Thank you for your vlog about how to connect mixer, equalizer,cross over and amplifier tutorial vlog it's difficult to have a wonderful connect ion.thank you again for your vlog brother.
This is the best explanation that I ve seen.very clear and very precise. Well done.can you do a tutorial on outputs on a mixer.explain where each outputs lead to.
Woww...just wow. With so little you have managed to deliver sir. Very important video you just shared. I am starting a PA System and i have been looking for such. Didn't know the use of the cross over until now.
Crossover is basically meant to separate the signal into dedicated frequency ranges for different speakers. In digital realm you can achieve very similar results sending your LR signal into Matrixes and filtering the sound in dedicated EQs. For example, using a low pass filter at 90-100 Hz separate the lows and send them separately into the Subs, then using high pass filter at the same frequency on a different Matrix and send the rest into the Tops...also, it could be done in more detail and separate the mids and the highs too, but it depends heavily on what speakers you are using, what inputs you have and all that jazz.
No he's not a good teacher. He should have everything he needs to teach read to be shown for a how to do. Good teachers will set up display ALL the items of a subject before properly and not with a camera to make a person feel dizzy. Not that it made Me feel dizzy, but his camera is not steady. All that equipment and no tripod/other for his phone? That IS NOT a really good teacher.
Thank you for this... Using this connection how many full range speakers can you power with this? And what if you need to have separate control for stage monitors and main house
Good job! Though I would have loved to see you explain the various working modes of the feature-packed crossover namely mono 4-way, stereo 3-way, and stereo 2-way. Also, a 2-amp configuration if you want to achieve a stereo sound. Probably do another video soon. Which mode on the crossover were you using on this video by the way?
Thanks for the video, well explained. My question is, how do you connect an Equalizer to a crossover if you are using two amplifiers, one amplifier for mid-speakers and the other amplifier mainly for subspeakers.
Just what I needed. Thank you so much sir for this. I do have one question though. How can you put the sub in one channel and mid in another in a left and right (stereo connection?)
good explanations, on how to set up. the only thing I would do differently is plug power leads into equipment first and switch them off in case of sudden power surges.?
@@nk-moza yes you can. Just connect signal cables from mixer to the crossover then from crossover to amplifier. Actually what really needs to pass through the crossover in such a setup is the signal you intend to send to your subs
My setup consist of a DDJ-SX3→behringer Xenyx analog mixer→2 ElectroVoice "18 subs and 2 ElectroVoice"15 speaker (powered) if I add an equalizer and a crossover would improve the quality of the audio? Or it's unnecessary? Saludos desde México! 🇲🇽
Hello Decibel Audio Kenya, am Samuel in Ghana and i love watching your channel. My church is having challenge with our church sound for many years which is reducing the church congregation. We have lots of equipment's (devices) but have challenge with our sound. We are using yamaha MG24/14FX mixer, dbx 166Xl compressor, dbx 231 graphic equalizer,MC100 sound enhancer, behringer multicom Pto-Xl audio interactive and dbx 234XL crossover... kindly assist me on how to connect these devices and and how to do the setting to get a good sound. Please help to build up mu church again. God bless you.
Thank you for your vlog about how to connect mixer, equalizer,cross over and amplifier tutorial vlog it's difficult to have a wonderful connect ion.thank you again for your vlog brother.
My first time seeing your channel but you are an amazing teacher....God bless your heart and team
Waaaaoh thank you
Very educative.
I'm new to learning sound.
I found this video very helpful.
Thank you very much.
Thank you so much Decibel Audio, this is the best tutorial I've watch on this subject.
This is great for the beginning of sound mixing thanks so much brother for Sharing your knowledge 💞 just love it
Bro Thanks, so much I really appreciate what you did God will blessed ur work in Jesus name. Am also sounds engr from Nigeria.
This is exceptional.
Thanks a lot.
All the way from Nigeria
This is the best explanation that I ve seen.very clear and very precise. Well done.can you do a tutorial on outputs on a mixer.explain where each outputs lead to.
Clean music, clean explanation! Thanks sir!
Keep posting videos like this,very simple to understand, thanks for the video.👍👍👍
Good tutorial sir I appreciate this vedio..thanks for sharing this content ❤continue to cheers this 👍
This is the best and simplest explanation I've had on this subject
My first time here but this is exceptional! Planning to come for some musical instrumentl.
I like it, bro...
This is very important for some of us who are still learning
God bless you brother. Very clear video. Easy to understand and learn
Good and clear explanation of using both the EQ and xover thank,s bro i appreciate your video,support for newbies.
Keep it uu with this good Work. It's such an educative and resourceful video.
Woww...just wow. With so little you have managed to deliver sir. Very important video you just shared. I am starting a PA System and i have been looking for such. Didn't know the use of the cross over until now.
We are glad you got the some.little knowledge to jam start your sound journey 😀
Crossover is basically meant to separate the signal into dedicated frequency ranges for different speakers. In digital realm you can achieve very similar results sending your LR signal into Matrixes and filtering the sound in dedicated EQs. For example, using a low pass filter at 90-100 Hz separate the lows and send them separately into the Subs, then using high pass filter at the same frequency on a different Matrix and send the rest into the Tops...also, it could be done in more detail and separate the mids and the highs too, but it depends heavily on what speakers you are using, what inputs you have and all that jazz.
I'm a sound engine looking for good place to sound
Thank you for sharing your experiences. Watching all the way from Vanuatu 😀😁👍🔥🔥🇻🇺🇻🇺🇻🇺
Big ups 💪 my brother much love from 🇰🇪
I appreciate the tutorial it's really professional
U're really a good teacher...I wish to join you for an upgrades
No he's not a good teacher. He should have everything he needs to teach read to be shown for a how to do. Good teachers will set up display ALL the items of a subject before properly and not with a camera to make a person feel dizzy.
Not that it made Me feel dizzy, but his camera is not steady. All that equipment and no tripod/other for his phone? That IS NOT a really good teacher.
Big ups from Ghana 🇬🇭
Love from India Kerala bro❤
Thank you so much for this video. It really helped me.
Great content sir 🙏🏽🙏🏽🔥🔥🔥🔥🔌
Good explanations..Love this 👍👍👍💓
Good job bro
Very impressively perfect 🥳👏🙌
Lovely bro. I learnt alot from your vlog.
Excellent video for me as a bigginers👍👍👍
Thank you for this... Using this connection how many full range speakers can you power with this? And what if you need to have separate control for stage monitors and main house
Awesome explanation...thank you..
like the other brothers said short sweet simple cleared up lots of things for me thank you!!!
Very good job and very,very,neat and clean explain nice vodeo bro
Nimekuerewa sanaa natokea tz😁👍
Very nice sounds ser.good job..
BOUGHT THIS CROOSOVER AT BAMBURI 3 DAYS AGO THANKS TO YOU
This is great explanation, thank you sir
I didn't think it'll be profitable buh.. you beat my expectations love from naija
Much love bro
That's so educative. ....and what about adding others like the bass enhancer and the compressor. ...please I need a video on that too...
Coming soon
Straight Outta Kenya! Cool video
Thanks for the love ...respect ❤️
The best explanation 💗💗💗
Thank you so much. You make it so simple
Thanks man,you helped me.
Wow! I love this! Masterpiece 👌❤️
Thanks for the love
Excellent video thanks for doing this.
Thanks bro this is very educative
Osam brother tq for teaching blessed more videos
Good job your video was so informative
Nice Work... !!! 🎶🦅🎶
Amazing video and sound systems
I have watched so many videos but I haven't seen a video that explains the way this one does.
absolutely informing Will visist your store for more
very nice demo sir..but all your equipment has so expensive price in the philippines..thanks for the idea
You are welcome.
Thanks.... I really do appreciate..... From Sierra Leone
Much love from kenya
one love from Namibia 🎉
Great job.Thank you
Is it a good idea to compress a whole mixing board through the main speaker output inserts with Y cable?
great video bro, thank you
That set up manipulate the pure sound & creates unclean signals, increasing unwanted frequencies going to the amplifier. But it works!
Best and cool. From Uganda
This is very educative and helpful. Can one bypass the amplifier if he is using the active speaker?
One love from Sierra leone 🇸🇱
One love ❤
merci pour les explications
Thank you so much Sir for you teaching us...
Good job! Though I would have loved to see you explain the various working modes of the feature-packed crossover namely mono 4-way, stereo 3-way, and stereo 2-way. Also, a 2-amp configuration if you want to achieve a stereo sound. Probably do another video soon. Which mode on the crossover were you using on this video by the way?
Thanks for the video, well explained. My question is, how do you connect an Equalizer to a crossover if you are using two amplifiers, one amplifier for mid-speakers and the other amplifier mainly for subspeakers.
Yeah how is that done
F
I have the same question sir thank you
Good job bro..
Good job I enjoy and learn.
Just what I needed. Thank you so much sir for this. I do have one question though. How can you put the sub in one channel and mid in another in a left and right (stereo connection?)
Thangs you. Bonaventure of Côte d'Ivoire/Africa
good explanations, on how to set up. the only thing I would do differently is plug power leads into equipment first and switch them off in case of sudden power surges.?
Good informative video. ...
Good explanation❤❤
Always the best decibel Maina thanks
My pleasure!
Great job well done
Awesome staff
Thank you s much sir... You teach me a lot😊😊😊
Am humbled 🙂
Great explanation
You are a good teacher
Thanks bro I'm learning a new thing
asante... I've never used an equilizer in a sound system but I sure know the goodness of having a crossover especially for the subs
so does it mean you can still setup like that but eliminate the equalizer and still have good sound?
@@nk-moza yes you can. Just connect signal cables from mixer to the crossover then from crossover to amplifier. Actually what really needs to pass through the crossover in such a setup is the signal you intend to send to your subs
Nice explanation
Do you add a mini hum eliminator in that settings too?
Good job 👍
My setup consist of a DDJ-SX3→behringer Xenyx analog mixer→2 ElectroVoice "18 subs and 2 ElectroVoice"15 speaker (powered) if I add an equalizer and a crossover would improve the quality of the audio? Or it's unnecessary? Saludos desde México! 🇲🇽
Nice tutorial. On the output results the mid was to high. That was noise to me. I recommend reducing the mid volume from the power amp
Thanks broe I will b following,am up coming PA system operator...gain sth.
very helpful .....so what if me have a separate pre amp where are how should i connect it ?
Your lessons are helpful you got 5star for that.
Thank you glad they are helpful
good video tutorial but i nees to learn more to understand. i got Peavey CS 3000, two times burn right channel because i was connected to power mixer.
Nice one, God bless you
Thank you
Great job
This is amazing thank you sir
gud work i like the lesson
Good work bro, need to know the name of the song that your testing with, it has really blessed me.
A good video.... Though it is more advisable to have rig the entire system first before powering on the hardware unit😇🙏
Hello I agree ..100 percent... Next time we put that in yo consideration
love it 👊👊
Hello Decibel Audio Kenya, am Samuel in Ghana and i love watching your channel. My church is having challenge with our church sound for many years which is reducing the church congregation. We have lots of equipment's (devices) but have challenge with our sound. We are using yamaha MG24/14FX mixer, dbx 166Xl compressor, dbx 231 graphic equalizer,MC100 sound enhancer, behringer multicom Pto-Xl audio interactive and dbx 234XL crossover... kindly assist me on how to connect these devices and and how to do the setting to get a good sound. Please help to build up mu church again. God bless you.
Good explanation
Waoo that is great 🇹🇿🇹🇿🇹🇿🇹🇿❤️❤️