How To Use EQ Section on Analogue Mixer To Make Vocals Bright And Clear
HTML-код
- Опубликовано: 16 окт 2024
- BEST ANALOGUE MIXERS WITH GOOD EQ
On AMAZON
Allen & Heath ZED-420 (16 mono, 4 Stereo inputs) amzn.to/4cT1q8Y
Allen & Heath ZED428 (30 Channels) amzn.to/3zHzEgH
Mackie ProFX22v3 22-channel Mixer amzn.to/3WryYVN
Does it seem daunting to use the EQ section on your mixer? Here's a simple and detailed video to guide you through the process so you can have a bright vocal coming out of your speakers.
00:21 Step 1: Set the Gain correctly
00:32 Practical for Step 1
00:51 Step 2: How Sound Frequency Works
1:30 Step 3: Get rid of Muddiness
1:44 Practical for Step 3
2:08 Step 4: Get Rid of Unpleasant Frequency
2:54 Practical for Step 4
3:33 Step 5: Boost the High Frequency To Spice Up
3:50 Practical for Step 5
#audioproduction #mixer #wing #behringer #yamaha #wharfdale #music #churchmedia #equalizer #equaliser #eq #analoguemixer #soundproduction #soundengineer #soundengineer #audioengineer #livesound #proaudio #sound #music #soundsystem #prosound #linearray #audio #recordingstudio #musicproducer #loudspeaker #producer #stagesound #linearraysystem #soundengineering #livesoundengineer #musicproduction #soundequipment #mixing #pasystem #recording #subwoofer #stageaudio #studio #foh #churchsound #tregostudioz
Found this right when I needed it to fix my worship team’s sound. Thanks for the great content!
Glory.
Thanks for taking your time to give your comments.
This was great. Can you make a video explaining what each of the High, Mid and Low knobs does on analogy mixer. I'm using Yamaha MG16XU Mixer.
Alright. I will look more into that in future videos
@@tregostudios thanks. It will greatly help
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
You have a great skill on explaining things in an understandable manner. Keep it up, you re going higher
Amen. Thanks brother
Great stuff. Please can you expatiate a little bit on the role of the FREQ knob. I’d be glad, thank you 🙏
The frequency knobs help you to choose what specific frequency you wish to alter. Usually that's in the mid section.
You need to have a basic understanding of how sound is classified into different frequencies. That is when you can make accurate decisions with these knobs.
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
Beautiful.
Please how do I setup sound from mixer to camera-computer for church stream using obs
so touching for an excellent video
Thank you
Thank you so much dear.
Your video is very helpful. But I need your guidance . Is it not also possible to connect and use Rode Wireless Go II or Wireless Pro through a mixer to an amplifier to use the system for addressing a gathering from a stage ,using the Rode wireless mic ,as a hands free mic ? Also please give me any other guidance or caution in this matter, if you have any ,because I am not an expert .
Thank you .God bless you.
Kindly reach me on Whatsapp for better communication. +2347032844129
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
Good teaching
Glad you think so!
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
I'm flabbergasted...
Please I'll like to see a video on
1. setting an equaliser itself
2. Settings for a talking drum, bass guitar, saxophone, lead guitar and kick
Noted. I'll add this to my shooting plan. Hope you've subscribed to the channel so you can be notified when we post that video
what is the best volume for Gain , Comp, high Mid Low for dynamic microphone .
even if your heating a highnotes theres no effect and sounds perfect . for example 12 oclock 1 oclock? can you give me hint for that?
There is no one size fits all. It will vary depending on the mixer you're using. Because preamp is responsible for the gain response. And different mixers uses different preamps. So you have to work with the capacity of your mixer.
The easiest route is to watch out for the red lights. There's a clipping light beside the gain that suggests to you that your signal is clipping, always avoid that.
im using behringer x12222 . im looking for a clear voice and louder
Depending on the speaker. If it's a male speaker, you want it to have a little base, say 1'o clock. But if it begins to add too much of blasting at the plosives, reduce it.
However when it's a bad singing, even if it's a male voice reduce the low to say 10' O clock cause that's where the muddiness in mixes come from.
Females mostly do not require low ends so try and get rid of it to get a clean mix.
Always look for what to remove in kids, rather than trying to add it. Usually you want to get rid of anything that affects the clarity of the voice:
Muddiness around 400hz
Honkiness around 500Hz - 1kHz
You can remove up to 10' O Clock. Listen to hear the effects and adjust where necessary.
The high frequency brings out the brightness and air in the voice. But when you notice it is exaggerating the sibilance, reduce it. When it sounds to harsh, it can easily fatigue the ears and they're quick to cause feedbacks.
Thank you
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
Great stuff
Glory to Jesus Christ
Thx for the sauce
Any time. Thanks for taking time to give your feedback.
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
What mixer brand are you using ?
Good morning trego.
Can I use a box mixer (powered mixer) to power a plain mixer( unpowered mixer)?
Yes you can
@@tregostudios How?
What outputs should I use ? What's the connection?
Video so helpful, thank you so much ❤
You're most welcome.
God bless you
Thank you so much
Thank you. And yes amen - the glory of the latter shall be greater than the former.🎉
please whats the name of the console the lady in this video is using?
Our church mixer company is soundcraft nano m16 what is the best for Mic channel line.
I'm not sure I understand your question very well. But I'd you're referring to the use of EQ, the principles are basically the same
Thanks
You're welcome
God bless you too😊
Amen
Pls.what mixer are u using
The mixer used in this tutorial is a 16 channel mixer, just a base level mixer to demonstrate this tutorial. It's not the best. But just to show that we can still do something with the little we have.
Nice bruh 👏
Thanks man
Great
I have been using mixer to get voice but I get some echo, how can I get rid of such?
There's an echo effect applied on the mixer, if you can locate the effect volume, you'll get rid of it.
For more help to you can book a session with me on WhatsApp 07032844129
Midle you wrong ajust it.that one for select frequency,other one to boost or cut the frequency
please, I want to ask. if i have a personal monitor mixer behringer p16 and i have an analog mixer but i do not have a direct out . So what should I do ? i have 2 aux only
Hello Peter, if your mixer doesn't have a direct out but you have an Insert I/O, then you can still get the job done if you have a Behringer p16-i
(check this link www.behringer.com/series.html?category=R-BEHRINGER-POWERPLAYSERIES)
All you have to do is to insert the jack cable into your mixer i/o half way so that it doesn't interrupt the flow of the signal to the main feed, and then connect the other end of the cable to your p16-i. Repeat this process for each of the channels you want to get across to the p16.
Then you can go from your p16-i to your p16-m for monitoring.
I hope this helps. Feel free to ask if you still don't understand.
@@tregostudios can i use TRS normal put on insert on mixer without using insert jack cable ?
2. the page do not open ?
I don't get your first question.
However as regards the second question, you can just search for the Behringer power play series
I don't recommend too much gain it burns speakers leave gain at least at the unity position
Right
Pls do a video on how to set for keyboard to make it sound better
Noted brother
I will be anticipating
You're welcome. I'm glad to help. Kindly join my WhatsApp community to learn more. chat.whatsapp.com/JOQ9IKFBrInGNCEckFVrRf
Are you using eq for this?
I'm using the EQ on the mixer
Too much of "Mumbo Jumbo". The picture keeps moving with no focus on the appropriate knobs. Did not help me at all.
So sorry about that. Kindly try to watch again and ask specific questions where it gets confusing. Perhaps I'd be able to help you.
Thanks for taking time to watch and comment.
Not eq on the mixer
It's the EQ on the mixer
Couldn't understand most of what he said.
Really?
Could you be more specific. Is it the language or the terminologies? Would you want clarification on some parts of the video?
@@tregostudios Hi. It's not a terminology or necessarily a language issue, but the strong accent. I could make out some of what was said, but not most. Thanks, I appreciate the response though. Most people don't follow up with their viewers because it is very time consuming.