I'm convinced. ..thanks man..I need something for daily street driving with moderate bumpy roads, and I def. like these over the teins. nice review. cheers :)
Are they the std kit or ultra low? Like the fact they are have a good quality ride. Probably down a lot to the fact they are body adjustable and not spring adjustable. Great review.
I just put these coilovers on my focus st mk2 and they are really great! The only problem is that sometimes they make a “ knock” noise AFTER I leave a bumb.. Do you have any ideas about what’s could be wrong with the setup?
Hey! Couple of things I've noticed when putting on any aftermarket coilovers. Check these things.. First and most likely would be the lower lock rings, both on the height adjustment and the spring pre-load adjustment. Next would be front swaybar end link's, just make sure those are tight, and then last would be the top hats. Make sure the center nut is tight, and then make sure the camber adjustment bolts are tight and then of course the nuts that attach the coilover to the strut tower. Now, I should note that every time I install coilovers, I always go back under and check the lock collars, and about 90% of the time, I usually have 1 or 2 that are just slightly loose. But once you get it the 2nd time, I never see them loosen again. Hope this helps! Thanks, Rick
RallySport Direct Ultra thank you! In the next few days I will go to my service spot and I will check everything as you said. You have been more that helpful! When I have results I ‘ll let you know! Thank you!
I'm convinced. ..thanks man..I need something for daily street driving with moderate bumpy roads, and I def. like these over the teins. nice review.
cheers :)
I just found out I have these on my car. How easy is it to adjust them?
Are they the std kit or ultra low? Like the fact they are have a good quality ride. Probably down a lot to the fact they are body adjustable and not spring adjustable. Great review.
super helpful.. as always:) does this car have an aftermarket blow off valve?
I just put these coilovers on my focus st mk2 and they are really great!
The only problem is that sometimes they make a “ knock” noise AFTER I leave a bumb..
Do you have any ideas about what’s could be wrong with the setup?
Hey! Couple of things I've noticed when putting on any aftermarket coilovers. Check these things.. First and most likely would be the lower lock rings, both on the height adjustment and the spring pre-load adjustment. Next would be front swaybar end link's, just make sure those are tight, and then last would be the top hats. Make sure the center nut is tight, and then make sure the camber adjustment bolts are tight and then of course the nuts that attach the coilover to the strut tower. Now, I should note that every time I install coilovers, I always go back under and check the lock collars, and about 90% of the time, I usually have 1 or 2 that are just slightly loose. But once you get it the 2nd time, I never see them loosen again.
Hope this helps!
Thanks,
Rick
RallySport Direct Ultra thank you! In the next few days I will go to my service spot and I will check everything as you said. You have been more that helpful!
When I have results I ‘ll let you know!
Thank you!
The music is too loud to pay attention to his review