I acually used this video as an introduction into getting patterns through blender. Thank you so much for this video. Even tho i'm eorking on an odst and not a overwatch character it still helped to get a more "true" model to work with!
Thanks so much for this tutorial, since they change their paths a lot, most information I found about ripping models was out of date, and kept confusing me over the multiple programs needed. This is straight to the point and step by step, thanks so much!
Check forum first before asking why it stopped at Tooling/initializing! overwatch updates ALOT so try to update the quickdatatool first before asking "DURRR WHY IET NO WURKZZZ?!?!?!" still dont work, check forums last page for info, and if anything be patient till the guys update the software :)
Awesome video as usual may I give you a little feedback ? you may be used to your bird sounds, but when i watch your video in high volume it hurts my ears :P Thank you so much for your valuable content and good luck
hey fantastic video, im actually going to export the model and 3d print it out! ive had great success with doing that with fortnite models. you explained this incredibly well thanks a lot.
Fixed it just update it by clicking Help and Update I have an error??? Pls help! CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm
I tried this and it didn’t work, all I want from the files is The image of player icon for Pharah Aviator skin with higher resolution, can you get it for me, please? >.
Hi-ya! I actually have the same question as @Kuaymou only for Ashe's arm parts as well as several parts for Bob. I was wondering, considering this video is now outdated, if you have any suggestions for me? I know very little about coding but my friend has a 3d printer and told me if I can get him the models, he will print them for me. I could really use your help! Thanks and I'm praying I hear back from you in the near future. Until then, have some roses! 🌹🌹🌹
i have the bob model fully unfolded for pepakura in my fb group workshop weeners, you could port those back to 3d obj files however direct ingame models are not great for direct 3d printing... very low poly and no thickness to them.
Wayne's Workshop Wayne's Workshop hi again. So after doing a lot of research on my own, I have learned how to give pepakura files an actual thickness (it’s more stupidly complicated than it sounds). I will begin my work on bobs arm parts after midterms week has ended but I am wondering if you or someone you know has any Ashe pepakura arm files? Thanks again so much for your reply earlier it steered me away from a bad path to making my Cosplay. Until we speak again, have some roses 🌹🌹🌹
Hi Wayne, Thank you for making this tutorial. I have a question. How do I keep the model upright? When I delete the model skeleton, it does something weird and lays it flat on the grid. I'm not really great with blender, so I'm a bit confused as to why did that instead of staying straight up like in your tutorial.
Loading APM TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm No CMF procedure for build 13298688, trying closest version Using CMF procedure 46836 CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm Can somebody help me please? I don't know what or where I should download the new things
Actually, after messing around with the QuickDataTool for a bit I found out it doesn't work with the current version of Overwatch and I've got no idea if it will be updated... Probably best to learn to use the datatool using cmd
My process stops after Finding and gives error.... Unhandled Exception: System.DllNotFoundException: Unable to load DLL 'librevorb.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Disable the conversion of sounds. The dll called libreverb.dll is for x86 only, you're probably running the tool on x64 (which is required for Overwatch).
I get this error: No CMF procedure for build 45752, trying closest version Using CMF procedure 45420 CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm How do I update the CMF procedure?
either your overwatch is outdated or your casclib file, like i said in the beginning of the video, check the forums linked in the description for additional info, overwatch keeps updating so the files to extract also need updating.
apparently its listed as a hero, when i list it, its apparently called "Training Bot" but i tried to extract it myself but indeed doesnt seem to want to do it, sorry man, for heroes it seems to work fine but not Npcs (yet)
thanks for the reply, at the moment I still can't import the heroes models neither... probably some incompatibility with datatool and my pc (once started just blocked on initializing..
initalizing stuck is usually because its named wrong, for example, Lúcio has to be typed with that thingi on the u and not typed as lucio, try something simple like Tracer or Pharah, and then without all the filters
Katie Patterson once you extracted a character, there is a folder in that character folder called textures. Usually it's 1 of the biggest size files, you can simply drag and drop them onto your model in blender, make sure model is selected/highlighted or switched to edit mode
Hmm I have a problem that it just stops extracting gives no error or anything "Loading APM TactManifest/Win_SPWin_speech_RDEV_LenUS_EExt.apm Using CMF procedure 47452 Mapping... Adding Encryption Keys... Tooling... Initializing..." thats where it stops nothing after that.
always update quickdatatool first, and check the forum also for casclib updates, overwatch updates often so everytime the devs of the extraction tool have to update with them, sometimes takes a few days, check the forum, link in description. also the entire command must be correct, if its a skin you can always just try to just enter the hero name and let the software run to extract them all, youll still get the one you want in the end ;)
its updated, download it, run it, then go into "help and update" and run the updater. overwatch just released a new patch a few hours ago so a new casclib is needed, check the facepunch forums last page to see once that drops so everything works again, a little patients is sometimes needed
in the video, the description and in the pinned post are messages regarding this... this stuff updates alot, so you need to aswell... quickdatatool has a built in updater, just run it, if it still doesnt work, check the facepunch forums (also in description)
I acually used this video as an introduction into getting patterns through blender. Thank you so much for this video. Even tho i'm eorking on an odst and not a overwatch character it still helped to get a more "true" model to work with!
Thanks so much for this tutorial, since they change their paths a lot, most information I found about ripping models was out of date, and kept confusing me over the multiple programs needed. This is straight to the point and step by step, thanks so much!
Check forum first before asking why it stopped at Tooling/initializing! overwatch updates ALOT so try to update the quickdatatool first before asking "DURRR WHY IET NO WURKZZZ?!?!?!" still dont work, check forums last page for info, and if anything be patient till the guys update the software :)
Awesome as usual! I learned a lot with this vid, thanks!
can pleas make an up-dated vershon of this
Awesome video as usual
may I give you a little feedback ? you may be used to your bird sounds, but when i watch your video in high volume it hurts my ears :P
Thank you so much for your valuable content and good luck
toohardanouar yeah they can be loud. In the workshop it's not that big a problem but here in the living room it's a different story.
hey fantastic video, im actually going to export the model and 3d print it out! ive had great success with doing that with fortnite models. you explained this incredibly well thanks a lot.
Amazing video. learnt alot. Thanks
How can we add textures ?
This was perfect, thank you.
can you make a tutorial to extract and import materials and animations for overwatch models and maps too?? pls
How extract other languages, polish for example?
Fixed it just update it by clicking Help and Update
I have an error??? Pls help!
CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm
Can we extract in-game areas/sites too? There's this really cool place from a game I'd like to experiment with.
Hey with armorsmith can it be used to extract templates for clothing on a model? for example tabard on a character
hey guys am trying to open links but its not working can somone help pls
Hrm.
The build job does not contain any artifacts.
Do you have a new URL? for Quickdatatool thanku bro
I tried this and it didn’t work, all I want from the files is The image of player icon for Pharah Aviator skin with higher resolution, can you get it for me, please? >.
Hi-ya! I actually have the same question as @Kuaymou only for Ashe's arm parts as well as several parts for Bob. I was wondering, considering this video is now outdated, if you have any suggestions for me? I know very little about coding but my friend has a 3d printer and told me if I can get him the models, he will print them for me. I could really use your help! Thanks and I'm praying I hear back from you in the near future. Until then, have some roses! 🌹🌹🌹
i have the bob model fully unfolded for pepakura in my fb group workshop weeners, you could port those back to 3d obj files however direct ingame models are not great for direct 3d printing...
very low poly and no thickness to them.
Wayne's Workshop Wayne's Workshop hi again. So after doing a lot of research on my own, I have learned how to give pepakura files an actual thickness (it’s more stupidly complicated than it sounds). I will begin my work on bobs arm parts after midterms week has ended but I am wondering if you or someone you know has any Ashe pepakura arm files? Thanks again so much for your reply earlier it steered me away from a bad path to making my Cosplay. Until we speak again, have some roses 🌹🌹🌹
@@MegaGinger125 I think the Ashe model is also in my FB group, just not unfolded, if you need a foam unfold for it it is available cheap on my Etsy
Hi Wayne, Thank you for making this tutorial. I have a question. How do I keep the model upright? When I delete the model skeleton, it does something weird and lays it flat on the grid. I'm not really great with blender, so I'm a bit confused as to why did that instead of staying straight up like in your tutorial.
MeilingT888 some models do that. Select the model, hit R to rotate and then x,y or z to rotate on that axis
Thank you!!
when I do the maps in blender it crashes
Loading APM TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm
No CMF procedure for build 13298688, trying closest version
Using CMF procedure 46836
CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm
Can somebody help me please? I don't know what or where I should download the new things
Are you going to any of the Dutch comic-cons this year?
the one in march im skipping for once, the winter one i dont know yet :)
Is it possible to extract maps fromoverwatch
Hey, do you know how to extract Monster Hunter World Models?
Is it possible to import them into Maya or is it best to import to Blender and export for Maya?
bunnster22 I never use Maya but feel free to experiment
probably better in maya. Blizzard mostly works in Maya.
Could you send me the file if the link QuickOverTool.exe is not coming?
Here is a new link I found on the wiki and which worked for me: ci.appveyor.com/api/buildjobs/7umda0to1yettvdp/artifacts/output%2FQuickDataTool.exe
Actually, after messing around with the QuickDataTool for a bit I found out it doesn't work with the current version of Overwatch and I've got no idea if it will be updated... Probably best to learn to use the datatool using cmd
is it possible to extract the maps blizzard world for 3d models ?
Mr.Panda maybe, would be pretty sweet, especially just as maps for vrchat
Can this also be used to extract WoW music?
My process stops after Finding and gives error.... Unhandled Exception: System.DllNotFoundException: Unable to load DLL 'librevorb.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Disable the conversion of sounds.
The dll called libreverb.dll is for x86 only,
you're probably running the tool on x64 (which is required for Overwatch).
I get this error:
No CMF procedure for build 45752, trying closest version
Using CMF procedure 45420
CMF Procedure is outdated, cannot parse TactManifest/Win_SPWin_RDEV_LenUS_EExt.apm
How do I update the CMF procedure?
either your overwatch is outdated or your casclib file, like i said in the beginning of the video, check the forums linked in the description for additional info, overwatch keeps updating so the files to extract also need updating.
can't import Training bot models or NPCs model is there something different for those? @Wayne's Workshop
apparently its listed as a hero, when i list it, its apparently called "Training Bot" but i tried to extract it myself but indeed doesnt seem to want to do it, sorry man, for heroes it seems to work fine but not Npcs (yet)
thanks for the reply, at the moment I still can't import the heroes models neither... probably some incompatibility with datatool and my pc (once started just blocked on initializing..
initalizing stuck is usually because its named wrong, for example, Lúcio has to be typed with that thingi on the u and not typed as lucio, try something simple like Tracer or Pharah, and then without all the filters
Wayne's Workshop tried Phara without any filter... Stil stucked... Losing hope, and the forum can't verify my mail so I can't ask there
beats me man, if your overwatch is updated and the latest updates of casclib and datatool are there then it should work...
Can you make a tutorial to extract a model with the animations ? xD
goddamn birds in the background are SOOOO lound... i got bleeding ears now... :(
yeah i learned from that mistake :P birds are now moved every time recording gets done in the living room ;)
Can we no longer use this? I can’t find a way to update the files :/
CAN SOMEONE EXPLAIN TO ME HOW TO GET THE TEXTURES AND COLORS ONTO THE CHARACTERS
Katie Patterson once you extracted a character, there is a folder in that character folder called textures. Usually it's 1 of the biggest size files, you can simply drag and drop them onto your model in blender, make sure model is selected/highlighted or switched to edit mode
now can use?
New video please ^^
havent looked into anything OW2 yet
Is this still working on 2020?
Hmm I have a problem that it just stops extracting gives no error or anything "Loading APM TactManifest/Win_SPWin_speech_RDEV_LenUS_EExt.apm
Using CMF procedure 47452
Mapping...
Adding Encryption Keys...
Tooling...
Initializing..." thats where it stops nothing after that.
always update quickdatatool first, and check the forum also for casclib updates, overwatch updates often so everytime the devs of the extraction tool have to update with them, sometimes takes a few days, check the forum, link in description. also the entire command must be correct, if its a skin you can always just try to just enter the hero name and let the software run to extract them all, youll still get the one you want in the end ;)
Wayne's Workshop I'll see because I did updated it before I started to extract it
Steven Cano it's pretty picky about it's command line. It does work though, I just extracted all torbjorn skins so should be working
Wayne's Workshop ok I'll try it again when I get home ty
the files, now dont exist ...
but wheres addon link ? ;-;
Have you extracted Halo models? Id love to see a video for that
Svan Melms i think those are downloadable from the internet
The Scroll Wheel Podcast not all of them. Not much more than weapons and spartan armor has been pulled from the newer games.
Svan Melms aah okay too bad man
I need the model of Bob, the partner of Ashe!!
What happened to asking nicely?
@@Costronica Oh sorry i'm not asking for, it's only a innecessary coment cause i found this video interesting xD
Do this work for WoW?
Stills works?
Link to quickdatool is dead, need update
its updated, download it, run it, then go into "help and update" and run the updater. overwatch just released a new patch a few hours ago so a new casclib is needed, check the facepunch forums last page to see once that drops so everything works again, a little patients is sometimes needed
Can someone give me 3D Model files of Sigma?
*please
Is this high poly
No
no funciona D:
does this method work right now? (september 2018)
Check the forums last page (link in description) also don't forget to run the updater in the extraction tool
is this outdated?
no, i lied
@@Costronica liar !
hello friend can you pass me all 3d models please it's not that I can not get it out myself I'm your sub
hi,
an error comes out.
No CMF procedure for build 49154, trying closest version
Using CMF procedure 46836
CMF Procedure is outdated, cannot parse
in the video, the description and in the pinned post are messages regarding this... this stuff updates alot, so you need to aswell... quickdatatool has a built in updater, just run it, if it still doesnt work, check the facepunch forums (also in description)
ty! :)
Is it possible to extract limited legendary skins such as officer d.va?
폴폴이 all skins are still in game so yes
Wayne's Workshop then can i extract overwatch:retribution's talon soldiers or ships' models? Or can i extract Halloween events' mobs?