I’m with you, forget taking off all them bolts to remove that brace. But that tranny fluid Niagara falls is a bit of a mess to deal with. I took a old hydrogen peroxide bottle cut it up in about a minute to make a little open pan/channel to keep the fluid off the brace and right into the pan. All my mess was from filling… 😂 Thanks for the video though. I might have taken the damn brace off otherwise. 😅
The ALLEN WRENCH is a BRAND name, like Craftsman or SnapOn, It is a HEX WRENCH ! ALLEN invented it per say. AND No real need to change the transfer case or trans fluid. it is life time. notice there is NO dip stick ?
Good video. Thanks
You’re welcome
I’m with you, forget taking off all them bolts to remove that brace. But that tranny fluid Niagara falls is a bit of a mess to deal with. I took a old hydrogen peroxide bottle cut it up in about a minute to make a little open pan/channel to keep the fluid off the brace and right into the pan. All my mess was from filling… 😂 Thanks for the video though. I might have taken the damn brace off otherwise. 😅
Thanks for checking in, great idea with making a funnel above the brace. I’ll have to do that next time.
So easy and cheap, I’d do every year for peace of mind.
Yes, cheap insurance.
weird but my fill plug seems to be on the left towards the exhaust. JTR
You probably have a slightly different transfer case. Do you have an auto 4x4 setting?
What allen wrenches are you using, I am trying to look it up but no dice.
10mm allen. I have a set of Hex Pro Allen wrenches with the swivel joint. A search on Amazon will find them.
10mm allen. I have a set of Hex Pro Allen wrenches with the swivel joint. A search on Amazon will find them.
The ALLEN WRENCH is a BRAND name, like Craftsman or SnapOn, It is a HEX WRENCH ! ALLEN invented it per say. AND No real need to change the transfer case or trans fluid. it is life time. notice there is NO dip stick ?