I fixed the low level washer fluid light issue. It was EASY.

Поделиться
HTML-код
  • Опубликовано: 21 янв 2024
  • This will probably work on most Subaru Vehicles and maybe others. My original plan was to remove the float piece from the sensor to eliminate the "low fluid" notification, but this was way easier. This is a 2017 Subaru Forester XT, and this should work from the 2014 - 2018 standard and XT models.
    My Production Gear:
    Camera - amzn.to/2PkiBu4
    Sigma 16mm - amzn.to/3r3yMd5
    11-22mm - amzn.to/3QkMbv4
    Shotgun microphone - amzn.to/2O8sdHw
    Wireless Mic - amzn.to/3tMGgaC
    GoPro - amzn.to/38V0q3T
    Drone - amzn.to/395qLwL
    Insta360 - amzn.to/3QCnyvv
    Disclaimer: I receive a small commission from qualified purchases through affiliate links. So, if you use the links provided, thank you for supporting the channel.
    Fix for washer fluid sensor

Комментарии • 34

  • @JeremySamuel-u4m
    @JeremySamuel-u4m 17 часов назад

    Thanks! My low fluid level light has been on for about a year now and Tucson Subaru was going to charge me $75 just to tell me what I already knew. Thank goodness I don’t have to remove the bumper to access it! Again, thank you for the video! Jeremy 2018 Forester XT

    • @rywanders
      @rywanders  13 часов назад

      Glad to help! I like saving $ and helping others do the same. Enjoy the blank notification space it’s nice lol

  • @TheCrowdPhoto
    @TheCrowdPhoto Месяц назад

    Thanks for the video, it worked on my 2017 Forester !

  • @DivineKaze
    @DivineKaze 2 месяца назад

    Worked like a charm on my STI

  • @gabrielg310
    @gabrielg310 Месяц назад +1

    I have a 2017 Forester, the light has been on for a year and just annoying. The dealer wanted $500 and the cheapest I was able to find was about $220. (on the Forester you have to buy the entire reservoir, not just the sensor. Off market reservoir is about $65 but not worth the hustle of relacing it, imo) I don't really need that indicator and I didn't wanna spend all that money. This worked! Thank you very much!

    • @rywanders
      @rywanders  Месяц назад

      💯 why I just did this. Glad I could help!

    • @ronrosati8896
      @ronrosati8896 18 дней назад

      @@rywandersdo you really have to tape it up

    • @rywanders
      @rywanders  18 дней назад

      @@ronrosati8896 probably not, but I wanted to keep debris from getting into it Incase the next owner would like to fully replace it.

  • @Shalom65
    @Shalom65 Месяц назад

    Thank you! My 2017 Forester has exactly the same problem.

  • @DJMadVibes1
    @DJMadVibes1 Месяц назад

    My 2019 WRX has this issue right now. I kept topping the resovoir to no avail. I will most likely do the same fix since I don't plan on keeping this car. I need to get rid of all little things before I trade it in.

  • @Ruikesan
    @Ruikesan 2 месяца назад +2

    Mine's been giving a warning off and on, so i filled it up and still says low. So yeah, it's not mission critical, just gonna unplug it and put an inop. sticker on it.

    • @rywanders
      @rywanders  2 месяца назад +1

      Exactly. This is a luxury I can live without for the headache it would take to actually fix it.

  • @mikeopeka9900
    @mikeopeka9900 2 месяца назад +2

    This same thing happened to me with my 2020 wrx. Indicator came on, i filled the reservoir. Indicator did not turn off. At least not right away. About a week later it was off. So, give it a little time to reset itself before you start worrying lol

    • @rywanders
      @rywanders  2 месяца назад +1

      Yeah mine wasn’t resetting. What happens is the float sensor no longer floats to show full. So you either replace the unit or unplug it. Thanks for sharing this though because maybe some of you do need to give it a sec to reset

    • @mikeopeka9900
      @mikeopeka9900 2 месяца назад +1

      @@rywanders it literally took a week, i had started looking into a new sensor and other options. But to my surprise, it finally reset and all is good. I will just periodically fill the reservoir to avoid the low sensor

    • @rywanders
      @rywanders  2 месяца назад +1

      @@mikeopeka9900 gotcha. Mine was like that for a year before I did this.

    • @mikeopeka9900
      @mikeopeka9900 2 месяца назад

      @@rywanders oh ok, i gotcha.

  • @richardfadera
    @richardfadera 5 месяцев назад +1

    Same issue wuth my Crosstrek... I guess I'll unplug it. Problem solved!

  • @dtasca3366
    @dtasca3366 6 месяцев назад +1

    Apparently you can't just buy the sensor. You need to buy the entire fluid container with the sensor.

    • @rywanders
      @rywanders  6 месяцев назад +3

      Yeah I looked that up afterwards and it appears that’s true. Screw that just unplug it lol. I’m sure Subaru will rip you $600 to put one in. Should be a recall with how common it is.

  • @trevorrotchell
    @trevorrotchell 3 месяца назад +2

    He doesn’t cover how to reset. He just unplug the sensor.

    • @rywanders
      @rywanders  3 месяца назад +3

      You’ll need a new sensor from where I unplugged it if you want it to work. If you break it getting it out you’ll need a whole new assembly $$ I’m not sure they sell just the sensor.

    • @Insanepatane
      @Insanepatane 2 месяца назад +3

      as per the service manual you'll need to replace the washer tank to fix a bad sensor. there is no reset. it's an integrated part in the tank. about $65. there also might be gunk built up on the sensor and it may need cleaning.

  • @kendallevans4079
    @kendallevans4079 3 месяца назад

    It's more difficult than I thought it was going to be.
    First, don't think you'll be able to remove just 1 or even 2 of the screws holding the shroud on, you have almost zero room to get your hand(s) in there to remove the sensor connector. Your going to need as much room as you can get to get your hand in there and remove that connector.
    Update: 4-6-2024: Just snipped one of the wires. The hell with removing the connector, there is just no space in there to get even one hand to pinch the connector

    • @rywanders
      @rywanders  2 месяца назад +1

      Sorry, not sure why you had so much trouble should have been enough space removing those clips and maybe 2 screws that whole plastic peace nearly comes out.

    • @kendallevans4079
      @kendallevans4079 2 месяца назад

      @@rywanders It's not your fault! It most just having the room in there. The senor is almost in a "channel" with very little room but just sniped one wire and all is good. I'm just glad that darn light is off! I'm like you, don't like those things on all the time

    • @frankyvee1
      @frankyvee1 Месяц назад

      @@rywanders Different year model or make maybe. I see this a lot with auto repair videos one person says it's easy and the next says it's impossible.

    • @shawnheidingsfelder8179
      @shawnheidingsfelder8179 10 дней назад

      Some people have girly hands and kids tools, and some can't get their gigantic hands in small spaces, let alone a tool in hand.

    • @ronrosati8896
      @ronrosati8896 7 дней назад

      I unplugged mine and the light is still on, I have a 2020 outlander sport. It’s rough getting under there , I can’t actually see what you’re unplugging! Is it the piece on the bottom with a wire coming out , I’m thinking that will drain all the washer fluid out

  • @albert5828
    @albert5828 Месяц назад

    Uh “fixed” is a bit of a stretch. You don’t “fix” your aching foot by cutting it off 😂

  • @teebzr5975
    @teebzr5975 2 месяца назад +1

    Subaru have become garbage, i had no issue with my 2005,