2015 Honda Accord Heavy Swirl Removal with Griots G9 polisher!!
HTML-код
- Опубликовано: 6 сен 2024
- In this video I'll be bringing you all along as I put the Griots all new G9 Dual Action polisher to the test! This 2016 Honda accord has some mean swirlmark's and were going to tackle them. Hope you will enjoy this video!!! Thank you!!
I’m like you! I have full time job at a bodyshop! But I’ve been detailing on the side! Mostly family and Friends cars! I really enjoy watching you videos! It inspires me to want to take it to the next level. I also have the griot’s G9 and just recently purchased the 3inch polisher! I love the simplicity of your videos and how layed back you seem to be. Great job 👏 buddy! Keep the videos coming
Hey Danny thank you!! I really appreciate that man! I honestly just enjoy making videos out there to share and reach out to anyone who wants to learn or is just like me. 👍 have built such great friendships throughout this RUclips thing an couldn't be more greatful!! 🤜🤛
Here's the video!
ruclips.net/video/RLVBlGiT4RA/видео.html
Love the part where your buddy showed up with a six pack, mirror shine, some job! I enjoy your video. Thanks
Hahaha I loved it too when he showed up! Beer is essential when detailing 🤣 appreciate you tuning in and watching my friend.🤝✊
Very nice! I’m about to buy the Griots G9 polisher and the Boss creams. Thanks for the tutorial.
Thanks, Johnathan 👍 you will be very happy man! The fast correcting cream is still my favorite compound I use to this day! 👌 appreciate you watching!✊
I use a lot of the same products as you. I used to use the Meg's Ultimate All Wheel cleaner as an iron remover for the whole car - but since it is a thick gel I found that it doesn't work that well for large panels - I would have to use a lot of it and then spread it out with a damp microfiber to get even coverage so it ended up not being as cost effective as it seemed. It is still the cheapest iron remover I have found as far as volume at $9.98 for 32 oz and I still use it for wheels because it works great! I have switched to Meg's Wheel and Paint Iron Decon. I get it through detailed image and it is $79.99/Gallon but if you purchase a lot from them then with wholesale discounts you can get it for about $60/Gallon and it works really well and it is watery so it will give a nice even coverage and you can use about half as much as with the Ultimate All Wheel cleaner. I don't use tape like most detailers for showing the 50/50's - what I do is make a "line" while polishing and then put tape over the line to show the 50/50 because that way you won't have to worry about the adhesive and you won't polish a hard line on the paint that can take a lot of work to remove - and will make the clear coat unevenly polished because you will have to polish twice along the line to blend it back in. I hope someone gets some value from the book I just wrote. Thank you for the solid polisher review! Cheers!
BpsDetail, thanks for the information!!! That's a good idea about the tape line. I hate doing them and this was my first time. Just know that people like the 50/50. I'm going to give your method a try. Haha the novel is appreciated, I'm here to learn just as much as I am here to help. 👍👍 I'll look into that decon/iron remover you suggested. If I did this daily would make more sense for sure. Thanks again for the tips!!
Gigi's interior's on point. Young girls respect your elders and your car.
Thank you! Definitely agree 👍
"I want more" LMAO....Indeed, i have had a detail for friends and family every weekend this summer....It is exhausting work but so satisfying to do. I look forward to getting away from my job to detail. Great video and glad i subscribed....Thanks to Fab detailing for sending me here...Cheers!
Hahaha thank you! I do the same, find myself looking forward to getting away from work to detail. Appreciate the Sub! 🤙👍
I like your style man. Simple and down to the point. And I can see you try to keep it cheap. But I do recommend you check out Menzerna polishes. Their products are on the more expensive side, but you use way way less product and it really does go along way. About 7 pea size dabs will do an entire hood! Or 4 dabs per door!
Thanks, Dave! Appreciate that! I have heard nothing but great things of Menzerna my friend! And one day will love to try them out. Along with some Of the Sonax as well👍👍 and well if the product does more for ya, then spending extra is definitely worth it!!
For higher end products 3D,Sonax and Angel Wax are excellent.
@@billl8530 I see Brian with Apex use angle wax often. One day I'll have to try a few higher end products... maybe if they send me em to try! I just cant see spending the money unless I'm detailing very often. Often enough to support my product addiction 😄😄😄😄
Used the meguiars last time, but now I have 2 bottles of the eagle one for the same price. Thanks for the tip!
Awesome! Haha no problem Tom!!👍👍
Nice vid Smurf I enjoyed watching you work while eating my dinner. Honda looks 100% better you did a fine job brother. Oh and I liked the black shirt I have one just like it. HOOF OUT.
Thank you HOOF!!! I appreciate that!!! She was VERY happy! Smurf out!!🤘
A play *_in full_* and like #38 from Bits of Real Panther!
Just stopping in to help with your watch time, PapaSmurf919. May your new week be the best one ever!
Thank you!!!
You're very welcome -- we're all in this goofy RUclips dance together!
Anyway, have yourself a great day, friend!
Papa great job👍👍 Now that you detailed the car... is the color now officially Smurf Blue Metallic😉 Loved the little sound effects🔊
Hahahaha thank you!!! Yeah, Smurf blue sounds good!! Yes, figured the sound effects would add a little smurf flavor 😂 appreciate it man!
@@PapaSmurf918Detail Smurf effects😁
Good job, I definetly can relate with your opening narrative, I enjoy it very much and like to see the surprise on friends cars when I do a sampling on that cars, just subscribed, keep up the good work
Abel, thank you! Appreciate that! So much satisfaction no matter how hard or how much work. That end result and the expressions are worth it!👍
Finally getting around to my car! I wish I could get the dent out of my fender (hit and run) while parked. But I have the ‘13 Accord EX in their Maroon (wish it was the blue). I’ll be using my Griot’s G9 and G8 that I bought after a ton of research and reviews (a ton of help from you personally). I have an unopened gallon of purple power (never knew I could use it for a strip wash) so I’m glad I watched this! Your shelve looks like mine lol. The only thing I need is a good (yet affordable) paint light, and a fan because it’s still 105° (or more in the garage). I’ve always used my polishers on the job, but haven’t used it in my car yet! I have the BOSS line as well, but was wondering if I should use that, or their Comound and polish (yellow bottles). Even though I have Sonax, Megs, about 10 other brands of compounds/polishers, I wanted to stick with all Griot’s on my car, especially since I have a couple bottles open from a paint correction job.
All great tips and even learned a different strip product! I know this video is 2 years old, but if you have any other advice, I’d like to hear! I also have Papacut in my FAB cart online! I wanted to buy it with a ceramic product, saving shipping cost, so I haven’t bought it yet (waiting until I can afford to spend anything..like even food these days). After losing my dad to Covid, 11 months ago to the day, I took a break from detailing, and well.. it’s just been hard times.
But while I still have a garage (before this house sells) I figured I should get back into everything, and finally getting to my swirled paint! Hopefully I can pull out that fender dent soon as well!
My long way of saying, Thank you for all that you do! All of your hard work, advice and sharing your knowledge in these videos, as I’ll be watching more especially now after taking a break this year! (couldn’t believe I was only subscribed on my business account, now I’m subbed on this one as well)! 🙂
Hey Tiffany! 👋 first of all, sorry about your Dad. My condolences... I'm just getting over covid myself and it was rough. Regarding the boss creams I'd absolutely stick with the boss creams vs the yellow compound/polish. They have much better cycle time and just better products 👍 papacut is phenomenal. I developed it to cut and finish extremely well will mostly all pads. I'm glad your finding your detail spark again! That's awesome. If you ever have ANY questions feel free to ask! If you have Instagram find me at Papasmurf918Detail 👍👍 sometimes it's easier to ask anything there.
Awesome video! Just got my G9 this week, have been trying to decide what correcting creams/polishes to use. Think the boss creams are the way to go. Appreciate the channel!
Thanks man! Appreciate you watching! The G9 did a great job here. I would highly recommend the Boss creams. My absolute favorite is the Fast correcting cream. 👍 it's my go too. Its ability to cut and finish with 0 dusting is phenomenal. On harder clear I'm able to basically 1 step the paint! Softer I finish it out with the perfecting cream for a killer 1-2 combo
The more i watch your videos, the more i learn, appreciate all the info man. Keep up the awesome work 👍
Jesse, thanks man really I appreciate you taking the time to go back to these older vids. 🤜🤛🤝🤙
@@PapaSmurf918Detail no problem brother!
I'm glad that your able to learn as well.. that is what I want to do with all my vids is spread knowledge.. especially as I learn as well. 👍
@@PapaSmurf918Detail you're doing it right man, my biggest problem right now is finding what pads/compunds/polishes to use and which vehicles can be done with a 1 step, but your videos have helped out alot, i only have 2 trucks and 1 SUV under my belt and im booked for a whole week already 🙏 all just from posting pictures on facebook lol
@@jessemoran000 that's great!!! People are seeing the result.. not many care about how you get it there they just want that result 👍👍 in time, the more you do the more you will be able to pick a pad polish combo.. I still have trouble myself.. I'll just do test sections until I find what's giving me not only the defect removal I want and/or getting paid for as well.
Nice job!!!
Thank you!!! Appreciate you taking the time to watch!👍🤜🤛
Awesome results and thank you for sharing your knowledge. I'm still learning and trying out different products and methods. Appreciate 100% ;-)
Luis, thank you!!! Not a problem I want to help and encourage those starting out like me that great results are not hard to get!!👍🏻👍🏻 appreciate you watching my friend! If you have any questions feel free to ask! If I can help, I will!!!
You did it all wrong because when you wear that shirt you just snap your finger and the car is perfect! 😂 All joking aside you did a fantastic job on that car and the color is beautiful. Sounds effects “boop” and all! Great job brother!
Hahahaha man, what you didn't see is me jumping and snapping before I started the video!😄😄😄 I think I need another shirt. LOL jk. Thanks brother I really appreciate that!! We were very happy with the turnout!!! Take it easy brother!!!!
BTW...try the last cut compound, its a great one step, starts out with great cut and finishes down perfect with a orange cut foam pad or blue med cut foam pad with no or very little dusting...Found the video on the Rag company channel and it works great......:)
Awesome! I have been hearing about this product. Will definitely look into it. Thank you!
Great job man, I've learned a lot watching your vids. Thanks for taking the time to make an educational video to teach others who do this as a hobby or for fun, especially on soft clear coat painted car. Do you recommend using a finishing polish behind the griots correction cream or 3d one AIO?
Thank you! Not a problem here, I love creating content and sharing my experiences in hopes people can learn a few thing! You can absolutely follow up with a finish polish.. in this case something like the Griots perfection cream. Or finishing sealant would work too! Also, 3d one is not an AIO due to no protection inside it. 3d Speed is there AIO polish/sealant 👍👍👍 really appreciate you taking the time to watch!
My brother has a 2014 accord with the same blue color and the paint is too soft. I scratched it with my fingernail. Heavily swirled just ordered the g9 can't wait to fix up his paint
Oh man! Yeah, it's definitely on the soft side. That G9 and a medium polish pad will do perfect. Also, look into Xtreme Solutions Finale.. it's awesome on soft paint.!! Use my discount code PAPASMURF10 for 10% off as well. 👍👍 appreciate you watching my friend!
What a difference 👏 looks awesome
Thank you! She definitely loved it! Thanks for tuning in😉
I think it was another video I commented on the other day, but My g9 comes tomorrow 🙂 I have the same car, but in a dark maroon. Wish it was the blue though! Looking at prep stuff or if I should just use my chemical guys citrus, hoping I can use Sonax beast on the paint for a iron remover, if not I do have that wheel cleaner you showed, and also bought the Boss fast cream and pads, which came yesterday 🙂
Thank you for your videos!
-Tiffany
Tiffany, hey!!! So, the chemical guys strip wash is decent... the protection has to be on its last leg for it to really work. I absolutely am LOVING the poorboys world stripdown as my strip wash. It works phenomenal. Then run your iron remover.. then rinse and then clay👍👍 ohhh I love the FCC from Griots. Paired with the orange pad will be a great combination on the Honda! Please feel free to reach out via Instagram DM at Papasmurf918detail or shoot Mr an email at Papasmurf918Detail@gmail.com if you even have any questions!!! Appreciate you watching!
The G9 layout is much like the FLEX Da polisher.
It is. It's very comfortable.. I love the Rubber front grip on the G9!!!!!
Psmurf... love the vid. Im just a weekend warrior like yourself and i enjoy the way you shoot the vid. Its not perfectly refined and thats a good thing.. some of the other channels make everything look so easy with no problems...ive never tried the griots system.. ive used the meguiars products for light compounding and polishing..also.... did you seal or wax the car afterwards?
Thank you, Barry! The Meguiar's Ultimate Compound is what I started with myself👍 you are right, there are tons of channels out there that's why I want to reach out to the weekend warriors and car enthusiast like us. I absolutely LOVE the Griots BOSS creams. It's a very user friendly system. You know, I realized that I didn't mention that in the video. I did seal the car with the Griots Liquid Poly Wax. It's one of my favorite Sealants so far that I have used. I appreciate your comments man!
Well that didn't take long at all.
First full day at my shop with the G9. .
Working on a new Buick so decided to break out the new G9 that I got this past Saturday.
While polishing the car I noticed a member of my staff reach down for something on the side of me.
Unfortunately it was the button for the lock in switch that fell off the new G9.
I tried to turn it off by letting the button go but wouldn't so I unplugged it.
Will have a new one delivered to me in the morning.
Anyone else had their button fall off?
Aw man.. sorry to hear about the button issue. That's weird that that happened though. Glad you have a new unit on the way. Thanks for the update Kevin👍👍
Enjoyed your enthusiasm.
Hey thanks, Michael! Really appreciate you taking the time to watch. 🤙✊️
Awesome vid man!! That blue is amazing.. well done 👍🏼👍🏼👌🏼
Mn thanks buddy!!! Its a really nice blue! Take it easy!
That's awesome!! Looks beautiful!
Sorry for the late reply! My app doesn't show comments and I go into my studio and there they are. Thank you!!🙂🙂
I'll admit I'm scared. I bought a ton of stuff a couple of months ago but have yet to pull the trigger on the polisher because as I said I'm scared. They also make the pads so damn confusing. I really need to get some protection on my 2015 truck as summer is coming and my house must be right on top of the center of hell. So much sun on my house. I am getting closer and I do like this G9 from everything I have watched. Nice job on the car.
Thanks man! Hey, I was scared too!!! I can assure you that you will absolutely love it. Pads can definitely be confusing just remember how safe foam is. I know people are scared to burn through paint but foam is very safe. 👍 just keep the polisher moving and you'll be just fine. The G9 is a great machine for a first buy. Let me know if you need any tips or advice I'll be glad to help! Thanks for tuning in!!🤜🤛
Rupes make it really simple. Blue compound blue pad. Yellow compound yellow pad. Plus their products are great. Hope this helps.
Very simple with Rupes you are correct 🤙🤙
I basically never comment on youtube videos but felt like I had to here. This was a great informative video. I especially loved how relatable it is and not intimidating like many others. I am about to purchase a G9 myself as my first buffer. How do you like the Griots polish/compounds vs other products? Also my car is a Navy Blue almost exactly like this so I can’t wait to see my results. Thanks for the video! 🍻
First off thank you for commenting! I appreciate your words my friend! My G9 Actually stopped working this past weekend on a truck I'm doing a paint correction on. ( video will be out hopefully next weekend ) I contacted GriotsGarage and spoke with them and they no questions asked sent me q label for return and will be shipping me a new unit. This is by no means meaning the machine is not good. One of the brushes appeared to have gotten chewed up by my guess is a maybe something that didn't get cleaned out of case before assembly. I will be doing a video tonight to inform my subscribers of the issue better👍 with that said still a great beginner polisher and I have NO doubts you will achieve some Fantastic results! Its very light, and comfortable. The Griots BOSS Creams are absolutely fantastic products. I have used all 4. The Complete Compound and polish are also great starter compounds/polishes. I've yet to really use any other compounds or polishes as I haven't found the need. They work for what I need and well I'm sure when time comes I'll try others. Which I'll definitely shoot some vids to share with you all 👍 let me know you have any other questions I'll be glad to help where I can!
PapaSmurf918 Awesome. I appreciate the reply! Probably going to start with the Griots products since I have a small hookup. Already sunscribed and looking forward to the future videos. Do you have an Instagram as well?
@@cashxrs no problem. Yup I sure do. Same as my RUclips name😄 👍👍 appreciate the Sub! And sometimes I'll give heads up on details on my ig before I get videos out and what not. I've gotta do the other half of the GMC I'm working on this sunday. I'm waiting until it's done to upload a full video 👍
Great job! I'm sure she loved it
Thank you!! She definitely loved the outcome! 👍👍
Nice video brother g9 for the win.
Thanks Carlos! Definitely FTW!!!
We can still see those spider webs swirl marks, maybe you need to try a different pad or polish liquid
Oh is that so.?? Yes, I can see them too. Cause we are not going for perfection which really doesn't exist so, if your focusing on that little that's left more Than the 85% we removed, then your really missing the concept. Lol appreciate you watching though!
Great job PapaSmurf. I think the Griot's Garage G9 will be my next polisher.
Thank, Ed! Appreciate that. The G9 is a great polisher. However I did have a problem with mine and had to send it back. They are sending me a new unit but seems to be a problem for the G9. Hoping it's not an ongoing issue. Check out my G9 failed video for more info👍👍 take care my friend!
Great job and great video dude ! Love your work. Can you tell me how do you polish the plastic parts like the front and rear bumpers? The correcting creme and the orange pad is same tu use on bumpers ? Thanks !
Idea: Why not fixing a second camera to a wall of your garage ? We could have a high view of your work.
Thanks man!! You know that's a fantastic idea about the camera. I have another gopro. I'll definitely take that into consideration and maybe use my head mount for some POV action. 👍
As far as your question, I polish them exactly like I do the hood or roof. 👍 same products as well. They are plastic so just be mindful that they take and dissipate heat different. As long as you keep the polisher moving and keep moderate/light pressure you will have no problems 👍👍
Yes absolutely, but don't forget that it can get dizzying to watch in pov mode. 👍 Take care !
👍👍👍
Hey man love your videos 2nd time watching but I took my Hf and been made it into a 3 inch and got to use my g9 twice already and absolutely love it compared to the hf. What do you use as a paint cleaner I dont believe I caught that and where do you order your stuff from? Where you from
That's awesome man thank you! The G9 is a great machine. By paint cleaner you mean like prep wipe?? I just started using Klean Strip Prep All as my pre wax/sealant cleaner. Also just to remove any polish or compound oils after I remove them. 👍 its fantastic. Got it from Autogeek I believe. Also order most of my stuff from Amazon lol. Griotsgarage.com...Shineysdetail.com has some of the best microfiber towels as well as great detailing products. Detailedimage.com is another good one. Ethoscarcare.com has great product's... I use a lot of different brands of detailing stuff👍 out here in Ca.
Balling on a budget!
Hahaha budget balling is my thing!🤣🤙
So that correcting cream from Griot's is pretty good. I'll have to try it
Samuel.. it's a great product for sure. Finishes out awesome.. let me know how you like it if you end up grabbing some🤙
Wow bro wow! Where do you get these products. Def getting the g9 buffer. Nice 👍
Scott thanks man! I got them from Griots directly! Fantastic stuff especially if your diving into polishing for the first time!👍👍
you probably don't carry ( Adam's ) ( Maxshine ) and ( Chemicalsguy ) polisher , can you give me your general review on these three company, the pros and cons and also why did you choose griot's over these three company ?
I actually have 3 maxshine units and I enjoy them.. they had some quality control issues which ment you got a hit or miss unit. Mine however are still going strong. My biggest con, is they vent hot air into your palm when holding a side grip. Other than that they are ok for me. The G9 had its issues as well, with the power cord. More when they were in the first year of release. Griots customer service is second to none and they took care of me. I still have my unit and actually still use both my Griots unit as well as my maxshine units. 👍 Adam's an CG I can not speak for on there polishers. Unfortunately... any other input you'd like to know feel free to ask🤜🤛
I have the same color 2017 honda accord. Yes that boss system is awesome stuff. What will u put for your final step.
James, on this particular car I didn't finish out really but the left side doors needed perfecting cream.
Loved the video that blue pop out I will have to try it on my wife's 2017 Nissan pathfinder but I have the griots complete compound but after that should I used the griots 3 in 1 liquid wax after complete or wait till I get the boss line from griots your the boss lol between you/ fab got me hook on griots line- up papa Smurf looks good
Thank you!! Haha griots makes fantastic stuff for sure! Umm.. after complete compound if your happy with the result you could absolutely apply 3 In 1 wax but the 3 in one could be used on a DA polisher for minor imperfection removal as well as protection.. so it's like an all-in-one. If your going to use complete compound I'd use something like the Griots Poly wax... or Best of Show wax👍 shoot you could even choose the Ceramic 3-1 spray wax!!! Hear fantastic things of it!
I was thinking of getting the poly wax also I've been using meguiars for a long time but the 3 steps took me long time of finshing buffing my customers vehicles but ill be using some of meguiars products I've been using mothers clay / mothers mag/ aluminium chrome polish I even used the meguiars tire gel I just want stuff gets better resulted in fast time the griots interior products cleaner/ detailed I think works better than meguiars interior shine less greasy so I'm glad I'm using griots interior products thinks to fab I've been thinking I needed a changed in my line ups some of my customers I think don't want that greasy film it collects dust/ dirt quickly then the sun comes out and hits the dash it blinds yea I know it did in my vehicle little by little it will be lets of meguiars and more griots but there's more stuff out there just like motor oil to much to list lol
The Poly Wax is fantastic!! Great shine and great durability!! Oh I totally hear you on the Griots interior cleaner/detailer.. it leaves a perfect matte finish.m no residue or shine at ALL it was my go to detailer until Ethos Interior Detailer came along! They are tied in my #1 spot now haha
You are a Professional...
Hahaha thank you however I'm nowhere near man! 😄
Does the orange griots pad with the boss correcting cream leave any swirl marks? Would the black finish pad leave any, say with the griots black pad or orange? Should i invest in the red pad for the final coat? Im new to all this. Im about to pull the plug so i can properly wax my 2 vehicles. Swirl marks from washing is the worst I'd like to fix, but no real scratches. you really can't see them unless you get real up close. Thanks for the great video
Hey, Brandon. First of all thank you for commenting👍and thank you, I appreciate it! To answer your question, no. The orange pad will not leave swirl Mark's ( unless you for some reason put a dry pad on the paint ) which you should never do. Same goes for the black pad. Remeber that before you wax it if the paint feels rough make sure you Decontaminate it with clay bar and proper lube before attempting to polish👍 BOSS creams are very safe. If you are new I'd go with the orange foam pad and some correcting cream👍 it finishes out very well. Shoot even the Griots Garage Complete compound and Complete polish are great as well. The black pad I use if I'm applying for instance the Finishing Sealant from griots. It's a nice 1-2 combo. I did an oxidation removal video using that exact combo. You can check that out if you'd like. The red wax pad is nice. Very soft. Softest of them all. Its definitely faster but some cases I reach for my foam applicator and just apply by hand. Just depends the vehicle. Griots BOSS creams starting from least aggesive to most.
1. Finishing Sealant
2. Perfecting cream
3. Correcting Cream
4. Fast correcting cream ( most aggressive) severe defects.
Then you have pad choice. From least aggressive to most
1. Red foam pad ( wax )
2. Black finishing pad ( finishing polish/sealant )
3. orange pad ( correcting pad )
Then you move into the BOSS pads that are thinner which translates to more power from machine to paint.
BOSS Pads least aggressive to most
1. Black Finish pad
2. Yellow perfecting pad
3. Orange correcting pad
4. White fast correcting pad
Sorry for the long post but as I was starting I knew I had many questions. Please let me know if you need anything else. I'll be glad to help 👍👍
@@PapaSmurf918Detail thanks so much for taking time to answer my questions in detail. Very informative and helpful. You've gained another subscriber! Keep up the great work
@@brandonalbright125 No problem!!! Anytime! 👍🤙
Great job 👏
Thank you! I appreciate you taking the time to watch!!!🤙✊️
Great videos, Papa. Really enjoy your stuff. Just purchased the G9 myself and I give a lot of credit to watching your vids in helping decide on the Griots. Question though I used sealant on my car last year do I need to strip wash and use iron remover or can I just use the iron remover or strip wash before claying? Thanx again
Thank you, Shinya!!! If it was last year chances are it's not very strong! I usually get a good indication by the hydrophobics when I rinse the vehicle.. just see how the water behavior is and if it appears there is still protection you can use a strip wash for sure.. I absolutely LOVE poorboys world stripdown for my strip wash to remove any old wax/Sealants 👍🏻👍🏻 then do your iron remover.. then clay✊🏼
@@PapaSmurf918Detail kool thanx. So do you always have to use both strip wash and iron remover before clay?
Not necessarily no. The iron remover helps break down and dissolve the contaminants in the paint so that when you move to your clay process they come out much easier. On a heavily contaminated paint you will be there for an long time trying to remove them.. 👍🏻 also, picture the clean coat with a jagged piece of metal stuck in it. If you just clay it it will be ripping that bug particle out leaving behind a jagged hole. If you dissolve it in size with iron remover than it will come out of the clear Easier and not leave such a crater behind
@@PapaSmurf918Detail Kool thanx I got it. So Ill be purchasing an Iron Remover ASAP.
AND THANX FOR GETTING BACK TO ME SO FAST. I hate how some of these RUclipsrs feel they too Big Time to respond back to us subscribers
Looks like there's a balance issue with the G9. Lots of wobble with the pad. Especially noticeable while working the door. You're still removing defects, however.
Brewins, thanks for commenting! Ehh I wouldn't say it's off balance. On the doors its difficult to keep the polisher flat due to my position. Also, Griots did say there may be some vibration issues with the old style 5" plate. I'm going to buy the one they said is " tuned " to the G9 and see if that makes a difference👍
PapaSmurf918 ah, yes, give the 5” tuned plate a shot. 👍🏼
@@c6z061 👍👍 I think I will make a quick video on it as well. To give my thoughts and what not.
I’m sold on the g9. But confused as to which system I should buy. Like which pads, polishes and compounds. On auto geek they have a number of packages. From my limited research, I’ve decided to go with the g9 with 5 inch backplate BUT there’s a package with meguiers fastcut compound, others with griots garage yellow bottled ones, pinnacle, etc. A little overwhelmed. My budget is only 200$ so it’s limiting.
Great choice my friend. 👍 Griot's Garage also has kits. I'd recommend the Boss Correcting cream and there orange pad. It's a great starting point! Something like this would be great. Browse there website. I'd definitely purchase direct from GriotsGarage though. To get there warranty.
www.griotsgarage.com/product/g9+orbital+2+step+ceramic+kit.do?sortby=ourPicks&from=Search
@@PapaSmurf918Detail Warranty is an important consideration; looking into their kits now. Thanks for the suggestion
@@AteebTallaat No problem my friend. I only advise cause I bought a g21 from another site and didn't like it so I tried to return it and they wouldn't take it back. Was a hassle to try and get my money back. Ended up with a gift card to Griots 😒 lol.
@@PapaSmurf918Detail Nice
About how many of each type of pad should I have in order to begin doing paint correction as a business? I hear some say they use as many as 12 to 15 pads on one car.
Variety is always good to have as every car is different. But, if your using a foam pad like the ones here you'll be ok for just starting out! 👌 as you grow into more paint polishing and into going after more defects and being comfortable, you'll start adding different pad combinations 👍 Urofiber and microfiber.. wool ect. But to answer your question I only use 2 pads per vehicle once I've found my combination. I'll rotate them after a few panels always blowing them out after each pass. I'll clean one an set aside and put fresh pad on. By the time it's ready to clean the other pad is ready. If your looking for efficiency, having 7 or 8 pads to just swap out and go to work ever other panel that's totally fine. Everyone has there way 🤜🤛
@PapaSmurf918 Thank you for taking time for me. I am very much a beginner, but I do have an unusual advantage. I have thousands and thousands of hours with both an angle grinder and most importantly a pneumatic polisher in my hands. I am a stone fabricator by trade. I have loved cars my whole life since knight rider episode 1 and others. After hundreds of youtube videos now, from detailing equipment to tutorials, I feel strongly that paint correction and polishing are a natural progression for me, like I am going to do well with it. Can't really explain it, I am just drawn to it . Sorry for the novel. Cheers
@chrisgermany5919 Not a problem man! Anytime! That's fantastic you'll pick paint polishing uo very quickly!!! You'll find it's extremely addicting and fun when you start seeing the incredible results. Feel free to reach out for anything. 🤙✊️🤜🤛
Nice video, but get the boss21 the cord got screwed in 2 days on the g9 , if you bend the cord like 20 times it will get lose nice powerful machine but my boss21 has lasted 4 years , so i think the g9 is for beginners not for detailers doing 3 Aston Martin’s per day
Sorry to hear that! I agree, it's a great polisher for beginners. Have you contacted griots for replacement? I'd love the G21 😬 hear nothing but great things! 3 cars a day is a LOT. Thank you for commenting my friend!!
Thanks for the great video! Would the less aggressive Griot Complete Compound or Boss Perfecting Cream work on those seemingly normal swirls?
Thank you!! The Griot's Complete compound will be more efficient than the Perfecting cream if both were used with orange pad. I have tested both👍 however the Perfecting cream has a better working time and is a little more user friendly. The best part about Complete Compound is you can buy at your local auto parts store vs having to order.
do you have a code coupon for this weekend of the 4 of july for the griots polisher ?
Unfortunately I don't! I sure wish I did!
Awesome job
Thanks, J I appreciate it!!!
Hey Papa, going from the harbor freight to the G9 prob isn’t the best comparison but how’s the noise level of the G9? It comes across as noisy on videos.
JD, so for noise level it sounds louder in the vids for sure. However it is definitely more quiet that the Harbor Freight da.. even after re greasing my harbor freight one it's still more quiet. If you are coming from the Chicago Electric feom HF it's a huge upgrade 👍👍
I still use the old Milwaukee rotary polisher and have been for years. But I need to evolve to a newer DA polisher. I like Griots warranty. I'm leaning towards the new redesign G15. It is more costly but may be a better option for me. I custom paint and heavy on my clears, a lot of the times I cut with sand paper then polish. But I have been watching more videos of the G9. G9 cost less but from the reviews I seen It may be power full enough for what I do? What if you had the extra money would you get the G15 or the G9 is enough?
I had the G21... the new design and just didn't like it. Got very hot and the vibration was a but uncomfortable. I returned and since then got the Shinemate ex620 15mm and its absolutely a smooth powerful machine. I'd definitely look into that!!! I have been using mine and love it!
@@PapaSmurf918Detail Thank you for the reply, I am watching the reviews on the shinemate ex620 15mm. Really cool Brotha
@MrCeez1 No problem man! Anytime! 👍
NICE JOB! how long would you say it takes to finish polishing that size car?
Thank you!!! Appreciate that. Well I'd say it's a solid ( for me ) 4-6 hours depending on distractions. Also, factor in getting it striped and prepped for polishing takes some time as well. I'm not doing it for the money so I like to kinda take my time and what not. You can get around quicker with a good AIO like finishing sealant from Griots however the swirls were to bad. Needed more correction. Hope this helps!
We have a 19 Accord with water spotting on the silver/chrome trim any advice on removing those. Nice work btw.
Thanks, JT! ummm.. If they are pretty etched in. I'd prob start with a light polish maybe on the tip of my finger with a microfiber towel and lighty rub it in. ( test a small spot first ) and then see if that works. Should take care of it. Then put down some protection on it afterwards to try and help prevent it from happening again👍
try clay first
Great job, it looks like you're using the old 5 inch back plate, any noticeable vibration? Do you think its worth getting the 5inch back plate for the G9?
Thank you, Clay! I did notice just a slight difference in the vibration when I put the 5" plate on. But off of the paint. With it on the paint it's so minimal it does not bother me. I will get the one made for it though. If you are going to buy one definitely get the new one tuned to the machine. I only used it because I had it. I'll be getting one myself and be sure to let you know if there is a difference. Hope this helps!
Thx for the great video. I’m about to buff my 93 Mustang with single stage paint with my new G9. I’m starting with the Griots Perfecting cream with maybe the red or black pad... I will be going very light pressure especially on the corners and edges. Any tips???
Thanks man! I don't have much experience with single stage, however you seem like your on the right path. The Perfecting cream with a black pad would probably be good. Just check your work frequently 👍 light pressure, let the machine do the work. If you can't get it perfect don't keep trying to go after that " one " little spot lol. The corners and edges definitely try to just keep the polisher moving, I wouldn't hang around in the same spot long. Hope that helps! Keep me posted and how it turns out!✊👍
PapaSmurf918 Ok thx for the info. I’ll keep u updated unless I go into the primer.... then I’ll just fade away..😜
@@jeffsond 🤣🤣🤣 you got this!!
PapaSmurf918 Thx for the encouragement...a friend of mine who is no detail guy but a true car guys said “bring ur car over here, I’ll show u how to buff it.”. He has a Griots buffer and some perfection cream along with correction cream. We spent 15 minutes on my fender and wow!!! So easy I decided to buy the G9 starter set and give it a go. Long story short. I ended up taking my Mustang thru a touch less car wash (which I never ever do) I did because it was in the shop during a winter storm. Then had to drive it home thru salty roads. The touch less car wash took every ounce of shine off my paint and left soap stains that wouldn’t wash off. Shell paid me $450 to have it buffed out. I decided to do it myself and save $225. I’m going to enjoy doing it myself. I can only blame myself if I screw it up.
@@jeffsond sorry to hear about the car wash!!! And well that's awesome you decided to do it yourself man. It's really not hard, and it's not as scary as it sounds! You can get some great results with the G9👍 shoot, I got great results with my Harbor freight DA and some Megs ultimate compound. That's what made me want " more " 😄😄
Can you please provide a link for the swirl finder light that you used?
Mark, this is the light here I have
www.amazon.com/Astro-Pneumatic-Tool-50SL-Rechargeable/dp/B01CHP76CU/ref=mp_s_a_1_3?dchild=1&keywords=astro+pneumatic+50sl+color+match+light&qid=1606713010&sprefix=astro+pneumatic+50&sr=8-3
Soooo griots g9 or g15 which should I get. I have been using a porter cable 7424xp. Thanks
Hands down G9🤝🤝
Hi PS, On Fabs livestream last night I saw you mention that you had just purchased a new air compressor. Which one did you get? I've been researching them as I'm in the market for one also. Trying to figure out which one to get.
What's up man. Yeah I ended up going with the McGraw 20gal 135 psi. Its oiled not the electric. Its actually not as loud as I expected. Used it to blow out my Pads after each pass. Much much better than my old little 8gal one. Should work awesome blowing out interior during detail. So far. Solid compressor.
@@PapaSmurf918Detail I was just looking at that compressor. what do you think of it so far? I use to detail cars for 10 years and now I am a painter but looking to get back into it for fun and some extra cash.
Do you still use the Griots polishes and pads? Been looking at them but SO MANY choices!!
Stephen, YES! I highly recommend them.. the BOSS Correcting cream and Fast correcting cream are my absolute favorite.. the fast correcting cream with the boss microfiber pads is an absolute killer combo... finished out when needed with the perfecting cream and the perfecting cream pad👌👌 phenomenal
We’re did you buy those plastic shelfs to your left? There nice
J, the shelves with my products on I bought at Costco a while back. The plastic Bins which I store my microfibers I bought them at Walmart. Its 2, 3 drawer storage bins I nust stacked them on top of one another👍
Do you have to get the GG 5” specific backing plate or will any other vendors backing plate work with the G9?
Matthew, they recommend the newer backplate but I used my old GG 5" plate on my G9 and had 0 issues 👍. As far other brands, I'm not sure.
Papasmurf. Well done! Does the G9 stall alot?
Thank you!!! The G9 does seem.to stall fairly easy on speeds up to about 3. On non flat surfaces. Gotta get up to about speed 4 to keep it spinning. When using my red wax pad at the end to put on my sealant ( Griots Liquid Poly Wax ) usually I'll use speed 2 but it was just stalling to easy, found myself using speed 4 which is normally not needed to just spread wax/sealant. However that's what I needed to do. Hope this helps! 👍🤙
Wow that blue popped great job Eric. How do you like the G9?
Its popped so much better!!! Man, I really like the G9. It stays cool and gets the job done. Not very powerful on first 3 settings. But 4, 5, 6, it's got plenty. 👍
Do the washer mod on this !! Great difference
I'll definitely do so.. don't use it much now that I have my Maxshine polishers lol appreciate the tip! Thanks for watching
Between the Griot's G9 or the Maxshine M15 which one do prefer?
David, I'd have to say the G9 man. I love my my m15 pro BUT it stalls too easy. I know some people say there's doesn't stall at all. But mine does. My G9 doesn't stall nearly as easy. And its lighter and more comfortable. I'd go with the G9. If my M15 Pro didn't stall so easy that might be a different story. Hope this helps!
@@PapaSmurf918Detail do You have the m15 pro 2 or the original version. Apparently, version 2 corrects excessive shaking
@@bzorro1 unfortunately I bought the m15 pro then shortly after they released the series 2 lol. But still gets great results. Stalls a bit easy but I learned to work around it. 👍
Did you change the g9 to the 5” disc or stay w the default 6”. If I buy do I need to go to the 5”?
I did swap to the 5" backplate.. I highly recommend doing so.. machine feels much better with a 5"👌🏼👌🏼
Should get the g9 or dewalt polisher for headlights and accessories?
I'd recommend something like the G8 3" polisher for headlights👍🏼
what's the difference between G13 mini and the G8 mini ?
The g13 will have a 13mm throw vs the 8mm throw of the G8.. more throw = faster defect removal. However the longer throw is not as nimble as the shorter throw units. The smaller throw allows you to get closer to a body line or edge with a little more precision 👍
@@PapaSmurf918Detail I own a 2018 f150 XLT extended cab 5.0
I own a 2018 f150 XLT extended cab 5.0 Ii want to get the G9 but now the way you explain to me between g8 and g13 what is your suggestion?
@deanfox3920 honestly if I had the choice between g13 an g8 I'd go g13 for sure. But you still need the G9 di ce that will be your 5"/6" unit. 👍
@@PapaSmurf918Detail then the g13 and the G9 that 's going to be
Are you cleaning the pad between panels or changing pads? How much of the car can you do with one pad?
Mark, this vehicle I was switching out pads... I tried to brush them but it seemed the brush was tearing up my foam pads so I just started switching to a new pad. For instance a fresh pad I did the hood. Switch to a new pad and I'd do the right front fender and right front door. Switch to new pad.. do right rear door and right rear quarter. Switch pad and do trunk lid and bumper. And same as I work around the car.. i used i think 6 pads.
Fast forward to now.... I now have an air compressor which I blow out the pad after every pass... usually just use 2 pads. Just clean one once it gets to clogged. And set to dry, but the time my new pad needs a clean the first one is dry👍
I rarely use foam pads to cut though anymore. Microfiber pads are awesome!!! I'll use foam to finish out on certain paints. Hope this helps man!! If not feel free to ask more questions!
@@PapaSmurf918Detail what kind of microfiber pads do you use for this kind of soft clear coat?
Now instruct her not to take it thru a Brush type car wash anymore.
Hahahaha yes, I sure did bit I can't control if she does! All I know is it looked great when it left haha.
If you had to pick one G9 or Maxshine 15
Darren, thanks for commenting. That's a tough question my friend. The Griots is MUCH more comfortable and doesn't stall as much. The m15 Pro is quieter and technically you can achieve faster defect removal. My G9 gave up on me after 1 car and I'm currently waiting on a replacement. Will be doing a video tonight in my issue with my G9. So with that being said as of right now my choice is m15 pro. But not by much. Had my G9 not gave up on me, then G9 would be my go to. They both have there purpose in my arsenal 👍
I have both the MaxShine 15 and the G9 which I just got.
From what I'm seeing the G9 is a better built unit and doesn't bog down like the M15
I highly recommend the G9 to anyone who may want to maintain their own cars.
The M15 is great for light polishing and for applying waxes but not the best for paint corrections in my opinion.
I've had the M15 in my lineup at my shop for awhile now and no issues.
I agree Kevin.. my M15 pro stalls so easy Compared the my G9. I think for the price you just cant beat the G9👌 idc if I had the issue or not. When people asked I'd say I reach for my G9 first👍 perfect for the weekend warriors!!
@@PapaSmurf918Detail
I get a lot of vehicles that come to me that the paint is so bad and takes hours and hours to complete.
For those jobs I choose my Flex 3401 or maybe my rotary to get it down quicker.
Problem with the Flex3401 is it rotates left so it pulls from you and not against you.
Now I will use the G9 for corrections that's not so bad to save my shoulder, arms and wrist. Lol
The G9 has a 1000 watt motor and like a 10 amp motor which will help prevent it from bogging down.
I mostly use 5 inch pads but ordered more 6.5 inch pads and will use them on those big trucks with light defects.
@@MrRedex88 ahhh yeah I can see how the G9 lacks in correcting for saving time. I imagine the rotory will make quick work of bad paint. I'm soon going to get into them lol. I too like the 5" pads but when it comes to the bigger flat panels the 6.5 will be much quicker. I wish the G9 was at least a 12mm throw 😄 for just slightly quicker defect removal but hey, having multiple polishers comes in handy in picking the right one for the right job👍
Just got the G9. How is the vibration on yours at Speed 5 and 6 ?
So, I swapped to the 5" backplate.. speed 5 is just a tad bit of vibration. 6 I've never really needed to be honest man. With the 6 " plate it's worse.
What is best product to use to get rid of swirtl and scratches? Thanks!
there is no " best product " my friend!! there are SO many variables to consider.. hard clear?? Soft clear?? its all about testing what you have on the paint your working on at the very moment in time your polishing. One combo may work awesome on one car, yet fail to yield the same results on another. So my advice is this. Always start with a test section and start with the least aggressive method possible. Check your work and if you are happy with the results then stick to that pad/polish/compound. If you feel the need to step up, then step up with either a more aggressive pad or liquid. Once you find what you are happy with then boom! your do the rest of the car. I hope this helps!!
Now with that being said, here are a few combos I use that are great!
3D ONE hybrid compound and polish with Buff an Shine Urofiber 50-50 pad
Griots Garage Orange foam correcting pad ( regular or Boss ) and The Boss correcting cream
Griots Garage BOSS fast correcting cream with the Griots Garage Boss Microfiber pad
@@PapaSmurf918Detail Thank You for taking the time to help with this! Much Love buddy!
No problem man! If you have any other questions feel free to ask! I also will be doing another livestream on this upcoming sunday. Great chance if you have moral questions to pick my brain! 👍
Also, I say your comment on my RUclips App about asking if this is the G9.. Yes, I used the G9 on this entire job👍
Have you had any problems with cord coming Un plugged?
Mark, not from the polisher side. No.
Di you remember how much time it took to polish your Blue Honda with the G9?
Including washing and prep about 6-7 hours👍
Thank you.
No problem!! Filming adds on a few extra hours too. Lol so this was an all day job Haha
What was in the spray bottle you used?
That was my paint prep. Rustoleum grease and wax remover. To help remove any polishing oils
Hey , one more question how do u mix the purple power wash
Which wash? The car wash?
PapaSmurf918 yes the strip wash
Yes the strip wash mixture
@@greggriffin3242 the PP vehicle an boat I think it's something like 8oz to gallon.. but it's so cheap for a gallon it's not that bad. I'll use it straight in a foam cannon though. No water just fill up my cannon with the wash.👍
Can compound be use instead of correcting cream
Absolutely.. correcting cream is a compound.. not to aggressive though. However I could have just as easy swapped to a microfiber cutting pad and greatly increased my cut👍🏻 but when you cut heavy you may leave some haze or micro marring leaving you to have to follow with a finish polish in this case would be perfecting cream.
@@PapaSmurf918Detail right thanks bro so Orange pad could be use with compound and polish u can do two steps with one pad?
Yes you can definitely use both pads.. what's good about the boss creams is you can switch pads based on how heavy you wanna go. But not really a 2 step. A 2 step would be like ok cut using correcting cream with orange pad. Then follow with perfecting cream and perfecting cream pad. 👍🏻 but the orange pad and correcting cream isn't to heavy of a cut at all. You can get away with just that 1step cause it will finish out fantastic ✊🏼
@@PapaSmurf918Detail thanks
No problem 👍🏻
Could I also use isopropyl alcohol as paint prep
You can use a mix of isopropyl alchohol but that could potentially dry out the clear coat.. if you do use it I'd use a lower % of it. For instance I'd say in a 16oz bottle you would only need like 2oz of isopropyl alcohol and the rest distilled water... but I'd rather use a specific paint prep as they are designed specifically for that. Ethos Detox, Gyeon Prep, carpro eraser, Rustoleum grease and wax remover, duplicolor grease and wax remover, ect... hope that helps!!
PapaSmurf918 ok thanks a lot really appreciate it also I’m looking to start doing paint correction for some of my customers I was thinking about buying the g9 polisher I already have some meguiars ultimate compound with mother’s 2nd step polish could I use that with some pads purchased at autozone or pep boys
You can get some fantastic results with those off the shelf GriotsGarage pads.. I've noticed they only have the 6.5 inch ones which is fine cause the G9 comes with a 6" backplate.. I would get you a 5" backplate for it. Also, I forgot to mention a great paint prep I've used. Its Kleen strip prep all. Fantastic paint prep! It's like 22 bucks a gallon on Amazon👍🏻
Back to you wanting to offer paint corrections. You wanna get yourself a few different pads cause every cars paint ( clear coat ) is different. Some arw soft and cut very easy where you may only need a polish pad, however some may be hard and stubborn and need a microfiber cutting pad and the a finish with a foam polish pad. If your sticking to your G9 and the 6 inch plate snatch up a Griots Microfiber fast finish pad from autozone along with a black finish pad. The MF fast finish pad can cut surprisingly well! And when you cut that deep you will get haze and some micro marring.. that's when you slap the black finish pad on with a few pea size drops of you finish polish and finish that baby down!!✊🏻✊🏻 let me know if you have any other questions man!
PapaSmurf918 ok sounds good really appreciate working on a few cars soon I’ll lyk how it goes
Definitely man! If you have Instagram follow me on my detail page its PapaSmurf918Detail little easier to message there 👍🏻
How was the vibration on the G9.
Vibration really not bad at all, John. Its WAY better than my Harbor Freight. For 150 bucks its ( to me ) a great starter polisher for those enthusiasts/weekend warriors 👍
What is the name of that light
Greg, this is the Astro Phnumatic 50sl.. bought off Amazon 👍👍
What do I need to remove wax,sealant from car?
Henry, what I use to remove wax or sealants is Chemical guys Clean slate or Purple power vehicle and boat wash. You can find the Purple power at Walmart for around 8-10 bucks a gallon. 👍 I ordered my Chemical Guys Clean slate from Amazon. I have a videos on both products if you want to check em out! Thank you for commenting. Let me know if you have any other questions!
PapaSmurf918 and after use 50/50 isopropyl alcohol to prep
@@billl8530 Bill, your are correct. I forgot about that step. I assumed he ment like what kind of wash. Henry, I use Gyeon prep and rustoleum grease and was removed. Thanks Bill👍👍👍
I thought microfiber pads were for deep scratches. Severe correction.
You are right to an extent. You can go after deep imperfections with Microfiber pads but not all Microfiber pads cut the same. They have several different Microfiber pads that you can use that will cut faster than foam and also finish out fantastic!! they have finishing pads that are microfiber that work awesome. To me, its all about the product your using how it breaks down and finishes out. Some products with finish out better than others and you have to jump to a foam to finish out. All depends how the clear your polishing reacts to the pad/polish combo. I hope this helps!!!
I have a badly oxidized gel coat on a big motorhome. Griot’s suggested an orange foam pad and Complete Compound. They also suggested the same for a single stage paint with auto car wash streaks/spider web.
@@Swimdancer1 that sounds like a good safe starting point. 👍👍 do a few passes and check your work.. if it's working stick to that! Keep me posted my friend!! I just know gel coat is VERY hard and stubborn from what I have been researching. You may find you need to step up aggression. But, I could be wrong! I've never done gel coat however a friend of mine wants me to do his boat so I have been researching lately 😄
I’ll be getting the G9 soon. I hope that mine doesn’t have the trouble that you had. Thanks for your vids
I hope so as well man. The problem is the cords. The machine itself is fine. You will love it! I have done about 5 cars with my G9 and its a solid unit.. tons of power. Very comfortable to hold. Let me know when you get yours and how you like it!👍 I do recommend the 5" backplate though🤜🤛
No clay bar?
I did clay it👌👌
What would u charge for a job like that bud?
Hey Mando! Thanks for commenting. As far as price, it's hard to say mainly cause I don't really do it for money LOL this was a family members vehicle and was her birthday gift. However granted it took me all day I'd be comfortable at around idk 400-500 bucks. So much goes into it and some people really don't get how much work it actually is. Hope this helps man!👍
First!!!!!
Boom baby!!! 👍
I still see swirls.
Me too... lol wasn't going after perfection brotha .. thanks for watching!
This is not a 2016 Accord , a 2015 Accord instead
Could be. Lol I think you are right! 🤦♂️ 2016 is the newer style. Thank you for informing me.! 👍🏻