Solidworks tutorial | Sketch bench vise in Solidworks | Solidworks

[@luisromero-eg8lb]

Thank you so much! For the first time in my life I watch a 1:30h tutorial!

[@shanker1122]

The best thing I have always notice in every CAD CAM TUTORIAL video, sir u explain all commands which you are using in that tutorial. This makes a unique tutorial for me. I try to see all your videos. I always ya something new in your video. Thank you very much to share your knowledge in such an easy way.

[@delmerclark8383]

I just made this this week before I found your video...It took me 2 days to do what you did in an hour and a half. Definitely envious of your skill here. Good video. On a side note I just started working on Solidworks on Monday of this week too. Maybe after a couple months I can be as skilled as you.

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching. i hope you enjoyed.

[@raygonzo396]

Great video. Make me look like I know what is m doing in class

[@sayhan3631]

Hey I was doing a similar vice bench and I was stuck on the 1:29:32 as to how to do the advance distance mate. You managed to clear it up sir. You are a life saver !

[@manuboker1]

Thanks! wonderful SOLIDWORKS instructing videos! 😎

[@abubakarakbar8904]

I am very big fan of your tutorials
Keep it up
May God help u in all fields of life all the tutorials were greatly helpful for me...
Thanx

[@osempo]

You just saved my grades, thank you so much :D

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks i hope you enjoyed.

[@krishaansh2156]

@@CADCAMTUTORIALBYMAHTABALAM can you please send the steps to make bench vise??
email= [e-mail]

[@mostafasalem3598]

Can you send me the paper with the bench vice's dimensions for this tutorial? Thank you for your collaboration and effort.

[@chandashula6310]

i really enjoy your tutorials

[@CADCAMTUTORIALBYMAHTABALAM]

Chanda Shula Thank you so much :)

[@henriquemiguel7890]

IS THERE ANY TUTORIAL INMASTERCAM ON HOW TO DO THIS PIECE? IT WOULD BE LIFE CHANGING FOR ME...

[@davonetoney4551]

You made it look so easy. Thanks for the video.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@kkumar7396]

May I get ready-made drawings of component & assembly for purpose of practice ?

[@pandurangbhoyar9439]

amazing sir, thank you for this tutorial.

[@glennfelpel9785]

Enjoyed this video very much. Thank you for your efforts.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching

[@anastasisklimis1781]

I did it thank you alot.I have a question regarding the cosmetic thread,why did we do that and when we have to do it?Thank you again for your amazing work.HI from Greece !

[@CADCAMTUTORIALBYMAHTABALAM]

cosmetic threads saves your lot of time which is required for creating a thread,

[@bahirdarcoffeebuna8364]

Do you have hydrolic bottle jack on solidwork please if u have suggest me

[@chandashula6310]

i am in love with solid works but i am just beginning

[@CADCAMTUTORIALBYMAHTABALAM]

Chanda Shula Thank you so much :)

[@anilciftlik2413]

Teşekkürler dostum güzel video.

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching.

[@eldadtsabari]

Hey, thank u for the video! Do you have the drawing of the parts? Can u send them too me? I want to bulid this part.

[@farragmonir7544]

you used solidworks 2017 or 2016 ؟

[@juann9771]

did you have the drawing of the bench?

[@levivermeer9948]

Very good video thank you for the help.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@fer0ss]

Learned a lot, thank you!

[@lamborghini9651]

gracias por el tutorial amigo, aunque estaba en ingles la hice tal cual 🙂

[@kandasamyrajan]

Thanks for the video.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks

[@gerhardtatah3217]

Can you please complete this on autocad aswell please

[@denzoa8288]

If 3d printed ,will it work)

[@phiyaphornsrisomboon6993]

Thank you sir. (ขอบคุณมากๆ ค่ะ)

[@CADCAMTUTORIALBYMAHTABALAM]

welcome, please share our videos which is help us to do more and more in Solidworks thanks,

[@nonnanon152]

ผมเจอคนไทย wowowowow

[@yafetaraia1016]

Great video! Thanks a lot.

[@sergiorafaelosunaaguilar8718]

Muy buenos videos, gracias por compartir.

[@angelpoma6686]

You could upload the video, only when assembling and disambiguating. Thank you

[@riyanherma]

Thank you sir. I can learn from your video. If you have the Machine Drawing. please insert it every you make a Part to video.

[@CADCAMTUTORIALBYMAHTABALAM]

ok i will try in next video.

[@elishambise7966]

Thank you. I was looking for this

[@markomet8193]

i got some problem using mechanical mates screw, when i define the mates it sawn as error. can u help me?

[@lvstr._444]

excelente

[@RajeshSingh-zx5pi]

Thank you.

[@eng.khaledjadi4884]

Dactor.May you give me your feedback about the project contacting bar please

[@CADCAMTUTORIALBYMAHTABALAM]

give me time i will check.

[@eng.khaledjadi4884]

thanks dactor.May l ask you about contacting bar

[@CADCAMTUTORIALBYMAHTABALAM]

ok.

[@draza1502]

Thank you sir 😅😅

[@jdmather5755]

What book are you using as your source of information (I already know - but I think you should cite your sources.
Where are you getting information for threads?
Is your information correct?

[@chandan_kumar-z2h]

can u do it in 'mm'

[@CADCAMTUTORIALBYMAHTABALAM]

you can convert in mm,

[@mertgulbagce6385]

Thank you sir !

[@khalilibrahim8421]

thx for your hard work but DR.mahtab can you give me dimension for every part pleaze...
"not from video"

[@CADCAMTUTORIALBYMAHTABALAM]

let me create a download link, i will come back soon.

[@khalilibrahim8421]

CAD CAM TUTORIAL where is link?

[@onurkaragoz2689]

thank you so muchhh

[@suriyars6331]

I need help to design double jaw vice for project

[@burjumanullang9343]

Sir, can you give the pdf format?

[@souhig388]

EST CE QUE VOUS AVEZ UN AUTRE MODELE DE LETAU .SVP.JAI BEOSIN

[@herradura471]

toma tu like mi compa

[@munozlopezdavid4476]

Great job, thank you so much

[@krishnajagadeesh6307]

sugar cane machine how to make solid works thank you sir

[@googlefirefox3240]

can you help me please 17:02 i cant make the pierce

[@googlefirefox3240]

it says 'No intersection found for pierce point."

[@antiquarian1773]

i love you

[@eng.khaledjadi4884]

but how l send to you my project

[@CADCAMTUTORIALBYMAHTABALAM]

which project?

[@eng.khaledjadi4884]

I want connecting bar just pleac so if you have Emil kill send it to you

[@CADCAMTUTORIALBYMAHTABALAM]

[e-mail]

[@panjabeeeverywhere715]

drawings of this project?

[@CADCAMTUTORIALBYMAHTABALAM]

its simple you can take the dimensions from video.

[@eng.khaledjadi4884]

how can l send it to you

[@CADCAMTUTORIALBYMAHTABALAM]

search in my channel you will find connecting bar tutorial.

[@suriyars6331]

Hi sir

[@7nko0oshah]

i need this reference 1:09:09

[@evilytlive]

Plz provide pdf file bro.

[@souhig388]

JE TROUVE PAS POUR LE PERÇAGE SIZE 1/4-20

[@CADCAMTUTORIALBYMAHTABALAM]

it is non standard design,

[@souhig388]

BONJOUR ,EST CE QUE JE PEUX VOUS DEMANDER UN DESSIN SVP

[@CADCAMTUTORIALBYMAHTABALAM]

Still i did not create 2D model for bench wise, i will forward once available the drawing, Thanks,

[@salmansheikh5890]

please upload pdf file of this in 2d... please

[@CADCAMTUTORIALBYMAHTABALAM]

which part ?

[@salmansheikh5890]

please sir... all parts

[@salmansheikh5890]

please sir.. i need.. it's emergency

[@eng.khaledjadi4884]

contacting bar

[@CADCAMTUTORIALBYMAHTABALAM]

many tutorial available for connecting bar in youtube,

[@vegasvegas6506]

planos porfavor

[@CADCAMTUTORIALBYMAHTABALAM]

i forget to add in this video but you will find in my all other tutorial videos.

[@sandeepprajapati2188]

Hello Sir, may i get your email ID. Basically i have drawn an part and when i am opening it in solidworks. The featuretreemanager is showing and everything is showing, but the sketch is not visible. How to solve that?

[@eng.khaledjadi4884]

I have sent to you now on your email

[@eng.khaledjadi4884]

Dr.mahtab l have sent to you on email and please give me your feedback as soon as possible.

[@CADCAMTUTORIALBYMAHTABALAM]

i didn't recieve any mail.

[@DD-wm3ek]

I need some help what is your email?

[@afenaraymond2907]

Hi please how can I contact u?