DIY E53 BMW X5 Oil Filter Housing Gasket Replacement M54

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024
  • Join this channel to get access to perks:
    / @zeiten
    Hey guys, in this video I'll take you through the process of replacing oil filter housing gasket on BMW's M54 engine. This job is performed on BMW X5 E53 but it s pretty much the same on all other models equipped with this engine as well as M52TU
    Thank you for watching, like share subscribe!

Комментарии • 52

  • @rodolfopaillaman2107
    @rodolfopaillaman2107 Год назад +5

    There are very few videos for the 2000-2006 X5 M54's engine repairs. Extremely grateful for your Video, and your expertise!

    • @Zeiten
      @Zeiten  Год назад

      Thank you, appreciate your feedback, those are not very popular cars nowadays but in my opinion one of the most reliable engines and cheap to maintain😉

  • @ufohunters4612
    @ufohunters4612 Год назад +3

    I have the same suv and cant thank you enough for makig these videos !!! Cheers my friend !!!

    • @Zeiten
      @Zeiten  Год назад

      Happy to help🙌

  • @tonyquance3737
    @tonyquance3737 2 месяца назад

    Easier to loose fit Vanos line to the housing while it is out of the car. Less fiddly than trying to install it after, then just tighten the banjo.

  • @BruceLeef
    @BruceLeef 4 месяца назад +1

    Is the procedure exactly the same with a 2003 x5 4.4 ... ?

    • @Zeiten
      @Zeiten  4 месяца назад +1

      There is no oil filter housing gasket on m62 engine since oil filter housing is separated. On n62 engine either although there is an alternator bracket gasket and it’s completely different job

    • @BruceLeef
      @BruceLeef 4 месяца назад

      Ok.. thank you for your speedy response.. when i start my vehicle oil is over flowing from the top housing ..I replaced the filter and o-ring but oil is still being pushed out from the cap as if there's no o ring .. ​@@Zeiten thank you

    • @Zeiten
      @Zeiten  4 месяца назад

      @BruceLeef try replacing oil filter housing cap itself they deform over time

  • @lost0824
    @lost0824 Год назад +1

    I just found out you are located in the LA area wondering how I could reach you for some services if that’s possible ?

    • @Zeiten
      @Zeiten  Год назад +1

      Sure type in zeiten on yelp you’ll find everything there

  • @sadicengiz2252
    @sadicengiz2252 10 месяцев назад

    Filitre kabı yağ ile dolu olması gerekiyormu ? Yağ valfinin sağlamlığı nasıl anlaşılır

  • @أحمدخريبين-ق9ر
    @أحمدخريبين-ق9ر 4 месяца назад

    Hello friend
    You have a video on how to replace the crankcase filter x5 e53

    • @Zeiten
      @Zeiten  4 месяца назад

      You are probably talking about crankcase vent valve here it is
      DIY E53 BMW X5 Crankcase Vent Valve Kit Replacement (CCV, PCV) M54
      ruclips.net/video/aZSPr12-ba0/видео.html

  • @cisa1622
    @cisa1622 Год назад +1

    I’m planning to buy a used 2007-2009 BMW X5 E70 petrol engine. Are these models less expensive and reliable to maintain. Please advise

    • @Zeiten
      @Zeiten  Год назад +1

      Inline 6 would be the best choice, no turbo = more reliability, so stick with 3.0si/3.0i or xdrive30i same engine

    • @cisa1622
      @cisa1622 Год назад

      @@Zeiten thank you for sharing the information. It is very helpful.

    • @cisa1622
      @cisa1622 Год назад

      @@Zeiten Can I assume petrol engines are better choice for stress free ownership or should I also consider diesel variants without Turbo. I drive very less ( about 10,000 kms in a year- majority is city drive and once or twice in a year a long distance vacation which should be like 3000 km trip- hot weather throughout the year in my place). Planning to use this car for next 6 years. Thank you

  • @darianpierce7761
    @darianpierce7761 Год назад

    I want my truck looked at

  • @rayl3329
    @rayl3329 Год назад

    Great video as usual ! How about ATS Chemical 505CRO for direct injection? It's an oil system flush- would it cause any issues with seals or gaskets. 2015 N20. Thank you!!

  • @atinoteintunovas9969
    @atinoteintunovas9969 Год назад +1

    Thanks for Sharing all you know. I don´t have one like that but it doesn´t matter. Is good to know anyways in case a friend does have one like that and have no idea on how to do it. Take care buddy!

    • @Zeiten
      @Zeiten  Год назад

      Thank you, happy to help🙌

  • @14hubbajo
    @14hubbajo Год назад

    That’s ridiculous

  • @rudylopez4930
    @rudylopez4930 11 месяцев назад

    Can you make a video on how to replace a power steering pump for bmw 328i please

  • @saifoosy7792
    @saifoosy7792 Год назад +1

    Thank you sir, quality videos

  • @VassiliySmith
    @VassiliySmith Год назад

    Привет, Тим, взгляни на проблему пожалуйста, появился шум при работе двигателя (n52) ruclips.net/video/5pKTgBrZcr0/видео.html

    • @Zeiten
      @Zeiten  Год назад +1

      Капай в сторону клапана вентиляции в картерных газов, (pcv) он встроен в клапанную крышку зачастуюон издает похожие звуки правда более монотонные, стандартные тест это открыть крышку залива масла если звук уйдет - меняй клапанную крышку целиком (бери elring)

    • @VassiliySmith
      @VassiliySmith Год назад

      @@Zeiten спасибо, буду чекать!

    • @VassiliySmith
      @VassiliySmith Год назад

      скажи, а ошибку эта проблема какую то кидает? и если вариант с заменой, срезанием старого клапана и приклеиванием нового - такое делал когда то?

  • @nealnarcis2911
    @nealnarcis2911 Год назад

    My coolant line broke I replaced it now my car won’t start can this be the issue

  • @mofopopo437
    @mofopopo437 Год назад

    The stealership wants to charge $100 dollars for that part. 😵

  • @dogger2186
    @dogger2186 Год назад

    Question? Really ned advice. We have 2 - 2007 X5 3.0si n52 engines. (97k & 102K) miles noticed that both had leaks starting on the Oil Filter Housing. Was able to swap both gaskets on the one without issue the 2nd the lower torx bolt the M8X28 (by the mickey Mouse ear hose mount) is frozen and I can get it removed. Unable to get enough leverage and worried about breaking he head off. The other Torx bolts came out with no issue so I cant change the gasket against the block? Any thoughts? Just break it and then try and remove it?

    • @Zeiten
      @Zeiten  Год назад

      Option a) remove the fan you’ll have more room option b) get e10 wrench and point it to the top of radiator (slightly above it) put a pipe on it and break it lose

  • @paulgilliland2992
    @paulgilliland2992 Год назад

    $500 to $700 for a 2.5 hour job ?

    • @Zeiten
      @Zeiten  Год назад

      Yep, LA prices, dealer charge probably would be around 1000-1200$

  • @consentidocomunwithcommons7698

    How we can have your service ( which states you to see have lucky ) thanks you for your service and video are great

    • @Zeiten
      @Zeiten  Год назад

      Thank you, Los Angeles only

  • @crlsortizmtz4624
    @crlsortizmtz4624 Год назад +1

    Thanks again...

  • @lets_get_on_with_it...
    @lets_get_on_with_it... Год назад

    I did mine diy pretty easy. I've got a complicated issue which i cant figure it out. I replaced my lambda sensor bank 2 on e90. Now ive got lambda sensor codes which it wasnt showing its p31 p37 2c9c error. I then replaced both sensor just a precaution but error remains. Please help. Reset was done from my cheap Bluetooth diagnostics tool.

    • @Zeiten
      @Zeiten  Год назад

      What brand o2 sensor?

    • @lets_get_on_with_it...
      @lets_get_on_with_it... Год назад

      @@Zeiten thanks for your prompt response. They are both expensive Bosch sensors

  • @cisa1622
    @cisa1622 Год назад

    Just wanted ask which petrol X5 inline 6 to buy . 2005 E53 or a 2007 E70 . Which one is more reliable and less expensive to maintain. Are there more reliability issues with E70 than E53.

    • @Zeiten
      @Zeiten  Год назад

      E53 would be more reliable and cheaper to fix, simple example parts cost for water pump and thermostat on e70 n52 are around 600$ for e53 m54 it’s gonna be about 100$

    • @cisa1622
      @cisa1622 Год назад

      @@Zeiten thank you for sharing this info. E53 is my choice then. Thank you so much.

    • @cisa1622
      @cisa1622 Год назад

      @@Zeiten here in Australia there are more 4.4 v8 . Saw one with history of service ( 2 ownership) . 138kms odo. Kind of tempted to buy. Are these an absolute no-no cars for reliability. Like long distance travel ( 700kms-800kms) drive in a day is the kind of drive I do occasionally( plus weekend grocery shopping drives- 15-20 kms). We have the glorious sun at very high temperatures . Are these 4.4 v8 an absolute nightmare.

  • @FredyArg
    @FredyArg Год назад

    Hey great videos, do you have any videos oh hot to fix a stuck moonroof for a 2009 X5 E70? It’s stuck on one side…

  • @saifoosy7792
    @saifoosy7792 Год назад +1

    🔥🔥🔥🔥🔥🔥

  • @saifoosy7792
    @saifoosy7792 Год назад +1

    🔥🔥🔥🔥🔥