc but make no mistake it is the same deck shell. This deck was originally built by EverRide under their Warrior model, introduced in the early 2000’s.
EverRide’s parent company Auburn Consolidated inc., got in financial trouble and Aries Company bought them out and after a couple of years brought out the Gravely Pro Ride, which was basically an EverRide Warrior painted red with Gravely decals and all.
The only real difference in performance between the ProRide and Mach one is the more powerful engine on the Mach One.
I demoed a Mach one for a week or so earlier this year so I have experience with it and took pics of both mowers side by side that show differences and similarities between the two mowers.
I own this exact mower and I love it. Just to let you know it is not designed to accommodate a bagging system.