Bafang M600S ebike motor review
HTML-код
- Опубликовано: 16 дек 2021
- This Bafang M600S is a EU legal motor. It is very similar to the regular M600. Motor characteristics, looks, size and weight is the same. The M600S is rated at 115 Nm, 5 Nm less than the M600. This review should apply to the M600 too, for the most part.
#bafang #ebikemotor #emtb
Time stamps
00:09 Specs
00:23 What sets the M600S apart
01:19 Motor behaviour
05:45 Behaviour on the trails
08:33 Different softwares
09:56 Motor power test
11:18 Motor noise
11:46 Pedalling without power
12:00 Behaviour at cut-off speeds
12:24 Great on snow/sand
12:54 Battery consumption
13:25 A 43 Volt software?
13:56 Conclusion Спорт
Interesting. I'll be sure to do diligent research as to the internal differences between the M600 vs M600s. If the differences vary beyond the standard planetary gear, clutch etc, then sourcing aftermarket components to keep the motors going could become tricky. Although, this motor could be sold with warranty which could alleviate that concern for some.
Nevertheless, epic video. Keep up the vids 👍🏿
Great video, your thoroughness is appreciated.
Very informative vid , thanke mate, keep up doing good job, sbed !
Nice been looking for a decent M600 Vs S comparison and it's decent too thanks 🙏
Great review
Thanks
This channel is so underrated where’s the other subscribers?
Thanks!
Very interesting video. Just discovered this channel today. Greeting from Bergen :-)
Thanks, greetings from just outside og Oslo.
I am thinking exact same thing all the motors vary between which ones are more cadence based and which ones are more torque based at low and high RPM. Which ones are easier to get started on from a stop and slow speed control. I know there are several aftermarket controllers for the M 600 that change many characteristics as well. I have the Bafang G510 with aftermarket Innotrace controller. Things like ramp up control however the developer said they are working on getting more variables
Great review as always.
This is an amazing video.
Look into the LUNA CYCLE X2 Ludicrous V2 M600 motor with power output of 2500 hit speeds of 45MPH, then dial it down for legal riding on trails.
someone can advise where I can buy Chainring guide for the M600 and M510 engine? Thank
What order would you place each motor according to how controllable the motor is? Specialized 2.2, Specialized SL 1.1, Shimano EP8, Bosch CX, Yamaha PW-X3, Shimano EP-8 LIght. Thanks.
A lower power motor will usually be easier to control. So I've talked about "power to control ratio" a few times. Which motor can output the most power while still being easy to control. I haven't tested the EP8-RS yet. The Specialized SL 1.1 is for the most part easy to control, but riding it in everything at max and it isn't that easy to control actually. I haven't ridden the PW-X3, but the EP8 and PW-X2 have the best power to control ratio of those motors.
Hi You can reveal a secret, where you can bought chain ring guide bafang?
Doesn't sound like you are utilizing the pedal assist setting and gear selection to get the cadence and speed you want.
It doesn't matter what gear you're in, the motor will want to spin up to it's native rpm, depending on the battery voltage. 110 rpm on the cranks is the same regardless of which gear you're in. This motor will behave this way in all assistance levels. But dropping the assistance can prevent the motor from reaching the optimum rpm, when going uphill for instance. Down side is it will be quite inefficient and draw a lot of battery.