✨YUKON-TAHOE BRAKE WARNING LIGHTS-10 MINUTE EASY FIX✨
HTML-код
- Опубликовано: 11 сен 2024
- In this short video, we'll show you how to fix the Yukon-Tahoe brake warning light in 10 minutes or less!
✨YUKON-TAHOE BRAKE WARNING LIGHTS-10 MINUTE EASY FIX✨ If you're suddenly getting the Yukon-Tahoe brake warning light on your dashboard, don't worry-this video is for you! We'll show you how to fix the light in just 10 minutes or less, so you can get back on the road in no time. Thanks for watching!
In this short video, we'll show you how to fix the Yukon-Tahoe brake warning light in 10 minutes or less!
This is an easy technique to improve the ground connection below the driver door. Just takes a few minutes to clean and tighten the ground connection that effects the ABS Light.
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday
✨-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
join-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-RUclips Channel: / scottthefixitguychannel
-If My Advice Has Helped You…Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy... -Need More Expert Help with Your Repair?
Disclaimer:Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy. Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
Very good job thanks lot
So nice of you😊💻 New Appliance Repair Blog - lots of DIY Fixes for Your Home Appliances - Click Here:
ApplianceFixes4You.com
Great info..thanks so much. Done in a few minutes. I'm trying to teach myself how to do stuff instead of going to the shop for everything... greatly appreciated 🤙🏽
Glad it was helpful! Did it get rid of that ABS warning light?
Yes sir😊
Thank you for making that video. I try my 2001 Chevy Tahoe at work I appreciate it.
Glad it helped😊👍
Great video! I’m having that EXACT issue on my ‘01 Yukon - completely intermittent - and I’d just bet that’s the problem. Thanks much for sharing, brother!
Thanks Cam,
I hope it works for you 😊
Don’t get too excited about this correcting the issue. Have the same car 03 Suburban and have worked this ground as well as several others and am still chasing this issue. I now think it is in the ABS module with dry loose solder joints. Thanks for posting!
Same here 02 Tahoe
Pull your abs relay so it doesn’t kick on and cause you to wreck. I had it happen too many times to me. I pulled mine and doesn’t try to kill me anymore..
Rob Miller . Where the relay located
@@devinsanders8353 fuse box under the hood.
Soldered mine. Lasted about 4 months before the lights came back on. Can’t believe these modules are still several hundred $$. Can’t find them new either, just rebuilt.
I had the same issue going crazy on how to fix it... Thanks for your video it was very helpful....
Awesome, thank you👍
Worked for my 2004 Yukon! Thanks!!
Thanks Leslie😊👍
Awesome video! I'm going to try this out on my Yukon. Both the ABS and break lights are on.
Did it work?👍
@@ScottTheFixItGuyChannel I haven’t tried it. I have to wait till the weekend when I have more time.
I have a 2009 Tahoe with the same problem, I’m trying this tomorrow. Thanks!
Did it work?
I have the same problem,going to try it tomorrow.
Thank you for the video!
Thanks Will,
Good luck👍
I've actually done this previously on my 00 Tahoe and my 05 Yukon XL is doing it now too. Just wanted to see if you had any different info or methods that I hadn't seen. Pretty cut n dry, really.
One tip though, the bolt and being clean is just as important to the completion of the ground as the ring terminal and grounding surface. All of them help to establish a good ground. I even went as far as to ream out the hole, clean both sides of that ground point, and use a fresh bolt, a washer on either side, a lock washer and nut just to ensure the best ground possible... Then finished it off with some dielectric grease. It's a little OCD, but if you live in the rust belt, there's no such thing as overkill.
Great video though!
Great info. Thank you👍
Wooow! It’s helpful, thank you for video
Awesome,
Thank you😊
I also wanted to mention my traction control light and service stability on the information screen is coming on after I did this cleaning of the terminals so any ideas..?👍
What did you do?
I have a 2002 suburban 1500 4 wheel drive and I only have one ground right there but I’m literally about to just clean the one that’s there
Please let us know if it works👍
thanks
You’re welcome 😊
Thank you so much I will try that
I see success in your future👍
@@ScottTheFixItGuyChannel Hope success is mine also ❤️ I’m headed to mechanic tmrw morn bc of check brake system message on Chevy Tahoe Z71 ‘05
What if the abs is on and the brake light is on and as the pedal is press down you hear air and pedal goes down and it's very loose? I checked all fuses and fluid leaks and nothing. I think it's the power booster? I have a 1999 Olds Bravada
That’s air that got into the break lines or a failed power booster.
Got to get that fixed . Very dangerous problem.
I just wanted to say I followed your video to a "T", and I even use the diet electric grease method one of your commenters made and still I have those lights not sure if they take a while to go off but yours went off instantly in mine did not can you give me an idea of what direction I should take next to try to eliminate those lights I would really appreciate any advice or help you could give thank you kindly
This happened in my 04 avalanche and now on my 05 Yukon. On the avy I actually had to remove the abs module and solder the connections on the motherboard.
Also on my avalanche the lights were constantly on and on my Yukon it’s just an intermittent occurrence
The e brake gets a little stuck yu have to pull on the e brake release and using yur hand grab the emergency brake pedal and pull up on it at the same time the blinking e brake on dash shud go away and the chiming stops
Good solution 😊
I did this still hasn't resolved my problem
thank you you are full help me ya
You’re welcome, I’m glad it worked😊
Thanks god bless
My abs and brake light is on and my ac stops working and my transmission is acting weird but when the light go away the ac comes back on and the transmission problems are no longer there
Did what u showed and still didn't work
Hi Isaiah,
I think you have a fuse that’s common to all those things that needs to be replaced 👍
I have the same issue on my 03 Tahoe,ABS and break light is on and A/C doesn’t work also my 4wd indicator switch doesn’t change, i’ve tried all these ground videos and still nothing. Whats the next step?
Also have the same issue with the lights and no heat. Any ideas?
I have a 2004 gmc yukon
I tried this already twice and nothing anything else?????
Mines to
mine not mines
I've decided to just ignore warning lights and electrical gremlins.
There you go, just turn up the radio😂
Put some blue painters tape over the lights 👍