2004 GM Truck 2500HD 6.6 Duramax Cranks No Start
HTML-код
- Опубликовано: 3 июл 2024
- This Duramax was towed in for a cranks no start condition. No Codes related to the issue. Fuel system had lost prime due to a leak on the suction line between the tank and engine. Ran a new piece of 1/2" fuel hose.
Авто/Мото
Love watching the dirtymax videos, since I have one! Thanks Phillip! Love the diagnostic skills and thought process on this!
Much appreciated for this tutorial. Professional diagnostic and informative for my own diagnostics. Thank you
I got a 2010 LMM duramax back in December of 21 and it’s my first diesel, learning a lot from videos like this one thanks for filming it.
The fuel supply system on the various generations of duramax engines didn't really change much imo.
Very good diagnostic procedure..thinking outside the box. Nice to see you diagnose first before the parts Canon. Very helpful for people who do not really understand how this works thank you for your professionalism.
I love how detailed this was especially how you did showing the monitors I find a very useful a lot of people don't do that❤
Thanks for watching
You helped me start my truck thank you boss man
Thank you for this video. Saved me $. Long day after work truck wasn't starting. Just about to get it towed after trying some basics. After watching your video I went to the fuel filter and it lost it prime through water sensor. Luckily easy fix to limp home. Thank you
Glad it helped you.
Thank you only video I found that shows fuse and relay and location.
Thanks for the info, I tied in clear line on the motor to can of diesel. Primed it and bam fired right up, check the two lines on motor and they were collapsed, thanks a lot!!!!
This may be the very video I’ve been looking for…
Thank you so much!!! I did not know there was a way to prime the fuel system from underneath the hood. My 2004 duramax fired right up after cracking the bleed screw and pumping the hell out of it. Saved so much money, thanks again!!!! Subscribed and thumbs up for sure
Great but why did it lose the prime?
Wow!!! Great video, nice to watch and listen to someone who actually knows what they are doing. I’m fixing to have to do this same process to figure out my problem...
I have an 2004 GMC 3500. Parked it after lunch having started it 6 times today and when I went out to pick up one of the kids it wouldn’t start. Turned over nice with plenty of power but sounded like it was out of gas. I’m @ 1/4 tank and was actually planning to fill up after getting the kid. Found your video and primed her back up. A little air came out then fuel right away. Turned her over a few more times and started right up. I’ll take her out for a real drive in the morning and keep and eye on her. Thanks so much for the video.
If you're in the Salt belt you may have a rusty suction line between the engine and tank allowing it to suck air. Otherwise be sure the fuel filter it not loose and could be check valves in the filter leaking. Good luck with it.
I started my 05 3500 dually & when I put it in reverse it shut off. Stranded so I looked at your video & primed it. Never had any more issues as of right now. Thank you for posting.
This is a great diagnostic video.
I’ve got an 03 LB7. Truck has over million Km. I built a new engine about 10 years back. Original was getting some blow by. With this much history, you just get to know their quirks.
But yes, these fuel systems leak. Especially at the primer pump. I’ve rebuilt mine 2 or 3 times. It’s basically an O ring kit with a new bleeder screw. And I’ve also had pinhole leaks right by the cooler. So I replaced the main fuel line with braided rubber.
That is correct!
You know you can always have me as a helper phill
Wow gave me some awesome ideas learned something new for sure
you are amazing.. thanks for sharing content.. good work
Thanks for watching.
@@PhillipBailey question what you think about the new 3.0 Duramax diesel ? Is good engine I want buy one but I keep my truck for12 to 15 years and I never owned duramax
@watchmanexpert sorry but I haven't had the pleasure of working on one yet. As far as I know there haven't been significant problems with it but they haven't been out long either.
Great video I just learned a lot
Glad it helped you out
that a good trouble thanks great job
*Thank you so much. This really helped.*
Glad it helped!
Love these videos....my '04 has been losing prime since 2007....when my tank is past half full and I park with the nose below the bed by even 6" or on a hill, she will start right up...but if it sits or is parked level the prime is gone. Mine takes 24 prime pump presses in general....but I have got a feel for the right pressure level after all these years. I rebuilt the prime pump but that did not do it... I suspect I have a pinhole leak somewhere
Rebuilding the filter housing usually does not include replacing the inlet and outlet check valves in it in my experience. Try putting a piece of clear line on the inlet near the back of the left valvecover. Prime and run it. If you see a continuous stream of small bubbles then you have a suction leak. No bubbles after running 15 to 20 minutes I'd change the filter housing. Good luck
@@PhillipBailey well, thank you for those suggestions. I will take that advice. I think I also have a compromised fuel pressure regulator and thermostat....I am going to go against my ego and cave and take it into the dealer to have it looked at LOL!!
Lift pumps are awesome
So I’m losing prime after a brand new housing, i build about 600 psi of pressure but can’t get higher. It is a brand new housing and I put 20L of fuel into the tank to make sure there’s fuel in it. I can’t find any leaks on the truck and it won’t start. I looked at the lines and can’t see anything. Any advice?
I got a 2009 chevy express duramax, it cranks over fine , but this one doesn't have a primer deal. I wonder what could it be, i know that when it starts it leaks a little bit of diesel from somewhere. When batteries where replaced it started but next day didn't. Hope you give me some advise. Both fuel filters are new.
One way to crank the engine while under the hood is to uncover starter relay and tap the tab or make your own remote, my 02 won't fire up hopping to figure it out soon pretty Shure it's a fuel pressure issue
Thank you
I have a 06 duramax, I drove it from a 13 hr trip and parked it a couple weeks. I got in it and went to town left it running while in store, came back out and ut wasn’t running. I changed the primer filter housing and filter recently, now it’ll run for 20 mins and die and won’t start. It has a half tank of fuel and has brand new batteries in it. Also it doesn’t have any codes and we used a snap on reader. Any help would be appreciated!!!
Is it loosing prime. Try priming the fuel system. Make sure the filter is tight as it's under a vacuum not pressure. You may end up installing clear hoses to check for bubbles. Is it developing fuel pressure cranking? RPM cranking on scanner.
Commenting on the video for the algorithm
Transponders start in 2002 but only in LT or higher trim packaging. I've had to program a lot of keys for 2002-2008
Yes I had a brain fart there...
My lly do this too but I went I do the diesel purge turn on and sometimes turn on and dies and won’t star until a purge
Did it start up the next day?
I’m having the same problem with my lb7 ram amazing after new injectors had a fuel leak start on a line running from rail to injector made it tight again ran it for a little trip gave it a good rev and it died won’t start up again can prime it from the filter crank it over and lost prime.
Check the fittings on the suction side of the fuel pump for a suction leak possibly.
I’m stuck in a random city and my 2003 duramax won’t start, it will crank but it won’t fire, I’m getting fuel to the fuel housing but can’t get it to start
You need a scan tool to check fuel pressure and rpm data while cranking.
P1093 and p1094 codes with rail pressure not matching at wot only . Thinking bad pump but replaced pump and now still getting no start unless I spray it , so I know it’s fuel related but hope it’s not injectors cuz I have no sign at all of bad injectors . Hope it’s just a bad pump out of box . What would yall think with the little data I gave ya . P1093-1094 rail pressure 8k and desired at 23 k at wot only , other than that pressure it’s spot on than trucks cuts of sitting there idling . Had to prime filter head to start it . Drove ten minutes cut off at red light . Had to prime the hell out of it even with fass lift pump got it running and dies 20 feet down the road and limped
It home . Replaced cp3 . Got no start unless with spray , got the p0089 code and surge at idle but pressures were spot on while driving but now no crank still . Fuel leak at cp3 fittings and somewhere on back of housing . Sent it back , have another pump otw! Help me save some money for diagnostics trying to save money
I commented on this on the other video
These engines have fuel filter housing issues letting air into fuel system thus loosing it's prime, put a new one on mine and no issues since...
Yes thats true I've changed several but this truck had a suction leak going into the filter. Thanks for watching and merry Christmas
I have a cranking no start issue. I was thinking it was the ficm. New motor, new tranny, new tcase wrnt to town to get parts it ran fine, the next day started truck to go to town and it will not start. Got a P2146 P0201 P0204 P0206 codes. It blew a fuse and l9ss fuel gauge fixed fuse still no start, i am at a loss. I was thinking ficm but everyone says they dont go bad on the lb7
The codes are likely related. Could be a chaffed wire to one of the injectors. P2146 shuts down at least 4 injectors. Check wire routing for rubbed through wires.
06 lbz changed fruel return lines both sides due to bad fuel leak
Got it all back together cranked up ran for about 30 seconds died now cranks but no start
Bled fuel filter housing and primed till fuel came out
have frp at 750kpa on cheap scanner
Still no start any ideal?
You need 10 times that fuel pressure. Around 10 mega pascals to run. 750Kpa is 0.75Mpa. If you are sure the lines are connected correctly keep priming it.
hi, nice video, I don't understand so much English why I come from switzerland, I have a problem in my lb7, so you have only change the fuel hose right? thanks a lot for the answer!!
Yes, I ran a new fuel supply line from the tank to the engine. I was losing prime.
My lbz just started loosing prime cant find rhe problem anywhere replaced the fuel filter with housing the sensor on the filter is not leaking. Replaced both lines going to the fuel filter housing. Cant see any leaks anywhere from the tank all the way to the fuel injectors its driving me nuts
Try plumbing in some clear line at tge connections near the back of the left valve cover. Prime it and run it for at least 25 min. Watch for bubbles in the supply and return circuits. Could be a leaking banjo bolt gasket at the ficm. If its stock all those lines are suction. Good luck
Did you figure out your problem
@bryanrodriguez6759 bad injectors leaking fuel into cylinders only when hot but not enough to cause smoking while running
So i just swapped out all my injectors. Truck ran before. Now i prime it and get fuel out the screw but when i crank it, it loses fuel pressure. Any advice? I dont see any leaks anywhere other than the bleed screw. Thank you
If you replaced the injectors the HP fuel system is empty and it takes a significant amount of cranking to purge the air. Battery charger and don't overheat the starter. Max 15 seconds cranking then 2 minutes to cool off. Try see if it will fire up on propane or penetrating fluid. Don't use either.
@PhillipBailey ok I will definitely try that tonight. Thank you for the advice.
@@brunocuevas8761 let me know how it works out for you.
When I prime it and go to start it the frp stays at 1 after 5 seconds will climb to 2 and when I shut it off it instantly dies back down to 1 and won’t climb past two and I followed your steps just to try to get it started but nothing seems to be working? Any advice?
You likely have one or more fuel injectors with excessive return fuel flow not allowing the fuel pressure to build up properly.
@@PhillipBailey are you familiar with the 15 second test that shouldn’t exceed 100ml. Mine is barely even returning fuel on that test?
Or is there a better way to test the injector return rate?
@Omar Mahmoud well if ots cranking fine and the fuel pump is primed then I would call the cp3 pump but honestly I've never replaced one... Another possibility is a cracked injector body and fuel going into the crankcase. I did have that once. Check the oil for overfill and dilution.
@@PhillipBailey I replaced the cp3 pump finally a month later. And still no start. On the return line hose there is a ton of air in it i used a clear hose. And on the live data the frp won’t build passed 2. And the moment you stop cranking it drops back to 1 right away.
@omarmahmoud9628 are you sure you don't have a suction side air leak. I'd put a section of clear line at the fuel inlet at the rear of the left valve cover to rule out a leak along the frame to the tank. Once primed you should not continue to see air bubbles going into the fuel filter. Check the fittings on the injection control module banjo bolts sealing washers.will it run on propane?
What if it starts at times and just cranks most other times?
You have to figure out what's missing, fuel pressure or injection signals. Have you scanned it for codes? Is there an RPM signal cranking? Do you have fuel pressure and if so how much?
That was cool!!
Thanks for watching.
mY 07 DURAMAX after sitting for the winter wouldnt start. Bleed and start for 30 seconds and quit, turned out the water in fuel sensor on bottom of filter seals on the paint of the filter and the paint was cracking and stuck to the o ring, obviously did'nt change the filter often Over a hundred bucks at lordco
Yes a leaking filter or wif sensor can act the same way.
Is it OK to spray a tiny bit of starting fluid?
Using starting fluid is very dangerous
If you spray starting fluid in any engine it should be turning over before spraying so it’s less harsh.
I’m currently having issues with my truck. It’s a 2004 LB7. Ran perfect before I changed the transmission lines. I removed the passenger side wheel well covering and only unplugged the MAF sensor on the intake. I started the truck after installing new lines to check for leaks and turned it off. I had the passenger side intercooler pipping disconnected during start up. But it still fired up. After putting everything back together. The passenger side intercooler pipping made contact with the positive post on the battery cause a small quick spark. When everything was back together and plugged in. The truck didn’t want to start. Cranks, no code. DFRP is 6.1k and it makes 6k. There RPM signal, on a scanner I can see .1 or .01 MAP reading can’t remember. Again, truck ran perfect before line replacement. And fired up 30 minutes before putting it all together. Any suggestions
I'm not sure what's going on. So you say you have an RPM signal on a scan tool and rail pressure reaches 6000psi? What's the Barometric pressure reading and the MAF sensor cranking. Try unplugging the maf sensor.
@@PhillipBailey I’ll have to go check the Baro reading. I tried unplugging the MAF several times also tried disconnecting the battery cables for 10 minutes, twice, and 1 times for 45 minutes. No luck. I’m thinking a fused popped when the turbo piping contacted the battery positive. I just can’t find a popped fuse. 30 minutes before putting everything back on. It was running just fine
@@PhillipBailey 3 things happened. 1 disconnected the MAF during the transmission line replaced. But also connected it and started it up without the turbo pipping connected. 2. Pipping contacted the positive. Which sparked up for a split second. 3. The windshield washer supply line was cracked right next to the fuse block and it sprayed water all over it.
@SubePelayo928 that's definitely a strange one. Do you have a scanner to look at data?
@@PhillipBailey just a cheap scanner from Harbor Freight. But it does show data. Not too sure what I should be looking for
May be my ignorance but did you really bypass the fuel filter and the FICM? Because if so them injector’s are toast 😂
I replaced the steel supply line between the tank and the inlet on the engine with neoprene hose. the fuel filter and FICM are still in the circuit as normal.
Where do you get a stainless steel brake line kit?
For 2000 to 2007 they are available from Dorman through most parts suppliers. There are several different kits depending upon wheel base and brake options.
@@PhillipBailey Thanks for that info.
I have an 04 durmax with 140,000 thousand but it cranks put it won’t start just like that but there’s no rust on the truck I’m not sure what it is. Does anyone know.
Did u fix it?
I have same truck
@@JoseSanchez-wh1zb yea, it was the primer pump
Hey bro did you get your truck fixed ? I have the same truck yesterday morning it started and then died and now it’s just cranking like this did that happen to you? Or did it not start at all until you changed that primer pump
@@Yommamommafucksme it did put I had someone try to start it wile I was pushing on the primer pump to get air, it starts, don’t let it sit to long or it will turn off, but replaceing the pump soon.
Hi so there is no lift pump
No there is not at least if it's stock.
Sure to be interesting.
Did it fix it?
Yes it did
My lb7 just cranks and has a code p0090
That code is typically caused by a faulty fuel rail pressure regulator.
Sending unit for mine or that's what coworker said.
Yes thats possible as I believe the outlet tube is steel and will rust.